STM32G071C8T6 - 64MHz Cortex-M0+ MCU, 64KB Flash | STMicroelectronics
부품 번호: STM32G071C8T6 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.997 | $5.00 |
| 10 | $4.5 | $45.00 |
| 100 | $3.8 | $380.00 |
| 500 | $3.2 | $1,600.00 |
| 1,000 | $2.8 | $2,800.00 |
STM32G071C8T6 개요
A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and RAM), and programmable input/output peripherals on a single chip. The STM32G0 series sits within the broader STM32 family, which is a leading 32-bit ARM Cortex-M microcontroller platform. As a Cortex-M0+ device, it offers a balance of low power consumption, cost-effectiveness, and sufficient performance for many control and sensing applications, making it a popular choice in industrial, consumer, and IoT designs.
Key features of the STM32G071C8T6 include a 64 MHz Arm Cortex-M0+ core, 64 KB Flash, 36 KB SRAM, and a rich set of peripherals: multiple USARTs, I2C, SPI, a 12-bit ADC with hardware oversampling, a 12-bit DAC, comparators, op-amps, and a touch sensing controller. It also integrates a high-resolution timer, general-purpose timers, and a low-power RTC. The device supports a supply voltage range of 2.0V to 3.6V, with an operating temperature range of -40°C to +85°C, making it suitable for industrial environments.
Technically, the STM32G071C8T6 is built on a high-performance Arm Cortex-M0+ core with a single-cycle multiplier and a nested vectored interrupt controller (NVIC). It includes a memory protection unit (MPU) for enhanced safety, and a DMA controller for efficient data transfer. The MCU also features a 12-bit ADC with up to 16 external channels, a 12-bit DAC, and two operational amplifiers, enabling analog signal conditioning without external components. The device supports various low-power modes, including Sleep, Stop, and Standby, with a typical power consumption in Stop mode of around 2.5 µA, which is critical for battery-powered applications.
Typical applications include industrial control systems, home automation, sensor hubs, motor control, and portable medical devices. The rich analog peripherals and multiple communication interfaces make it ideal for building compact, cost-effective embedded systems. For example, in a smart sensor node, the STM32G071C8T6 can read analog sensors via its ADC, process data with its Cortex-M0+ core, and transmit results over UART or I2C to a gateway.
When designing with this MCU, ensure proper decoupling of the VDD pins with 100 nF capacitors placed close to the device, and a bulk capacitor (e.g., 4.7 µF) on the main supply. For ADC accuracy, a clean analog supply (VDDA) and a stable reference voltage (VREF+) are essential. The device supports in-application programming (IAP) via its bootloader, allowing firmware updates over UART or USB, which is valuable for field maintenance.
드롭인 대체품: STM32G071C8T6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32G071C8T6 (동일 폼 팩터 및 풋프린트) — 차이점: Core, SRAM, Timers.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STM32G071C8T6NTR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32G071C8T6TR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6N
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6
✅ 드롭인✓ 재고 있음
$2.8 / 개
데이터시트 보기 →STM32G071C8T6 최대 정격 & 전기적 특성
| Core | Arm Cortex-M0+ |
| 최대 클록 주파수 | 64 MHz |
| Flash Memory | 64 KB |
| SRAM | 36 KB |
| Supply Voltage Range | 2.0 V to 3.6 V |
| 동작 온도 범위 | -40°C to +85°C |
| 패키지 | 48-LQFP (7x7 mm) |
| 실장 유형 | Surface Mount |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| Communication Interfaces | USART, I2C, SPI |
