Texas Instruments

THS1215IDW - 12-Bit 15 MSPS ADC | Texas Instruments

부품 번호: THS1215IDW ✓ 활성
3.3 V Vdss 28-SOIC (DW), PDSO28 Package
MOQ: 1 |

THS1215IDW 개요

The Texas Instruments THS1215IDW is a 12-bit, 15 MSPS, single-channel pipelined analog-to-digital converter designed for 3.3 V operation and housed in a 28-pin SOIC package. It combines a 12-bit conversion resolution with a 15 million-sample-per-second throughput, configurable single-ended or differential input functions, an internal voltage reference, and a power-down capability for low-power systems.

An ADC is an analog-to-digital converter that samples a continuous voltage and converts it into a numeric code for processing, storage, or control. The THS1215 belongs to the pipeline ADC family, where conversion stages operate in sequence to achieve high sampling rates while maintaining 12-bit resolution. Its 28-SOIC package provides a practical option for industrial, communications, instrumentation, and embedded data-acquisition equipment that uses conventional surface-mount assembly.

Key features include a maximum sampling rate of 15 MSPS, 12-bit output resolution, and single-supply 3.3 V operation. Configurable input functions support single-ended operation, single-ended operation with offset correction, and differential operation. The converter also includes an internal voltage reference, an out-of-range indicator, and a power-down function for reducing consumption when conversions are not required.

The pipelined architecture supports 15 MSPS throughput while separating conversion into multiple stages. This is useful when sampling waveforms, digitizing sensor outputs, capturing low-frequency communications signals, or acquiring data from transducers. Because the output is presented as parallel digital data, the system must route 12 output bits from the converter to a digital processor, FPGA, or capture logic while keeping analog and digital return paths appropriately controlled.

Typical uses include industrial process monitoring, portable instrumentation, communications receivers, control loops, waveform capture, and embedded sensor interfaces. The single-channel architecture suits applications where one analog signal must be converted rapidly and the system can multiplex additional inputs externally. Industrial-temperature ordering is identified for the THS1215IDW variant.

When laying out the circuit, place the analog input, reference, and power-decoupling connections close to the device and route the parallel output bus away from sensitive input nodes. Use the pin-description table and application information in the Texas Instruments THS1215 datasheet when assigning PCB tracks, configuring input modes, and selecting external support components.

This page combines the manufacturer specifications, package details, verified drop-in options, and practical selection guidance needed to plan a THS1215IDW design. It also identifies the electrical parameters that require confirmation against the current datasheet before layout release or production purchasing.

드롭인 대체품: THS1215IDW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: THS1215IDW (동일 폼 팩터 및 풋프린트) — 차이점: Input Configuration, Package, Resolution, Supply Voltage, Architecture.

Texas Instruments
Input Configuration: Single-Ended / Single-Ended w/ Offset / Differential
Package: 28-pin SOIC (DW) wide body
Supply Voltage: 3.3 V (single supply)
비교 대상: THS1215IDW →
Texas Instruments
Input Configuration: Single-ended, single-ended with offset, or differential (Mode 1 gain = 1.0; Mode 2 gain = 0.5)
Package: 28-pin TSSOP (PW)
Resolution: 12 bits
비교 대상: THS1215IDW →

THS1215IDWG4

✅ 드롭인
📦 28-SOIC (DW)
Same 12-bit, 15 MSPS converter and 28-SOIC footprint; green/environmental-ordering designation instead of the standard industrial ordering code

📋 참조 대체품 (카탈로그에 없음)

THS1215CDWRG4

✅ 드롭인
Texas Instruments
📦 28-SOIC (DW)
12 bit · 15 MSPS · 1 · 3.3 V (single supply) · Single-Ended / Single-Ended w/ Offset / Differential · Pipelined · Single-Ended, Pseudo-Differential, Differential · Internal

가격 문의

데이터시트 보기 →

THS1215CDWRG4

✅ 드롭인
Texas Instruments
📦 28-SOIC (DW)
12 bit · 15 MSPS · 1 · 3.3 V (single supply) · Single-Ended / Single-Ended w/ Offset / Differential · Pipelined · Single-Ended, Pseudo-Differential, Differential · Internal

