STM8L152C4T6 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics
부품 번호: STM8L152C4T6 ✓ 활성STM8L152C4T6 개요
An ultra-low-power microcontroller is a semiconductor that minimizes energy consumption during active operation, standby, and shutdown while retaining enough peripheral capability for embedded control. The STM8L family hierarchy places this device between general-purpose 8-bit Flash MCUs and highly integrated energy-harvesting and low-power control solutions. It belongs to the broader category of embedded microcontrollers, which execute firmware, read sensors, drive displays, and manage communications on a single integrated circuit.
The STM8L152C4T6 provides 16 KB of Flash program memory and operates at up to 16 MHz. Its feature set includes an LCD interface, real-time clock capability, timers, USART, I2C, SPI, a 12-bit ADC, DAC, and comparators, as listed in the family datasheet description. These resources support connected sensing, compact human-interface panels, industrial controls, and measurement equipment. The 48-pin LQFP package also provides enough I/O for segment or matrix LCD drive signals alongside communications and discrete control outputs.
The STM8L152C4T6 uses a dedicated 8-bit MCU architecture rather than an ARM Cortex core. This makes it suitable for straightforward control loops, protocol handling, and low-cost embedded products where deterministic peripheral access and low standby energy are more valuable than high-level 32-bit processing. Firmware can be organized around the integrated timers, serial interfaces, analog converters, and display controller without requiring a separate display driver IC.
Typical applications include low-power metering equipment, battery-operated sensor nodes, compact industrial control panels, security and access-control terminals, and instruments with local LCD displays. The LCD controller, real-time clock, and low-power operating modes are especially useful when a device must present measured information while preserving standby energy. The 48-pin package also suits designs that need multiple I/O, analog inputs, or several peripheral connections on one board.
Designers should confirm the exact pin multiplexing, power supply range, clock configuration, and peripheral assignments against the manufacturer datasheet before layout release. Decoupling requirements, LCD segment mapping, ADC reference strategy, and low-power mode entry conditions should be validated early because each can affect the final power budget and board density. The STM8L152C4T6 is normally supplied in an LQFP package for through-hole assembly compatibility and automated PCB placement.
This page combines the verified manufacturer and distributor product details with package-specific engineering guidance, practical application fit, interface-selection questions, and honest comparisons against same-family STM8L devices. It helps engineers narrow the STM8L choice before committing to a schematic, PCB footprint, firmware configuration, or sourcing plan.
드롭인 대체품: STM8L152C4T6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM8L152C4T6 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Real-Time Clock, Timers, Flash Memory, Architecture.
STM8L152C6T6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM8L152C8T6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.5586 / 개
데이터시트 보기 →STM8L151C4T6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM8L151C6T6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM8L151C8T6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM8L152C4T6 최대 정격 & 전기적 특성
| Product Type | 8-bit ultra-low-power Flash microcontroller |
| Maximum CPU Frequency | 16 MHz |
| Flash Program Memory | 16 KB |
| Program Memory Organization | 16K x 8 |
| 패키지 | 48-LQFP (7 x 7 mm) |
| 핀 수 | 48 pins |
| 공급 전압 | 2.5 V / 3.3 V |
| LCD Controller | Yes |
| Real-Time Clock | Yes |
| Serial Interface | USART |
| Serial Interface | I2C |
| Serial Interface | SPI |
| Analog-to-Digital Converter | 12-bit ADC |
| Digital-to-Analog Converter | DAC |
| Comparator | Yes |
| 실장 유형 | Surface mount |
| Manufacturer | STMicroelectronics |
STM8L152C4T6 48-lqfp (7 x 7 mm) 핀 구성 가이드
STM8L152C4T6(48-lqfp (7 x 7 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM8L152C4T6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM8L152C4T6 적합 용도: 6 애플리케이션s: Battery-Powered Energy Metering, LCD-Operated Industrial Control Panel, Low-Power Environmental Sensor Node, Security and Access-Control Terminal, Compact Measurement and Test Instrument, Battery-Powered Actuator and Control Module.
Battery-Powered Energy Metering
The STM8L152C4T6 fits battery-powered metering equipment because its ultra-low-power STM8L architecture supports energy-conscious operating modes while retaining a 16 MHz CPU for measurement control. The integrated 12-bit ADC, comparators, timers, and RTC allow a compact design to acquire analog readings, schedule periodic measurements, and retain time information without adding separate interface chips. Its LCD controller can drive a local display for consumption, status, or service data. Compared with a general-purpose microcontroller, the STM8L152C4T6 offers a more targeted low-power feature set and a 48-pin LQFP footprint with ample I/O for sensor inputs, LCD drive lines, and a communications port.
추천
LCD-Operated Industrial Control Panel
The STM8L152C4T6 is suitable for a compact industrial control panel with a local character or segment display because it integrates an LCD controller alongside timers, ADC inputs, and serial communications. Its 48-LQFP package provides a practical pin budget for display drive signals, operator inputs, sensor connections, and an RS-485 or similar external transceiver interface. The 16 MHz clock supports responsive menu and control logic, while the RTC can timestamp events or manage scheduled operations. The 16 KB Flash limit must be checked against the UI state machine and communications stack, in which case STM8L152C6T6 may be a more appropriate same-family choice.
