Silicon Labs

SI3016-F-FSR - 3.3V 16-SOIC Global DAA | Silicon Labs (Tape & Reel)

부품 번호: SI3016-F-FSR ✓ 활성
3.3 V Vdss 7 microamperes Id 16-pin small outline package (16-SOIC) Package
MOQ: 1 |

SI3016-F-FSR 개요

The Silicon Labs SI3016-F-FSR is a 3.3 V enhanced global direct access arrangement, or DAA, that provides a programmable line-side interface for telephone systems. The 16-pin small outline integrated circuit integrates line-voltage monitoring, loop-current monitoring, parallel handset detection, overload protection, and a programmable line interface in one device.

A direct access arrangement is the line-side interface between a voice codec or modem and the analog telephone network. It controls line voltage and loop current while providing the ringing, speech-path, and off-hook functions required by global PSTN equipment. Integrating these functions reduces the need for a discrete analog front end, isolation transformer, relays, opto-isolators, and a separate two-wire to four-wire hybrid.

The SI3016-F-FSR operates from a 3.3 V supply and is specified for 3.2 dBm transmit and receive levels. Its parallel handset-detection function supports parallel off-hook sensing, while the overload-protection feature limits the effect of excessive line voltage. The on-hook line-monitor current is specified at 7 microamperes, helping the host system determine line state with low standby consumption.

The programmable line interface is the key architectural feature. Registers allow the host processor to configure operating characteristics instead of relying on a large collection of discrete analog networks. This makes the SI3016-F-FSR suitable for designs in which the same line interface must serve multiple international telephone-network requirements or be adjusted during production and test.

Typical applications include Voice over IP terminal adapters, voice gateways, PBX line cards, fax and multifunction-printer interfaces, data modems, and embedded telephone equipment. The device is also useful in legacy fax machines and other products that retain a copper-loop connection while using a digital processor for call control and audio processing.

Designers should follow the Silicon Labs si3016 datasheet for the line-termination network, external component values, hook-state timing, and PCB layout. Keep sensitive analog and telephone-network nodes away from high-current digital paths, and place line-interface and bypass components close to their associated pins to reduce coupling and ringing.

This page consolidates the device function, verified distributor availability, same-family alternatives, and practical integration considerations. It supports faster component selection for engineers designing compact, programmable telephone line interfaces without treating the DAA as a generic modem block.

드롭인 대체품: SI3016-F-FSR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: SI3016-F-FSR (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Line Interface, Package, Handset Detection, On-Hook Line Monitor Current.

Skyworks Solutions
Product Type: Enhanced global direct access arrangement (DAA) and V.90 modem IC
Package: 16-pin SOIC
Handset Detection: Parallel
비교 대상: SI3016-F-FSR →
Skyworks Solutions
Product Type: Integrated direct access arrangement (DAA) line-side device
Line Interface: Programmable telephone-line interface
Package: 16-pin SOIC
비교 대상: SI3016-F-FSR →

SI3016-BS

✅ 드롭인
Skyworks Solutions
📦 16-SOIC
Enhanced global direct access arrangement (DAA) and V.90 modem IC · Line-side device for processors with an integrated system-side DAA · 3.3 V · 3.2 dBm · 7 µA · Integrated · Integrated · Parallel

가격 문의

데이터시트 보기 →

SI3016-FS

✅ 드롭인
Skyworks Solutions
📦 16-SOIC
Integrated direct access arrangement (DAA) line-side device · V.90 · 3.3 V · Programmable telephone-line interface · 16-pin SOIC · 16 pins · Surface mount · Gull wing

