TCA0372DP2 - 1A Dual Power Op Amp | onsemi
부품 번호: TCA0372DP2 ✓ 활성TCA0372DP2 개요
A power operational amplifier is a high-current linear amplifier that combines the gain and signal handling of a conventional operational amplifier with the ability to source or sink substantial load current. Within the amplifier hierarchy, it belongs to the power-amplifier class rather than the general-purpose low-current op-amp category. Its practical role is to turn a low-level control signal into a high-current drive for motors, solenoids, and other demanding loads.
The TCA0372 family provides two independent amplifier channels, 1.0 A output-current capability per power-amplifier stage, and a 5 V to 40 V operating range. The absence of deadband crossover distortion is particularly useful when driving coils because the output crosses through zero more linearly than a conventional output stage with a dead region. This characteristic can reduce drive dead zone in bidirectional servo and actuator systems.
The monolithic power-amplifier architecture supports relatively demanding loads without requiring a separate external power-transistor stage. Because the device combines amplification and current delivery in one package, the surrounding design must still account for supply decoupling, output-current limits, thermal dissipation, and protection against inductive voltage spikes. Its wide 40 V maximum supply rating provides useful headroom for industrial and automotive-style actuator systems.
Typical applications include servo-amplifier loops, power-supply control stages, relay and solenoid drivers, motor-control systems, and other inductive or high-current loads. The dual-channel configuration can also support two coordinated actuator channels or one control function plus a complementary auxiliary function, subject to the applicable electrical and thermal limits.
For a new design, preserve adequate supply decoupling near the device, verify the continuous and peak current requirements of the connected load, and provide suitable flyback protection for inductive loads. The through-hole PDIP package is straightforward for prototype and legacy industrial assemblies, although a surface-mount power-amplifier option may be preferable for compact production hardware.
This product overview combines the confirmed 1.0 A current, 5 V to 40 V supply range, dual-channel architecture, no-deadband feature, and PDIP-8 format with practical guidance for amplifier selection, PCB implementation, thermal review, and drop-in replacement assessment.
드롭인 대체품: TCA0372DP2 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: TCA0372DP2 (동일 폼 팩터 및 풋프린트) — 차이점: Package.
TCA0372DP1G
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TCA0372DP1
✅ 드롭인가격 문의
데이터시트 보기 →TCA0372B
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TCA0372DP2 최대 정격 & 전기적 특성
| Product Type | Dual power operational amplifier |
| Amplifier Channel Count | 2 channels |
| 최대 출력 전류 | 1.0 A |
| Supply Voltage Range | 5 V to 40 V |
| Deadband Crossover Distortion | None |
| Architecture | Monolithic power operational amplifier |
| Output Capability | High-current output for coils and inductive loads |
| 패키지 | PDIP-8 |
| 핀 수 | 8 pins |
| 실장 유형 | Through-hole |
| Primary Application | Servo amplifiers and power supplies |
TCA0372DP2 pdip-8 핀 구성 가이드
TCA0372DP2(pdip-8 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: TCA0372DP2.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TCA0372DP2 적합 용도: 6 애플리케이션s: Servo Amplifier Control, Solenoid and Relay Drive, Power-Supply Control Stage, Bidirectional Motor Control, Audio and Low-Frequency Power Drive, Industrial Test and Measurement Output.
Servo Amplifier Control
The TCA0372DP2 fits servo-amplifier control loops because each channel combines operational-amplifier signal processing with a 1.0 A power output suitable for high-current actuator drive. Its no-deadband crossover behavior improves the transition around zero, which is valuable in bidirectional servo systems where a dead zone can cause sluggish or uneven response. The 5 V to 40 V supply range also accommodates common industrial actuator rails. Design the feedback network around the applicable gain-bandwidth and stability limits, and place compensation and decoupling close to the device to preserve control-loop behavior.
Solenoid and Relay Drive
The TCA0372DP2 can drive solenoid, relay, and other electromechanical coils when their steady-state and energization currents remain within the amplifier's 1.0 A output capability. Its high-current output stage reduces the need for a separate power transistor, while operation from 5 V to 40 V provides flexibility across industrial supply systems. A flyback diode or other clamp must protect the output from inductive voltage spikes. Because coil resistance changes with temperature, verify both inrush and continuous-load behavior rather than sizing the circuit from nominal current alone.
