S9S08DZ48F2MLH - 8-Bit 40MHz 48KB Flash MCU | NXP
부품 번호: S9S08DZ48F2MLH ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
S9S08DZ48F2MLH 개요
An 8-bit microcontroller is a compact embedded controller used to monitor inputs, execute control logic, and operate peripherals in systems such as automotive body modules, industrial equipment, consumer products, and sensor-control boards. The S08 architecture belongs to the broader microcontroller and embedded-processing hierarchy. Unlike a general-purpose microprocessor, this device integrates flash, RAM, communication interfaces, timers, analog functions, and debug support into one package.
The S9S08DZ48F2MLH combines 48 KB flash with 4 KB RAM and a 40 MHz maximum clock, providing useful memory capacity for protocol handling and control firmware. Its listed CANbus, I2C, LINbus, SCI, and SPI interfaces allow the controller to connect to automotive networks, sensors, transceivers, and external peripherals. The integrated LCD driver is also relevant to local human-interface displays, while the reported 1.5K x 8 EEPROM adds nonvolatile data storage.
The verified data identifies an automotive-qualified S08 family variant with an operating temperature range of -40 to +125 degrees Celsius. The 64-LQFP package provides 64 terminals and is suited to conventional surface-mount assembly. NXP’s product page describes the part as active, while distributor listings show availability and product documentation; exact current inventory, lead time, and price were not supplied as fixed values.
Typical uses include automotive body-control modules, LIN-connected sensors, CAN gateway equipment, industrial instrumentation, and compact display-control systems. Before designing a replacement, engineers should verify the exact pinout, clock configuration, memory map, peripheral set, electrical limits, and software compatibility from the manufacturer datasheet.
The most important design consideration is firmware and peripheral equivalence: a same-package device is not automatically a functional replacement if its pin multiplexing, timer resources, communication modules, or memory organization differs. This page combines verified source data with cautious qualification of every replacement claim.
Unlike a distributor listing that mainly provides catalog data, this page records the verified source set, distinguishes confirmed specifications from unavailable data, and applies strict drop-in criteria to proposed alternatives. Pricing, lead time, pin names, and unreported compliance claims are intentionally not inferred.
드롭인 대체품: S9S08DZ48F2MLH — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: S9S08DZ48F2MLH (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core, Lifecycle Status, Debug Interface, RAM.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9S08AW48CPUE
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MC9S08AW48CFGER
✅ 드롭인✓ 재고 있음
$4.05 / 개
데이터시트 보기 →MC9S08AW60CFUE
✅ 드롭인✓ 재고 있음
$8.1029 / 개
데이터시트 보기 →MC9S08AC60CPUE
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MC9S08AC60CFUE
✅ 드롭인✓ 재고 있음
$4.05 / 개
데이터시트 보기 →S9S08DZ48F2MLH 최대 정격 & 전기적 특성
| Core | S08 8-bit CISC |
| 최대 클록 주파수 | 40 MHz |
| Flash Memory | 48 KB (48K x 8) |
| RAM | 4 KB |
| EEPROM | 1.5K x 8 |
| Number of I/O | 53 |
| 공급 전압 | 3.3 V / 5 V |
| 동작 온도 | -40°C to +125°C |
| 패키지 | 64-LQFP (10 mm x 10 mm) |
| 실장 유형 | Surface mount |
| Connectivity | CANbus, I²C, LINbus, SCI, SPI |
| Integrated LCD Driver | Yes |
| LIN Physical Layer | Yes |
| Peripheral Features | LVD, POR, PWM, WDT |
| Automotive Qualification | Automotive qualified |
| Terminal Count | 64 |
| Terminal Finish | Tin |
| 수명 주기 상태 | Active |
S9S08DZ48F2MLH 64-lqfp (10 mm x 10 mm) 핀 구성 가이드
S9S08DZ48F2MLH(64-lqfp (10 mm x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: S9S08DZ48F2MLH.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
S9S08DZ48F2MLH 적합 용도: 7 애플리케이션s: Automotive Body-Control Module, LIN Gateway and Sensor Interface, Industrial Instrumentation Controller, Local Display and HMI Controller, CAN-Based Automotive Communication Hub, Embedded Motor and Actuator Control, Embedded On-Chip Debug Development.
Automotive Body-Control Module
The S9S08DZ48F2MLH fits an automotive body controller that coordinates switches, lamps, door inputs, and protection logic while operating across the reported -40°C to +125°C range. Its verified CANbus and LINbus connectivity supports communication with vehicle networks and distributed modules. The 48 KB flash provides room for application firmware, while 4 KB RAM supports scheduling, diagnostics, and short-lived control state. Use the device’s automotive qualification status only after confirming the exact NXP qualification documents and system-level EMC, ESD, load-dump, and transient requirements.
추천
LIN Gateway and Sensor Interface
For a LIN gateway or distributed sensor node, the S9S08DZ48F2MLH combines a reported LIN physical layer, LINbus support, SCI, SPI, and I²C connectivity in one 8-bit controller. A 40 MHz maximum clock and 48 KB flash allow the firmware to handle message routing, device diagnostics, periodic scheduling, and protocol housekeeping. The 53 reported I/O provide integration opportunities, although exact multiplexed functions and pin limits must be checked in the manufacturer datasheet. Validate bus timing, transceiver interface voltage, fault handling, and network wake-up behavior before production release.