가격 문의

데이터시트 보기 →

SI3016-F-FSR 사양

Product Type Enhanced global direct access arrangement (DAA)
공급 전압 3.3 V
패키지 16-pin small outline package (16-SOIC)
Line Interface Programmable
Transmit Level 3.2 dBm
Receive Level 3.2 dBm
On-Hook Line Monitor Current 7 microamperes
Line Voltage Monitor Integrated
Loop Current Monitor Integrated
Handset Detection Parallel detection
Overload Protection Integrated
Telephone Network Support Global line-side interface
Modem Classification V.90 line-side modem interface
External Hybrid Requirement No discrete two-wire to four-wire hybrid required
실장 유형 Surface mount

SI3016-F-FSR 16-pin small outline package (16-soic) 핀 구성 가이드

SI3016-F-FSR(16-pin small outline package (16-soic) 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

SI3016-F-FSR의 16-pin small outline package (16-soic) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: SI3016-F-FSR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

SI3016-F-FSR 적합 용도: 6 애플리케이션s: Voice over IP Terminal Adapter, PBX Line Card, Analog Fax Machine Interface, Analog Data Modem, Legacy Voice Gateway, Multifunction Printer Fax Module.

📞

Voice over IP Terminal Adapter

The SI3016-F-FSR fits the analog line side of a Voice over IP terminal adapter because its 3.3 V supply, 7 microampere on-hook line-monitor current, and parallel handset detection suit low-power embedded voice systems. Place the device between the host codec or modem and the external telephone-network interface to monitor line voltage and loop current. Unlike a discrete implementation, the integrated DAA removes the separate analog front end, isolation transformer, relays, opto-isolators, and two-wire to four-wire hybrid. The programmable line interface also allows one board layout to be configured for different regional line-network requirements. Confirm host firmware support for the SI3016 register set and follow the manufacturer line-network and protection recommendations during PCB layout.

🏢

PBX Line Card

A PBX line card can use the SI3016-F-FSR to convert each analog PSTN connection into a digital voice-channel interface. The integrated line-voltage monitor, loop-current monitor, parallel handset detection, and overload protection reduce the component count required per channel. Its programmable line interface is particularly useful in multi-region systems where line characteristics can be adjusted through the host controller. The 3.2 dBm transmit and receive levels should be checked against the codec and line-network design. Keep telephone-network traces separated from digital signals, apply the protection network specified by the manufacturer, and replicate the reference layout consistently across the card.

📠

Analog Fax Machine Interface

The SI3016-F-FSR is suitable for the line interface in an analog fax machine because it combines line supervision, overload protection, and handset detection in a 16-pin package. These functions allow the fax controller to determine when the remote endpoint goes off hook and respond to line-state changes without a large collection of discrete circuits. The device also supports the transmit and receive levels required by an integrated voice modem path. Use the manufacturer recommendations for the external line network, ring-detection timing, and protection components. Because the Si3016 family includes several ordering suffixes, confirm the required supply, regional configuration, and firmware support before releasing a production PCB.

🌐

Analog Data Modem

The SI3016-F-FSR provides the line-side DAA functions required by a V.90-class analog modem while reducing the discrete component count. Integrated line-voltage and loop-current monitoring support modem handshake and call-progress control, while parallel handset detection identifies an off-hook condition. At 3.3 V, the device is appropriate for modems built around modern embedded processors and mixed-signal codecs. Place the DAA close to the line-interface components and keep the telephone-network side isolated from high-current switching nodes. Verify the modem firmware supports the programmable configuration and confirm the specified 3.2 dBm transmit and receive levels against the complete analog signal path.

🔀

Legacy Voice Gateway

A legacy voice gateway that bridges PSTN calls to IP networks can use the SI3016-F-FSR as the analog-facing DAA. Its programmable line interface, line-state monitors, and overload protection concentrate the key telephone-line functions into a single 16-pin device, allowing the gateway to reuse an existing analog front end design. The 7 microampere on-hook monitor current supports low-power channel monitoring when multiple gateways or line cards are deployed. Use the manufacturer external-network schematic for isolation and surge handling, and validate line-state timing with the host firmware. Configuration differences between Si3016 suffixes must be resolved before a board built for one suffix is reused for another.

