STM32F042K4U6 - 48MHz 16KB USB/CAN MCU | STMicroelectronics
부품 번호: STM32F042K4U6 ✓ 활성STM32F042K4U6 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32F0 series belongs to the hierarchy of embedded microcontroller ICs, system-on-chip devices, and programmable control components. The STM32F042K4U6 uses the ARM Cortex-M0 RISC core, which executes 32-bit instructions while keeping the device suitable for cost-sensitive, low-power embedded designs.
The STM32F042K4U6 combines a 48 MHz clock with 16 KB of programmable Flash for firmware. Its communication features include USB and CAN, while the 2.5 V or 3.3 V operating range supports common embedded supply rails. The 32-pin UFQFPN package has a 5 mm by 5 mm body, allowing the device to provide USB, CAN, and general-purpose control functions without requiring a larger high-pin-count package.
The ARM Cortex-M0 architecture is designed around a compact instruction set and an interrupt-driven embedded-control model. Firmware can use the STM32 programming ecosystem and peripheral peripherals to manage USB device communication, CAN frames, timers, serial interfaces, and digital inputs and outputs. Exact RAM content, peripheral counts, GPIO count, and electrical limits must be confirmed in the manufacturer datasheet before finalizing the board design.
Typical applications include USB-connected industrial accessories, CAN-based monitoring modules, compact data-acquisition controllers, USB-to-CAN interface equipment, and cost-sensitive embedded products. USB is useful for direct host connectivity, while CAN supports robust communication between distributed industrial nodes. The 48 MHz processing rate provides useful timing margin for protocol handling and control tasks in compact assemblies.
PCB design should preserve the compact 5 mm by 5 mm footprint and route USB and CAN interfaces according to the manufacturer reference layout. Decoupling, grounding, exposed-pad thermal management, and signal-routing discipline are essential for reliable operation. Firmware and peripheral configurations should also be checked against the exact ordering code because similarly named STM32F0 devices can differ in memory and feature sets.
드롭인 대체품: STM32F042K4U6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F042K4U6 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Package, Product Type, Processor Core, CAN Interface.
STM32F042K4U7
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32F051K8U6
✅ 드롭인가격 문의
데이터시트 보기 →STM32F051K8U7TR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F042K4U6 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| Processor Architecture | ARM Cortex-M0, 32-bit RISC |
| 동작 공급 전압 | 2.5 V or 3.3 V |
| 패키지 | 32-pin UFQFPN |
| Package Body Size | 5 mm x 5 mm |
| 실장 유형 | Surface mount |
| USB Interface | Yes |
| CAN Interface | Yes |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
STM32F042K4U6 5 mm x 5 mm 핀 구성 가이드
STM32F042K4U6(5 mm x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F042K4U6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F042K4U6 적합 용도: 6 애플리케이션s: USB-to-CAN Interface Module, Industrial CAN Monitoring Node, USB Desktop Control Accessory, USB Human-Interface Adapter, Compact Data-Acquisition Controller, Cost-Sensitive Embedded Control Board.
USB-to-CAN Interface Module
The STM32F042K4U6 fits a USB-to-CAN interface because its 48 MHz ARM Cortex-M0 core can handle USB traffic, CAN frame processing, and protocol conversion within one compact controller. Its 16 KB of Flash provides space for a focused USB and CAN firmware stack, while USB and CAN are both identified as native device features. The 32-pin UFQFPN has a 5 mm by 5 mm body, helping reduce the size of a portable interface module. The design trade-off is the relatively small 16 KB firmware budget, so protocol code should be compiled efficiently and the final binary size checked against the device limit.
추천
Industrial CAN Monitoring Node
The STM32F042K4U6 is appropriate for a compact industrial monitoring node that connects sensors or equipment to a CAN network while exposing configuration or diagnostics through USB. Its ARM Cortex-M0 core operates up to 48 MHz, providing processing margin for message handling, filtering, logging, and control tasks, and its USB support simplifies host-side configuration. The 2.5 V or 3.3 V operating range aligns with common embedded rails. Engineers should keep CAN routing short, maintain a continuous return path, and review the device-specific transceiver, termination, isolation, and transient-protection requirements in the reference design.
추천
USB Desktop Control Accessory
A USB desktop control accessory can use the STM32F042K4U6 to combine host connectivity with embedded control functions in a small enclosure. The 48 MHz Cortex-M0 processor handles USB enumeration and command processing, while 16 KB of Flash accommodates a purpose-built firmware image. Its 32-pin UFQFPN footprint is only 5 mm by 5 mm, which helps when the product must fit behind a panel or into a compact peripheral. Because 16 KB is a modest code budget, the design should omit unused peripheral initialization and use a compact boot sequence when validating firmware size and startup behavior.
