SIM7000A - LTE Cat-M/NB-IoT Module, GNSS | SIMCom
부품 번호: SIM7000A ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $19.08 | $19.08 |
| 10 | $18.5 | $185.00 |
| 100 | $17.6 | $1,760.00 |
| 500 | $16.9 | $8,450.00 |
| 1,000 | $16.2 | $16,200.00 |
SIM7000A 개요
A cellular IoT module is a self-contained wireless communication subsystem that integrates a baseband processor, RF transceiver, power management, and memory into a single unit, sitting at the device level of the wireless connectivity hierarchy (module -> cellular modem -> M2M/IoT device -> IoT system). LPWA technologies such as Cat-M1 and NB-IoT trade bandwidth for dramatically lower power consumption and superior deep-indoor penetration compared with 2G/3G/4G broadband modems.
Key features include dual-mode LTE Cat-M1/NB-IoT operation, multi-GNSS positioning (GPS/GLONASS/BeiDou/Galileo), and abundant interfaces including UART, GPIO, PCM, and I2C. The module is designed for applications requiring low-latency, medium-throughput data communication across varied radio propagation conditions, with ultra-low power consumption suited to battery- and solar-powered devices.
A major engineering advantage is footprint compatibility: the SIM7000A LGA package is compatible with the legacy SIM900 and SIM800F modules, and its AT command set is mostly compatible with the SIM800F. This minimizes redesign investment and shortens time-to-market for designs migrating from 2G to LTE LPWA networks as carriers sunset legacy 2G infrastructure.
Typical applications include asset tracking, smart metering, wearables, and remote telemetry in North American Cat-M1/NB-IoT networks, where the SIM7000A is a regional variant tuned for US carrier band support.
Design consideration: supply the VBAT pins from a source capable of up to 2 A burst current with generous bulk capacitance to prevent voltage sag during RF transmit bursts.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: SIM7000A — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: SIM7000A (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, Antenna, GNSS, Interfaces, Technology.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
SIM7000E
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$17.59 / 개
데이터시트 보기 →SIM7000G
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$27.97 / 개
데이터시트 보기 →SIM7000X
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SIM7070G
✅ 드롭인✓ 재고 있음
$11.2 / 개
데이터시트 보기 →SIM800F
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SIM7000A 사양 (제조사 공개)
| Technology | LTE Cat-M1 (eMTC) / NB-IoT |
| GNSS | Integrated multi-GNSS positioning |
| Package Dimensions | 24 x 24 mm LGA |
| 실장 유형 | SMD (LGA) |
| Data Rate Class | Low latency, medium throughput |
| Interfaces | UART, GPIO, PCM, I2C |
| AT Command Compatibility | Mostly compatible with SIM800F |
| Footprint Compatibility | Compatible with SIM900 and SIM800F |
| Peak Supply Current (VBAT) | Up to 2 A |
| Recommended VBAT Bulk Capacitance | More than 300 uF (1000 uF typical if supply < 2 A) |
| Allowed VBAT Voltage Drop | Less than 300 mV during transmit burst |
| Regional Variant | North America (A variant) |
| RoHS 상태 | RoHS compliant |
| 카테고리 | 2G/3G/4G/5G Modules (distributor classification) |
SIM7000A 인터페이스 및 커넥터
SIM7000A에 대해 제조사에서 공개한 인터페이스 목록이 없습니다. 커넥터 및 헤더 세부 정보는 제조사 문서를 참조하십시오.
다음을 참조하십시오: 제조사 문서 전체 확장 헤더 핀아웃 및 커넥터 핀 번호는 다음을 참조하십시오.
일반적인 애플리케이션
SIM7000A 적합 용도: 6 애플리케이션s: Asset Tracking, Smart Metering, Wearable and Portable IoT Devices, Remote Telemetry and SCADA, Smart City and Parking Sensors, Maker and Prototype IoT (Arduino/ESP32).
Asset Tracking
The SIM7000A fits asset tracking because it combines LTE Cat-M1/NB-IoT connectivity with integrated multi-GNSS positioning in one module, eliminating a separate GPS receiver and reducing BOM cost. In a typical tracker, the host MCU sends AT commands over UART to report position and sensor data via TCP/UDP or CoAP/LwM2M over the carrier network. Cat-M1 supports connected-mode mobility for in-transit tracking, while NB-IoT's deep coverage reaches containers and indoor storage. Power-saving modes extend battery life between charges; the trade-off is that LPWA data rates are modest, so trackers should batch or compress telemetry. Bulk VBAT capacitance (300 uF to 1000 uF per the user manual) is essential to survive 2 A transmit bursts on a small battery.
추천
Smart Metering
Smart electricity, gas, and water meters benefit from the SIM7000A's NB-IoT mode, which offers deep-indoor penetration and power-saving operation ideal for meters installed in basements and pits. The module's I2C and GPIO interfaces connect directly to metrology front-ends and tamper switches, while UART carries AT-command data sessions to utility head-end systems. Low latency supports on-demand reads and remote disconnect commands, and medium-throughput Cat-M1 handles firmware-over-the-air updates of the metering image. The 24 x 24 mm LGA footprint is reflow-compatible with automated meter assembly lines, and footprint compatibility with SIM900/SIM800F lets meter vendors reuse existing PCB designs when migrating from 2G as carriers sunset those networks in North America.
추천
Wearable and Portable IoT Devices
Wearables such as child/elderly locators, pet trackers, and medical alert devices use the SIM7000A because its LPWA power profile and integrated GNSS minimize size and battery drain versus broadband LTE modems. The PCM interface supports voice-grade audio paths for emergency-call wearables where carriers permit, while Cat-M1 data handles location reporting every few seconds to minutes. The 24 x 24 mm LGA module integrates power management, keeping the wearable PCB compact. Designers must budget the 2 A burst current from a small Li-ion cell using the recommended bulk capacitance to avoid brownouts during transmit bursts, and should exploit power-saving modes between position fixes to stretch battery runtime toward multi-day or multi-week targets.