🖨️

Multifunction Printer Fax Module

The SI3016-F-FSR can serve the analog fax path in a multifunction printer when the product retains a telephone connection for receiving legacy fax calls. Parallel handset detection and integrated line-state monitoring allow the printer controller to identify line activity without a separate relay-based detection circuit. The 16-pin package limits board area, while the 3.3 V operating supply matches many embedded printer controllers. Follow the manufacturer recommendations for the line-termination network and telephone transient protection, and keep the fax modem path isolated from switching power converters and display circuitry. Confirm that the printer firmware supports the exact Si3016 configuration and line-region requirements.

What is the SI3016-F-FSR and what does it do?
The SI3016-F-FSR is a 3.3 V, 16-pin integrated direct access arrangement that connects a voice codec or modem to an analog telephone line. According to the Silicon Labs si3016 datasheet, it integrates line-voltage monitoring, loop-current monitoring, parallel handset detection, overload protection, and a programmable line interface. It replaces several separate line-interface blocks, including a discrete analog front end, isolation transformer, relays, opto-isolators, and a two-wire to four-wire hybrid.
What are the key specifications of SI3016-F-FSR that engineers should know?
The SI3016-F-FSR operates from 3.3 V, uses a 16-pin small outline package, and provides a programmable global line-side interface. The Silicon Labs si3016 datasheet identifies integrated line-voltage monitoring, loop-current monitoring, parallel handset detection, and overload protection, with 3.2 dBm transmit and receive levels. Its on-hook line-monitor current is 7 microamperes, making it suitable for voice terminals, gateways, PBX line cards, and fax interfaces.
Where can I download the SI3016-F-FSR datasheet PDF?
The SI3016-F-FSR datasheet PDF is available from the Silicon Labs si3016 document linked on this page. The document describes the integrated DAA architecture, programmable line interface, external network requirements, pin assignments, and operating characteristics. Use the manufacturer datasheet for the complete pin-description table, recommended line-termination components, and PCB implementation details rather than relying on distributor summaries.
Where can I find the SI3016-F-FSR pinout?
The SI3016-F-FSR pinout is documented in the manufacturer si3016 datasheet under the package and pin-description information. The device uses a 16-pin small outline package, with the package drawing identifying pin 1 and the counter-clockwise numbering sequence. Confirm every signal name, supply connection, ground connection, and test point against the datasheet before assigning PCB tracks or designing the line-termination network.
Can the SI3016-F-FSR be used for Voice over IP terminal adapters?
Yes, the SI3016-F-FSR is well suited to the analog line side of a Voice over IP terminal adapter. Its 3.3 V supply matches many embedded voice designs, while the programmable line interface handles line-state control and hook detection for an external PSTN connection. The 7 microampere on-hook monitor current and integrated parallel handset detection reduce the host processor's involvement in line supervision.
What is the difference between SI3016-F-FSR and SI3016-FS?
The SI3016-F-FSR is the enhanced 3.3 V version of the Si3016 family, and SI3016-FS is another ordering-code variant listed for the same 16-pin small outline DAA architecture. The family shares the line-side monitoring and handset-detection functions, but suffix-specific electrical details should be confirmed in the ordering guide. Both entries use a 16-SOIC format, which makes the footprint a practical starting point for replacement review, although firmware, supply, and regional-network requirements still need verification.
SI3016-F-FSR vs SI3016-BS - which is the better DAA for a new design?
Choose the SI3016-F-FSR when a new design requires the enhanced 3.3 V global DAA configuration identified in the Silicon Labs datasheet. SI3016-BS belongs to the same 16-pin Si3016 DAA family, so it is the relevant same-family comparison, but its suffix-specific supply, region, and configuration details must be checked in the ordering guide. The decision should follow the required line interface, host firmware support, component availability, and production qualification rather than package similarity alone.