가격 문의

데이터시트 보기 →

THS1215IDW 최대 정격 & 전기적 특성

분해능 12 bit
샘플링 속도 15 MSPS
공급 전압 3.3 V
Number of Channels 1
Conversion Architecture Pipelined
Input Configuration Single-ended, single-ended with offset, or differential
Internal Voltage Reference Yes
Out-of-Range Indicator Yes
Power-Down Function Yes
출력 유형 Parallel digital output
Operating Voltage Class 3.3 V
Temperature Grade Industrial
패키지 28-SOIC (DW), PDSO28
Package Body Width 7.50 mm (0.295 inch)
Terminal Form Gull wing
Number of Terminals 28
실장 유형 Surface mount

THS1215IDW 7.50 mm (0.295 inch) 핀 구성 가이드

THS1215IDW(7.50 mm (0.295 inch) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

THS1215IDW의 7.50 mm (0.295 inch) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: THS1215IDW.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

THS1215IDW 적합 용도: 6 애플리케이션s: Industrial Sensor Acquisition, Waveform and Signal Capture, Communications Receiver Front End, Process Control and Monitoring, Portable Instrumented Measurement, Embedded Data Acquisition System.

🏭

Industrial Sensor Acquisition

The THS1215IDW suits industrial sensor acquisition because it combines a 12-bit conversion code with a 15 MSPS throughput on a single 3.3 V supply. Its industrial temperature grade supports equipment operating beyond typical commercial conditions. Place the converter at the transducer output, use the configurable single-ended or differential input mode, and route the parallel result into a processor or FPGA. The 28-SOIC package simplifies assembly where conventional SOIC footprints are already supported.

📺

Waveform and Signal Capture

For waveform capture, the THS1215IDW can digitize a single analog node at up to 15 million samples per second with 12-bit resolution. The pipelined architecture provides the throughput required to retain changing signal content rather than sampling it at a much lower instrument rate. Buffer the input appropriately, feed the converter from a stable reference, and capture its 12 parallel output bits in external logic. The internal voltage reference and out-of-range indicator help simplify front-end supervision.

🌐

Communications Receiver Front End

The THS1215IDW can serve as the sampling element in a communications receiver that converts an intermediate analog signal into a digital code for demodulation. Its 15 MSPS rate and 12-bit resolution suit moderate-bandwidth intermediate-frequency or baseband nodes, while the selectable differential input supports balanced receiver architectures. Keep the converter clock and parallel output bus controlled, and use a low-noise reference arrangement to avoid degrading the captured signal.

⚡

Process Control and Monitoring

In a process-control loop, the THS1215IDW can digitize a conditioned pressure, temperature, or level signal for monitoring and feedback. The 12-bit resolution provides 4096 discrete code levels, while the single-channel architecture allows an external multiplexer to service several sensor inputs. Its power-down function helps reduce activity when updates are infrequent, and the industrial temperature grade aligns with equipment operating in variable ambient conditions.

🔧

Portable Instrumented Measurement

The THS1215IDW is suitable for compact laboratory or field instruments that need a fast, low-power conversion stage. Its 3.3 V operation permits integration with 3.3 V digital logic, and the power-down capability supports battery-oriented designs that do not sample continuously. The 28-SOIC package remains easy to inspect and rework compared with very small leadless packages. Apply careful reference and analog-ground layout to preserve measurement repeatability across a temperature range.

🖥️

Embedded Data Acquisition System

The THS1215IDW can act as the front-end converter in an embedded acquisition system connected to a microcontroller, DSP, or FPGA. Its parallel 12-bit output requires a defined interface between the converter and the digital engine, including correct data-valid handling and clock timing. The 15 MSPS rate provides substantial throughput for continuous sampling, while power-down offers control over inactive periods. Validate timing margin and output-routing requirements before finalizing the board layout.

