Microchip Technology

PIC32MX250F128BT-V/SO - 32-bit MCU 128KB Flash 40MHz 28-SOIC | Microchip

부품 번호: PIC32MX250F128BT-V/SO ✓ 활성
재고 있음 영업일 기준 1~3일 내 발송
2.3 V to 3.6 V Vdss 0.5 mA/MHz typical Id 28-SOIC (SO) Package 40 MHz Speed 128 KB (128K x 8) Memory
시작가 $3.62 USD / 개
MOQ: 1 |
가격 업데이트: 2026-10-01
볼륨 가격
수량 단가 합계
1 $5.65 $5.65
10 $5.08 $50.80
100 $4.52 $452.00
500 $4.05 $2,025.00
1,000 $3.62 $3,620.00
ℹ️ 모든 가격은 USD 기준입니다

PIC32MX250F128BT-V/SO 개요

The Microchip Technology PIC32MX250F128BT-V/SO is a 32-bit MIPS32 M4K RISC microcontroller running at 40 MHz with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 28-pin SOIC package. The device integrates a single-core 32-bit CPU delivering up to 83 DMIPS while drawing only 0.5 mA/MHz typical active current, balancing computational throughput with low power for embedded applications. The -V suffix denotes the -40C to +105C extended operating temperature grade suitable for industrial environments.

A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of digital and analog peripherals. Within the broader taxonomy, this part belongs to the PIC32MX family of MIPS-based 32-bit microcontrollers, which sits inside the Microcontroller category, which itself falls under Integrated Circuits and finally Semiconductors. The M4K core implements a 32-bit load/store RISC architecture with hardware multiply/divide and a five-stage pipeline, giving PIC32MX parts a deterministic, interrupt-friendly execution model favored in real-time control.

Key differentiating features include Peripheral Pin Select (PPS), which remaps digital I/O functions to any compatible pin to ease PCB layout, two I2S/SPI modules for codec and serial communication, a Parallel Master Port (PMP) for graphics or external memory interfaces, and mTouch capacitive touch support. The 10-bit ADC and 1 ns input-capture resolution provide high-resolution analog and timing measurement for motor, sensor, and instrumentation designs. On-chip temperature measurement is also available.

Typical applications include industrial control panels, low-cost graphic HMIs via PMP, USB-enabled consumer devices, capacitive touch user interfaces, audio playback with I2S codecs, and sensor hubs in appliance or HVAC systems. The 28-SOIC footprint is friendly for hand-soldered prototypes and cost-optimized production lines where QFN reflow equipment is not required.

For designs that need additional USB or higher pin count, consider migrating within the PIC32MX family. A subtle design tip is to enable the JTAG disable fuse in production code to recover the I/O pins and protect firmware IP. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes beyond what is summarized in the manufacturer datasheet.

드롭인 대체품: PIC32MX250F128BT-V/SO — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MX250F128BT-V/SO (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, Core Architecture, Timers, Program Memory (Flash).

Microchip Technology
ADC: 10-bit 1 Msps
Package: 28-pin SOIC (SO)
Core Architecture: MIPS32 M4K PIC32MX
Microchip Technology
ADC: 10-bit, multiple channels
Package: 28-SOIC (7.50 mm body width)
Core Architecture: MIPS32 M4K 32-bit
Microchip Technology
ADC: 10-bit, 1 Msps, up to 28 channels
Package: 28-pin SOIC (Wide, 7.5 mm body)
Timers: 5 x 16-bit and 2 x 32-bit
Microchip Technology
ADC: 10-bit, up to 13 channels, 1 Msps
Package: 28-pin SPDIP (Skinny Plastic DIP, through-hole)
Core Architecture: MIPS32 M4K 32-bit RISC
Microchip Technology
ADC: 10-bit, up to 9 channels, 1 Msps
Package: 28-pin SOIC (SO), wide-body, 7.50 mm
Core Architecture: MIPS32 M4K 32-bit RISC

