STM32L031K6T6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
부품 번호: STM32L031K6T6 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.85 | $2.85 |
| 10 | $2.56 | $25.60 |
| 100 | $2.28 | $228.00 |
| 500 | $2.05 | $1,025.00 |
| 1,000 | $1.82 | $1,820.00 |
STM32L031K6T6 개요
What is an ultra-low-power microcontroller? An ultra-low-power microcontroller is a system-on-chip that integrates a processor core, memory, and peripherals while minimizing energy consumption, often featuring multiple low-power modes such as sleep, stop, and standby. These devices are essential in the hierarchy of embedded systems, from simple 8-bit MCUs to complex application processors, where power efficiency is critical for extending battery life in portable and IoT devices.
Key features include a 12-bit ADC with hardware oversampling, multiple communication interfaces (I2C, SPI, USART), and a rich set of timers including a low-power timer. The device supports a wide supply voltage range from 1.8V to 3.6V, with a typical operating current of 84 uA/MHz in Run mode and as low as 0.29 uA in Standby mode with RTC. The STM32L031K6T6 also integrates a true EEPROM emulation, a 12-bit DAC, and a comparator, making it versatile for analog sensing applications.
Technically, the STM32L031K6T6 is built on a 110nm process, offering a balance between performance and power. The Cortex-M0+ core includes a single-cycle multiplier and a nested vectored interrupt controller (NVIC), enabling efficient interrupt handling. The device features a flexible clocking system with an internal 16 MHz RC oscillator, an external crystal oscillator, and a PLL, allowing designers to optimize for speed or power.
Typical applications include portable medical devices, smart sensors, fitness trackers, and industrial monitoring systems. Its ultra-low-power modes and rich analog peripherals make it ideal for applications that require long battery life and precise analog measurements, such as wearable health monitors and environmental sensors.
When designing with this device, pay attention to the power supply decoupling: place a 100nF capacitor close to each VDD pin and a 1uF capacitor on the main supply. For lowest power consumption, use the STOP mode with the RTC running, and configure unused GPIOs as analog inputs to avoid leakage currents.
드롭인 대체품: STM32L031K6T6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32L031K6T6 (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Flash Memory, Operating Temperature, Package, Supply Voltage.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STM32L031K4T6
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32L031K8T6
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32L051K6T6
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32L071K6T6
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32L031K6T6 최대 정격 & 전기적 특성
| Core | ARM Cortex-M0+ |
| Max Clock Speed | 32 MHz |
| Flash Memory | 32 KB |
| SRAM | 8 KB |
| 공급 전압 | 1.8 V to 3.6 V |
| 동작 온도 | -40C to +85C |
| 패키지 | LQFP-32 (7x7 mm) |
| 실장 유형 | Surface Mount |
| ADC | 12-bit, 1.14 Msps, with hardware oversampling |
| DAC | 12-bit |
| Comparators | 2 |
| Timers | 5 (including 1 low-power timer) |
| Communication Interfaces | I2C, SPI, USART |
| GPIO | Up to 25 |
| Low-Power Modes | Sleep, Low-power run, Low-power sleep, Stop, Standby |
| Standby Current | 0.29 uA (with RTC) |
| Run Current | 84 uA/MHz |
| RoHS 상태 | Compliant |
STM32L031K6T6 핀 구성
| 핀 1 | VBAT — Battery backup supply for RTC |
| 핀 2 | PC14 — GPIO / OSC32_IN |
| 핀 3 | PC15 — GPIO / OSC32_OUT |
| 핀 4 | OSC_IN — External clock input |
| 핀 5 | OSC_OUT — External clock output |
| 핀 6 | NRST — Reset (active low) |
| 핀 7 | VDD — Digital power supply |
| 핀 8 | VSS — Ground |
| 핀 9 | PA0 — GPIO / ADC_IN0 |
| 핀 10 | PA1 — GPIO / ADC_IN1 |
| 핀 11 | PA2 — GPIO / USART2_TX |
| 핀 12 | PA3 — GPIO / USART2_RX |
| 핀 13 | PA4 — GPIO / DAC_OUT1 |
| 핀 14 | PA5 — GPIO / SPI1_SCK |
| 핀 15 | PA6 — GPIO / SPI1_MISO |
| 핀 16 | PA7 — GPIO / SPI1_MOSI |
| 핀 17 | PB0 — GPIO / ADC_IN8 |
| 핀 18 | PB1 — GPIO / ADC_IN9 |
| 핀 19 | PB2 — GPIO / BOOT1 |
| 핀 20 | PB10 — GPIO / I2C2_SCL |
| 핀 21 | PB11 — GPIO / I2C2_SDA |
| 핀 22 | PB12 — GPIO / SPI2_NSS |
| 핀 23 | PB13 — GPIO / SPI2_SCK |
| 핀 24 | PB14 — GPIO / SPI2_MISO |
| 핀 25 | PB15 — GPIO / SPI2_MOSI |
| 핀 26 | PA8 — GPIO / MCO |
| 핀 27 | PA9 — GPIO / USART1_TX |
| 핀 28 | PA10 — GPIO / USART1_RX |
| 핀 29 | PA11 — GPIO / USART1_CTS |
| 핀 30 | PA12 — GPIO / USART1_RTS |
| 핀 31 | PA13 — GPIO / SWDIO |
| 핀 32 | PA14 — GPIO / SWCLK |
일반적인 애플리케이션
STM32L031K6T6 적합 용도: 6 애플리케이션s: Wearable Health Monitor, Smart Sensor Node, Portable Medical Device, Industrial Monitoring System, IoT Edge Node, Battery Management System.
