PIC32MX360F512L-80V/ - 80MHz 512KB Flash 32-bit MCU | Microchip
부품 번호: PIC32MX360F512L-80V/ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.11 | $7.11 |
| 10 | $6.4 | $64.00 |
| 100 | $5.45 | $545.00 |
| 500 | $4.9 | $2,450.00 |
| 1,000 | $4.35 | $4,350.00 |
PIC32MX360F512L-80V/ 개요
A 32-bit microcontroller (MCU) is an integrated processor core that combines a CPU, memory (Flash, SRAM), peripherals, and I/O on a single die. The PIC32MX3XX/4XX family sits in the broader taxonomy: microcontroller -> embedded processor -> semiconductor. Compared with 8-bit/16-bit MCUs, 32-bit parts handle larger code bases, USB stacks, and graphical user interfaces while preserving real-time deterministic interrupt response. PIC32 devices run instruction-aligned code, support C/C++ with MPLAB XC32, and pair with Microchip's MPLAB X IDE and PICkit 5 in-circuit debugger.
Key differentiating features of the PIC32MX360F512L-80V/ include 4 channels of hardware DMA, a 10-bit ADC with up to 16 channels and 1 Msps conversion, USB 2.0 full-speed On-The-Go (OTG), and dual I2C/SPI/UART interfaces. The device also exposes 5 16-bit timers/counters, a parallel master port (PMP/PSP), and JTAG-compatible ICSP debug. Pin count is 100 in TQFP and 121 in TFBGA; both pin counts are higher than smaller PIC32MX siblings (64-pin TQFP), enabling more GPIO and richer peripheral mapping.
The architecture combines a 5-stage pipelined MIPS32 M4K core with hardware multiply/divide and shadow register sets for zero-overhead interrupt context save/restore. Up to 32KB of RAM supports Ethernet, USB, and CAN software stacks, while 512KB Flash accommodates full TCP/IP, USB CDC/MSD/Host, and graphical libraries. DMA offloads memory-to-peripheral transfers, freeing the core for application code.
Typical applications include USB peripherals (HID, CDC, MSD), industrial control HMIs with TFT displays, embedded dataloggers, sensor aggregators, and low-cost Ethernet-connected devices via external MAC/PHY. The wide memory and peripheral set also suits CAN gateway prototypes and motor control subsystems paired with the PIC32 DSP library.
When selecting this part, consider the 100-pin TQFP (-80V/PT suffix) for hand-solderable prototyping or the 121-pin TFBGA (-80V/BG suffix) for space-constrained designs. Industrial temperature grade (-80V/I variants) is essential for -40C to +85C environments. Decoupling must follow Microchip's 100 nF + bulk capacitor guidance, and ICSP traces should be kept short for reliable in-circuit programming.
This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.
드롭인 대체품: PIC32MX360F512L-80V/ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MX360F512L-80V/ (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Core Architecture, DMA Channels, Operating Temperature Range.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MX360F512LT-80V/PT
✅ 드롭인✓ 재고 있음
$5.1 / 개
데이터시트 보기 →PIC32MX340F512H-80V/PT
✅ 드롭인✓ 재고 있음
$4.78 / 개
데이터시트 보기 →PIC32MX320F128L-80V/PT
✅ 드롭인✓ 재고 있음
$4.45 / 개
데이터시트 보기 →PIC32MX360F512L-80V/BG
✅ 드롭인✓ 재고 있음
$6.65 / 개
데이터시트 보기 →PIC32MX270F512L-V/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$6.48 / 개
데이터시트 보기 →PIC32MX360F512L-80V/ 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M4K, 32-bit |
| Core Features | 5-stage pipeline, Harvard, MIPS16e, hardware multiply/divide |
| Maximum CPU Frequency | 80 MHz (105 DMIPS) |
| Program Memory (Flash) | 512 KB (512K x 8) |
| Data Memory (SRAM) | 32 KB |
| DMA Channels | 4 |
| ADC | 10-bit, up to 16 channels, 1 Msps |
| USB | USB 2.0 Full-Speed OTG |
| Timers | 5 x 16-bit |
| Communication Peripherals | 2x I2C, 2x SPI, 2x UART |
| Parallel Master Port (PMP) | Yes |
| Operating Voltage | 2.5V / 3.3V |
| 동작 온도 범위 | -40C to +85C (industrial) |
| 패키지 | 100-pin TQFP (12x12 mm) |
| Package (Alternate) | 121-pin TFBGA (10x10 mm) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
PIC32MX360F512L-80V/ 121-pin tfbga (10x10 mm) 핀 구성 가이드
PIC32MX360F512L-80V/(121-pin tfbga (10x10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC32MX360F512L-80V/.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC32MX360F512L-80V/ 적합 용도: 7 애플리케이션s: USB Human Interface Devices (HID), Industrial Human-Machine Interface (HMI), USB Data Logging / Sensor Aggregation, Audio USB Peripherals (USB Audio / MIDI), Embedded Control / Motor Drive Gateways, Educational / Maker Development Boards, Point-of-Sale (POS) Terminal Peripherals.
