S9S12C128F0MFUE - 16-Bit 128KB Flash 25MHz MCU | NXP
부품 번호: S9S12C128F0MFUE ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
S9S12C128F0MFUE 개요
A microcontroller is a programmable integrated circuit that executes embedded control software from internal nonvolatile memory and interacts with sensors, actuators, communication links, and human-machine interfaces. The S9S12C128F0MFUE belongs to the flash-based MCU hierarchy, where the S12 core, embedded Flash, digital peripherals, and communication interfaces form a compact embedded-control platform. Its family positioning supports general-purpose industrial control and automotive networking designs rather than a narrowly dedicated signal-processing function.
The most prominent verified features are the 128KB Flash capacity, 25MHz operating frequency, 16-bit S12 core, and broad -40°C to +125°C temperature range. Flash memory supports firmware retention without external nonvolatile storage, while the higher-frequency core provides computational headroom for real-time control tasks. The automotive temperature grade makes the device suitable for applications where temperature variation is greater than in ordinary commercial environments, subject to system-level qualification.
Technically, the device integrates a 16-bit core with embedded program memory and package-level I/O in an 80-terminal QFP. The supplied search results describe the S12C family as part of a 48-, 52-, and 80-pin flash-based MCU family designed for general-purpose industrial and automotive network applications. The exact peripheral inventory, RAM capacity, supply voltage, electrical limits, and complete pin assignments were not provided in the verified data and should be confirmed in the manufacturer reference manual before design release.
Typical application directions include automotive body or network control modules, industrial automation controllers, embedded communication equipment, sensor-interface systems, and general-purpose industrial electronics. For each design, engineers should verify clock requirements, peripheral multiplexing, electrical timing, reset behavior, and software support against the official datasheet. The 80-pin QFP also requires careful land-pattern matching and thermal-aware PCB layout because of its larger body and gull-wing leads.
When designing around the S9S12C128F0MFUE, use the verified QFP-80 footprint and route all required power, ground, clock, reset, programming, and communication nets according to the official pinout. Do not infer analog, communication, or timing functions from the family name alone; each pin and peripheral must be checked in the reference manual. This page combines verified part identity, package data, temperature limits, sourcing links, and selection caveats without inventing unprovided electrical specifications.
The information below is intended to help engineers locate the correct datasheet, assess commercial availability, compare verified attributes, and select the part for temperature- and memory-sensitive embedded systems. The manufacturer reference manual remains the controlling source for final electrical, pinout, software, and qualification decisions.
드롭인 대체품: S9S12C128F0MFUE — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: S9S12C128F0MFUE (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Operating Temperature Range, Package, Program Memory Size, Core.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9S12C64MFUE
✅ 드롭인✓ 재고 있음
$10.2 / 개
데이터시트 보기 →MC9S12C96CFAE557
✅ 드롭인✓ 재고 있음
$4.95 / 개
데이터시트 보기 →MC9S12D64MFUER
✅ 드롭인✓ 재고 있음
$1.0524 / 개
데이터시트 보기 →MC9S12D64CFUER
✅ 드롭인✓ 재고 있음
$10.4 / 개
데이터시트 보기 →MC9S12XEQ512CAG
✅ 드롭인✓ 재고 있음
$14.4 / 개
데이터시트 보기 →S9S12C128F0MFUE 최대 정격 & 전기적 특성
| Device Type | 16-bit microcontroller |
| Core | S12 core |
| Flash Memory | 128KB |
| Maximum Core Frequency | 25MHz |
| 동작 온도 범위 | -40°C to +125°C |
| Temperature Grade | Automotive qualified |
| Package Code | QFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Number of Terminals | 80 |
| Program Memory Type | Flash-based |
| Core Word Width | 16-bit |
| Application Category | General-purpose industrial and automotive network applications |
| 실장 유형 | Surface mount |
S9S12C128F0MFUE square 핀 구성 가이드
S9S12C128F0MFUE(square 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: S9S12C128F0MFUE.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
S9S12C128F0MFUE 적합 용도: 6 애플리케이션s: Automotive Body Control, Industrial Automation Controller, Automotive Network Interface, Sensor Interface System, Embedded Communication Equipment, General-Purpose Industrial Electronics.
