Texas Instruments

THS1209CDA - 12-Bit 8 MSPS Dual-Channel ADC | Texas Instruments

부품 번호: THS1209CDA ✓ 활성
32-TSSOP Package
MOQ: 1 |

THS1209CDA 개요

The Texas Instruments THS1209CDA is a 12-bit, 8 MSPS dual-channel analog-to-digital converter with a DSP or microprocessor interface, channel autoscan, low-power operation, and a 32-pin TSSOP package. It is designed for applications requiring simultaneous sampling of two analog inputs and supports single-ended or differential input configurations. The converter provides a 32-TSSOP package, 12-bit resolution, 8 MSPS sampling rate, and dual-channel operation.

An analog-to-digital converter, or ADC, is an integrated circuit that converts continuous analog voltages into numerical values for processing by a digital system. The THS1209 belongs to the data-acquisition ADC hierarchy, combining signal acquisition, sampling, quantization, and digital-data transfer. Its dual-channel architecture is useful when two analog signals must be monitored within the same measurement system, while its processor-oriented interface supports integration with DSPs, microprocessors, and embedded control platforms.

Key features include 12-bit resolution, an 8 MSPS conversion rate, two analog input channels, pipelined operation, channel autoscan, and a DSP or microprocessor interface. The low-power operating characteristic is useful in portable and power-constrained designs, although the complete power specification should be confirmed against the manufacturer datasheet for the selected supply and output modes. The 32-pin TSSOP package supports surface-mount PCB construction while requiring careful analog and digital layout practices.

The device uses a proprietary pipelined conversion method, allowing analog samples to be acquired at a high conversion rate while digital results are transferred through the serial interface. The dual-channel structure can support simultaneous sampling, which helps preserve timing relationships between two measured quantities. Digital control signals provide channel selection and operating-mode control, while the interface architecture is intended to reduce the burden on host processors when transferring conversion results.

Typical applications include communications infrastructure, industrial process monitoring, medical instrumentation, data-acquisition systems, and embedded signal-processing equipment. The 8 MSPS rate is suitable for acquiring waveforms and sampled sensor signals in systems that require more temporal resolution than a slow control-oriented ADC provides. The two-channel capability also benefits differential measurement, dual-rail monitoring, and feedback-control applications where paired analog values must be captured consistently.

For reliable operation, place analog input, reference, and decoupling connections close to the device and separate sensitive analog routing from high-current digital return paths. The datasheet pin-description table and recommended application circuit should govern trace assignment, grounding, and decoupling values. Review the input common-mode range, output coding, interface timing, and power-supply sequencing requirements before finalizing the PCB.

This product page combines the THS1209CDA technical identity, package and interface details, source-backed specifications, application guidance, design notes, and compatible replacement information. It is intended to help engineers evaluate whether this 12-bit, 8 MSPS dual-channel ADC fits a new design or a board-repair program without changing the existing 32-TSSOP footprint.

드롭인 대체품: THS1209CDA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: THS1209CDA (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature Range, Input Configuration, Package, RoHS Status, Architecture.

Texas Instruments
Operating Temperature Range: 0°C to 70°C
Package: 32-pin TSSOP (DA)
RoHS Status: Compliant
비교 대상: THS1209CDA →
Texas Instruments
Input Configuration: 2 single-ended or 1 differential
RoHS Status: Compliant
Architecture: Pipelined ADC with simultaneous sampling
비교 대상: THS1209CDA →
Texas Instruments
Operating Temperature Range: -40°C to +85°C
Package: 32-pin TSSOP (DA)
Architecture: Pipelined ADC
비교 대상: THS1209CDA →

THS1209CDAG4

✅ 드롭인
Texas Instruments
📦 32-TSSOP
12 bit · 8 MSPS · 2 (single-ended) / 1 (differential) · Pipelined ADC with simultaneous sampling · 2 single-ended or 1 differential · Parallel (DSP/microprocessor-compatible) · Yes · 5 V

가격 문의

데이터시트 보기 →

THS1209IDA

✅ 드롭인
Texas Instruments
📦 32-TSSOP
12 bit · 8 MSPS · 2 · Simultaneous sampling · Pipelined ADC · Single-ended or differential · DSP or microprocessor interface · Channel autoscan

가격 문의

데이터시트 보기 →

THS1209IDAG4

✅ 드롭인
📦 32-TSSOP
Same listed 12-bit, 8 MSPS dual-channel performance and 32-TSSOP terminals; ordering and temperature-grade suffixes differ

📋 참조 대체품 (카탈로그에 없음)

THS1206CDA

✅ 드롭인
Texas Instruments
📦 32-TSSOP
12 bit · 6 MSPS · 4 channels · 4 simultaneous single-ended inputs · 2 simultaneous differential inputs · 4.75 V to 5.25 V · 0°C to 70°C · ±1 LSB

