TAS5630BPHD - 300W Stereo Class-D Amplifier | Texas Instruments
부품 번호: TAS5630BPHD ✓ 활성TAS5630BPHD 개요
A Class-D audio amplifier is a switching power stage that efficiently converts a differential audio input into a high-current speaker output. The Class-D hierarchy belongs to audio power amplifiers, which in turn are power-management integrated circuits. Compared with a linear amplifier, a properly filtered Class-D output can deliver substantially higher power efficiency, although the switching waveform requires careful output filtering, PCB layout, and thermal management.
The TAS5630BPHD combines analog input, integrated closed-loop feedback, and high-power output capability in one device. Its headline ratings are 300 W stereo output, 400 W mono output, and a 25 V to 52.5 V operating supply range. The PHD ordering option uses a 64-pin HTQFP package and is specified for a 0 °C to 70 °C ambient temperature range. Actual continuous output power depends on the power supply, speaker impedance, filter configuration, PCB copper area, heat sink, and thermal-interface material.
PurePath HD feedback helps reduce distortion associated with output-network and speaker-load variations by sampling the output through the feedback network. This makes the amplifier appropriate for demanding powered-speaker systems, home-theater receivers, professional audio equipment, and compact high-power audio modules. The analog input architecture allows conventional line-level signals to be connected without requiring a separate digital-to-analog converter.
Typical uses include powered stereo speakers, a bridged mono subwoofer stage, multimedia speakers, home-theater amplification, and industrial or professional audio systems. In stereo operation, the amplifier drives two channels; in mono operation, its available output power increases to 400 W. Designers must also account for the low-output-impedance, low-noise 12 V regulator recommended for the control supply in the manufacturer reference design.
The main design tradeoff is thermal performance. Although the device supports 300 W stereo and 400 W mono power levels, those ratings depend on an appropriate heat sink, thermal interface, and PCB layout. Follow the TAS5630B reference-design PCB layout, keep the power-supply and output-filter paths compact, and validate junction temperature at the highest expected channel load rather than relying only on the headline wattage.
This page combines the manufacturer power and package ratings with application guidance, drop-in alternatives, comparison parameters, and practical thermal and layout considerations. It is intended to help engineers determine whether the TAS5630BPHD fits a high-power analog Class-D design before committing to a 64-pin HTQFP layout.
드롭인 대체품: TAS5630BPHD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: TAS5630BPHD (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type.
TAS5630PHD
✅ 드롭인가격 문의
데이터시트 보기 →TAS5630BPHDR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TAS5630BPHD 최대 정격 & 전기적 특성
| Product Type | Analog-input Class-D audio power amplifier |
| Stereo Output Power | 300 W |
| Mono Output Power | 400 W |
| Supply Voltage Range | 25 V to 52.5 V |
| Channel Configuration | 1 channel mono or 2 channels stereo |
| Feedback Technology | PurePath HD integrated closed-loop feedback |
| 패키지 | 64-pin HTQFP PHD, 14 mm x 14 mm |
| 핀 수 | 64 pins |
| Operating Ambient Temperature | 0 °C to 70 °C |
| 실장 유형 | Surface mount |
TAS5630BPHD 64-pin htqfp phd, 14 mm x 14 mm 핀 구성 가이드
TAS5630BPHD(64-pin htqfp phd, 14 mm x 14 mm 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: TAS5630BPHD.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TAS5630BPHD 적합 용도: 6 애플리케이션s: High-Power Stereo Speaker, Bridged Mono Subwoofer, Home-Theater Amplifier, Professional Active Monitor, Multimedia Speaker System, Industrial Audio Amplifier.
High-Power Stereo Speaker
The TAS5630BPHD is suitable for powered stereo speakers requiring up to 300 W per channel from a 25 V to 52.5 V supply. Its analog input accepts conventional line-level audio, while PurePath HD closed-loop feedback supports accurate output control as speaker impedance changes. The amplifier operates as two Class-D output channels, with the external LC filter and speaker interface setting the final acoustic bandwidth. Designers should select the speaker impedance, supply capacity, and output-filter components from the manufacturer application circuit. A thermal design that maintains the specified 0 °C to 70 °C ambient range is essential because continuous output near 300 W depends on the heat sink and PCB heat spreading.
추천
Bridged Mono Subwoofer
In a bridged mono configuration, TAS5630BPHD can deliver up to 400 W into a suitably rated speaker load while using the Class-D output stage more efficiently than a conventional single-ended arrangement. The 25 V to 52.5 V operating range supports high-current audio systems where rail voltage is available from the power supply. Correct bridge operation requires compatible output-filter components, balanced speaker wiring, and careful control of common-mode behavior. The 64-pin HTQFP package also needs a substantial thermal solution because output-device and conversion losses raise device temperature. Engineers should verify speaker power tolerance, thermal shutdown margins, and maximum excursion because these are independent of the amplifier's electrical output rating.
