STM32F410R8T6 - 100MHz Cortex-M4 64KB MCU | STMicroelectronics
부품 번호: STM32F410R8T6 ✓ 활성STM32F410R8T6 개요
The STM32F4 family is a group of 32-bit microcontrollers in the broader semiconductor and embedded-processing hierarchy. The STM32F410 line is positioned as an entry-level member of the STM32F4 series and is designed for medical, industrial, and consumer applications that require balanced performance, power efficiency, integration, and compact packaging. This particular device combines an Arm Cortex-M4 processor with embedded Flash and SRAM and operates from a single low-voltage supply.
Verified product information identifies a maximum operating frequency of 100 MHz, 64 KB of Flash memory, and a 64-LQFP package. The Cortex-M4 architecture provides 32-bit processing and floating-point-oriented embedded control capability when the FPU is enabled. Integrated on-chip memory reduces external component count, while the 10 mm by 10 mm LQFP package provides exposed leads that can be inspected and assembled using conventional manufacturing processes.
The STM32F410R8T6 is designed for applications that need a compact general-purpose controller rather than a large system-on-module. Its Arm Cortex-M4 core can support responsive control logic, serial communications, data acquisition, and supervisory functions. The 100 MHz operating limit provides additional performance headroom over lower-frequency entry-level microcontrollers, although final firmware timing must be validated against clock, peripheral, and memory-access requirements.
Typical uses include industrial sensor hubs, medical monitoring instruments, consumer controls, embedded measurement equipment, and low-cost connected products. The 64 KB Flash configuration is appropriate for compact firmware, while the 32 KB SRAM supports working buffers, protocol stacks, and intermediate calculations. An STM32F410-family microcontroller in a 64-pin package is particularly useful when a design needs more peripheral options than smaller packages provide while retaining conventional leaded-package assembly.
When designing a board around the STM32F410R8T6, preserve the exact pin multiplexing, power, ground, clock, and debug requirements from the manufacturer documentation for the selected ordering code. Because the supplied web results identify the package and core but do not provide a complete verified pin table, engineers should confirm all 64 connections, exposed programming interfaces, supply requirements, decoupling values, and unused-pin treatment against the official STM32F410 documentation before release.
This product page consolidates the verified 100 MHz Cortex-M4, 64 KB Flash, 32 KB RAM, and LQFP-64 characteristics with distributor pricing, source links, practical application guidance, and same-package replacement candidates. It also distinguishes basic PCB compatibility from complete firmware, peripheral, qualification, and lifecycle equivalence, helping engineers make an evidence-based sourcing decision.
드롭인 대체품: STM32F410R8T6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
STM32F411R8T6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F407R8T6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F413R8T6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F411RCT6TR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F412RGT6TR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F410R8T6 최대 정격 & 전기적 특성
| Product Type | 32-bit Arm Cortex-M4 microcontroller |
| Processor Core | Arm Cortex-M4 32-bit RISC core |
| Maximum CPU Frequency | 100 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| RAM Memory | 32 KB |
| Architecture | 32-bit |
| 패키지 | 64-LQFP |
| Package Dimensions | 10 mm x 10 mm |
| 실장 유형 | Surface Mount |
| Lead Count | 64 leads |
| Series | STM32F4 |
| Product Line | STM32F410 entry-level STM32F4 series |
| Target Applications | Medical, industrial, and consumer applications |
| RoHS 상태 | Compliant |
STM32F410R8T6 10 mm x 10 mm 핀 구성 가이드
STM32F410R8T6(10 mm x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F410R8T6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F410R8T6 적합 용도: 6 애플리케이션s: Industrial Sensor Hub, Medical Monitoring Instrument, Consumer Control Module, Compact Data-Acquisition Unit, Connected Embedded Controller, Low-Power Condition Monitor.
Industrial Sensor Hub
The STM32F410R8T6 fits an industrial sensor hub because its 100 MHz Arm Cortex-M4 core provides responsive control and data-processing performance while 64 KB of Flash and 32 KB of RAM support embedded firmware and local buffering. Its 64-LQFP package offers 64 externally accessible leads for power, communications, sensors, and control signals. A typical implementation places the MCU between sensor interfaces and an industrial network transceiver, using timers for periodic sampling and serial peripherals for data transfer. The benefit is integration without external Flash or SRAM, although supply-voltage limits, EMC requirements, operating temperature, and isolation must be confirmed from the official electrical documentation before field deployment.
추천
Medical Monitoring Instrument
The STM32F410R8T6 is a candidate for a compact medical monitoring instrument that combines sensing, control, and local communication in one controller. The 100 MHz Cortex-M4 core can execute acquisition sequencing and signal-processing tasks, while 64 KB of Flash stores firmware and 32 KB of RAM provides working memory for buffers and control state. Its 10 mm by 10 mm 64-LQFP package can simplify assembly in medical equipment that values conventional leaded packages and inspection. For actual medical use, the manufacturer electrical limits, application risk assessment, electrical-safety requirements, and validation process remain essential because the MCU qualification alone does not approve the finished device.
추천
Consumer Control Module
The STM32F410R8T6 supports a compact consumer control module that coordinates buttons, indicators, sensors, and communications in a cost-sensitive product. Its 64 KB of embedded Flash is suitable for moderate firmware size, and 32 KB of RAM can accommodate task state, protocol buffers, and display or keypad handling. The 100 MHz core provides timing margin for responsive user-interface logic, while the 64-LQFP package provides enough pins for multiple digital functions without an external package. Compared with a larger microcontroller, the STM32F410 approach integrates more processing and memory near the controls. Firmware should still provide brownout handling, watchdog strategy, ESD protection, and safe behavior for unresolved peripheral states.