What is the resolution and sampling rate of the THS1215IDW?
The THS1215IDW provides 12-bit resolution at a maximum sampling rate of 15 MSPS. According to the Texas Instruments THS1215 datasheet, it is a single-channel pipelined converter designed for 3.3 V operation. This combination is appropriate for digitizing moderate-bandwidth analog signals when a 12-bit code and a 67 ns nominal sampling interval are required.
What input modes are supported by the THS1215IDW?
The THS1215IDW supports single-ended, single-ended with offset, and differential input functions. These configurable input modes, identified in the Texas Instruments THS1215 datasheet, allow the same converter to handle referenced and unipolar signals or differential sensor outputs. The selected mode also determines the required external input-network and level-shifting arrangements.
Where can I download the THS1215IDW datasheet PDF?
The THS1215IDW datasheet is available through the Texas Instruments product documentation and through the manufacturer-hosted document listing linked on this page. Search for THS1215 in the document title, then confirm that the document number in the footer matches the ordering code THS1215IDW. Use the manufacturer copy for final pin assignments, timing tables, and electrical-limit checks.
Where is the THS1215IDW pinout located?
The THS1215IDW pinout is shown in the pin-configuration section of the Texas Instruments THS1215 datasheet. The device uses a 28-pin SOIC package and exposes parallel digital outputs in addition to analog, reference, clock, power, and control connections. Use the pin-description table when assigning board traces because several supply and ground pins may require dedicated routing.
Can the THS1215CDW replace the THS1215IDW?
The THS1215CDW is a 28-SOIC alternative with the same 12-bit, 15 MSPS converter description, but its commercial temperature grade differs from the industrial grade of the THS1215IDW. Before substitution, verify the full operating-temperature requirement and compare the exact pinout and AC/DC timing tables. The temperature-grade difference is the principal selection concern.
When should I choose THS1215IDW instead of THS1215CDW?
Choose THS1215IDW when the equipment must operate across the industrial temperature grade, while the THS1215CDW is identified as a commercial-temperature option. Both use the 28-SOIC package and are identified as 12-bit, 15 MSPS converters. Confirm the ambient-temperature range and production requirements in the Texas Instruments ordering information before releasing the PCB.
What is the best drop-in replacement for THS1215IDW?
The THS1215IDWG4 is the closest documented same-package option because it retains the 28-SOIC footprint and is identified as a complete replacement with consistent performance and terminals. Commercial-temperature alternatives such as the THS1215CDW and THS1215CDWRG4 use the same package family but may not satisfy industrial-temperature requirements. Verify temperature grade and timing before replacing the THS1215IDW.
Can THS1215IDWG4 replace THS1215IDW without PCB changes?
Yes, the THS1215IDWG4 is identified as a complete replacement with consistent terminals, package, and main performance characteristics, so it can replace the THS1215IDW without PCB modification. Confirm ordering details and lifecycle requirements for the production build. The THS1215IPW is not used as a direct substitute because its 28-TSSOP package has a different footprint.
What is the best equivalent from another manufacturer for THS1215IDW?
No verified cross-manufacturer drop-in equivalent is established for the THS1215IDW. Its 28-SOIC footprint, 12-bit parallel output, 15 MSPS rate, and selectable analog input functions must all match exactly for a true drop-in replacement. A converter with a different pinout or interface may provide similar performance but requires board and firmware changes, so it is not a drop-in substitute.
What are the key specifications of THS1215IDW that engineers should know?
The essential THS1215IDW specifications are 12-bit resolution, 15 MSPS throughput, one analog input channel, a pipelined conversion architecture, and 3.3 V single-supply operation. It also provides single-ended or differential input selection, an internal voltage reference, an out-of-range indicator, power-down support, and a 28-SOIC package. These features define its suitability for instrumentation and embedded acquisition systems.
What can replace the THS1215IDW in a 28-SOIC design?
A verified same-footprint replacement path for the THS1215IDW includes the THS1215IDWG4, with the THS1215CDW and THS1215CDWRG4 available as 28-SOIC alternatives where commercial-temperature operation is acceptable. Check the complete pin list, temperature grade, conversion timing, and power requirements before substitution. The THS1215IPW uses TSSOP rather than SOIC and therefore requires a different PCB footprint.
Is the THS1215IDW the same as THS1215CDW?
The THS1215IDW and THS1215CDW share the same 12-bit, 15 MSPS, 28-SOIC converter platform, but they are ordered for different temperature grades. The THS1215IDW is identified as industrial grade, whereas the THS1215CDW is a commercial-grade option. They are therefore interchangeable only when the equipment's temperature requirements permit the lower grade.
Where can I buy THS1215IDW online?
Use the Request a Quote form on this page to request current THS1215IDW pricing, stock confirmation, and order handling from XAIPART. The form is the direct route for a formal quotation and current lead-time confirmation. No price or inventory commitment should be inferred from general catalog listings because availability can change.
What is the price of the THS1215IDW?
Submit the THS1215IDW manufacturer part number in the Request a Quote form on this page to obtain the current unit pricing and quantity-break structure. Commercial terms can depend on order quantity, date, and supply status. The current quote response is the authoritative commercial figure for this listing.
What is the lead time and stock status for THS1215IDW?
Current THS1215IDW availability and lead time should be confirmed through the Request a Quote form on this page. Request the required quantity, shipment destination, and target date with the inquiry. This avoids relying on a stale inventory indication when planning a production schedule or prototype build.