추천
Home-Theater Amplifier
The TAS5630BPHD can form the power stage of a home-theater or multi-channel amplifier because it supports both stereo and mono operating modes from an analog input source. Its 300 W stereo capability provides ample headroom for demanding floor-standing speakers, while 400 W mono operation can support a higher-power subwoofer channel. A low-noise 12 V control supply helps prevent supply disturbance from entering the audio path. In a multi-channel enclosure, thermal isolation and independent channel loading are important: one amplifier dissipating substantial power can affect adjacent stages. The recommended PCB layout and output-filter topology should be reproduced closely to preserve switching-noise and stability performance.
추천
Professional Active Monitor
TAS5630BPHD is appropriate for active studio monitors and professional powered speakers where high continuous power, analog control, and efficient amplification are valuable. The 300 W stereo rating allows a monitor designer to provide substantial headroom without moving to a linear output stage. Its integrated PurePath HD feedback can reduce sensitivity to changes in the output network and connected speaker load, supporting more consistent sound reproduction. The analog input path also integrates naturally with balanced or single-ended audio front ends. Because professional monitors may operate continuously, thermal validation should include worst-case ambient temperature, minimum speaker impedance, and sustained full-scale content rather than short-duration sine-wave testing.
추천
Multimedia Speaker System
A TAS5630BPHD-based multimedia speaker can provide 300 W stereo amplification from an analog audio source while keeping the power stage efficient. This configuration fits powered bookshelves, cinema speakers, conference-room speakers, and premium computer speakers that need more output than a small integrated audio amplifier can provide. The external output filter and PCB routing are critical because Class-D switching energy can interfere with sensitive analog circuitry. Texas Instruments recommends following the TAS5630B reference PCB layout and using a low-noise, low-output-impedance regulator for the 12 V control supply. A practical design should also provide protections appropriate to the speaker wiring and installation environment.
추천
Industrial Audio Amplifier
TAS5630BPHD can be used in industrial audio systems, public-address equipment, and powered speaker modules that require high output from a compact amplifier IC. Its 25 V to 52.5 V power-stage supply range suits systems using an industrial bus-derived power architecture, while the 0 °C to 70 °C PHD temperature specification covers many commercial ambient environments. The design must separate the switching power stage from sensitive signal conditioning and prevent output-filter components from introducing excessive attenuation at the audio band. For equipment with long speaker cables, protection and isolation should be assessed separately. Validate thermal performance across the expected duty cycle because speech, music, or alarm signals have different average power demands.
추천
추천 제품 요약
엔지니어링 참조 데이터: TAS5630BPHD — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TAS5630PHD | TAS5630BPHDR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 64-HTQFP (PHD) | 64-HTQFP (PHD) | 64-HTQFP (PHD) |
| Stereo Output Power | 300 W | 300 W | 300 W |
| Mono Output Power | 400 W | 600 W | 400 W |
| Channel Configuration | 1 channel mono or 2 channels stereo | 1 channel mono or 2 channels stereo | 1 channel mono or 2 channels stereo |
| Input Type | Analog input | Analog input | Analog input |
| Feedback Technology | PurePath HD integrated closed-loop feedback | PurePath HD integrated closed-loop feedback | PurePath HD integrated closed-loop feedback |
| Shipping Format | PHD tray configuration | PHD tray configuration | PHDR tape-and-reel configuration |
주요 차별점
- Newer TAS5630B feature set (vs TAS5630PHD)
- Identical electrical configuration across ordering formats (vs TAS5630BPHDR)
- Broad high-power output configuration (vs TAS5615PHDR)
- Integrated closed-loop feedback (vs TAS5616PHDR)
설계 노트
Use the exposed heat slug with a high-performance thermal interface material and a properly sized heat sink; Texas Instruments states that achievable output power depends on the thermal configuration. Do not assume that the 300 W stereo or 400 W mono rating describes continuous dissipation. Estimate device loss from the actual supply voltage, output power, and efficiency, then validate the hottest channel with sustained audio at the minimum supported speaker load. Include case temperature and ambient margin rather than checking only the output waveform.
Follow the TAS5630B reference-design PCB layout, especially the power-supply connections, exposed heat-slug area, and output-filter routing. The 64-pin HTQFP power stage requires uninterrupted ground and power planes, short high-current paths, and adequate copper around the package. Keep the analog input and feedback routing away from switching-node and output-filter areas. Changes to the reference layout can increase EMI, alter damping behavior, or compromise stability.
Provide a low-noise, low-output-impedance 12 V regulator for the control supply, as recommended in the TAS5630B application guidance. The power-stage supply must support the full 25 V to 52.5 V operating range and transient current demanded by the Class-D outputs. Use local bulk and high-frequency decoupling close to the package, and verify that supply resonances do not overlap the switching spectrum in the completed board.
Do not infer drop-in compatibility from the 64-pin HTQFP footprint alone. Compare every pin function, control signal, supply limit, output-filter requirement, and thermal limit between the original and replacement device. Also distinguish the PHD tray option from the PHDR tape-and-reel ordering form: the latter is electrically equivalent but has a different logistics format and should not be presented as a different amplifier design.
규정 준수 정보
Compliance status was not stated for the exact TAS5630BPHD ordering option. Confirm current environmental and material declarations with the manufacturer before using the part in regulated designs.