가격 문의

데이터시트 보기 →

THS1209CDA 최대 정격 & 전기적 특성

ADC Resolution 12 bit
샘플링 속도 8 MSPS
Number of Analog Input Channels 2 channels
Conversion Architecture 1 pipelined conversion path
Input Configuration Single-ended or differential
인터페이스 유형 DSP or microprocessor interface
Channel Control Channel autoscan
Operating Mode Low power
패키지 32-TSSOP
Package Width 6.10 mm
Package Length 6.10 mm
실장 유형 Surface mount
Terminal Count 32 terminals
Lead Form Gull wing
Package Shape Rectangular
동작 온도 범위 0C to 70C
RoHS 상태 ROHS3 compliant

THS1209CDA rectangular 핀 구성 가이드

THS1209CDA(rectangular 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

THS1209CDA의 rectangular 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: THS1209CDA.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

THS1209CDA 적합 용도: 6 애플리케이션s: Communications Signal Acquisition, Industrial Process Monitoring, Medical Instrumentation, Waveform Data Acquisition, Control-System Feedback, Portable Sensor Hub.

🌐

Communications Signal Acquisition

The THS1209CDA fits communications front ends that require two analog channels sampled at up to 8 MSPS. Its 12-bit conversion resolution preserves approximately 4096 code levels, while the dual-channel architecture supports paired I/Q, differential, or feedback measurements in a compact 32-TSSOP footprint. Place the converter close to the receiver circuitry to minimize analog-trace noise, and route its digital interface away from sensitive input and reference nodes. The low-power operating characteristic can help when the acquisition subsystem has a constrained power budget, although interface timing and channel sequence must match the host processor requirements.

🏭

Industrial Process Monitoring

The THS1209CDA can acquire two related process variables at up to 8 MSPS in industrial monitoring equipment where the 0C to 70C operating range is adequate. Dual-channel operation supports comparing a sensor signal with a reference, capturing an actuator command and feedback value, or digitizing differential sensor outputs. The 12-bit resolution and pipelined operation support time-domain analysis without requiring a large parallel data bus. Engineers should use careful grounding and isolation strategies, especially when long sensor wiring or high-energy industrial equipment can inject noise into the analog inputs.

💊

Medical Instrumentation

The THS1209CDA is suitable for compact medical instrumentation that samples two low-bandwidth or burst-mode physiological signals, provided its commercial temperature range satisfies the equipment environment. Its 8 MSPS capability can capture short waveform segments, while 12-bit resolution provides a practical balance between signal fidelity, data rate, and implementation complexity. Differential input support can simplify acquisition from bridge or biopotential-style front ends. Use the manufacturer application guidance to establish reference quality, input range, isolation boundaries, and calibration procedures; clinical designs also require system-level safety and regulatory validation.

🖥️

Waveform Data Acquisition

The THS1209CDA supports waveform acquisition systems requiring two analog channels at a maximum rate of 8 MSPS. Pipelined operation helps maintain throughput while results are transferred to a DSP or microprocessor, and the compact 32-TSSOP package saves board area compared with larger parallel-interface converters. The device is appropriate for vibration, transient, and periodic-signal monitoring where a higher sampling rate captures detail that slower control ADCs would miss. Keep the analog path short, use a stable reference arrangement, and verify output coding and interface timing in the datasheet before writing acquisition software.

🔧

Control-System Feedback

The THS1209CDA can serve as the feedback converter in a digital control system that compares a command signal with a returned plant signal. Simultaneous dual-channel acquisition helps preserve the relationship between the two quantities, and the 8 MSPS sampling rate provides useful timing margin for many servo and power-control loops. The converter's low-power characteristic benefits compact embedded controllers, while the DSP or microprocessor interface allows sampled data to participate directly in a control algorithm. Confirm input range, latency, and channel-autoscan behavior against the control-loop timing budget before hardware implementation.

📱

Portable Sensor Hub

The THS1209CDA fits portable sensor hubs that need compact, dual-channel digitization without the footprint of a large parallel ADC. Its low-power operating mode and 32-TSSOP package are useful in wearable, portable instrumentation, and embedded test equipment. Two channels can support a sensor plus temperature reference, accelerometer axis pair, or differential transducer arrangement. The 8 MSPS rate allows burst sampling of fast events while the host processor handles storage or filtering. Battery-powered implementations should verify the exact supply and power-consumption figures from the manufacturer datasheet and confirm that the available temperature grade covers the product environment.