추천
Low-Power Environmental Sensor Node
The STM8L152C4T6 can serve as the controller in a low-power environmental sensor node that periodically measures temperature, humidity, light, or analog sensor outputs. The 12-bit ADC and comparators support threshold-based sensing, while USART, I2C, and SPI provide flexible links to external sensors and radio modules. Its ultra-low-power family positioning is valuable for duty-cycled nodes that spend most of their time in standby and wake to capture and transmit data. The 16 KB Flash capacity is adequate for compact protocol stacks, but a more elaborate application may require STM8L152C6T6 or STM8L152C8T6 with more program space while preserving the STM8L152 architecture.
추천
Security and Access-Control Terminal
The STM8L152C4T6 can be used in access-control terminals and compact security equipment where a low-power MCU, LCD controller, RTC, and serial peripherals are useful in one device. It can supervise keypad or sensor inputs, manage a local display, record timestamps, and communicate with a host or controller over USART, I2C, or SPI. The 48-pin LQFP package leaves sufficient pins for external transceivers, indicator drivers, and tamper inputs. Firmware security and update requirements should be assessed against the 16 KB Flash limit; higher-code-density security products may benefit from STM8L152C8T6 while retaining the same STM8L152 family and package class.
추천
Compact Measurement and Test Instrument
The STM8L152C4T6 is appropriate for a handheld measurement instrument that combines analog input conditioning, a local display, timing functions, and data export. Its 12-bit ADC and comparators support signal measurement, timers can establish acquisition windows or generate outputs, and the LCD controller removes the need for a separate display controller. USART, I2C, and SPI allow connection to a sensor front end, calibration storage, or laboratory equipment. The MCU operates at up to 16 MHz, providing adequate control bandwidth for many instrumentation tasks while retaining low-power behavior during idle periods. The limited 16 KB Flash should be checked against calibration tables and protocol code before layout release.
추천
Battery-Powered Actuator and Control Module
The STM8L152C4T6 can control a battery-powered actuator module that combines low-power operation, timed control sequences, and local status indication. Timers and the RTC support scheduled motion, duty cycles, and maintenance intervals, while GPIO and serial interfaces can accept external commands or feedback from sensors and motor drivers. The integrated LCD controller is useful where a local service display improves usability without adding a separate driver. Compared with a continuously running general-purpose MCU, the STM8L152C4T6 supports a lower-power system strategy for duty-cycled loads. Its 16 KB Flash suits compact control logic; more elaborate sequencing or communications code favors the larger STM8L152C6T6.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM8L152C4T6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM8L152C6T6 | STM8L152C8T6 | STM8L151C4T6 | STM8L151C6T6 | STM8L151C8T6 |
|---|---|---|---|---|---|---|
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Maximum CPU Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Program Memory | 16 KB | 32 KB | 64 KB | 16 KB | 32 KB | 64 KB |
| MCU Family | STM8L152 medium-density | STM8L152 | STM8L152 | STM8L151 | STM8L151 | STM8L151 |
| LCD Controller | Yes | Yes | Yes | Yes | Yes | Yes |
| DAC | Yes | Yes | Yes | No - STM8L151 family configuration | No - STM8L151 family configuration | No - STM8L151 family configuration |
| ADC | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Serial Interfaces | USART, I2C, SPI | USART, I2C, SPI | USART, I2C, SPI | USART, I2C, SPI | USART, I2C, SPI | USART, I2C, SPI |
| Supply Voltage | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V |
주요 차별점
- Combines STM8L152 analog capability with a 16 MHz core and integrated LCD control (vs STM8L151C4T6)
- Provides the smallest Flash option in the reviewed STM8L152 C-series alternatives (vs STM8L152C6T6)
- Matches the STM8L151C4T6 memory class while retaining the STM8L152 peripheral configuration (vs STM8L151C4T6)
- Offers a direct same-family memory-scaling path for firmware growth (vs STM8L152C8T6)
설계 노트
Build the power budget around the selected STM8L operating mode, LCD loading, ADC sampling rate, and peripheral clock gates. The STM8L152C4T6 is designed for low-power operation, but an always-on LCD, active ADC, or serial transceiver can dominate the system load. Keep analog and digital sections enabled only during measurement windows, disable unused peripherals in firmware, and confirm the regulator quiescent current before estimating battery life.
Route the 48-LQFP footprint directly from the manufacturer land pattern and preserve the pin-1 orientation marks before copper and paste are released. Place decoupling capacitors next to the appropriate supply pins and keep analog inputs away from switching nodes and LCD drive traces. Because many STM8L152 pads are multiplexed, assign every net from the datasheet pin-description table rather than assuming a generic 48-pin function layout.
Do not treat a same-package STM8L device as a firmware-compatible substitute without checking peripheral assignments. The STM8L152 and STM8L151 families provide similar low-power capabilities but differ in their analog peripheral configuration, including the DAC associated with the STM8L152 family. Review alternate functions, interrupt vectors, startup settings, LCD channels, and pin multiplexing whenever replacing STM8L152C4T6 with another family member.
Treat ADC, DAC, comparator, and LCD signals as analog routes even though the MCU operates from a low-voltage digital supply. Use a quiet reference arrangement, short analog traces, and a defined return path beneath sensitive circuitry. Avoid routing LCD drive lines adjacent to high-impedance sensor inputs, and validate the acquisition sequence and settling time in hardware when the measured signal source has substantial impedance.
규정 준수 정보
The manufacturer product page identifies the STM8L152C4 as part of the medium-density STM8L151x4/6 and STM8L152x4/6 ultra-low-power family. No specific compliance declaration for the exact order code is stated in the available product listings.