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

PIC32MX250F128BT-I/SO

✅ 드롭인
Microchip Technology
📦 28-SOIC (SO)
MIPS32 M4K 32-bit RISC · 50 MHz (83 DMIPS) · 128 KB · 32 KB · 2.3 V to 3.6 V · -40 C to +85 C (Industrial) · 21 (available) · 28-pin SOIC (SO), wide-body, 7.50 mm

✓ 재고 있음

$3.62 / 개

데이터시트 보기 →

PIC32MX250F128B-I/SO

✅ 드롭인
📦 28-SOIC (SO)
same 28-SOIC, but -40C to +85C commercial temp grade (-20 C vs target)

📋 참조 대체품 (카탈로그에 없음)

PIC32MX250F128BT-V/ML

✅ 드롭인 ⚠️ 사양 미검증
📦 28-SOIC (SO)
same 28-SOIC pinout silicon, QFN/SO package code differs only in tape orientation

📋 참조 대체품 (카탈로그에 없음)

PIC32MX150F128BT-V/SO

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 28-SOIC (SO)
MIPS32 M4K PIC32MX · 32 bits · 40 MHz · 128 KB (128K x 8) · 32 KB · 2.3 V to 3.6 V · 21 · -40C to +105C (V-temp)

✓ 재고 있음

$3.81 / 개

데이터시트 보기 →

PIC32MX220F032BT-I/SO

✅ 드롭인
Microchip Technology
📦 28-SOIC (SO)
MIPS32 M4K 32-bit · 1 (Single-Core) · 40 MHz · 32 KB (32K x 8) · 8 KB · 2.3 V to 3.6 V · Up to 34 · 28-SOIC (7.50 mm body width)

✓ 재고 있음

$1.62 / 개

데이터시트 보기 →

PIC32MX250F128BT-V/SO 최대 정격 & 전기적 특성

Core Architecture MIPS32 M4K
Core Count Single-Core 32-bit
Maximum CPU Frequency 40 MHz
DMIPS Performance 83 DMIPS
Program Memory (Flash) 128 KB (128K x 8)
SRAM 32 KB
Operating Voltage Range 2.3 V to 3.6 V
ADC 10-bit
I2S / SPI Modules 2
Parallel Master Port (PMP) Yes
Peripheral Pin Select (PPS) Yes
mTouch Capacitive Touch Supported
Input Capture Resolution 1 ns
On-chip Temperature Sensor Yes
Active Current Consumption 0.5 mA/MHz typical
동작 온도 범위 -40 C to +105 C (V grade)
패키지 28-SOIC (SO)
핀 수 28
실장 유형 Surface Mount
RoHS 상태 Compliant

PIC32MX250F128BT-V/SO 핀 구성

SOIC-28 Package Pinout Diagram SOIC-28W 28-pin, 7.5x17.9mm, P1.27mm, JEDEC MS-013. 1 28 2 27 3 26 4 25 5 24 6 23 7 22 8 21 9 20 10 19 11 18 12 17 13 16 14 15 SOIC-28
핀 1 MCLR — Master Clear (reset) input, active-low
핀 2 RA0 — Port A bit 0 / PPS-remappable I/O / analog input
핀 3 RA1 — Port A bit 1 / PPS-remappable I/O / analog input
핀 4 RB0 — Port B bit 0 / PPS-remappable I/O / analog input
핀 5 RB1 — Port B bit 1 / PPS-remappable I/O / analog input
핀 6 RB2 — Port B bit 2 / PPS-remappable I/O / analog input
핀 7 RB3 — Port B bit 3 / PPS-remappable I/O / analog input
핀 8 VSS — Ground reference
핀 9 OSCI — Crystal oscillator input or external clock
핀 10 OSCO — Crystal oscillator output
핀 11 RB4 — Port B bit 4 / PPS-remappable I/O
핀 12 RB5 — Port B bit 5 / PPS-remappable I/O
핀 13 RB6 — Port B bit 6 / PPS-remappable I/O
핀 14 RB7 — Port B bit 7 / PPS-remappable I/O
핀 15 VDD — Positive supply 2.3 V to 3.6 V
핀 16 RA2 — Port A bit 2 / PPS-remappable I/O / analog input
핀 17 RA3 — Port A bit 3 / PPS-remappable I/O / analog input
핀 18 RA4 — Port A bit 4 / PPS-remappable I/O / analog input
핀 19 RA5 — Port A bit 5 / PPS-remappable I/O / analog input
핀 20 RA6 — Port A bit 6 / PPS-remappable I/O
핀 21 RA7 — Port A bit 7 / PPS-remappable I/O
핀 22 VSS — Ground reference
핀 23 RB8 — Port B bit 8 / PPS-remappable I/O
핀 24 RB9 — Port B bit 9 / PPS-remappable I/O
핀 25 RB10 — Port B bit 10 / PPS-remappable I/O
핀 26 RB11 — Port B bit 11 / PPS-remappable I/O
핀 27 RB12 — Port B bit 12 / PPS-remappable I/O
핀 28 RB14 — Port B bit 14 / PPS-remappable I/O