Power-Supply Control Stage
The TCA0372DP2 is identified by onsemi for power-supply applications, where a high-current operational-amplifier output can provide active feedback or drive an external power stage. Its 1.0 A capability is substantially higher than that of a conventional signal op-amp, while the monolithic construction simplifies the power path. The 5 V to 40 V operating range supports industrial control environments, provided the output-stage dissipation and load-transient requirements remain acceptable. Use stable feedback compensation and adequate supply bypassing, and verify that the power-supply topology remains safe under worst-case load conditions.
Bidirectional Motor Control
The TCA0372DP2 is appropriate for limited bidirectional motor-control stages where the current command requires a high-current linear output and the load remains within 1.0 A. The lack of deadband crossover distortion supports smoother reversal near the zero-command point, while the two amplifier channels can serve coordinated drive or control functions. Motor inductance creates significant voltage stress when current is interrupted, so an appropriate clamp and protection network are essential. Thermal design must account for sustained copper loss in the motor and continuous amplifier dissipation rather than only stall-current duration.
Audio and Low-Frequency Power Drive
The monolithic power operational-amplifier architecture makes the TCA0372DP2 relevant to low-frequency audio and transducer drive stages requiring more current than a conventional op-amp can provide. The 1.0 A output capability can support higher-current speaker, vibration, or acoustic actuators when their impedance and power ratings remain compatible. Its no-deadband characteristic reduces an output crossover artifact around zero, while the broad 5 V to 40 V supply range supports several unipolar amplifier arrangements. Configure feedback and stability for the load impedance, and verify distortion, bandwidth, and thermal performance at the lowest intended load impedance.
Industrial Test and Measurement Output
The TCA0372DP2 can serve as a current-capable output stage in industrial test and measurement equipment that must drive coils, small actuators, or a terminated load while retaining operational-amplifier control. The 1.0 A rating provides useful margin for higher-current loads than a standard dual op-amp can source, and the 5 V to 40 V supply range supports laboratory and industrial bus voltages. The two channels can implement complementary or independent functions. Confirm output swing, slew behavior, load stability, and thermal rise under the intended waveform before using the device as a precision signal source.
엔지니어링 참조 데이터: TCA0372DP2 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TCA0372DP1G | TCA0372DP1 | TCA0372B |
|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi |
| Package | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 |
| Product Type | Dual power operational amplifier | Dual power operational amplifier | Dual power operational amplifier | Dual power operational amplifier |
| Amplifier Channel Count | 2 channels | 2 channels | 2 channels | 2 channels |
| Output Current | 1.0 A | 1.0 A | 1.0 A | 1.0 A |
| Primary Applications | Servo amplifiers, power supplies, and inductive-load drive | Servo amplifiers and power supplies | Servo amplifiers and power supplies | Servo amplifiers and power supplies |
주요 차별점
- High-current output in a dual amplifier (vs TCA0372DP1)
- No-deadband output behavior (vs TCA0372B)
- Wide supply operating range (vs TCA0372DP1G)
설계 노트
Calculate power dissipation from the actual output voltage, load current, supply voltage, and duty cycle rather than assuming continuous 1.0 A operation. Estimated: with a 12 V supply, an 8 V output swing, and 1.0 A load, the output-stage dissipation is approximately 4 W before accounting for other losses. Confirm that the ambient temperature, PCB copper, and device thermal rating keep the junction temperature within its specified limit.
Place the required bypass capacitors close to the supply pins and use short, wide traces for output-current paths. Keep high-current return currents from sharing narrow paths with sensitive feedback or input signals. The two amplifier channels should have independent, symmetric routing when they drive separate loads, and feedback components should connect directly to the relevant output pins to minimize parasitic feedback and instability.
Do not treat the 1.0 A output-current rating as unlimited load capability. Check the load's cold resistance, inrush current, stalled current, and duty cycle, and leave thermal margin for elevated ambient temperature. Inductive loads also generate reverse voltage when current is interrupted, so provide an appropriate flyback clamp and verify that its energy rating and placement control voltage excursions at the output pin.
규정 준수 정보
Confirm current RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification declarations for the exact ordering code before production release.