S9S08SG4E2CSC - 8-Bit 40MHz 4KB Flash MCU | NXP
부품 번호: S9S08SG4E2CSC ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
S9S08SG4E2CSC 개요
A microcontroller is a compact embedded-processing semiconductor that combines a CPU core, nonvolatile program memory, RAM, and peripherals on one integrated circuit. The S08 belongs to the MCU hierarchy: S08 core -> 8-bit microcontroller -> embedded controller -> semiconductor. This device targets cost-sensitive, space-constrained control nodes rather than high-compute applications.
Verified features include a 256 x 8 RAM size, I2C, LINbus, SCI, and SPI connectivity, PWM, a watchdog timer, low-voltage detection, and power-on reset. Its 4 KB flash capacity provides space for compact firmware, while the 40 MHz S08 core supports general-purpose control and communication tasks.
The S9S08SG family is positioned for LIN slave, general-market, high-temperature ambient, and space-constrained applications. The listed automotive qualification and four I/O lines make the part relevant to small body, sensing, interface, and monitoring modules, although the exact internal transceiver configuration must be confirmed against the manufacturer datasheet before board release.
Typical uses include temperature-sensing nodes, low-power monitors, LIN-connected peripherals, and compact automotive electronics. The 8-pin SOIC package supports conventional surface-mount assembly while keeping the design footprint small for entry-level embedded systems.
The primary design checks are supply voltage, pin multiplexing, clock configuration, memory limits, and peripheral availability. Do not infer a pin function from the family name alone; use the exact package pinout and datasheet for S9S08SG4E2CSC. The verified data does not provide a full pin mapping or electrical timing table.
This page consolidates verified distributor and manufacturer information, explicit missing-data markers, application context, and selection guidance so engineers can evaluate the part without treating unverified specifications as facts.
드롭인 대체품: S9S08SG4E2CSC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: S9S08SG4E2CSC (동일 폼 팩터 및 풋프린트) — 차이점: Connectivity, Core Processor, Package, Series.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
S9S08SG4E2MSC
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.95 / 개
데이터시트 보기 →S9S08SG8E2CSC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
S9S08SG4E2CSC 최대 정격 & 전기적 특성
| Core | S08, 8-bit |
| Processor Speed | 40 MHz |
| Program Memory | 4 KB flash (4K x 8) |
| RAM Size | 256 x 8 bits |
| Number of I/O | 4 |
| 패키지 | 8-pin SOIC |
| 동작 온도 | -40°C to +85°C |
| Series | S08 |
| Connectivity | I2C, LINbus, SCI, SPI |
| Peripherals | LVD, POR, PWM, WDT |
| Program Memory Type | Flash |
| Core Processor | S08 core |
| Device Type | 8-bit microcontroller |
| 장착 스타일 | Surface mount |
| Automotive Qualification | Automotive qualified |
| EEPROM Size | Not specified in verified data |
S9S08SG4E2CSC 8-pin soic 핀 구성 가이드
S9S08SG4E2CSC(8-pin soic 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: S9S08SG4E2CSC.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
S9S08SG4E2CSC 적합 용도: 6 애플리케이션s: Temperature-Sensing Node, LIN Peripheral Controller, Low-Power Monitoring Module, Compact Automotive Sensor Interface, Small Serial Sensor Hub, Compact Industrial Control Node.
Temperature-Sensing Node
The S9S08SG4E2CSC fits compact temperature-sensing nodes because the verified data specifically identifies temperature-sensing optimization, 4 KB flash, 4 I/O lines, and low-power monitoring positioning. Place the MCU close to the sensor interface, use one serial peripheral for the sensor, and retain the watchdog for unattended operation. The 40 MHz S08 core provides control headroom, while the 8-pin SOIC package keeps the node mechanically compact. Before schematic release, confirm the exact supply voltage, sensor-interface pin assignments, ADC availability, and conversion timing in the manufacturer datasheet.
추천
LIN Peripheral Controller
The S9S08SG4E2CSC is a candidate for a LIN peripheral controller because verified listings identify LINbus connectivity and an automotive-qualified S08SG family position. The device can manage a compact slave node while I2C, SCI, or SPI provide local sensor or configuration paths. Its four I/O lines and 4 KB flash support lean firmware rather than a large protocol stack. Confirm whether the exact ordering code includes the required LIN physical-layer interface and verify the package pinout before routing the bus.