When should I choose SI3016-F-FSR over SI3016-BS?
Select SI3016-F-FSR when your product needs the enhanced 3.3 V global direct access arrangement and its corresponding firmware and board configuration. SI3016-BS may suit a design built around that specific ordering code, but it should not be substituted without confirming supply voltage, programmable register behavior, line-network configuration, and lifecycle requirements. Both devices share the Si3016 product architecture and 16-pin package format, so the deciding factors are configuration and availability rather than a mechanical change.
Is the SI3016-F-FSR suitable for a PBX line card?
The SI3016-F-FSR is suitable for a PBX line card that connects digital voice processing to an analog telephone line. Its integrated line-voltage and loop-current monitoring, parallel handset detection, overload protection, and programmable line interface reduce the external analog circuitry required per line. In a multi-channel card, maintain consistent line-interface layout, provide the network-side protection specified by the datasheet, and isolate high-energy telephone transients.
Is SI3016-F-FSR the same as SI3016-F-FSRR?
The SI3016-F-FSR and SI3016-F-FSRR are closely related orderable variants of the Si3016 16-pin DAA, but the final suffix identifies a different packaging or ordering configuration. Electrical functionality must be confirmed from the manufacturer ordering guide before substituting one for the other. Both use the same 16-pin small outline format, so the PCB land pattern is compatible, while reel packing, labeling, and ordering details differ.
What can replace the SI3016-F-FSR in an existing design?
The closest documented replacement candidates are the SI3016-F-FSRR, SI3016-BS, and SI3016-FS because they appear in the same Si3016 DAA family and use a 16-pin small outline package. A replacement is valid only after confirming supply voltage, register configuration, firmware support, telephone-network requirements, and lifecycle status. Do not treat a shared package as proof of functional equivalence because the ordering suffix can change configuration or regional requirements.
Is there a Texas Instruments equivalent for the SI3016-F-FSR?
The Texas Instruments SI3016-FS is the closest cross-brand candidate identified for the same 16-SOIC modem-interface family. It uses the same 16-pin small outline footprint, but engineers must verify supply voltage, DAA configuration, programmable-register behavior, and firmware support before substituting it. A footprint-compatible part is not automatically a functional drop-in, particularly when global line-network and ordering-code requirements differ.
Where can I buy the SI3016-F-FSR online?
The SI3016-F-FSR can be requested through the Request a Quote form on this page, which is the fastest route for current stock, minimum order quantity, and lead-time confirmation. The part is also listed by authorized distributors and electronics suppliers under the same MPN. Provide the required quantity, target date, and packaging preference with the request so the exact ordering code can be confirmed.
What is the price of the SI3016-F-FSR?
Current SI3016-F-FSR pricing depends on order quantity, packaging, and market availability, so use the Request a Quote form on this page for the price that applies to your purchase. The same form can confirm stock, minimum order quantity, and lead time. Quoting the exact MPN, SI3016-F-FSR, helps prevent a substitution with a different reel, temperature, or ordering suffix.
What is the lead time for the SI3016-F-FSR?
Lead time for the SI3016-F-FSR depends on current inventory, production allocation, and the quantity requested. Submit the required quantity and target ship date through the Request a Quote form on this page for a current commitment. The manufacturer ordering guide should also be checked to confirm that the exact MPN, package, and operating-temperature suffix match the assembled product.
Is the SI3016-F-FSR in stock?
Stock status for the SI3016-F-FSR changes with procurement volume and replenishment cycles, so use the Request a Quote form on this page for a current availability confirmation. Include the required quantity, date code preference, and shipment destination. Confirm the full ordering code on the acknowledgment to ensure the supplied part remains SI3016-F-FSR rather than a different packaging variant.

