PIC32MX120F064HT-I/PT - 32-bit 40MHz MCU 64KB Flash TQFP-64
부품 번호: PIC32MX120F064HT-I/PT ✓ 활성PIC32MX120F064HT-I/PT 개요
A 32-bit microcontroller (MCU) is a programmable system-on-chip integrating a CPU core, memory, and peripherals on a single die. 32-bit MCUs based on the MIPS architecture target cost-sensitive embedded applications requiring higher computational throughput than 8-bit or 16-bit alternatives, while remaining simpler than application processors. The PIC32MX120 family occupies the low-end of the PIC32 lineup, optimized for USB-less, cost-sensitive designs that still benefit from DSP and 32-bit arithmetic.
Key features include 64 KB Flash with self-programming support, 8 KB SRAM, two I2S and four SPI modules for audio codec and serial communication, Peripheral Pin Select (PPS) for flexible I/O mapping, a Parallel Master Port (PMP) with dual buffers for graphics interfaces, an integrated 10-bit ADC, and the Charge Time Measurement Unit (CTMU) for touch sensing. The device operates from 2.3 V to 3.6 V and offers multiple power-saving modes.
The architecture combines a 5-stage MIPS32 M4K pipeline with single-cycle multiply and hardware divide, achieving 1.56 DMIPS/MHz. Code execution is enhanced by a 4-channel DMA controller, dual I2C, two UART modules with IrDA support, and an RTCC for timekeeping. The PMP and CTMU peripherals distinguish this family in graphics and capacitive touch applications.
Typical applications include consumer electronics with audio playback, industrial control panels with capacitive touch keypads, low-cost graphical user interfaces via PMP to LCD controllers, USB host/device replacement using UART bridges, and home appliance control boards. Designers choose this part for cost-optimized 32-bit processing where USB and CAN are not required.
When designing with this device, note that PIC32MX1xx parts do not include USB or CAN peripherals; migrate to PIC32MX2xx for USB, PIC32MX4xx for CAN+USB, or PIC32MX5xx/6xx/7xx for higher performance. The PT (TQFP-64) package requires a 10 mm x 10 mm PCB footprint with standard 0.5 mm pitch, enabling hand-reworkability for prototyping.
드롭인 대체품: PIC32MX120F064HT-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MX120F064HT-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core Size, ADC, CTMU, Maximum CPU Speed.
PIC32MX120F064H-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX120F064H-I/MR
✅ 드롭인가격 문의
데이터시트 보기 →PIC32MX120F064HT-I/MR
✅ 드롭인가격 문의
데이터시트 보기 →PIC32MX120F064HT-V/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX230F064B-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX120F064HT-I/PT 최대 정격 & 전기적 특성
| Core Processor | MIPS32 M4K |
| Core Size | 32-Bit Single-Core |
| Max CPU Speed | 40 MHz |
| Program Memory Size | 64 KB (64K x 8) Flash |
| RAM Size | 8 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| 패키지 | 64-pin TQFP (PT) 10x10 mm |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40 C to +85 C (Industrial) |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| ADC | 10-bit ADC |
| DMA Channels | 4 |
| Data Converters | A/D 10-bit |
| CTMU | Yes (Charge Time Measurement Unit) |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
| MSL 레벨 | 3 (168 hours) |
PIC32MX120F064HT-I/PT 64-pin tqfp (pt) 10x10 mm 핀 구성 가이드
PIC32MX120F064HT-I/PT(64-pin tqfp (pt) 10x10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC32MX120F064HT-I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC32MX120F064HT-I/PT 적합 용도: 6 애플리케이션s: Audio Playback Devices, Capacitive Touch Keypads, Low-Cost Graphical User Interfaces, Industrial Sensor Hubs, Home Appliance Control Boards, Portable Medical Devices.
Audio Playback Devices
The PIC32MX120F064HT-I/PT is well suited for low-cost audio playback appliances such as Bluetooth speakers with external codecs, MP3 player boards, and intercom panels. Its dual I2S interface supports connection to external DACs and ADCs while the 40 MHz MIPS32 M4K core runs audio sample-rate buffers and DSP mixing in real time. The 64 KB Flash accommodates WAV decoding libraries and small UI state machines; 8 KB SRAM is sufficient for double-buffered audio frames at 48 kHz stereo. Unlike PIC32MX2xx variants, this part has no USB peripheral, so designs that need USB audio class should migrate to PIC32MX230. Designers typically pair this MCU with a separate audio codec over I2S and a Class-D amplifier driven by PWM.
추천
Capacitive Touch Keypads
The integrated Charge Time Measurement Unit (CTMU) makes the PIC32MX120F064HT-I/PT an excellent fit for capacitive touch keypads on appliances, industrial control panels, and consumer electronics. CTMU measures the time constant of an RC network formed by each touch pad, enabling sub-1 pF resolution sensing with no external touch IC required. The 40 MHz core runs the scanning loop and debounces all 16+ keys in real time, while the 8 KB SRAM holds current touch state. The -40 C to +85 C industrial temperature range supports kitchen and outdoor use cases. Designs typically route the CTMU channels through PPS to any GPIO pin, simplifying PCB layout when compared to fixed-function touch controllers.