USB Human Interface Devices (HID)
The PIC32MX360F512L-80V/'s integrated USB 2.0 Full-Speed OTG controller with on-chip PHY and 4-channel DMA makes it well-suited for USB HID peripherals such as keyboards, mice, custom input controllers, and game pads. The 80MHz MIPS M4K core sustains 105 DMIPS - enough headroom for HID class parsing, debounce, and LED animation alongside USB polling at 1ms intervals. With 32KB SRAM the part comfortably buffers HID reports and descriptor tables; 512KB Flash accommodates HID stacks plus application code. The 100-pin TQFP exposes up to 78 GPIO, more than enough for key matrices, capacitive touch sense lines, and RGB lighting.
추천
Industrial Human-Machine Interface (HMI)
For industrial HMI panels with TFT LCDs, the PIC32MX360F512L-80V/ exposes a parallel master port (PMP) capable of driving 8-bit 8080/6800 displays and a 10-bit ADC for front-panel potentiometers and thermistor inputs. The 5-stage pipelined 32-bit core pumps pixels into the PMP without DMA bottleneck, while 4 DMA channels offload screen-buffer refresh and ADC sequencing. 32KB SRAM holds a small framebuffer for menus; 512KB Flash holds graphics assets, fonts, and the user-application logic. Industrial temperature grade (-40C to +85C) and 2.5V/3.3V operation suit 24V industrial backplane rails regulated down to 3.3V.
추천
USB Data Logging / Sensor Aggregation
Data loggers and sensor aggregators benefit from the PIC32MX360F512L-80V/'s combination of USB, 4 DMA channels, and 10-bit ADC with 1 Msps conversion. The DMA-driven ADC can sample up to 16 analog channels while the CPU compresses and packetizes records for USB MSD export. 512KB Flash stores approximately 4MB of compressed logs via SD-card via SPI; 32KB SRAM handles ring buffers and the USB stack. The 100-pin TQFP provides ample GPIO for SPI sensors, I2C peripherals, and SD-card interface. Industrial temperature grade enables outdoor sensor hubs and remote telemetry units.
추천
Audio USB Peripherals (USB Audio / MIDI)
USB audio peripherals such as USB microphones, USB MIDI controllers, and USB speakers fit naturally on the PIC32MX360F512L-80V/. Its USB 2.0 Full-Speed supports 12Mbps isochronous endpoints, the standard pipe for USB audio at 16-bit/48kHz stereo. The 80MHz core sustains I2S or PWM audio output alongside USB streaming with measurable CPU headroom; 32KB RAM holds small PCM buffers and USB descriptors; 512KB Flash holds the Microchip USB Audio class stack. I2S or PWM peripherals are available via remappable PPS pins. This part powers USB MIDI surface controllers, USB mixers, and learning-lab audio devices.
추천
Embedded Control / Motor Drive Gateways
Although the PIC32MX360F512L-80V/ lacks dedicated CAN or Ethernet, it serves well as a USB-to-multi-UART gateway that bridges a host PC to a daisy-chained set of motor controllers, sensor arrays, or distributed I/O. The 2x UART, 2x SPI, and 2x I2C peripherals allow multi-protocol bridging; the DMA engine moves sensor data to USB without loading the core. 512KB Flash hosts the USB CDC bridge firmware plus protocol converters; 32KB RAM holds transient protocol frames. Industrial temperature grade supports factory-floor ambient temperatures. This configuration is common in CNC retrofits and lab-automation backplanes.