| Timers | Advanced, general-purpose, basic |
| Low Power Modes | Sleep, Stop, Standby |
| RoHS 상태 | Compliant |
STM32G071C8T6 핀 구성
| 핀 1 | VBAT — Battery backup supply |
| 핀 2 | PC13 — GPIO / RTC output |
| 핀 3 | PC14 — GPIO / OSC32_IN |
| 핀 4 | PC15 — GPIO / OSC32_OUT |
| 핀 5 | PF0 — GPIO / OSC_IN |
| 핀 6 | PF1 — GPIO / OSC_OUT |
| 핀 7 | NRST — Reset (active low) |
| 핀 8 | VDD — Digital power supply |
| 핀 9 | VSS — Ground |
| 핀 10 | PA0 — GPIO / ADC_IN0 |
| 핀 11 | PA1 — GPIO / ADC_IN1 |
| 핀 12 | PA2 — GPIO / USART2_TX |
| 핀 13 | PA3 — GPIO / USART2_RX |
| 핀 14 | PA4 — GPIO / DAC_OUT1 |
| 핀 15 | PA5 — GPIO / DAC_OUT2 |
| 핀 16 | PA6 — GPIO / SPI1_MISO |
| 핀 17 | PA7 — GPIO / SPI1_MOSI |
| 핀 18 | PB0 — GPIO / ADC_IN8 |
| 핀 19 | PB1 — GPIO / ADC_IN9 |
| 핀 20 | PB2 — GPIO / BOOT1 |
| 핀 21 | PB10 — GPIO / I2C2_SCL |
| 핀 22 | PB11 — GPIO / I2C2_SDA |
| 핀 23 | PB12 — GPIO / SPI2_NSS |
| 핀 24 | PB13 — GPIO / SPI2_SCK |
| 핀 25 | PB14 — GPIO / SPI2_MISO |
| 핀 26 | PB15 — GPIO / SPI2_MOSI |
| 핀 27 | PA8 — GPIO / MCO |
| 핀 28 | PA9 — GPIO / USART1_TX |
| 핀 29 | PA10 — GPIO / USART1_RX |
| 핀 30 | PA11 — GPIO / USB_DM |
| 핀 31 | PA12 — GPIO / USB_DP |
| 핀 32 | PA13 — GPIO / SWDIO |
| 핀 33 | PA14 — GPIO / SWCLK |
| 핀 34 | PA15 — GPIO / JTDI |
| 핀 35 | PB3 — GPIO / JTDO |
| 핀 36 | PB4 — GPIO / NJTRST |
| 핀 37 | PB5 — GPIO / I2C1_SMBA |
| 핀 38 | PB6 — GPIO / I2C1_SCL |
| 핀 39 | PB7 — GPIO / I2C1_SDA |
| 핀 40 | PB8 — GPIO / CAN_RX |
| 핀 41 | PB9 — GPIO / CAN_TX |
| 핀 42 | VDD — Digital power supply |
| 핀 43 | VSS — Ground |
| 핀 44 | VDDA — Analog power supply |
| 핀 45 | VREF+ — ADC reference voltage |
| 핀 46 | PC0 — GPIO / ADC_IN10 |
| 핀 47 | PC1 — GPIO / ADC_IN11 |
| 핀 48 | PC2 — GPIO / ADC_IN12 |
일반적인 애플리케이션
STM32G071C8T6 적합 용도: 6 애플리케이션s: Industrial Control, Home Automation, Sensor Hub, Motor Control, Portable Medical Devices, IoT Edge Node.
Industrial Control
The STM32G071C8T6 is well-suited for industrial control systems due to its 64 MHz Cortex-M0+ core, rich analog peripherals (12-bit ADC, DAC, comparators, op-amps), and multiple communication interfaces (USART, I2C, SPI). In a typical PLC or motor controller, the MCU reads sensor inputs via the ADC, processes control algorithms, and drives actuators via PWM timers. The wide operating temperature range (-40°C to +85°C) ensures reliable operation in factory environments. The device's low-power modes help reduce energy consumption in always-on monitoring applications. Compared to higher-end Cortex-M4 MCUs, the M0+ core offers sufficient performance for most control loops while minimizing cost and power. Designers should ensure proper decoupling and consider using the internal op-amps for signal conditioning to reduce external component count.
추천
Home Automation
In home automation, the STM32G071C8T6 serves as a central hub or node controller, managing sensors, actuators, and communication protocols. Its multiple USART/I2C/SPI interfaces allow connection to Zigbee, Z-Wave, or Wi-Fi modules, while the 12-bit ADC reads analog sensors like temperature, humidity, and light. The low-power Stop mode (around 2.5 µA) is critical for battery-powered devices such as smart thermostats and door sensors. The touch sensing controller enables capacitive touch buttons for user interfaces. The MCU's 64 KB Flash is sufficient for firmware implementing protocol stacks and local automation rules. For wireless connectivity, pairing with an ESP8266 or similar module via UART is common. Designers should optimize power consumption by using the RTC for periodic wake-ups and disabling unused peripherals.
