THC63LVD1027D-B - Dual Link LVDS Repeater | THine Solutions
부품 번호: THC63LVD1027D-B ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.22 | $4.22 |
| 10 | $4.22 | $42.20 |
| 100 | $4.22 | $422.00 |
| 500 | $4.22 | $2,110.00 |
| 1,000 | $4.22 | $4,220.00 |
THC63LVD1027D-B 개요
An LVDS repeater is a high-speed interface IC that receives degraded or attenuated LVDS serial data streams, regenerates them with clean, wide-open, low-noise eye diagrams, and re-transmits them over longer distances. Within the display interface hierarchy (repeater -> LVDS transceiver -> interface IC -> flat panel display driver chain), repeaters extend signal reach without converting to a different signaling standard, preserving latency and signal integrity.
Key features of the THC63LVD1027 family include support for display resolutions up to 1080p/WUXGA, multiplex and de-multiplex of LVDS signals to reduce the number of transmission lines, waveform reforming that produces wide-open and low-noise eye diagrams, and signal duplication from one port with distribution to multiple outputs. The D-suffix device extends resolution support from the original THC63LVD1027 (1080p/UXGA) to 1080p/WUXGA.
The architecture receives dual-link LVDS pixel data, recovers timing, and drives fresh LVDS output levels, effectively isolating the host from capacitive loading of long cable or flex runs. This makes it suitable for television panels, large-format monitors, automotive and industrial displays where the LVDS source is physically separated from the panel.
Typical applications include flat panel display interfaces, TV and monitor LVDS link extension, and dual-link pixel distribution systems.
Designers should observe proper differential pair routing and use the exposed pad for ground connection to maintain signal integrity at LVDS data rates.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: THC63LVD1027D-B — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
THC63LVD1027D
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
THC63LVD1027
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
THC63LVD1027D-B 사양
| 기능 | Dual Pixel Link LVDS Repeater |
| Number of LVDS Inputs | 30 |
| Number of LVDS Outputs | 30 |
| I/O Interface | LVDS |
| Max Supported Resolution | 1080p / WUXGA |
| 패키지 | 64-TFSOP (0.240", 6.10 mm Width) Exposed Pad |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40C to +85C |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
THC63LVD1027D-B 64-tfsop (0.240", 6.10 mm width) exposed pad 핀 구성 가이드
THC63LVD1027D-B(64-tfsop (0.240", 6.10 mm width) exposed pad 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: THC63LVD1027D-B.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
THC63LVD1027D-B 적합 용도: 6 애플리케이션s: Flat Panel Display LVDS Link Extension, Dual-Link Pixel Signal Distribution, Industrial and Automation Display Interfaces, Automotive Infotainment Display Links, Medical Monitor Display Systems, Digital Signage and Large-Format Displays.
Flat Panel Display LVDS Link Extension
In LCD television and monitor architectures, the timing controller (TCON) is often located far from the panel's source driver boards, connected through long flex or cable runs that attenuate LVDS signals and close the eye diagram. The THC63LVD1027D-B addresses this by receiving the degraded dual-link LVDS stream and regenerating it with wide-open, low-noise eye diagrams at the output, per THine's official product description. Its dual pixel link, 30-input/30-output channel structure supports resolutions up to 1080p/WUXGA, covering the mainstream panel range. Placing the repeater mid-link effectively resets signal integrity, allowing the same TCON to drive larger panels without changing the source interface. Designers should maintain 100-ohm differential impedance throughout the repeater path.
추천
Dual-Link Pixel Signal Distribution
The THC63LVD1027 family can duplicate the signal from one input port and distribute it to multiple output ports, per THine's product page. This enables a single host LVDS source to feed two or more display sinks - useful in mirrored display walls, digital signage, and dual-panel medical or industrial monitors where both panels must show identical content with no added host logic. Because the repeater regenerates full LVDS swing at each output, signal quality at each sink is independent of fan-out, unlike passive splitters which halve differential amplitude and close the eye. The 30-in/30-out channel map preserves the dual pixel link structure so both branches carry full-resolution 1080p/WUXGA pixel data. Terminate each branch at its sink per LVDS practice.
추천
Industrial and Automation Display Interfaces
Industrial HMIs, machine-vision displays, and factory automation terminals frequently route LVDS from a controller box to a panel over 20-50 cm of harness, which is marginal for un-repeated LVDS at WUXGA-class data rates. The THC63LVD1027D-B, rated -40C to +85C, tolerates the ambient conditions inside sealed industrial enclosures. Its waveform-reforming repeater function converts marginal received eye diagrams into clean regenerated outputs, per the manufacturer datasheet, directly improving BER margin in electrically noisy factory environments with motor drives and switch-mode supplies nearby. The multiplex/de-multiplex capability also reduces harness conductor count, lowering cable cost and improving flex life on moving machine parts. Use shielded twisted-pair cabling for the differential links.