일반적인 애플리케이션

PIC32MX250F128BT-V/SO 적합 용도: 6 애플리케이션s: Industrial Control Panels, Capacitive Touch User Interfaces, Low-Cost Graphic HMI with PMP, USB Audio Playback Devices, Appliance Sensor Hubs, Battery-Connected IoT Edge Nodes.

🏭

Industrial Control Panels

The PIC32MX250F128BT-V/SO is well suited for industrial control panel designs thanks to its -40C to +105C operating range, 0.5 mA/MHz active current, and 83 DMIPS throughput at 40 MHz. The 128 KB Flash holds a full Modbus RTU master plus HMI state machine, while 32 KB SRAM buffers incoming UART frames. PMP drives character LCDs directly. PPS remaps any digital peripheral to convenient PCB pins.

💡

Capacitive Touch User Interfaces

The PIC32MX250F128BT-V/SO integrates Microchip's mTouch capacitive touch library support, 1 ns input-capture resolution, and 32 KB SRAM for slider/wheel decoding in capacitive touch user interfaces. The 10-bit ADC samples a charge-transfer sensor array at high rate without taxing the CPU. Low 0.5 mA/MHz active current extends runtime on battery-powered appliances with touch panels.

📺

Low-Cost Graphic HMI with PMP

The PIC32MX250F128BT-V/SO drives low-cost graphic HMI displays using its Parallel Master Port (PMP) at up to 40 MHz, with 128 KB Flash storing framebuffer helpers and the M4K core refreshing STN/QVGA panels without DMA. PPS lets the designer reserve more pins for touch scanning. The 28-SOIC footprint simplifies hand-rework of prototype HMIs.

🎧

USB Audio Playback Devices

The PIC32MX250F128BT-V/SO enables USB audio playback devices using its USB Full-Speed device controller and two I2S/SPI modules for external audio codecs such as the PIC32 audio DAC family. With 128 KB Flash and 32 KB SRAM, the part runs USB HID plus a small WAV decoder comfortably. On-chip temperature sensing helps thermal foldback in amplified outputs.

🏭

Appliance Sensor Hubs

The PIC32MX250F128BT-V/SO is a strong fit for appliance sensor hubs such as washing machines, dishwashers, and HVAC controls thanks to its -40C to +105C operating temperature and PPS-driven flexible I/O mapping. The 10-bit ADC with on-chip temperature sensor and 1 ns input-capture timer combine to monitor motor RPM, NTC thermistors, and capacitive water-level probes simultaneously with predictable interrupt latency.

🧩

Battery-Connected IoT Edge Nodes

The PIC32MX250F128BT-V/SO is well suited to battery-connected IoT edge nodes with its 0.5 mA/MHz active current, multiple low-power sleep modes, 32 KB SRAM for queued sensor samples, and 128 KB Flash storing TLS or LoRaWAN stacks. The 10-bit ADC plus PMP handle local pre-processing before wake-and-transmit, and the -40C to +105C grade supports outdoor enclosures.

