SKM400GB12E4 - 400A 1200V Half-Bridge IGBT Module | Semikron Danfoss
부품 번호: SKM400GB12E4 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $245 | $245.00 |
| 10 | $232.75 | $2,327.50 |
| 100 | $220.5 | $22,050.00 |
| 500 | $208.25 | $104,125.00 |
| 1,000 | $196 | $196,000.00 |
SKM400GB12E4 개요
An IGBT power module is a semiconductor assembly that integrates insulated-gate bipolar transistors and their antiparallel freewheeling diodes onto a common isolated baseplate, forming the switching core of voltage regulators and motor-drive inverters within the broader power management hierarchy. Half-bridge topology is the fundamental building block of H-bridges, three-phase inverters, and buck/boost converters.
Key features include a collector-emitter voltage of 1200V, a nominal DC current of 400A, and pulsed collector current (ICRM) of 3x ICnom. The IGBT4 trench chipset provides VCEsat with a positive temperature coefficient, enabling straightforward paralleling of modules. The module offers high short-circuit capability with self-limiting at 6x ICnom, a critical ruggedness parameter for industrial drive environments.
Technically, the CAL4 diode exhibits soft-recovery switching behavior that reduces voltage overshoot during diode turn-off, lowering EMI and stress on companion switches. DBC ceramic insulation provides the isolation between silicon and baseplate required for 1200V-class designs, while the solder-bond construction targets high power cycling lifetime in traction and drive duty.
Typical applications include variable-frequency AC drives, wind power converters, uninterruptible power supplies, and electric traction inverters operating from DC bus voltages around 800V.
When designing, ensure gate drive is limited within the ±15V VGE window, size the heatsink for the VCEsat-related conduction losses, and observe the creepage/clearance of the SEMITRANS 3 housing.
This page synthesizes distributor sourcing data, verified drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.
드롭인 대체품: SKM400GB12E4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
SKM400GB124D
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SKM450GB12E4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SKM400GB12E4-M07
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AMM400GB12E4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SKM400GB12E4 최대 정격 & 전기적 특성
| 토폴로지 | Half Bridge (Dual IGBT) |
| Collector-Emitter Voltage VCES | 1200 V |
| Nominal DC Collector Current ICnom | 400 A |
| Repetitive Peak Collector Current ICRM | 3 x ICnom |
| DC Bus Voltage VCC (typical) | 800 V |
| Gate-Emitter Voltage VGE | 15 V |
| Polarity | N-Channel |
| Chipset Generation | IGBT4 (4th generation trench, medium fast) |
| Freewheeling Diode | CAL4 soft-switching 4th generation CAL diode |
| Substrate Technology | DBC (Direct Bonded Copper) |
| Short Circuit Capability | Self limiting, 6 x ICnom |
| VCEsat Temperature Coefficient | Positive (favorable for paralleling) |
| 패키지 | SEMITRANS 3 |
| 실장 유형 | Screw mount on baseplate |
| Manufacturer Part Number | SKM400GB12E4 (order code 22892087) |
SKM400GB12E4 semitrans 3 핀 구성 가이드
SKM400GB12E4(semitrans 3 패키지)의 핀 구성입니다. 이 전력 소자는 게이트, 드레인, 소스 단자를 갖추고 있습니다. 비편향 패키지의 경우 정확한 핀 1 방향과 풋프린트 세부 정보는 제조사 데이터시트를 참조하십시오. 일반적인 응용 분야로는 전원 공급 장치 설계, 모터 구동, 부하 스위칭이 있습니다.
다음에 대한 상세 핀아웃 데이터 없음: SKM400GB12E4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
SKM400GB12E4 적합 용도: 6 애플리케이션s: Variable Frequency Drives (VFD), Uninterruptible Power Supplies (UPS), Wind Power Converters, Electric Traction and Rail Auxiliary Converters, Industrial Welding and Induction Heating Power Supplies, Solar String and Central Inverters.