추천
Educational / Maker Development Boards
The PIC32MX360F512L-80V/ has been a staple on Microchip's MA320001 plug-in modules for the Explorer 16 development board, indicating its suitability as an educational platform. 80MHz/105 DMIPS gives engineering students headroom for real-time operating systems (FreeRTOS port) and 32-bit concepts. 512KB Flash accommodates full libraries including USB, graphics, and DSP primitives. 100-pin TQFP is easy to breadboard via breakout boards; ICSP debug via PGECx/PGEDx works with PICkit 3/4/5. The Microchip ecosystem (MPLAB X IDE, MPLAB Harmony v3) provides a low-friction learning path.
추천
Point-of-Sale (POS) Terminal Peripherals
POS peripherals such as USB barcode scanners, customer-facing displays, magnetic-stripe readers, and receipt printers integrate cleanly on the PIC32MX360F512L-80V/. USB OTG enables device or host roles for connecting to upstream terminals; PMP drives character or graphical customer displays; 10-bit ADC reads battery voltage and analog sensors. 512KB Flash stores multi-language font tables and USB class stacks (HID keyboard for barcode-emulation mode). The 100-pin TQFP is widely available from distributors and supports -40C to +85C operation for retail and light-industrial POS environments. Industrial-grade longevity suits 7-10 year product lifetimes.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MX360F512L-80V/ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MX360F512LT-80V/PT | PIC32MX340F512H-80V/PT | PIC32MX320F128L-80V/PT | PIC32MX270F512L-V/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same |
| Core | MIPS32 M4K @ 80MHz | MIPS32 M4K @ 80MHz | MIPS32 M4K @ 80MHz | MIPS32 M4K @ 80MHz | MIPS32 M4K @ 64MHz (lower) |
| Flash | 512 KB | 512 KB | 512 KB | 128 KB (smaller) | 512 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 64 KB (larger) |
| USB | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB Full-Speed (no OTG) | USB Full-Speed | USB 2.0 Full-Speed OTG |
| ADC | 10-bit, 16 ch, 1 Msps | 10-bit, 16 ch, 1 Msps | 8-bit, 16 ch (lower res) | 10-bit, 13 ch | 10-bit, 28 ch (more ch) |
| DMA Channels | 4 | 4 | 4 | 4 | 4 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +105C |
주요 차별점
- USB 2.0 Full-Speed OTG with on-chip PHY (vs PIC32MX340F512H-80V/PT)
- 10-bit ADC with 1 Msps sampling (vs PIC32MX340F512H-80V/PT)
- Higher Flash density (512 KB) over lower-tier siblings (vs PIC32MX320F128L-80V/PT)
- Mature USB ecosystem (vs PIC32MX270F512L-V/PT)
설계 노트
Decouple VDD/VSS pairs with 100nF X7R ceramics placed within 3mm of each supply pin. Add a single 4.7uF bulk tantalum or ceramic near the package for USB inrush events. Estimated: at 80MHz full-load with USB active, the core draws approximately 60-80mA; VDDIO and VDDCORE should track each other to avoid latch-up. Avoid switching the regulator during USB enumeration or the host may drop the device.
Keep ICSP traces (PGECx, PGEDx) shorter than 50mm and route away from high-current or high-frequency nets (USB DP/DM, PMP data). Place a 4.7k-10k pull-up on MCLR to VDD and ensure no high-impedance floating inputs. USB DP/DM traces should be 45-ohm differential with a common-mode choke and ESD protection (USBLC6-2SC6 or equivalent). The crystal traces should be short and guarded by a ground ring.
Estimated: a common pitfall is leaving the JTAG-enabled fuse set when production units ship, exposing debug pins and increasing code-read risk. Set the JTAG-disabled fuse (CFG bits) before final programming. Another pitfall is omitting the 1k series resistor on USB DP/DM, which causes compliance failures. Finally, do not exceed the 3.6V absolute-max on any I/O when interfacing 5V logic - use a level translator or series resistor.
규정 준수 정보
RoHS compliant per Microchip product page. Lead-free / halogen-free per TQFP packaging. Not AEC-Q100 qualified (not automotive).