Automotive Body Control
The S9S12C128F0MFUE is a reasonable candidate for an automotive body-control module because the verified data identifies a 16-bit S12 core, 128KB Flash, 25MHz operation, automotive qualification, and a -40°C to +125°C temperature range. It can support firmware for distributed input conditioning, actuator control, diagnostic handling, and communication coordination when the required peripherals and electrical limits are confirmed in the reference manual. The 80-pin QFP provides external routing access for power, reset, clock, programming, and application I/O, although exact functions cannot be assigned without the official pin table. Engineers should validate low-temperature startup, transient immunity, ground strategy, watchdog behavior, and software compatibility before production. The verified data does not specify CAN, LIN, ADC, timer, or other peripheral capabilities, so no such feature should be assumed.
추천
Industrial Automation Controller
The S9S12C128F0MFUE can suit a general-purpose industrial automation controller because the verified family description targets flash-based industrial and automotive network applications. Its 128KB Flash provides embedded firmware capacity, while the 25MHz maximum core frequency offers processing headroom for sequencing, state-machine logic, and supervisory control. The part must be reviewed against the exact controller requirements: RAM, I/O count, analog channels, communication interfaces, timing, supply voltage, and watchdog requirements are not present in the supplied verified snippets. The square 80-pin QFP also affects board area and routing density, but its gull-wing leads can be easier to inspect and rework than a leadless package. Validate the manufacturer electrical limits and pin multiplexing before schematic capture. For production, use the official package drawing and reference manual rather than inferring peripheral assignments from the S12 family name.
추천
Automotive Network Interface
The S9S12C128F0MFUE is a candidate for an automotive network interface module because the verified material describes an automotive-qualified S12C-family MCU intended for automotive network applications. Its 16-bit core and 25MHz maximum frequency can support protocol handling, supervisory logic, diagnostics, and application processing, while 128KB Flash can hold embedded configuration and firmware. The supplied data does not identify a specific CAN, LIN, or other network peripheral, so the communication claim must be confirmed in the official reference manual before selecting the device for a network PHY or transceiver. Layout engineers should isolate interface signals, provide appropriate termination and protection, and verify clock and reset requirements. Qualification should include temperature extremes, power transients, ESD strategy, and software fault handling. This part should not replace a network transceiver by itself.
추천
Sensor Interface System
The S9S12C128F0MFUE may fit a sensor-interface system that requires embedded Flash, deterministic control, and a broad temperature range. Its verified 25MHz maximum frequency and 128KB Flash support acquisition logic, filtering, calibration data, state management, and communications firmware, but the supplied snippets do not confirm ADC resolution, analog inputs, sensor interfaces, or external memory features. Those functions must be checked against the official pinout and electrical tables before choosing the MCU. In implementation, place analog and digital grounds according to the reference design, keep sensitive sensor paths away from switching nodes, and account for input filtering and calibration. The 80-pin QFP footprint should be checked against the available board area and assembly process. Automotive qualification may be useful for mobile or harsh equipment, while industrial designs still require their own environmental and reliability validation.
추천
Embedded Communication Equipment
The S9S12C128F0MFUE can serve as the control processor in embedded communication equipment when the board needs a flash-based 16-bit MCU and a 25MHz maximum operating frequency. Its verified 128KB Flash is suitable for firmware storage, while the wide -40°C to +125°C range can support equipment deployed in industrial or vehicle environments. However, the available evidence does not specify the communication peripherals, RAM, package-level multiplexing, or protocol support. Confirm those items in the manufacturer reference manual before selecting it for a serial, Ethernet, CAN, LIN, or other interface. The design should include proper decoupling, defined reset behavior, clock stability, debug or programming access, and protection for external connectors. Because the part is an 80-pin QFP, verify routing density and thermal performance against the enclosure and production process.