엔지니어링 참조 데이터: SI3016-F-FSR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the SI3016-F-FSR for a new 3.3 V design that needs a compact, programmable line-side DAA for PSTN voice, fax, or modem applications. Its integrated line-voltage and loop-current monitors, parallel handset detection, and overload protection can reduce external circuitry and simplify multi-region configuration. Use SI3016-BS when an existing platform already targets that ordering configuration and its supply, registers, and firmware are confirmed. Consider SI3016-F-FSRR when the same Si3016-F ordering family is required with a different packing or orderable suffix. The Texas Instruments SI3016-FS is a cross-brand candidate worth evaluating for a 16-SOIC modem-interface design, but its suffix-specific electrical configuration and host support must be verified. In every case, package compatibility alone is insufficient; the telephone-network requirements, protection strategy, firmware, and lifecycle status determine whether substitution is safe.

대체품과의 비교

파라미터 이 제품 SI3016-BS SI3016-F-FSRR SI3016-FS
Brand Silicon Labs Silicon Labs Skyworks Solutions Inc. Texas Instruments
Package 16-SOIC 16-SOIC - same footprint 16-SOIC - same footprint 16-SOIC - same footprint
Product Type Enhanced global direct access arrangement Si3016 direct access arrangement Si3016 direct access arrangement Modem line-side interface

주요 차별점

  • Provides an enhanced global DAA with several line functions consolidated in one package (vs SI3016-FS)
  • Matches the established Si3016 16-SOIC mechanical format (vs SI3016-BS)
  • Operates directly from a 3.3 V system rail (vs SI3016-F-FSRR)

설계 노트

Implement the telephone-network side using the reference layout in the Silicon Labs si3016 datasheet. Keep the line-voltage and loop-current sensing paths away from switching-node traces, processor clock signals, and the DAA supply return. Place external line-interface components close to their associated device pins, and route sensitive analog nodes as short as practical to reduce susceptibility to radiated and conducted coupling.

Do not select a substitute solely because it uses a 16-SOIC package. The SI3016 ordering suffixes can identify different supply, configuration, and packing arrangements. Before reusing a PCB or changing the installed part, compare the ordering guide, supply voltage, register configuration, host firmware support, line-network requirements, and lifecycle status. A footprint match establishes mechanical feasibility, not guaranteed functional equivalence.

Follow the manufacturer's recommended supply decoupling and bypass layout for the 3.3 V DAA supply. Telephone-interface transients can disturb the device even when the host logic operates from the same rail. Provide the specified protection and isolation components at the line-network boundary, keep their return currents away from sensitive signal grounds, and test hook detection and overload recovery under worst-case line conditions.

Validate line-state timing and parallel handset detection with the host firmware rather than relying only on nominal timing from a generic interface description. The 7 microampere on-hook monitor current provides a low-power state indication, but actual detection behavior also depends on the external line network, loop current, and regional telephone parameters. Use production test fixtures that reproduce the intended line conditions.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The SI3016-F-FSR is a telephone line-side interface IC rather than an automotive-qualified device. Compliance declarations were not identified for this ordering code and should be confirmed with the manufacturer before a regulated production release.

관련 검색

SI3016-F-FSR datasheet SI3016-F-FSR pinout SI3016-F-FSR datasheet pdf SI3016-F-FSR equivalent SI3016-F-FSR replacement SI3016-F-FSR vs SI3016-FS SI3016-F-FSR vs SI3016-BS SI3016-F-FSR 3.3V DAA SI3016-F-FSR 16-SOIC footprint SI3016-F-FSR Voice over IP SI3016-F-FSR PBX line card SI3016-F-FSR price SI3016-F-FSR stock Silicon Labs SI3016-F-FSR SI3016-F-FSR programmable line interface

관련 부품 & 용어

Silicon Labs Skyworks Solutions Inc. Texas Instruments SI3016-F-FSR SI3016-BS SI3016-F-FSRR SI3016-FS direct access arrangement DAA line-side interface programmable line interface telephone line interface Voice over IP analog modem V.90 modem PBX line card fax interface line-voltage monitor loop-current monitor parallel handset detection overload protection on-hook monitoring 16-SOIC small outline package surface-mount integrated circuit
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기