Wearable Health Monitor
The STM32L031K6T6 is ideal for wearable health monitors due to its ultra-low power consumption (84 uA/MHz in Run mode, 0.29 uA in Standby) and integrated analog peripherals. It can interface with biosensors (e.g., heart rate, temperature) via I2C or SPI, process data with the Cortex-M0+ core, and communicate via BLE through an external module. The 12-bit ADC with oversampling enables precise signal acquisition, while the low-power modes extend battery life to months. Designers can use the STOP mode with RTC to periodically wake the device for measurements, minimizing energy usage. The LQFP-32 package is compact enough for small form-factor PCBs, and the wide supply voltage range (1.8V-3.6V) allows direct coin-cell battery operation.
추천
Smart Sensor Node
In industrial IoT and smart agriculture, the STM32L031K6T6 serves as a low-power sensor node controller. Its multiple communication interfaces (I2C, SPI, USART) allow connection to various sensors (temperature, humidity, pressure) and wireless modules (LoRa, Sigfox). The device's low-power modes enable battery-powered operation for years, with the ability to wake on external interrupts or RTC alarms. The 12-bit ADC and comparators can be used for threshold-based sensing, reducing processor wake-ups. The STM32L031K6T6's robust operating temperature range (-40C to +85C) suits outdoor environments. Designers can leverage the hardware oversampling to improve ADC resolution for accurate measurements, and the flexible clocking system allows optimization between speed and power.
추천
Portable Medical Device
The STM32L031K6T6 is well-suited for portable medical devices like glucose meters and pulse oximeters. Its ultra-low power consumption ensures long battery life, critical for patient convenience. The integrated 12-bit DAC and comparators enable analog signal conditioning, while the ADC with oversampling provides high-resolution measurements. The device's small LQFP-32 package allows compact PCB designs, and the wide supply voltage range accommodates various battery chemistries. In a typical glucose meter, the MCU reads the sensor via ADC, processes the data, and displays results on an LCD or sends via UART to a smartphone. The low-power modes allow the device to remain in standby between measurements, drawing only microamps.
추천
Industrial Monitoring System
The STM32L031K6T6 can be used in industrial monitoring systems for data acquisition and control. Its robust operating temperature range and wide supply voltage make it suitable for harsh environments. The device's multiple timers and communication interfaces enable interfacing with industrial sensors and actuators. The 12-bit ADC can sample analog signals from pressure or temperature transducers, and the USART can communicate with a central PLC or gateway. The low-power modes are beneficial for battery-backed monitoring stations. Designers can use the low-power timer to periodically wake the system for measurements, reducing energy consumption. The STM32L031K6T6's rich peripheral set allows for a compact, cost-effective design.
추천
IoT Edge Node
The STM32L031K6T6 is an excellent choice for IoT edge nodes that require local processing and low power. It can collect data from sensors, perform basic processing, and transmit via a wireless module. The device's ultra-low-power modes allow battery-powered operation for extended periods. The communication interfaces (I2C, SPI, USART) enable connection to various sensors and radios. The 12-bit ADC is useful for reading analog sensors, and the comparators can be used for wake-up on threshold events. The STM32L031K6T6's small package and low cost make it ideal for mass-deployed IoT devices. Designers can use the STOP mode with RTC to schedule periodic transmissions, minimizing power consumption.
추천
Battery Management System
The STM32L031K6T6 can be used in battery management systems (BMS) for monitoring and protection. Its low-power operation is crucial for minimizing self-discharge of the battery pack. The 12-bit ADC can measure cell voltages and currents, while the comparators can trigger protection interrupts on overvoltage or undervoltage. The device's communication interfaces allow reporting to a host controller. The wide supply voltage range (1.8V-3.6V) is compatible with typical battery voltages. The STM32L031K6T6's low-power modes enable the BMS to remain in standby when not actively monitoring, extending battery life. The LQFP-32 package is suitable for compact BMS PCBs.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32L031K6T6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32L031K4T6 | STM32L031K8T6 | STM32L051K6T6 | STM32L071K6T6 |
|---|---|---|---|---|---|
| Package | LQFP-32 | LQFP-32 | LQFP-32 | LQFP-32 | LQFP-32 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Flash Memory | 32 KB | 16 KB | 64 KB | 32 KB | 192 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 20 KB |
| Max Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Standby Current | 0.29 uA | 0.29 uA | 0.29 uA | 0.29 uA | 0.29 uA |
| True EEPROM | No | No | No | Yes | Yes |
주요 차별점
- Ultra-low standby current of 0.29 uA with RTC (vs STM32L051K6T6)
- 32 KB Flash in a cost-optimized package (vs STM32L031K4T6)
- Pin-compatible with higher-memory variants (vs STM32L031K8T6)
설계 노트
For ultra-low-power operation, use the STOP mode with RTC to achieve 0.29 uA standby current. Ensure all unused GPIOs are configured as analog inputs to prevent leakage. Decouple each VDD pin with a 100nF capacitor and add a 1uF capacitor on the main supply. Use the internal 16 MHz RC oscillator for fast wake-up, or an external 32.768 kHz crystal for accurate RTC timing.
Place the decoupling capacitors as close as possible to the VDD and VDDA pins. For the LQFP-32 package, ensure a solid ground plane under the device. If using the ADC, separate analog and digital ground planes and connect them at a single point. Keep the crystal oscillator traces short and shielded to avoid noise coupling.
Do not exceed the absolute maximum ratings: supply voltage 3.6V and input voltage on any pin up to VDD+0.3V. When programming the Flash, ensure the supply voltage is within the specified range (2.0V-3.6V for write/erase). Also, be aware that the BOOT0 pin (PB2) must be pulled low for normal boot from Flash; a floating BOOT0 can cause unexpected boot behavior.
규정 준수 정보
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified; for automotive, consider STM32L0 series with -Q suffix.