추천
General-Purpose Industrial Electronics
The S9S12C128F0MFUE is described by verified sources as a general-purpose flash-based MCU for industrial and automotive network applications, making it broadly relevant to industrial electronics such as equipment controllers, interface modules, and supervisory platforms. The 16-bit S12 core and 25MHz maximum frequency provide a clear performance identity, while 128KB Flash supports embedded firmware. Before committing to it, verify RAM, I/O, communication, analog, timing, and power requirements because those details are not included in the verified excerpts. Use the official pinout to create the schematic and the official package drawing to create the footprint; do not rely on a generic QFP symbol. For robust products, include brownout and reset analysis, watchdog strategy, ESD protection, thermal review, and programming or field-update provisions. The part’s automotive qualification may support harsh environments, but the final product still needs application-specific validation.
추천
추천 제품 요약
엔지니어링 참조 데이터: S9S12C128F0MFUE — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S12C64MFUE | MC9S12C96CFAE557 | MC9S12D64MFUER | MC9S12D64CFUER | MC9S12XEQ512CAG |
|---|---|---|---|---|---|---|
| Package | QFP-80 | QFP-80 candidate; exact package data not verified | QFP-80 candidate; exact package data not verified | QFP-80 candidate; exact package data not verified | QFP-80 candidate; exact package data not verified | QFP-80 candidate; exact package data not verified |
| Brand | NXP Semiconductors | Freescale Semiconductor, Inc | Freescale Semiconductor, Inc | Freescale Semiconductor, Inc | Freescale Semiconductor, Inc | Freescale Semiconductor, Inc |
| Core | S12 core | S12-family candidate; exact core verification unavailable | S12-family candidate; exact core verification unavailable | S12-family candidate; exact core verification unavailable | S12-family candidate; exact core verification unavailable | S12-family candidate; exact core verification unavailable |
| Flash Memory | 128KB | 64KB indicated by MPN naming; verify | 96KB indicated by MPN naming; verify | 64KB indicated by MPN naming; verify | 64KB indicated by MPN naming; verify | 512KB indicated by MPN naming; verify |
주요 차별점
- Verified embedded memory capacity (vs MC9S12C64MFUE)
- Verified maximum core frequency (vs MC9S12C96CFAE557)
- Verified broad temperature grade (vs MC9S12D64MFUER)
- Verified package identity (vs MC9S12D64CFUER)
- Verified application positioning (vs MC9S12XEQ512CAG)
설계 노트
Use the official QFP-80 package drawing to create the land pattern, rather than a generic 80-pin symbol. Confirm body size, lead pitch, pin numbering, pad dimensions, solder-mask clearance, and courtyard. The verified data confirms 80 gull-wing terminals but does not provide the package dimensions, so the mechanical drawing is the controlling source.
Route reset, clock, programming, and communication nets according to the manufacturer reference schematic and pin table. Keep sensitive signal paths away from noisy power-switching nodes and provide local decoupling exactly as specified in the official reference design. Do not assign a peripheral function to a pin from the MPN name alone; verify multiplexing and alternate-function requirements first.
The verified operating range is -40°C to +125°C, but junction-temperature limits and power dissipation were not supplied. Validate thermal performance with the exact supply voltage, clock, I/O loading, and ambient temperature used in the final product. Provide adequate copper and via structure around the QFP while following the manufacturer’s thermal-layout guidance, and do not infer thermal ratings from the temperature grade alone.
A same-family or similar-looking MPN is not automatically a drop-in replacement. Confirm pin-by-pin mapping, package body and lead pitch, memory size, RAM, clock limits, supply voltage, peripherals, interrupt behavior, and software compatibility. In particular, the supplied search data does not verify the listed alternatives as electrically and pin-for-pin equivalent to S9S12C128F0MFUE.
규정 준수 정보
The verified product description states that the part is automotive qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not provided in the verified data.