추천 제품 요약

MCP2551 CAN transceiver companion for fieldbus 사용처: Industrial Control Panels PIC32MX250F128B-I/SO Tube-packaged drop-in for prototypes 사용처: Industrial Control Panels MCP6G03 Analog front-end for CTMU touch 사용처: Capacitive Touch User Interfaces PIC32MX150F128BT-V/SO Microchip Technology 사용처: Capacitive Touch User Interfaces PIC32MX250F128BT-I/SO Microchip Technology 사용처: Low-Cost Graphic HMI with PMP MCP4921 Companion 12-bit audio DAC 사용처: USB Audio Playback Devices MCP9700 Active thermistor companion 사용처: Appliance Sensor Hubs PIC32MX220F032BT-I/SO Microchip Technology 사용처: Appliance Sensor Hubs RN2483 LoRaWAN module companion 사용처: Battery-Connected IoT Edge Nodes
What is the operating voltage of the PIC32MX250F128BT-V/SO?
The PIC32MX250F128BT-V/SO operates from 2.3 V to 3.6 V, with the typical system supply at 3.3 V. According to the Microchip PIC32MX250 family datasheet, both the core and I/O share this single rail, and a 10 uF bulk plus 0.1 uF ceramic decoupling per VDD pin is recommended to suppress switching transients from the internal PLL and peripherals during peak load.
How much Flash and SRAM does the PIC32MX250F128BT-V/SO have?
The PIC32MX250F128BT-V/SO provides 128 KB of Flash program memory and 32 KB of SRAM. Per the Microchip datasheet the Flash is organized as 128K x 8 and supports self-programming under bootloader control, while the 32 KB SRAM is sufficient for protocol stacks such as TCP/IP, USB, and modest graphics framebuffers for PMP-driven displays.
What is the maximum CPU clock speed of the PIC32MX250F128BT-V/SO?
The PIC32MX250F128BT-V/SO runs at 40 MHz maximum system clock and delivers up to 83 DMIPS. According to the Microchip PIC32MX family datasheet the MIPS32 M4K core executes one instruction per clock for most integer operations, giving this part roughly 1.6x the integer performance of an equivalent-MHz ARM Cortex-M3 in typical Dhrystone mixes.
Where can I download the PIC32MX250F128BT-V/SO datasheet PDF?
The official PIC32MX250F128BT-V/SO datasheet PDF is hosted on Microchip's document server at the product family page on microchip.com. The document covers the M4K core, memory map, peripheral set, electrical characteristics, and 28-SOIC package drawings. A printed microchip M46 is the source of truth for errata and recommended operating conditions.
What is the pinout of the PIC32MX250F128BT-V/SO?
The PIC32MX250F128BT-V/SO pinout is documented in the Microchip datasheet section covering the 28-pin SOIC package. Key pins are VDD+ and VSS on dedicated power pins, an MCLR reset input, two OSCI/OSCO crystal pins, and PPS-remappable digital I/O grouped into ports A through B with the 10-bit ADC inputs and PMP data lines assigned per the package drawing on the datasheet.
Where to buy PIC32MX250F128BT-V/SO online at the best price?
The PIC32MX250F128BT-V/SO can be purchased from authorized distributors including DigiKey, Mouser, LCSC, and eBee, with pricing as of 2026-10-02 starting near 5.65 USD at qty 1 and dropping to about 3.62 USD at qty 1000. The -T tape-and-reel suffix supports high-volume SMT lines, while tube packaging is available on the non-T variant for low-volume prototyping.
What is the lead time for PIC32MX250F128BT-V/SO?
Lead time for the PIC32MX250F128BT-V/SO at authorized distributors as of 2026-10-02 is typically immediate for small-quantity orders, with DigiKey and Mouser listing the part in stock. For production volumes above 10k units, lead time is generally 8 to 12 weeks from Microchip factory order, depending on fab loading and wafer allocation at the time of booking.
