PIC32MX564F064H-V/PT - 80MHz 32-bit MCU 64KB Flash USB OTG TQFP-64
부품 번호: PIC32MX564F064H-V/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $5.85 | $5.85 |
| 10 | $5.4 | $54.00 |
| 100 | $4.8 | $480.00 |
| 500 | $4.32 | $2,160.00 |
| 1,000 | $3.95 | $3,950.00 |
PIC32MX564F064H-V/PT 개요
A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, program Flash, data SRAM, peripherals and interrupt logic on a single silicon die, enabling deterministic real-time control and connectivity in compact form factors. PIC32MX5xx/6xx/7xx devices sit at the upper end of Microchip's PIC32MX family, bridging the gap between 8/16-bit PIC and Cortex-M parts by combining a MIPS32 core with USB, CAN and graphical peripherals for consumer, industrial and medical embedded designs.
Key features include 64 KB single-cycle Flash with live update support, 32 KB SRAM, 80 MHz core / 40 MHz peripheral bus, USB 2.0 full-speed OTG with on-chip transceiver, 10-bit 1 MSPS ADC with 16 analog inputs, two I2C, two SPI, two UART, a parallel master port (PMP), five 16-bit timers, a real-time clock and calendar, JTAG and 2-wire ICSP debug interfaces. Internal phase-locked loop multiplies the external oscillator up to 80 MHz for high throughput while supporting low-power clock domains.
The MIPS M4K core executes most instructions in a single cycle and includes a hardware multiplier, single-precision FPU-less DSP extensions and a 16-bit instruction set mode for code density. The unified 4 GB linear address space simplifies memory mapping, and 4-channel DMA offloads peripheral and memory-to-memory transfers, freeing the CPU for control-plane tasks. Brown-out reset, watchdog timer and configurable interrupt controller support IEC 60730-class safety routines.
Typical applications include USB peripherals and HID devices, industrial control and HMI, sensor and instrumentation data loggers, low-cost graphics terminals using PMP-driven LCDs, medical point-of-care devices, and CAN/USB gateway nodes. The PIC32MX564F064H-V/PT is qualified for industrial temperature ranges, making it well suited to factory automation, building control and outdoor telemetry.
When designing with this part, ensure the 3.3 V supply is well decoupled with 100 nF and 10 uF bulk capacitors placed within 5 mm of each VDD/VSS pair. Configure the PLL loop filter components per datasheet recommendations and reserve the RTCC pins if a 32.768 kHz crystal is used for the real-time clock. Always program the Configuration Words and oscillator startup delays before exiting the reset vector to avoid USB enumeration failures.
드롭인 대체품: PIC32MX564F064H-V/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MX564F064H-V/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, DMA Channels, Operating Temperature, Timers.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MX564F064H-I/PT
✅ 드롭인✓ 재고 있음
$3.85 / 개
데이터시트 보기 →PIC32MX564F064HT-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX564F064H-V/MR
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.1 / 개
데이터시트 보기 →PIC32MX534F064H-V/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.92 / 개
데이터시트 보기 →PIC32MX550F256H-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.48 / 개
데이터시트 보기 →PIC32MX564F064H-V/PF
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX564F064H-V/PT 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M4K |
| Core Size | 32-Bit |
| Maximum Core Frequency | 80 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| RAM Size | 32 KB |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| 동작 온도 범위 | -40C to +105C (-V grade) |
| 패키지 | 64-TQFP (10x10 mm) |
| 실장 유형 | Surface Mount |
| USB | USB 2.0 Full-Speed OTG with on-chip transceiver |
| ADC | 10-bit, up to 16 channels, 1 MSPS |
| DMA Channels | 4 |
| Timers | 5 x 16-bit + 2 x 32-bit |
| Communication Interfaces | 2x UART, 2x SPI, 2x I2C |
| Parallel Master Port (PMP) | Yes |
| Debug Interface | JTAG / 2-wire ICSP |
| I/O Pins | 53 (approx) |
| RoHS 상태 | ROHS3 Compliant |
| Programming Tool | MPLAB X IDE, PICkit 5 |
PIC32MX564F064H-V/PT 핀 구성