엔지니어링 참조 데이터: THS1215IDW — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the THS1215IDW when a design requires a 12-bit, 15 MSPS pipelined ADC in a 28-SOIC package and must operate in the industrial temperature grade. Its configurable single-ended or differential inputs, internal reference, power-down function, and out-of-range indicator support instrumented, communications, and embedded acquisition systems. The THS1215IDWG4 is the closest documented drop-in choice when the green ordering designation is acceptable. Use the THS1215CDW or THS1215CDWRG4 only when commercial-temperature operation is sufficient and the required ordering suffix is interchangeable with the procurement plan. The THS1215IPW is not a direct board-level substitute because it uses a 28-TSSOP package. Before final selection, verify the exact input range, reference voltage, timing characteristics, and temperature limits against the manufacturer datasheet.

대체품과의 비교

파라미터 이 제품 THS1215IDWG4 THS1215CDW THS1215CDWRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-SOIC (DW) 28-SOIC (DW) - same footprint 28-SOIC (DW) - same footprint 28-SOIC (DW) - same footprint
Resolution 12 bit 12 bit 12 bit 12 bit
Sampling Rate 15 MSPS 15 MSPS 15 MSPS 15 MSPS
Number of Channels 1 1 1 1
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V
Temperature Grade Industrial Industrial Commercial Commercial
Conversion Architecture Pipelined Pipelined Pipelined Pipelined
Input Functions Single-ended, offset, or differential Single-ended, offset, or differential Single-ended, offset, or differential Single-ended, offset, or differential
Internal Voltage Reference Yes Yes Yes Yes
Power-Down Function Yes Yes Yes Yes
Out-of-Range Indicator Yes Yes Yes Yes

주요 차별점

  • Industrial-temperature ordering for extended-temperature equipment (vs THS1215CDW)
  • Closest ordering option with the same electrical platform and footprint (vs THS1215IDWG4)
  • Configurable input architecture for multiple signal sources (vs THS1215CDWRG4)

설계 노트

Route the analog input and reference connections away from the 12 parallel output lines and the clock net. Place input, reference, and supply-decoupling components close to their associated device pins, and use the pin-description table in the Texas Instruments THS1215 datasheet to confirm which pins require dedicated connections. A compact analog island connected to the digital interface through a controlled return path reduces pickup from switching current.

Treat the parallel output bus as a synchronous digital interface. Confirm the converter's output timing against the acquisition device's setup and hold requirements, and use the manufacturer pin descriptions rather than general 28-pin assumptions. If the cable or PCB trace is long, buffer or otherwise condition the data, control, and clock lines. Keep the clock source clean and provide a defined return path beneath the bus.

Do not substitute the THS1215IPW directly on a THS1215IDW board because the IPW version uses a 28-TSSOP package rather than the 28-SOIC footprint. Also verify temperature grade before using the commercial-grade THS1215CDW in place of the industrial-grade THS1215IDW. Confirm input range, reference voltage, and timing values in the manufacturer datasheet for the exact ordering code.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The industrial temperature grade is identified for the THS1215IDW. Compliance declarations are not stated in the manufacturer product information accessed for this listing.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

THS1215IDW THS1215IDW datasheet THS1215IDW datasheet pdf THS1215IDW pinout THS1215IDW specifications Texas Instruments THS1215IDW THS1215IDW 12-bit 15 MSPS THS1215IDW 28-SOIC footprint THS1215IDW drop-in replacement THS1215IDW vs THS1215CDW THS1215IDW equivalent ADC THS1215IDW price THS1215IDW stock THS1215IDW application circuit

관련 부품 & 용어

Texas Instruments THS1215IDW THS1215IDWG4 THS1215CDW THS1215CDWRG4 THS1215IPW analog-to-digital converter ADC pipelined ADC 12-bit resolution 15 MSPS sampling rate 3.3 V power supply single-ended input differential input internal voltage reference power-down function out-of-range indicator parallel digital output 28-SOIC surface mount industrial temperature grade sensor acquisition process control communications receiver waveform capture
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기