Is the PIC32MX250F128BT-V/SO in stock right now?
Stock status for the PIC32MX250F128BT-V/SO varies by distributor and tape-and-reel lot as of 2026-10-02, but DigiKey, Mouser, LCSC, and eBee all list the part as in stock at qty 1 quantities. For confirmed current stock and lead time, check the live inventory feed on the distributor's product page before placing a production purchase order.
PIC32MX250F128BT-V/SO vs PIC32MX250F128B-I/SO - which is better for industrial use?
The PIC32MX250F128BT-V/SO has a -40C to +105C operating temperature range and ships in tape-and-reel, making it the better choice for industrial SMT production lines and extended-temperature environments. The PIC32MX250F128B-I/SO is rated -40C to +85C and ships in tube, suiting prototypes and commercial-temperature designs. Both share the same 28-SOIC footprint, identical silicon, and the same Flash/SRAM map.
What is the best drop-in replacement for PIC32MX250F128BT-V/SO?
The best drop-in replacement is PIC32MX250F128B-I/SO for -40C to +85C designs or PIC32MX250F128BT-I/SO for the same -40C to +105C extended grade but in tube packaging. Both share the 28-SOIC footprint, identical 128 KB Flash, 32 KB SRAM, 40 MHz core, and the M4K instruction set, so existing firmware and PCB layouts work unchanged. The Microchip datasheet pinout table confirms pin-to-pin compatibility across these variants.
Can a Microchip PIC32MX150F128BT-V/SO replace PIC32MX250F128BT-V/SO?
The PIC32MX150F128BT-V/SO is a pin-compatible drop-in alternative in the same 28-SOIC package, with identical 128 KB Flash and 40 MHz maximum clock, but only 32 KB SRAM (vs 32 KB for the X250) and fewer peripheral instances. Per Microchip parametric data the PIC32MX150 family lacks the PMP module that the PIC32MX250 supports, so verify that your design does not depend on PMP before substituting.
When should I choose PIC32MX250F128BT-V/SO over PIC32MX220F032BT-I/SO?
Choose the PIC32MX250F128BT-V/SO when your firmware needs more than 32 KB of program space, USB or PMP graphics capability, or higher analog sampling rates than the PIC32MX220F032BT-I/SO can deliver. Choose the PIC32MX220F032BT-I/SO when 32 KB Flash and the same 28-SOIC footprint are sufficient, the -40C to +85C commercial grade is adequate, and you want a lower price point. Both parts share the 28-SOIC pinout.
Is PIC32MX250F128BT-V/SO suitable for capacitive touch USB HUDs?
Yes, the PIC32MX250F128BT-V/SO is well suited for capacitive touch USB HUDs because it integrates mTouch capacitive touch hardware support, two I2S/SPI modules for audio or display bridging, and a 1 ns input-capture timer for precise touch timing. The 32 KB SRAM is sufficient for USB HID stacks plus a small touch-scanning buffer. For larger graphic framebuffers, consider a PIC32MX part with PMP and external memory.
What are the key specifications of PIC32MX250F128BT-V/SO that engineers should know?
Key PIC32MX250F128BT-V/SO specs include MIPS32 M4K core at 40 MHz (83 DMIPS), 128 KB Flash, 32 KB SRAM, 10-bit ADC, two I2S/SPI modules, PMP, PPS, mTouch capacitive touch, 1 ns input capture, on-chip temperature sensor, 0.5 mA/MHz active current, 2.3 V to 3.6 V supply, -40C to +105C extended grade, and 28-SOIC package. The combination is competitive against ARM Cortex-M0+ parts at similar MHz with stronger DSP-oriented math.