| 핀 1 | RG15 — General purpose I/O / PMP data |
| 핀 2 | RG12 — General purpose I/O / PMP data |
| 핀 3 | RG13 — General purpose I/O / PMP data |
| 핀 4 | RG14 — General purpose I/O / PMP data |
| 핀 5 | VDD — Positive supply (2.3V - 3.6V) |
| 핀 6 | RF5 — General purpose I/O |
| 핀 7 | RF4 — General purpose I/O |
| 핀 8 | VDD — Positive supply |
| 핀 9 | RB5 — General purpose I/O / PGED2 |
| 핀 10 | RB4 — General purpose I/O / PGEC2 |
| 핀 11 | RB3 — General purpose I/O / AN3 |
| 핀 12 | RB2 — General purpose I/O / AN2 |
| 핀 13 | RB1 — General purpose I/O / AN1 |
| 핀 14 | RB0 — General purpose I/O / AN0 |
| 핀 15 | RB6 — General purpose I/O / PGEC1 |
| 핀 16 | RB7 — General purpose I/O / PGED1 |
| 핀 17 | RA9 — General purpose I/O |
| 핀 18 | RA10 — General purpose I/O |
| 핀 19 | RA1 — General purpose I/O / AVDD-related |
| 핀 20 | VSS — Ground |
| 핀 21 | RA0 — General purpose I/O |
| 핀 22 | RA2 — General purpose I/O / SDA2 |
| 핀 23 | RA3 — General purpose I/O / SCL2 |
| 핀 24 | RA4 — General purpose I/O |
| 핀 25 | AVDD — Analog positive supply |
| 핀 26 | AVSS — Analog ground |
| 핀 27 | RA5 — General purpose I/O / AN5 |
| 핀 28 | RA6 — General purpose I/O |
| 핀 29 | RA7 — General purpose I/O |
| 핀 30 | VSS — Ground |
| 핀 31 | RD0 — General purpose I/O |
| 핀 32 | RD1 — General purpose I/O |
| 핀 33 | RD2 — General purpose I/O |
| 핀 34 | RD3 — General purpose I/O |
| 핀 35 | RD4 — General purpose I/O |
| 핀 36 | RD5 — General purpose I/O |
| 핀 37 | RD6 — General purpose I/O |
| 핀 38 | RD7 — General purpose I/O |
| 핀 39 | VDD — Positive supply |
| 핀 40 | RC1 — General purpose I/O |
| 핀 41 | RC2 — General purpose I/O |
| 핀 42 | RC3 — General purpose I/O |
| 핀 43 | RC4 — General purpose I/O / SDA1 |
| 핀 44 | VSS — Ground |
| 핀 45 | RC5 — General purpose I/O / SCL1 |
| 핀 46 | RC6 — General purpose I/O |
| 핀 47 | RC7 — General purpose I/O |
| 핀 48 | RC8 — General purpose I/O |
| 핀 49 | RC9 — General purpose I/O |
| 핀 50 | VUSB — USB internal regulator output (3.3V) |
| 핀 51 | VBUS — USB VBUS detect input |
| 핀 52 | D- — USB D- data line |
| 핀 53 | D+ — USB D+ data line |
| 핀 54 | VSS — Ground |
| 핀 55 | RF6 — General purpose I/O |
| 핀 56 | RF7 — General purpose I/O |
| 핀 57 | RF8 — General purpose I/O |
| 핀 58 | RF2 — General purpose I/O |
| 핀 59 | RF3 — General purpose I/O |
| 핀 60 | RG0 — General purpose I/O / DEVCFG0 |
| 핀 61 | RG1 — General purpose I/O / DEVCFG1 |
| 핀 62 | RG6 — General purpose I/O / SCLK1 |
| 핀 63 | RG7 — General purpose I/O / SDO1 |
| 핀 64 | RG8 — General purpose I/O / SDI1 |
일반적인 애플리케이션
PIC32MX564F064H-V/PT 적합 용도: 6 애플리케이션s: USB HID and Peripheral Devices, Industrial Control and HMI, Sensor Data Loggers and Instrumentation, Medical Point-of-Care Devices, Building Automation and HVAC, Low-Cost Graphics Terminals.
USB HID and Peripheral Devices
The PIC32MX564F064H-V/PT is a strong fit for USB peripherals because it integrates a USB 2.0 full-speed OTG controller with on-chip transceiver, eliminating the need for an external PHY. At 80 MHz the MIPS M4K core sustains HID, CDC and custom-class enumeration within USB-compliant timing budgets. The 64 KB Flash is sufficient for stacks like Microchip's MLA USB, while 32 KB SRAM accommodates dual-class composite USB devices. Pair it with a 12 MHz crystal or internal 8 MHz RC with PLL for full-speed signaling, and use the 10-bit ADC for analog control inputs such as button-press force sensing or potentiometer inputs.
추천
Industrial Control and HMI
With a V-grade temperature range up to +105C and PMA/PMP peripherals, the PIC32MX564F064H-V/PT suits industrial HMIs driving character or graphical LCDs. The parallel master port can stream pixel data to TFT displays at frame rates exceeding 30 fps for small QVGA panels, while the DMA controller offloads pixel transfers from the CPU. The 10-bit 1 MSPS ADC handles sensor inputs such as temperature, pressure and 4-20 mA loops with proper signal conditioning. Industrial designers benefit from Microchip's IEC 60730-class safety library and watchdog timer support, and the part's MTBF of millions of hours underwrites long-life machinery deployments.