추천
Compact Data-Acquisition Unit
The STM32F410R8T6 is well suited to a compact data-acquisition unit that must sample sensors, perform calculations, and transfer results through an embedded interface. A 100 MHz Arm Cortex-M4 core can coordinate timers, DMA, and serial data paths, while the 32 KB RAM supports intermediate samples and protocol state. With 64 KB of Flash, the device can hold a dedicated acquisition application without requiring an external memory chip in moderate-complexity designs. The 64-LQFP package makes the controller practical for medium-complexity boards with several signals and grounding requirements. Exact ADC resolution, conversion rate, timer channels, and supply limits are not present in the supplied verified data and must be checked before selecting the device for a precision measurement design.
추천
Connected Embedded Controller
The STM32F410R8T6 can serve as the host controller beneath a wireless or wired communication module in a connected embedded product. Its 100 MHz Cortex-M4 core can manage protocol processing, state machines, diagnostics, and application logic, while 64 KB of Flash and 32 KB of RAM avoid forcing immediate use of external memory for modest workloads. The 64-pin LQFP package provides a practical number of signals for a communications controller, local sensors, status indicators, and programming. This arrangement can lower board complexity by integrating the embedded control function next to the communications device. RF layout remains the responsibility of the communications module, and the design must isolate noisy or high-current sections according to the complete system architecture.
추천
Low-Power Condition Monitor
The STM32F410R8T6 is a candidate for a low-power condition monitor that periodically reads sensors, evaluates thresholds, and records or reports unusual events. Its integrated 64 KB Flash and 32 KB RAM allow the monitoring application, working state, and event buffers to remain on-chip, reducing external component demand. The 100 MHz Cortex-M4 core supplies sufficient control headroom while the microcontroller can use low-power operating modes between measurements. A 64-LQFP package offers useful pin access for sensors and communications while supporting conventional SMT assembly. Actual standby-current consumption, wake-up timing, ADC performance, and supply range are not quantified in the supplied results, so battery-life estimates require the official STM32F410 electrical characteristics and a representative workload measurement.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F410R8T6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32F411R8T6 | STM32F407R8T6 | STM32F413R8T6 | STM32F411RCT6TR | STM32F412RGT6TR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP |
| Processor Core | Arm Cortex-M4 32-bit RISC | Arm Cortex-M4 family | Arm Cortex-M4 family | Arm Cortex-M4 family | Arm Cortex-M4 family | Arm Cortex-M4 family |
| Maximum CPU Frequency | 100 MHz | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data |
| Flash Memory | 64 KB | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data |
| RAM Memory | 32 KB | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data | Not specified in supplied cross-reference data |
| Architecture | 32-bit | Arm Cortex-M4 family | Arm Cortex-M4 family | Arm Cortex-M4 family | Arm Cortex-M4 family | Arm Cortex-M4 family |
| Series | STM32F410 | STM32F411 | STM32F407 | STM32F413 | STM32F411 | STM32F412 |
| Product Positioning | Entry-level STM32F4 series for medical, industrial, and consumer applications | STM32F4 family | STM32F4 family | STM32F4 family | STM32F4 family | STM32F4 family |
주요 차별점
- Verified balanced embedded memory configuration (vs STM32F411R8T6)
- Documented 100 MHz operating ceiling (vs STM32F407R8T6)
- Entry-level STM32F4 positioning with 64-LQFP integration (vs STM32F413R8T6)
설계 노트
Design the PCB around the exact STM32F410R8 ordering code rather than a generic STM32F410 symbol. The verified package is a 64-LQFP measuring 10 mm by 10 mm, but the supplied results do not include a complete numbered pin table. Before routing power, clocks, serial interfaces, and debug signals, verify every pin name and alternate function in the official STM32F410 documentation. Include accessible test points for SWD programming and recovery so production programming and fault diagnosis remain practical.
Do not select capacitors, regulators, or power budgets from the CPU frequency alone. The supplied data confirms a 100 MHz Cortex-M4 core but does not provide the operating-voltage range, active current, or low-power current. Use the official electrical characteristics to identify all supply rails, estimate worst-case core and peripheral consumption, and allow startup and transient margin. Place local high-frequency bypass capacitors directly beside the relevant supply and ground pins, and keep sensitive analog or measurement paths physically separate from switching and digital return currents.
Route the oscillator and sensitive analog signals using short, controlled paths and a continuous ground reference. The 100 MHz operating ceiling makes trace propagation and clock distribution relevant even though the MCU itself is not a high-speed communications device. Avoid routing clocks and debug signals adjacent to noisy analog inputs or switching-node copper. Decouple supply pins individually where the official layout guidance calls for it, and use a solid ground plane without disruptive splits unless the complete system architecture requires a deliberate partition.
Do not treat the listed STM32F411, STM32F407, STM32F413, and STM32F412 candidates as automatic software-compatible replacements. Same-package assembly establishes only a mechanical starting point. Before substitution, compare boot configuration, oscillator limits, Flash and RAM sizes, pin multiplexing, timer and serial resources, interrupts, DMA channels, low-power behavior, and peripheral electrical limits. For a production second source, compile and run the existing firmware on the alternate device and verify boundary conditions with the complete test suite.
규정 준수 정보
The supplied PartGenie result identifies the part as RoHS compliant and provides a dash for REACH information. No verified AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was supplied. The STM32F410 family page describes medical, industrial, and consumer applications, but product qualification and regulatory suitability must be assessed separately for each finished application.