Variable Frequency Drives (VFD)
The SKM400GB12E4 fits variable-frequency AC drives up to roughly 150 kW-class power stages, where its 1200V VCES and 400A ICnom support 800V-class DC bus inverters driving induction or permanent-magnet motors. The half-bridge topology forms the fundamental U/V/W phase legs of a three-phase inverter, and the IGBT4 trench chipset reduces turn-off energy compared with earlier chip generations, improving inverter efficiency at typical 4-16 kHz PWM frequencies. The CAL4 freewheeling diodes provide soft recovery, which limits reverse-recovery overshoot across the DC-link and reduces conducted EMI in long motor cable installations. Designers should size the heatsink for combined conduction (VCEsat x IC) and switching losses and use dv/dt filtering for standard motor insulation limits.
추천
Uninterruptible Power Supplies (UPS)
In online double-conversion UPS systems, the SKM400GB12E4 serves both the AC/DC boost rectifier and the DC/AC inverter stages, where its 1200V rating withstands 800V-class battery and DC-link buses. The module's 3x ICnom repetitive peak current capability absorbs the transient overloads that occur during battery-mode transfer and short-duration overcurrent events specified in UPS duty. High short-circuit capability, self-limiting at 6x ICnom, gives the protection firmware time to detect and shut down a leg fault. The CAL4 diode's soft recovery limits ringing during inverter dead-time commutation, easing output-filter design for low-THD sine-wave output. Semi-selection: verify thermal resistance against continuous double-conversion duty and apply appropriate baseplate cooling.
추천
Wind Power Converters
The SKM400GB12E4 is used in partial-power converter stages of wind turbines, typically in the machine-side and grid-side bridges of medium-power (100-500 kW section) back-to-back converter strings. Its IGBT4 chipset with positive VCEsat temperature coefficient permits parallel connection of modules to build higher phase-leg current capability while keeping static current sharing balanced - a key requirement in wind converter racks. The DBC substrate and screw-terminal SEMITRANS 3 construction support the high power-cycling lifetimes demanded by 20-year turbine service. Wind applications also benefit from the self-limiting 6x ICnom short-circuit behavior during grid faults. Designers must validate against turbine-specific vibration, humidity, and coating requirements; the -M07 HP-PCM coated variant addresses polluted environments.
추천
Electric Traction and Rail Auxiliary Converters
Rail and industrial electric traction auxiliary converters (battery chargers, HVAC supplies, auxiliary inverters on DC 750V/900V bus networks) use the SKM400GB12E4 half-bridge as the chopper or inverter leg, since its 1200V VCES provides margin on nominal 750-800V catenary and battery buses. The 400A nominal current and 3x ICnom peak capability cover traction overload profiles, while the IGBT4 trench chipset improves converter efficiency, reducing heatsink mass - important in vehicle-mounted equipment. CAL4 soft diodes suppress turn-off voltage overshoot on inductive traction loads, aiding EMC compliance in rail environments. Semikron Danfoss explicitly requires prior consultation for safety-critical use; the standard and -M07 coated variants cover different pollution-degree requirements in traction installations.
추천
Industrial Welding and Induction Heating Power Supplies
High-current DC and switched power supplies for welding and induction heating use the SKM400GB12E4 in half-bridge or full-bridge configurations, exploiting its 400A continuous rating and 3x ICnom repetitive peak capability to handle the extreme load transients inherent in arc and melt processes. The IGBT4 medium-fast trench chipset supports the 10-30 kHz switching range typical of modern welding inverters, where it improves efficiency versus slower chip generations. Soft-recovery CAL4 diodes reduce snubber stress on the transformer-coupled bridge. The screw-terminal SEMITRANS 3 package withstands the high vibration and thermal cycling of workshop equipment. Thermal design must account for duty-cycle peak loads; baseplate temperature monitoring and fast overcurrent shutdown within the short-circuit withstand window are essential design practices.