추천
Low-Cost Graphical User Interfaces
The Parallel Master Port (PMP) with dual read/write buffers drives small TFT LCD panels and OLED displays from the PIC32MX120F064HT-I/PT without an external graphics controller. The PMP supports 8-bit and 16-bit parallel interfaces with up to 25 MHz throughput at 40 MHz CPU clock, suitable for QVGA (320x240) panels at 30 fps. Combined with the on-chip DMA controller, the CPU offloads frame-buffer refresh while running UI logic. This part is widely chosen for home appliance HMIs, vending machine displays, and entry-level industrial HMI panels. The 64 KB Flash fits lightweight graphics libraries such as SEGGER emWin and Microchip's MLA graphics library.
추천
Industrial Sensor Hubs
With four SPI, two I2C, and two UART interfaces, the PIC32MX120F064HT-I/PT can aggregate data from multiple industrial sensors - temperature, pressure, flow, gas - and forward it to a host controller over UART or LINbus. The hardware DSP extensions on the MIPS32 M4K core enable real-time filtering (FIR, IIR) of sensor data without CPU overhead. The brown-out detect, watchdog timer, and -40 C to +85 C operation provide the robustness required for industrial environments. Designs use this part as a sub-node in a larger control system rather than as a standalone PLC. The 10-bit ADC samples analog sensors at up to 1 Msps in 10-bit mode.
추천
Home Appliance Control Boards
The PIC32MX120F064HT-I/PT is a popular choice for white-goods control boards such as washing machines, dishwashers, and induction cooktops where cost, reliability, and industrial temperature range are priorities. The integrated peripherals (PWM, ADC, UART, I2C) drive motor-control MOSFETs, read temperature sensors, and communicate with the front-panel UI over LINbus. The 8 KB SRAM supports motor control loops at sufficient update rates, while the 64 KB Flash holds the appliance firmware, fault logs, and IoT-ready networking stack. The CTMU enables capacitive touch on the front panel without additional ICs.
추천
Portable Medical Devices
Battery-powered medical peripherals such as blood-pressure monitors, pulse oximeters, and portable diagnostic tools use the PIC32MX120F064HT-I/PT for its low-power Sleep and Idle modes combined with the MIPS32 M4K core's computational headroom for sensor signal conditioning. The 12-bit ADC reference and DMA controller enable accurate SpO2 photoplethysmography (PPG) measurements. The 2.3 V to 3.6 V supply range supports direct Li-ion battery operation without additional regulators. Designers choose this part for cost-sensitive Class II medical devices where IEC 60730 compliance is achieved through the integrated hardware safety features.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MX120F064HT-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MX120F064H-I/PT | PIC32MX120F064H-I/MR | PIC32MX120F064HT-I/MR | PIC32MX120F064HT-V/PT | PIC32MX230F064B-I/PT |
|---|---|---|---|---|---|---|
| Package | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K |
| Max CPU Speed | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 50 MHz (+25%) |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| USB | No | No | No | No | No | Yes (USB 2.0 FS OTG) |
| Temperature Grade | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +105 C (Extended) | -40 C to +85 C (Industrial) |
| Packing Format | Tape & Reel | Tray | Tray | Tape & Reel | Tape & Reel | Tray |
주요 차별점
- Tape and Reel packing format for high-volume SMT assembly (vs PIC32MX120F064H-I/PT)
- Industrial -40 C to +85 C temperature grade (vs PIC32MX120F064HT-V/PT)
- No USB peripheral, lower BOM cost than PIC32MX2xx (vs PIC32MX230F064B-I/PT)
설계 노트
PIC32MX120F064HT-I/PT requires a stable 3.3 V supply within 2.3 V to 3.6 V. Place 100 nF decoupling capacitors close to each VDD/VSS pin pair and a single bulk 10 uF tantalum or ceramic capacitor near the package. Use separate analog and digital ground planes joined at a single point under the MCU to minimize ADC reference noise. The internal voltage regulator requires an external inductor on the VDDcore pin when the part is supplied at 3.3 V; refer to family datasheet section 2.4 for the recommended inductor value (typically 10 uH). Power-on reset (POR) and brown-out reset (BOR) thresholds are configurable through the configuration bits.
The 64-pin TQFP (10 mm x 10 mm, 0.5 mm pitch) requires a 4-layer PCB with a continuous ground plane under the device for thermal dissipation and signal integrity. Route the 40 MHz CPU clock and any high-speed SPI signals over an unbroken reference plane; use 4-series termination on SPI clock lines exceeding 25 MHz. The Parallel Master Port (PMP) signals should be length-matched within 2 mm if the panel is far from the MCU. Keep the ICSP programming pins (PGECx/PGEDx) accessible on the production board to allow in-circuit programming and debugging with MPLAB ICD or Snap.
Do not assume all PIC32MX1xx parts support USB - the PIC32MX120 family specifically does not include USB peripheral hardware. The CTMU peripheral requires careful calibration of the current source trim bits for reliable touch sensing across temperature. When migrating from PIC32MX120 to PIC32MX230, verify that the additional USB interrupt vector is properly handled in the ISR. Configuration bits must be set before any code execution; an unconfigured MCU will execute from the default boot stub. For Sleep mode current below 30 uA, ensure all unused peripherals are disabled in their respective PMD register and all I/O pins are configured as outputs driven low.
규정 준수 정보
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified; for automotive-grade parts use PIC32MX series with -V temperature grade and explicit automotive certification, or PIC32MK family. Halogen-free MSL3 rating.