추천
Remote Telemetry and SCADA
Industrial telemetry endpoints - tank levels, pump stations, pipeline sensors - use the SIM7000A where wired backhaul is uneconomical. NB-IoT coverage penetrates metal enclosures and remote sites, and the module's UART links to Modbus-capable host MCUs that poll field sensors. I2C and GPIO support local valve or relay control, enabling closed-loop actuation without a second radio. Reports of a few hundred bytes per interval are well within LPWA throughput, and the module's design for varied radio propagation conditions suits installations at coverage edges. Power over solar with a small buffer battery works because sleep-mode draw is LPWA-class. FCC-certified modules (FCC ID 2AJYU-SIM7000A) also simplify end-product certification for North American deployments.
추천
Smart City and Parking Sensors
Smart-city nodes - parking occupancy sensors, streetlight controllers, environmental monitors - deploy at high density, making the SIM7000A's cost (~$19 as of 2026-10-20) and NB-IoT deep coverage attractive. Thousands of nodes per cell are supported by NB-IoT's massive connection density; each node sends small occupancy or status packets with low latency, matching the module's design target. The I2C bus connects magnetometer or ultrasonic parking sensors, GPIO drives streetlight relays, and the integrated GNSS geo-tags each node automatically during installation. Footprint compatibility with SIM900/SIM800F lets city-infrastructure vendors refresh 2G-era deployments onto LTE LPWA without new PCB spins, shortening municipal procurement cycles significantly.
추천
Maker and Prototype IoT (Arduino/ESP32)
The SIM7000A is a popular cellular engine for maker platforms - DFRobot, Botletics, and Waveshare offer Arduino shields built around it - because AT commands are mostly compatible with the well-documented SIM800F, so existing tutorials and libraries transfer with minimal changes. A typical prototype connects the module's UART to an Arduino or ESP32, reports GNSS coordinates and sensor readings to cloud dashboards over Cat-M1, at much lower power than a smartphone-class 4G modem. The 2 A supply requirement means makers should use a robust 3.7 V Li-ion source with 1000 uF bulk capacitance per the user manual, not a weak USB port. For products later sold globally, pin-compatible migration to SIM7000G or SIM7070G preserves firmware investment.
추천
추천 제품 요약
엔지니어링 참조 데이터: SIM7000A — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | SIM7000E | SIM7000G | SIM7000X | SIM7070G |
|---|---|---|---|---|---|
| Package | LGA 24 x 24 mm | LGA 24 x 24 mm - same | LGA 24 x 24 mm - same | LGA 24 x 24 mm - same | LGA 24 x 24 mm - same |
| Brand | SIMCom | SIMCom | SIMCom | SIMCom | SIMCom |
| Radio Technology | LTE Cat-M1 / NB-IoT | LTE Cat-M1 / NB-IoT (EU bands) | LTE Cat-M1 / NB-IoT (global bands) | Multi-band Cat-M (eMTC) / NB-IoT | Cat-M / NB-IoT / 2G fallback |
| GNSS | Integrated multi-GNSS | Integrated GNSS | Integrated GNSS | Integrated GNSS | Integrated GNSS |
| Regional Target | North America | Europe | Global | Multi-region | Global |
| Footprint Compatibility | SIM900 / SIM800F compatible | SIM7000 family footprint | SIM7000 family footprint | SIM7000 family footprint | SIM7000 family footprint (verify pinout) |
| AT Command Compatibility | Mostly SIM800F compatible | Same family AT set | Same family AT set | Same family AT set | SIM7000-series AT set with extensions |
주요 차별점
- North American band optimization (vs SIM7000E)
- 2G-to-LTE migration without PCB redesign (vs SIM800F)
- Lower cost than newer generation (vs SIM7070G)
설계 노트
The VBAT supply is the single most critical design point. Per the SIM7000A User Manual (FCC ID 2AJYU-SIM7000A), the VBAT supply must support up to 2 A transmit burst current. If it can, use more than 300 uF total bulk capacitance; if it cannot, use approximately 1000 uF typically, to keep the VBAT drop under 300 mV during bursts. Place the bulk capacitors close to the VBAT pins and pair them with 100 nF ceramics for RF decoupling. A weak supply causes brownout resets that manifest as random AT command failures.
The 24 x 24 mm LGA footprint is compatible with SIM900 and SIM800F, which enables PCB reuse when migrating from 2G. When reusing an old SIM800F layout, audit the RF path: LTE Cat-M1/NB-IoT operate in different bands than GSM, so antenna matching and possibly the antenna itself must be re-tuned. Provide ground via stitching around the module keep-out, and follow the SIMCom hardware design guide for the exposed-pad grounding pattern to ensure RF and thermal performance.
Three common integration mistakes: (1) powering the module from a current-limited USB or bench supply without bulk capacitance, causing transmit-burst voltage collapse; (2) assuming full AT command identity with SIM800F - commands are mostly compatible, but LTE-specific commands (band selection, PSM/eDRX configuration) differ, so re-test the firmware command set; (3) selecting the wrong regional variant - the SIM7000A is tuned for North American Cat-M1/NB-IoT bands and will underperform in Europe or Asia, where SIM7000E/G should be used.
규정 준수 정보
RoHS compliance stated on JLCPCB part page (C126271). FCC certification exists under FCC ID 2AJYU-SIM7000A (User Manual V1.00 on file). Other compliance items not stated in provided data.