추천
USB Human-Interface Adapter
The STM32F042K4U6 suits a USB human-interface adapter that translates host commands into embedded control signals. Its 48 MHz ARM Cortex-M0 core can service USB interrupts and real-time control tasks, while the available 16 KB of Flash favors a narrowly defined adapter role rather than a large graphical application. The compact 5 mm by 5 mm UFQFPN package leaves board area for connectors and protection components. Firmware should use interrupt-driven USB handling, and the PCB should separate high-current or externally accessible connector paths from sensitive signal routing.
추천
Compact Data-Acquisition Controller
The STM32F042K4U6 can serve as a compact data-acquisition controller when the system needs USB export, CAN distribution, and local digital control in one device. The 48 MHz Cortex-M0 core provides sufficient clock rate for sampling coordination, buffering, and communication tasks, while USB provides a straightforward connection to a host computer. The device operates from 2.5 V or 3.3 V and occupies a compact 32-pin UFQFPN footprint. A practical trade-off is the limited 16 KB Flash capacity, so acquisition code, USB descriptors, and calibration data must be selected with the total firmware image in mind.
추천
Cost-Sensitive Embedded Control Board
The STM32F042K4U6 fits cost-sensitive embedded control boards that need modern 32-bit processing without a large package or high clock complexity. Its ARM Cortex-M0 core runs up to 48 MHz, its 16 KB of Flash supports focused control firmware, and the 32-pin UFQFPN reduces board area compared with many higher-pin-count MCUs. USB and CAN provide optional growth paths for configuration or networked equipment. The design should reserve the exposed-pad connection and decoupling according to the manufacturer layout, while firmware partitioning and peripheral assignments should be checked against the exact STM32F042 device variant before production.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F042K4U6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32F042K4U7 | STM32F051K8U6 | STM32F051K8U7TR |
|---|---|---|---|---|
| Package | 32-UFQFPN (5x5) | 32-UFQFPN (5x5) | 32-UFQFPN (5x5) | 32-UFQFPN (5x5) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC | ARM Cortex-M0, 32-bit RISC |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 16 KB | 16 KB | 64 KB | 64 KB |
| Flash Organization | 16K x 8 bits | 16K x 8 bits | 64K x 8 bits | 64K x 8 bits |
| USB Interface | Yes | Yes | Not specified | Not specified |
| CAN Interface | Yes | Yes | Not specified | Not specified |
| Operating Supply Voltage | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
주요 차별점
- Combines USB and CAN with a compact 48 MHz controller (vs STM32F051K8U6)
- Lower Flash capacity supports a clearly bounded firmware budget (vs STM32F051K8U6)
- Near-identical family alternative for temperature-grade selection (vs STM32F042K4U7)
설계 노트
Follow the manufacturer land pattern for the 32-pin UFQFPN rather than creating a footprint from package dimensions alone. Pay particular attention to exposed-pad size, pad placement, solder-mask definition, and the pad's electrical connection. Place the required local bypass capacitors close to their associated supply pins and use a continuous ground reference beneath the device to reduce inductance and improve return-path integrity.
Keep USB and CAN routing short and controlled. USB differential pairs should remain length-matched and routed over a continuous reference plane, while CAN conductors should have appropriate termination and a continuous ground reference. Avoid routing communications through areas adjacent to switching supplies or high-current LED drivers. Keep connector protection and isolation components close to the board edge to minimize the distance over which transient energy can propagate.
Design the 2.5 V or 3.3 V supply path for both steady-state and transient demands, including startup current for USB-connected operation. Use the manufacturer recommendations for bypass capacitance, power sequencing, and exposed-pad connection. Validate brownout behavior during USB attachment and removal, and ensure the supply remains within the electrical limits stated for the exact device and operating-temperature grade before releasing the design.
Do not select a replacement solely because it uses a 32-pin UFQFPN package. The STM32F042K4U6 has 16 KB of Flash, while the STM32F051K8U6 and STM32F051K8U7TR are identified with 64 KB, and family differences may affect peripherals, pin assignments, startup, and firmware. Verify the pin-description table, electrical characteristics, boot behavior, and firmware configuration before approving any substitution.
규정 준수 정보
Regulatory and environmental declarations must be confirmed for the exact STM32F042K4U6 ordering code in current STMicroelectronics documentation.