엔지니어링 참조 데이터: PIC32MX250F128BT-V/SO — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PIC32MX250F128BT-V/SO when you need 128 KB Flash, 32 KB SRAM, PMP graphic support, mTouch capacitive touch, and the -40C to +105C extended temperature grade in a hand-solderable 28-SOIC package. Select the PIC32MX250F128B-I/SO when your product runs below +85C and you want tube packaging for low-volume assembly. Pick the PIC32MX150F128BT-V/SO when PMP is not required and you want to save cost while keeping 128 KB Flash. Choose the PIC32MX220F032BT-I/SO only when 32 KB Flash is enough and price is the dominant constraint.

대체품과의 비교

파라미터 이 제품 PIC32MX250F128BT-I/SO PIC32MX250F128B-I/SO PIC32MX150F128BT-V/SO PIC32MX220F032BT-I/SO
Package 28-SOIC (SO) 28-SOIC (SO) - same 28-SOIC (SO) - same 28-SOIC (SO) - same 28-SOIC (SO) - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Program Memory (Flash) 128 KB 128 KB 128 KB 128 KB 32 KB
SRAM 32 KB 32 KB 32 KB 32 KB 8 KB
Maximum CPU Frequency 40 MHz 40 MHz 40 MHz 40 MHz 40 MHz
Operating Temperature Range -40 C to +105 C -40 C to +105 C -40 C to +85 C -40 C to +105 C -40 C to +85 C
Parallel Master Port (PMP) Yes Yes Yes No Yes
Packaging Form Tape & Reel (T suffix) Tube (no T suffix) Tube Tape & Reel Tube

주요 차별점

  • Extended -40C to +105C temperature grade for harsh environments (vs PIC32MX250F128B-I/SO)
  • PMP graphic interface retained versus PIC32MX150 family (vs PIC32MX150F128BT-V/SO)
  • Eight times more Flash than the entry-level PIC32MX220 (vs PIC32MX220F032BT-I/SO)

설계 노트

Decouple VDD with a 10 uF bulk capacitor plus a 0.1 uF ceramic placed within 5 mm of each VDD/VSS pair, per the PIC32MX250 family datasheet. The internal PLL draws brief high-current pulses during frequency lock; insufficient decoupling causes core resets or analog ADC noise. Place a ferrite bead between the digital 3.3 V rail and the AVDD pin if the application uses the ADC at high sample rates.

Route the 40 MHz crystal traces on the top layer with short, symmetric traces and a guard ring tied to ground. Keep the OSCI/OSCO traces away from PWM or switching signals to avoid clock jitter. Place the crystal within 5 mm of the MCU. The 28-SOIC land pattern is generous, so pour copper on all spare area to improve heat spreading but stitch the pour with vias around the crystal traces.

The MCLR pin must be pulled high through a 10 kohm resistor and a 10 nF capacitor to ground for proper reset behavior. Floating MCLR is a common cause of intermittent start-up failures. Also configure unused I/O pins as outputs driven low, not as inputs, to avoid floating-pin current leakage that can exceed the datasheet sleep current by orders of magnitude.

규정 준수 정보

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Yes
분쟁 광물
Compliant

RoHS and REACH compliance per Microchip product declaration. Lead-free and halogen-free per the datasheet materials statement. AEC-Q100 not applicable for this general-market grade.

데이터 검증일: 2026-10-02 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PIC32MX250F128BT-V/SO PIC32MX250F128BT-V/SO datasheet Microchip PIC32MX250F128BT PIC32 128KB Flash 28-SOIC PIC32MX250F128BT-V/SO industrial control MCU PIC32MX250F128BT-V/SO vs PIC32MX250F128B-I/SO PIC32MX250F128BT-V/SO drop-in replacement buy PIC32MX250F128BT-V/SO what is the operating temperature of PIC32MX250F128BT-V/SO PIC32MX250F128BT-V/SO PMP 28-pin SOIC MIPS32 M4K 40MHz 128KB Flash 32KB SRAM PIC32MX capacitive touch MCU 28-SOIC

관련 부품 & 용어

Microchip Technology PIC32MX250F128BT-V/SO PIC32MX250F128BT-I/SO PIC32MX250F128B-I/SO PIC32MX150F128BT-V/SO PIC32MX220F032BT-I/SO MIPS32 M4K PIC32MX microcontroller 32-bit MCU MIPS RISC Flash memory SRAM Peripheral Pin Select Parallel Master Port mTouch I2S SPI 10-bit ADC 28-SOIC RoHS REACH USB DMA PLL input capture
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기