What is the Texas Instruments THS1209CDA?
The Texas Instruments THS1209CDA is a 12-bit, 8 MSPS, dual-channel pipelined analog-to-digital converter with a DSP or microprocessor interface. According to the manufacturer product information, it supports single-ended and differential inputs, channel autoscan, low-power operation, and a 32-pin TSSOP package. These features make it appropriate for data-acquisition, communications, industrial control, and embedded signal-processing systems.
What are the key specifications of THS1209CDA that engineers should know?
The THS1209CDA combines 12-bit resolution, an 8 MSPS sampling rate, two analog input channels, pipelined conversion, channel autoscan, and a DSP or microprocessor interface in a 32-TSSOP package. Texas Instruments identifies the device as a low-power dual-channel ADC. The 0C to 70C operating range covers commercial-grade applications, while exact supply voltages, input range, and power-consumption values should be taken from the manufacturer datasheet.
What is the sampling rate of THS1209CDA?
The THS1209CDA samples at up to 8 MSPS. This rate supports acquisition of rapidly changing analog waveforms and provides 125 ns between nominal sample intervals. According to the Texas Instruments product page, the converter uses a pipelined architecture and provides two analog input channels with single-ended or differential input capability. Host-processor timing should be checked against the device interface timing in the datasheet.
Where can I download the THS1209CDA datasheet PDF?
The THS1209CDA datasheet PDF is available from the linked document at https://pdf.digi-electronics.com/pdf/2579/THS1209CDA-datasheet.pdf, while the manufacturer product page is available at https://www.ti.com/product/THS1209. Use the manufacturer pin-description table and recommended application circuit when assigning PCB connections. The current ordering and quality information should also be checked on the Texas Instruments product page.
Where can I find the THS1209CDA pinout?
The THS1209CDA uses a 32-pin TSSOP package, and its pin assignments are defined in the pin-description section of the manufacturer datasheet. The official device page is https://www.ti.com/product/THS1209. Engineers should use that table for signal names, analog and digital supplies, reference connections, interface pins, and control functions before laying out or repairing a board.
Is THS1209CDA suitable for simultaneous dual-channel sampling?
The THS1209CDA is designed for dual-channel acquisition and is listed with simultaneous-sampling capability. Its two analog channels can capture paired signals while the pipelined converter operates at up to 8 MSPS. This is useful for feedback loops, differential measurements, and comparisons between related sensors. Confirm the required input architecture and valid common-mode conditions against the manufacturer datasheet for the intended circuit.
What is the difference between THS1209CDA and THS1206CDA?
The THS1209CDA is identified as a 12-bit, 8 MSPS dual-channel ADC, while the THS1206CDA is identified as a 12-bit, 4-input, pipelined converter in a 32-TSSOP package. Their shared package family makes the THS1206CDA a candidate for evaluation, but input count and internal architecture differ. Verify pin functions, acquisition timing, interface behavior, and application requirements before treating it as a direct replacement.
Is THS1209CDA the same as THS1209IDA?
The THS1209CDA and THS1209IDA are listed as having consistent terminals, package, and principal performance characteristics in a cross-reference comparison. Both are described as 12-bit, 8 MSPS, dual-channel converters in a 32-TSSOP package. A board-level substitution should still be reviewed for temperature grade, ordering suffix, and manufacturer-specific quality or lifecycle conditions.
What can replace THS1209CDA?
THS1209CDAG4, THS1209IDA, and THS1209IDAG4 are identified as close 32-TSSOP alternatives to THS1209CDA, while THS1206CDA is another same-package candidate with different input characteristics. The first three preserve the closest listed performance and terminal description. THS1206CDA changes the input count, so its pin functions and acquisition behavior require closer review before substitution.
Is THS1209CDA suitable for industrial data acquisition?
The THS1209CDA can suit industrial data-acquisition designs that need two analog channels and an 8 MSPS sampling rate, provided its 0C to 70C commercial temperature range covers the enclosure environment. Its low-power feature and DSP or microprocessor interface support embedded measurement systems. For wider-temperature operation, select a device explicitly qualified for the required temperature range and environmental requirements.
What is the best TI equivalent for THS1209CDA?
THS1209IDAG4 is the closest listed Texas Instruments alternative because it is described as a 12-bit, 8 MSPS dual-channel 32-TSSOP device with consistent terminals and performance. THS1209CDAG4 and THS1209IDA are also close candidates. Confirm ordering code, temperature grade, interface timing, and lifecycle requirements on the manufacturer product pages before releasing a replacement.
Where can I buy THS1209CDA online?
Use the Request a Quote form on this page to request current THS1209CDA availability, lot information, and delivery terms. The inquiry should include the exact MPN THS1209CDA, required quantity, and target packaging. Quote timing and stock allocation can change, so request a written confirmation before placing a production order or committing the part to a bill of materials.
What is the price of THS1209CDA?
Use the Request a Quote form on this page for the current THS1209CDA unit price and quantity pricing. The form should be submitted with the exact MPN, required quantity, and delivery location so the commercial response reflects the correct package and logistics. Pricing and inventory are quote-dependent and should not be inferred from an archived catalog figure.
What is the lead time for THS1209CDA?
The current THS1209CDA lead time should be requested through the Request a Quote form on this page. Include the required quantity, acceptable packaging, target delivery date, and shipment destination in the request. For new production programs, ask for factory lead time separately from distributor allocation time so schedule risk can be evaluated correctly.
Is THS1209CDA in stock?
Current THS1209CDA stock should be confirmed through the Request a Quote form on this page. Provide the exact MPN, quantity, and required shipping information with the inquiry. Because available inventory can include different lots or package configurations, do not treat a general availability statement as a reservation until XAIPART confirms the exact order details.