추천
Automotive Infotainment Display Links
Automotive center-stack and cluster displays driven by LVDS-style pixel links benefit from a mid-link repeater when the display is mounted far from the head unit, for example across the windshield header or in a long-dash architecture. The THC63LVD1027D-B's -40C to +85C operating range covers most in-cabin ambient zones (note: verify automotive qualification separately with THine). According to the product description, the device reforms LVDS waveforms into wide-open, low-noise eye diagrams, restoring margin lost across the vehicle harness and its transient-laden environment. Its dual-link, 30-pair structure supports 1080p-class clusters and passenger displays. Route LVDS pairs on twisted-pair or tightly coupled PCB traces with 100-ohm differential impedance and bypass supplies locally.
추천
Medical Monitor Display Systems
Diagnostic medical displays (radiology PACS monitors, surgical displays) demand flicker-free, bit-accurate pixel delivery at high resolutions, and their large panels put the LVDS receiver electrically distant from the imaging electronics. The THC63LVD1027D-B regenerates the dual pixel link up to 1080p/WUXGA resolution, per THine's official product page, ensuring the full eye is re-established at the panel input regardless of upstream cable length. Because the repeater is transparent to pixel data, it adds no image-processing artifacts, preserving grayscale fidelity critical to medical imaging compliance. Its low-noise output eye also minimizes timing jitter that could cause single-pixel errors - unacceptable in diagnostic contexts. Shield the LVDS harness and verify grounding to the imaging system chassis.
추천
Digital Signage and Large-Format Displays
Large-format signage panels and stretched displays often place the driver electronics in a separate enclosure from the panel to satisfy thermal and serviceability requirements, creating long LVDS runs. The THC63LVD1027D-B's repeater function directly counters the inter-symbol interference and differential attenuation of these runs: per the manufacturer, it multiplexes and de-multiplexes LVDS signals to reduce transmission line count, and reforms waveforms for wide-open, low-noise eye diagrams. Supporting up to 1080p/WUXGA over dual pixel links, it handles the resolution class typical of commercial signage. Because signage systems run 24/7, the regenerated signal margin also reduces long-term BER drift as cable and connector aging accumulate. Derate cable length conservatively and add local supply bypassing at the repeater.
추천
추천 제품 요약
엔지니어링 참조 데이터: THC63LVD1027D-B — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | THC63LVD1027D | THC63LVD1027 |
|---|---|---|---|
| Package | 64-TFSOP (0.240", 6.10mm) Exposed Pad | 64-TFSOP (0.240", 6.10mm) Exposed Pad - same | 64-TFSOP (0.240", 6.10mm) Exposed Pad - same |
| Brand | THine Electronics | THine Electronics | THine Electronics |
| Function | Dual Pixel Link LVDS Repeater | Dual Pixel Link LVDS Repeater | Dual Pixel Link LVDS Repeater |
| Max Resolution | 1080p/WUXGA | 1080p/WUXGA | 1080p/UXGA |
| LVDS I/O | 30 in / 30 out | 30 in / 30 out | 30 in / 30 out |
주요 차별점
- WUXGA-class dual-link support (vs THC63LVD1027)
- Waveform reforming with eye regeneration (vs Passive LVDS fan-out or longer cable)
- Trade-off: single-manufacturer sourcing (vs THC63LVD1027D)
설계 노트
Route all LVDS differential pairs on the THC63LVD1027D-B board section with controlled 100-ohm differential impedance, matched intra-pair skew, and a continuous ground reference plane. Since this repeater's purpose is eye-diagram regeneration, poor input routing defeats its function - keep input pairs away from switching rails and clock lines. On the output side, the regenerated eye is only as good as the output routing; maintain symmetry and minimize vias to preserve the low-jitter output the device is specified to deliver.
The 64-TFSOP exposed pad must be soldered to a ground pour with an array of thermal vias. The exposed pad is the primary ground return for the LVDS output drivers; a floating or poorly connected pad raises ground inductance and degrades eye quality. Use at least a 5x5 via array on a 1-mm pitch pattern under the pad, connected to the internal ground plane. Follow the land pattern in the manufacturer datasheet for stencil aperture sizing to avoid voiding.
Verify the resolution class before substitution: the original THC63LVD1027 supports 1080p/UXGA while the THC63LVD1027D/-B supports 1080p/WUXGA. Using the non-D part in a WUXGA panel design will fail. Also confirm supply decoupling per the datasheet (local 0.1 uF ceramics per supply pin plus bulk capacitance) and check that the -B suffix ordering variant matches your required packaging (Tape & Reel) and any firmware/configuration expectations for your TCON before release to production.
규정 준수 정보
Compliance data was not present in the provided verified web data; confirm RoHS/REACH status on the THine official product page or DigiKey compliance section.