추천
Industrial Instrumentation Controller
The S9S08DZ48F2MLH is suitable for industrial instrumentation that acquires inputs, drives actuators, manages local displays, and communicates with a host. Its verified feature set includes 53 I/O, 4 KB RAM, PWM, watchdog, low-voltage detection, power-on reset, and multiple serial interfaces. These resources support compact control boards where a higher-bit MCU may be unnecessary. The -40°C to +125°C specification covers demanding industrial environments, but enclosure temperature, isolation, grounding, protection networks, and EMC requirements must be handled at the system level.
추천
Local Display and HMI Controller
An integrated LCD driver makes the S9S08DZ48F2MLH relevant to compact local human-interface controllers such as small panels, service displays, and embedded equipment interfaces. The controller can combine display update work with real-time input handling because the verified specification includes 48 KB flash, 4 KB RAM, 53 I/O, and 40 MHz maximum operation. The supplied data does not specify LCD segment count, glass interface voltage, contrast control, or display timing, so those parameters must be confirmed before selecting the device for a particular panel. Firmware should also include debouncing, watchdog service, and fault recovery.
추천
CAN-Based Automotive Communication Hub
For a CAN communication hub, the S9S08DZ48F2MLH provides the verified CANbus interface alongside LINbus, SCI, SPI, and I²C connectivity. This combination allows one 8-bit controller to coordinate vehicle-network messaging and connect to local sensors or actuators. Its 40 MHz maximum clock and 48 KB flash are useful for protocol filtering, diagnostics, and application logic, while the reported 1.5K x 8 EEPROM can retain configuration data. Exact CAN transceiver type, bus timing, termination, fault tolerance, and package pin assignments require validation from the official documentation.
추천
Embedded Motor and Actuator Control
The S9S08DZ48F2MLH can serve as the supervisory controller for small motors, valves, relays, and other actuators in automotive or industrial subsystems. Verified PWM support, watchdog, low-voltage detection, power-on reset, 53 I/O, and multiple serial interfaces provide the core resources for closed-loop sequencing and diagnostics. The 40 MHz S08 core is suitable for deterministic control tasks when the firmware is designed around the documented peripherals. Power-stage design remains external to the MCU and must include appropriate drivers, current limiting, thermal protection, and flyback or surge handling.
추천
Embedded On-Chip Debug Development
The S9S08 family is described in the verified comparison material as an embedded automotive and industrial MCU family with on-chip emulation and debug support. The S9S08DZ48F2MLH can therefore support firmware bring-up, peripheral configuration, timing checks, and production programming when the associated NXP development ecosystem is used. The source data does not enumerate debug headers, programming voltages, security features, or tool versions, so engineers should consult the official device documentation and programming guide. A hardware-in-the-circuit validation should confirm startup, reset behavior, watchdog handling, and communication interfaces.
추천
추천 제품 요약
엔지니어링 참조 데이터: S9S08DZ48F2MLH — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S08AW48CPUE | MC9S08AW48CFGER | MC9S08AW60CFUE | MC9S08AC60CPUE | MC9S08AC60CFUE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP | LQFP-64 | 64-LQFP | 64-LQFP | 64-LQFP |
주요 차별점
- Integrated automotive communication capability (vs MC9S08AW48CPUE)
- Confirmed resource combination (vs MC9S08AW48CPUE)
- Reported automotive qualification and temperature range (vs MC9S08AW48CFGER)
- Display-capable integration (vs MC9S08AW60CFUE)
설계 노트
Before routing the 64-LQFP PCB, obtain the official NXP package drawing and pin table. The supplied search data confirms 64 terminals and a 64-LQFP package, but it does not expose individual pin names or exposed-pad details. Treat the package diagram as a preliminary footprint reference only; verify land pattern, pad length, solder mask, paste mask, pin-1 orientation, and thermal or exposed-pad requirements against the manufacturer documentation.
The verified listing identifies 3.3 V and 5 V operation, but it does not provide regulator topology, current limits, voltage tolerances, or I/O thresholds. Confirm supply sequencing, decoupling requirements, reset behavior, and external interface levels in the datasheet. Do not assume that a 5 V supply label makes every I/O 5 V tolerant, especially when the MCU interfaces with automotive transceivers or 3.3 V sensors.
A shared 64-LQFP package and similar headline specifications do not prove a drop-in replacement for the S9S08DZ48F2MLH. Verify the complete pinout, alternate-function muxing, clock tree, memory map, interrupt vector layout, timer assignments, communication instances, ADC resources, watchdog behavior, and programming/debug interface. MC9S08AW48CPUE is a comparison candidate only; validate it against both official datasheets before changing a released design.
For an automotive or industrial controller, place decoupling and support components close to the relevant supply pins and preserve a continuous ground reference beneath the device. Keep communication routing away from high-current switching nodes and motor-driver return currents. The provided data does not include recommended capacitor values or layout diagrams, so these values must be taken from the manufacturer datasheet and validated with measured noise and bus-integrity testing.
The S9S08DZ48F2MLH is an MCU rather than a power semiconductor, so SOA data is not applicable. Its temperature rating is -40°C to +125°C, but junction temperature depends on package dissipation, ambient temperature, airflow, PCB copper, and adjacent heat sources. Check the manufacturer’s thermal characteristics and use the exposed thermal features, if applicable, according to the official land-pattern guidance; do not calculate reliability from the ambient rating alone.
규정 준수 정보
The supplied data states automotive qualified and identifies a -40°C to +125°C operating range, but it does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields remain unknown.