추천
Sensor Data Loggers and Instrumentation
The PIC32MX564F064H-V/PT's 1 MSPS ADC, 4-channel DMA and 32 KB SRAM make it a capable platform for multi-channel sensor logging at sample rates up to several hundred kHz. The 64 KB Flash stores application code and small lookup tables, while an external SPI flash or SD card over SPI/USB expands storage. The integrated RTCC with backup battery domain allows accurate timestamping without external RTC chips. Industrial-grade variants operate from -40C to +105C, suitable for outdoor or factory-floor data acquisition. The free Microchip Harmony and MLA libraries include SD card, USB MSD and FAT file-system drivers for rapid logger prototyping.
추천
Medical Point-of-Care Devices
The PIC32MX564F064H-V/PT powers medical point-of-care analyzers requiring USB connectivity to host systems, a real-time clock for sample timestamps, and 10-bit ADC resolution adequate for photometric sensors. The 80 MHz MIPS core runs small RTOS instances such as FreeRTOS port for command processing and sensor fusion. The IEC 60730-compliant safety library and configurable brown-out reset improve patient-safety robustness. Microchip's FDA-recognized development tools and long-term part availability make this MCU a stable platform for regulated medical designs.
추천
Building Automation and HVAC
Building automation systems use the PIC32MX564F064H-V/PT for HVAC controllers, smart thermostats and lighting control nodes. USB OTG enables easy field firmware update via a USB stick, while the PMP drives character LCDs for indoor unit display. The 10-bit ADC supports temperature, humidity and light sensors, and the UART/SPI/I2C set communicates with wireless modules like LoRa or Sub-GHz transceivers for backbone connectivity. Operating from a single 3.3 V rail, the part simplifies power-tree design in 24 VAC wall-wart-derived systems. Industrial -V grade supports attic and rooftop installations.
추천
Low-Cost Graphics Terminals
The PIC32MX564F064H-V/PT's parallel master port streams pixel data to QVGA/WQVGA TFT displays, while DMA channels handle background refresh without CPU load. At 80 MHz the MIPS M4K core runs Microchip's graphics library plus a small RTOS for touch input and menu rendering. The 64 KB Flash accommodates several menu screens and Unicode fonts, and the integrated USB OTG allows host connection for firmware update or remote terminal emulation. Designers can add external SPI flash for bitmap assets. The TQFP-64 package is easy to hand-solder and rework during prototyping.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MX564F064H-V/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MX564F064H-I/PT | PIC32MX564F064HT-I/PT | PIC32MX564F064H-V/MR | PIC32MX534F064H-V/PT | PIC32MX550F256H-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) - same | 64-TQFP (10x10) - same | 64-QFN (10x10) - same pinout | 64-TQFP (10x10) - same | 64-TQFP (10x10) - same |
| Core Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 256 KB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 64 KB |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG |
| Temperature Range | -40C to +105C (V-grade) | -40C to +85C (I-grade) | -40C to +85C (I-grade) | -40C to +105C (V-grade) | -40C to +105C (V-grade) | -40C to +85C (I-grade) |
| ADC | 10-bit, 1 MSPS | 10-bit, 1 MSPS | 10-bit, 1 MSPS | 10-bit, 1 MSPS | 10-bit, 500 ksps | 10-bit, 1.1 MSPS |
주요 차별점
- USB OTG with on-chip transceiver (vs PIC32MX320F064H-40I/PT)
- Higher ADC sample rate (vs PIC32MX534F064H-V/PT)
- Extended temperature range (V-grade) (vs PIC32MX564F064H-I/PT)
- Lower memory footprint vs upgrade path (vs PIC32MX550F256H-I/PT)
설계 노트
Decouple the PIC32MX564F064H-V/PT with a 100 nF ceramic capacitor placed within 5 mm of every VDD/VSS pair, plus a 10 uF bulk capacitor near the main supply pin. The analog AVDD/AVSS pair also requires a dedicated 100 nF + 10 uF RC network to reduce ADC noise. The on-chip USB voltage regulator at the VUSB pin needs a 1 uF to 4.7 uF decoupling capacitor per datasheet. Do not exceed 3.6 V on any supply pin or latch-up may occur.
Route the 12 MHz crystal traces within 5 mm of the OSCI/OSCO pins with a ground guard ring, and keep the load capacitors close to the crystal. The USB D+/D- lines should be 90 ohm differential with matched length and a continuous ground reference. Place the parallel master port data bus traces as byte-aligned groups, and provide a ground plane under the TQFP-64 package. Keep ADC analog traces away from switching signals and add an RC anti-alias filter on each analog input.
Always program the Configuration Words (DEVCFG0/1/2/3) including the oscillator selection, PLL multiplier, watchdog enable and JTAG/trace configuration before exiting the reset vector; otherwise the device may fail to boot or behave unpredictably. Enable the USB internal regulator and connect the correct pull-up/pull-down on the D+ line per device or host mode. Do not skip the PLL lock-wait delay before switching to PLL clock - the system can hang if the clock source is changed too early. Verify RTCC backup battery polarity if used.
규정 준수 정보
ROHS3 Compliant per Microchip product page. Industrial -V temperature grade, not AEC-Q100 qualified (automotive parts would use PIC32MX variant with /VAO suffix).