추천
Solar String and Central Inverters
Photovoltaic string and central inverter power stages operate the SKM400GB12E4 as grid-side inverter legs or boost-chopper switches on 800V-class DC links derived from high-voltage PV arrays. The 1200V VCES and 400A ICnom allow three-phase inverter designs in the 100 kW power class per phase-leg set. The IGBT4 chipset's reduced turn-off energy raises conversion efficiency at grid-frequency and low-kHz PWM, directly improving inverter weighted-efficiency metrics (EU efficiency, CEC efficiency). The positive VCEsat temperature coefficient supports module paralleling for central inverter racks. CAL4 soft diodes limit reverse-recovery loss in boost stages where the diode conducts between switching cycles. Designers should validate insulation coordination and creepage for the 1000-1100V maximum system voltages of modern PV plants.
추천
추천 제품 요약
엔지니어링 참조 데이터: SKM400GB12E4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | SKM400GB124D | SKM450GB12E4 | SKM400GB12E4-M07 | AMM400GB12E4 |
|---|---|---|---|---|---|
| Package | SEMITRANS 3 | SEMITRANS 3 - same | SEMITRANS 3 - same | SEMITRANS 3 - same | SEMITRANS 3 - same |
| Brand | Semikron Danfoss | Semikron Danfoss | Semikron Danfoss | Semikron Danfoss | Semikron Danfoss (listed analog) |
| VCES | 1200 V | 1200 V | 1200 V | 1200 V | 1200 V |
| Nominal Current ICnom | 400 A | 400 A | 450 A | 400 A | 400 A |
| Chipset Generation | IGBT4 trench (E4) | D-series (older) | IGBT4 trench (E4) | IGBT4 trench (E4) | IGBT4 (per analog listing) |
| Environmental Coating | Standard | Standard | Standard | HP-PCM coating (humid/polluted) | Standard |
주요 차별점
- 4th-generation IGBT4 trench chipset (vs SKM400GB124D)
- Higher current rating in same outline (vs SKM400GB12E4)
- Positive VCEsat temperature coefficient (vs SKM400GB124D)
설계 노트
Estimated: conduction loss per switch at ICnom is roughly VCEsat x 400A; with a typical IGBT4 VCEsat near 1.8V (verify exact value in datasheet), that is ~720W per switch at full load. Combined with switching losses at your PWM frequency, total module dissipation can reach 1.5-2 kW, requiring a substantial heatsink or liquid cold plate under the SEMITRANS 3 baseplate. Use the datasheet thermal resistance junction-to-heatsink and your duty profile to compute junction temperature; keep Tj well below the absolute maximum for power-cycling lifetime.
Keep the DC-link decoupling loop between the module DC terminals and the snubber/DC-link capacitors as tight as possible to minimize stray inductance; high di/dt from the CAL4 diode recovery and IGBT turn-off across busbar inductance produces VCE overshoot (VCE = VDC + Lstray x di/dt) that erodes the 1200V margin. Use laminated busbars, symmetric AC terminal layout, and place gate drivers as close as possible with twisted-pair or coaxial gate-emitter connections and Kelvin emitter return.
Do not exceed the ±15V VGE window - overvoltage on the gate punctures the gate oxide, while insufficient on-state gate voltage raises VCEsat and conduction losses dramatically. Observe the short-circuit withstand window: with self-limiting at 6x ICnom, the gate driver must detect desaturation and shut down within the datasheet short-circuit time. Semikron Danfoss notes that component specifications are not an assurance of characteristics for every application - validate in-circuit and consult Semikron for life-support or safety-critical use.
Although this module is screw-terminal wired rather than PCB-mounted, the gate-drive PCB should include individual gate resistors (split turn-on/turn-off networks), desaturation detection with a soft turn-off stage, and active Miller clamp or negative gate bias to prevent parasitic turn-on during the fast dv/dt of the complementary switch. Match gate loop inductance between paralleled modules if you stack units for higher current.
규정 준수 정보
Compliance data not present in verified web data; consult Semikron Danfoss product page (order code 22892087) for RoHS/REACH declarations.