엔지니어링 참조 데이터: THS1209CDA — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose THS1209CDA when the design needs a 12-bit, 8 MSPS dual-channel ADC with single-ended or differential inputs, channel autoscan, and a DSP or microprocessor interface in a 32-TSSOP package. THS1209CDAG4 is the closest ordering alternative when the same principal performance and terminal arrangement are required but the ordering suffix differs. Select THS1209IDA or THS1209IDAG4 when a listed -40C to 85C temperature range is preferable to the THS1209CDA's 0C to 70C range. Evaluate THS1206CDA when four analog inputs are useful and its acquisition behavior can be validated against the existing board. Before substitution, verify supply voltage, reference requirements, input common-mode range, latency, output coding, interface timing, and pin functions in the manufacturer datasheet.

대체품과의 비교

파라미터 이 제품 THS1209CDAG4 THS1209IDA THS1209IDAG4 THS1206CDA
Package 32-TSSOP 32-TSSOP 32-TSSOP 32-TSSOP 32-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
ADC Resolution 12 bit 12 bit 12 bit 12 bit 12 bit
Analog Input Channels 2 channels 2 channels 2 channels 2 channels 4 inputs
Conversion Architecture Pipelined, proprietary method Pipelined, proprietary method Pipelined, proprietary method Pipelined, proprietary method Pipelined
Special Features Dual channel, low power, channel autoscan Dual channel, low power, channel autoscan Dual channel, low power, channel autoscan Dual channel, low power, channel autoscan 4 inputs, pipelined conversion

주요 차별점

  • Closest same-package ordering options preserve the complete principal performance description (vs THS1209IDAG4)
  • Commercial-temperature THS1209CDA is matched by a wider-temperature family option for industrial environments (vs THS1209IDA)
  • The four-input alternative expands channel count without changing the package family (vs THS1206CDA)

설계 노트

Use the manufacturer pin-description table and recommended application circuit as the authority for every connection. Place analog input, reference, and decoupling components close to their associated pins, and keep digital clock and data traces away from sensitive analog nodes. A continuous ground plane under the device can reduce return-path discontinuities, but analog and digital return currents should still be managed so switching currents do not flow beneath the input network.

Route the digital interface with short traces, adequate ground returns, and impedance appropriate to the host processor and clock requirements. Since the THS1209CDA converts signals at up to 8 MSPS, edge-rate harmonics can couple into the analog inputs even when the sample rate itself is modest. Avoid routing clock and serial-data lines beneath input or reference traces, and apply the manufacturer's grounding and bypass recommendations without substituting unverified component values.

Do not treat every 32-TSSOP converter as an automatic replacement. THS1206CDA is listed with four inputs rather than the THS1209CDA's two channels, so verify terminal assignments, channel sequence, acquisition mode, and interface behavior. Also confirm input range, reference voltage, supply sequencing, and temperature grade for the selected ordering suffix. These checks prevent a footprint-compatible part from creating a functional mismatch in a new or repaired board.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product listing identifies THS1209CDA as ROHS3 compliant. Other compliance characteristics are not stated.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

THS1209CDA THS1209CDA datasheet THS1209CDA datasheet pdf THS1209CDA pinout THS1209CDA specifications THS1209CDA equivalent THS1209CDA replacement THS1209CDA vs THS1206CDA THS1209 12 bit ADC THS1209CDA 32-TSSOP THS1209CDA price THS1209CDA stock Texas Instruments THS1209CDA THS1209 dual channel ADC

관련 부품 & 용어

Texas Instruments THS1209CDA THS1209 THS1209CDAG4 THS1209IDA THS1209IDAG4 THS1206CDA Analog-to-digital converter ADC Data-acquisition ADC Pipelined ADC Dual-channel ADC 12-bit resolution 8 MSPS sampling rate DSP interface Microprocessor interface Channel autoscan Differential input Single-ended input 32-TSSOP TSSOP package family Surface-mount package Low-power operation Industrial process monitoring Communications signal acquisition
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기