추천
Low-Power Monitoring Module
The S9S08SG4E2CSC suits low-power monitoring modules where a compact controller can periodically read a sensor, evaluate a threshold, and report through a serial interface. Verified data lists watchdog, low-voltage detection, and power-on reset features that support dependable embedded monitoring. Use the 40 MHz core for short control routines without assuming an unverified clock current figure. The 8-pin SOIC package is useful when the enclosure and PCB area are constrained, but battery-life calculations require the exact sleep-current data from the manufacturer documentation.
추천
Compact Automotive Sensor Interface
The automotive-qualified S9S08SG4E2CSC can be evaluated for compact automotive sensor-interface modules when the design stays within its 8-pin, four-I/O resource budget. The S08 core and 4 KB flash are appropriate for small control loops, while I2C, SCI, SPI, and LINbus provide several possible local communication paths. Automotive use still requires system-level validation of temperature, transient immunity, communication timing, and sourcing. Those qualifications are not fully detailed in the supplied data, so engineering review against current NXP documentation is mandatory.
추천
Small Serial Sensor Hub
The S9S08SG4E2CSC can act as a small serial sensor hub when the application needs one or more sensors but not a high pin count. Verified connectivity includes I2C, SCI, and SPI, allowing a common controller to normalize readings from different compact sensors. The 4 KB flash limit requires careful firmware budgeting, and the four I/O lines may constrain simultaneous sensor selection or control signals. Validate electrical levels, peripheral pin multiplexing, and timing before assigning multiple bus functions to the same pins.
추천
Compact Industrial Control Node
The S9S08SG4E2CSC is suitable for a compact general-market control node when the system needs a 40 MHz 8-bit processor, flash-resident firmware, serial connectivity, and a small package. PWM can support simple actuator or indicator timing, while watchdog and low-voltage detection improve basic supervisory behavior. The verified -40°C to +85°C range makes it relevant to equipment outside room-temperature-only conditions, but industrial qualification requirements are not stated. Confirm environmental ratings, EMC expectations, supply tolerances, and production sourcing separately.
추천
추천 제품 요약
엔지니어링 참조 데이터: S9S08SG4E2CSC — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | S9S08SG4E2MSC | S9S08SG8E2CSC |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
주요 차별점
- Compact 4 KB flash configuration (vs S9S08SG8E2CSC)
- Verified automotive positioning (vs S9S08SG4E2MSC)
- Low-power monitoring orientation (vs S9S08SG8E2CSC)
- Documented serial-interface set (vs S9S08SG4E2MSC)
설계 노트
Do not substitute based only on the 8-pin SOIC package. The S9S08SG8E2CSC comparison result identifies 8 KB of flash versus 4 KB for S9S08SG4E2CSC, so the memory difference can invalidate firmware assumptions even when the package looks compatible. Obtain the exact manufacturer pinout and ordering-code documentation before treating any related MPN as a replacement.
Reserve decoupling and programming-test access close to the device, but use the exact recommended values from the manufacturer datasheet rather than estimating values from the 40 MHz core. Because the complete pinout and power requirements are not included in the verified data, finalize capacitor placement, ground return, programming interface, and exposed routing only after the exact S9S08SG4E2CSC documentation is reviewed.
Verify supply voltage, active current, sleep current, and brownout behavior before designing a battery-powered monitor. The verified data identifies low-power monitoring and low-voltage detection but does not provide numeric power values. Estimate battery life only after those values and the actual duty cycle are known, then include margin for temperature and component tolerances.
Confirm which of I2C, LINbus, SCI, and SPI are available on the exact package pins and whether any transceiver or termination components are required. Four I/O lines may not support every listed interface simultaneously. Keep communication traces away from switching nodes and provide the required pull resistors and bus termination according to the selected interface and board-level design.
The verified operating range is -40°C to +85°C, but no thermal resistance or power dissipation data is provided. Validate enclosure temperature, self-heating, and startup behavior across the complete range using the manufacturer limits and the measured board load. Do not infer automotive or industrial thermal suitability solely from the stated temperature range.
규정 준수 정보
The verified search result states automotive qualified, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals certification was supplied. Automotive qualification must not be interpreted as an AEC-Q100 claim without explicit manufacturer evidence.