추천
Sensor Hub
The STM32G071C8T6 is ideal for sensor hub applications, aggregating data from multiple sensors and forwarding it to a central processor or cloud. Its 12-bit ADC with hardware oversampling provides high-resolution measurements, while the DMA controller enables efficient data transfer without CPU intervention. The device supports multiple communication protocols, allowing connection to I2C sensors (e.g., accelerometers, gyroscopes) and SPI sensors (e.g., pressure, magnetometer). The 36 KB SRAM provides ample buffering for sensor data. In a wearable device, the MCU can process sensor fusion algorithms on the Cortex-M0+ core, reducing the load on the main application processor. The low-power modes extend battery life, making it suitable for continuous monitoring. Designers should carefully manage the ADC sampling rate and use the built-in oversampling to improve noise performance.
추천
Motor Control
The STM32G071C8T6 is well-equipped for motor control applications, featuring advanced timers for PWM generation, a 12-bit ADC for current sensing, and multiple communication interfaces for encoder feedback. In a brushless DC (BLDC) motor controller, the MCU generates six-step commutation signals using its timers, reads phase currents via the ADC, and implements speed control loops. The Cortex-M0+ core at 64 MHz provides sufficient processing power for field-oriented control (FOC) at moderate switching frequencies. The device's op-amps can be used for current sensing amplification, reducing external components. The wide operating temperature range and robust peripherals make it suitable for industrial motor drives. Designers should ensure proper isolation between power and control stages and use the ADC's sample-and-hold for accurate current measurement.
추천
Portable Medical Devices
The STM32G071C8T6 is suitable for portable medical devices such as glucose meters, pulse oximeters, and blood pressure monitors. Its low-power modes and wide supply voltage range (2.0V-3.6V) allow operation from a single lithium battery. The 12-bit ADC is essential for reading biosignals from sensors, while the DAC can generate analog outputs for calibration or stimulation. The device's small 48-pin LQFP package enables compact PCB designs. The Cortex-M0+ core efficiently runs signal processing algorithms, such as filtering and peak detection. The multiple communication interfaces allow data transfer to a smartphone via BLE module. Designers should prioritize low-power design by using the Stop mode between measurements and optimizing the ADC sampling rate. Compliance with medical standards (e.g., IEC 60601) should be considered in the overall system design.
추천
IoT Edge Node
The STM32G071C8T6 is an excellent choice for IoT edge nodes, providing local processing, sensor interfacing, and connectivity. Its multiple communication interfaces allow connection to various wireless modules (Wi-Fi, BLE, LoRa) via UART or SPI. The 12-bit ADC reads environmental sensors, and the DMA controller enables efficient data streaming. The device's low-power modes are crucial for battery-powered nodes, with Stop mode drawing around 2.5 µA. The 64 KB Flash can store firmware for MQTT or CoAP protocols, enabling direct cloud communication. The Cortex-M0+ core can handle basic edge analytics, reducing data transmission to the cloud. Designers should implement efficient power management, using the RTC for scheduled wake-ups and disabling peripherals when idle. The wide operating temperature range supports outdoor deployments.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32G071C8T6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32G071C8T6NTR | STM32G071C8T6TR | STM32G071C8T6N |
|---|---|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Max Clock Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 36 KB | 36 KB | 36 KB | 36 KB |
| Supply Voltage Range | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
주요 차별점
- Rich analog peripherals in a mainstream MCU (vs STM32G071KBU7TR)
- Larger package with more I/Os (vs STM32G071KBU7TR)
- Industrial temperature range (vs STM32G071C8T6 (commercial))
설계 노트
Ensure proper decoupling of the VDD pins with 100 nF capacitors placed as close as possible to the MCU, and a bulk capacitor (e.g., 4.7 µF) on the main supply. For the analog supply (VDDA), use a separate 100 nF capacitor and, if possible, a ferrite bead to isolate from digital noise. The VREF+ pin should be connected to a stable reference voltage for accurate ADC readings.
For the 48-pin LQFP package, ensure adequate copper pour for the ground pins to minimize inductance. Place the crystal oscillator (if used) close to the OSC_IN/OSC_OUT pins with proper load capacitors. Keep high-speed communication lines (SPI, USART) short and avoid routing them near the analog section to reduce crosstalk.
Do not exceed the absolute maximum ratings for VDD (3.6V) and VDDA. Ensure the NRST pin is properly pulled up with a 100 nF capacitor to ground for reliable reset. When using the ADC, avoid floating input pins by configuring them as analog inputs and connecting to a known potential. For low-power modes, disable unused peripherals and clocks to achieve the specified current consumption.
규정 준수 정보
RoHS compliance is indicated by STMicroelectronics product page. AEC-Q100 qualification is not specified for this part; it is intended for general-purpose applications.
