TMS320C31PQA50 - 50MHz Floating-Point DSP | Texas Instruments
부품 번호: TMS320C31PQA50 ✗ 단종TMS320C31PQA50 개요
A digital signal processor is a specialized semiconductor that executes filtering, Fourier analysis, control, and waveform-processing algorithms with predictable real-time performance. The TMS320C3x architecture combines a floating-point digital signal processor with parallel execution resources and external memory interfaces, positioning it within the broader digital signal processor, embedded processor, and integrated-circuit hierarchy.
The processor's 50 MHz operating rate corresponds to a 40 ns instruction-cycle time and provides 275 MOPS, 50 MFLOPS, and 25 MIPS. Its arithmetic performance makes it suitable for industrial control, communications, instrumentation, audio, and embedded signal-processing systems where deterministic floating-point computation is useful. The device supports both floating-point and integer operations, while its 32-bit architecture provides a broad numeric range for algorithms requiring fractional values or greater dynamic range.
The TMS320C31PQA50 is identified as an obsolete Texas Instruments product. Designers should therefore treat replacement planning as an essential part of product maintenance. Because equivalent processors can differ in instruction timing, memory architecture, peripherals, boot behavior, and software compatibility, any second-source or upgrade decision must include software validation and complete hardware timing checks rather than relying on package similarity alone.
Typical applications include real-time filtering, digital control loops, communications signal processing, spectral analysis, vibration analysis, and industrial measurement systems. The 132-pin BQFP package exposes the processor's external memory and parallel system interfaces while supporting straightforward multilayer-board assembly and inspection.
Design work should begin with the manufacturer's pin-description table and the TMS320C31 data sheet. Confirm clock requirements, memory-device timing, reset behavior, peripheral pin assignments, and supported development tools before layout release. Treat the 50 MHz clock and 40 ns instruction-cycle figure as the principal performance baseline, and verify all peripheral timing against the selected external memory and I/O devices.
This product page consolidates the confirmed processor identity, package, clock rate, throughput, lifecycle status, and comparison candidates into an engineering-focused reference. It also identifies where package data alone cannot establish drop-in compatibility, helping designers distinguish potential candidates from verified replacements before committing to a redesign.
드롭인 대체품: TMS320C31PQA50 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: TMS320C31PQA50 (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Instruction Cycle Time, Package Type.
TMS320C32PCM50
✅ 드롭인가격 문의
데이터시트 보기 →TMS320C32PCMA50
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TMS320C31PQA40
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →TMS320C31PQM40
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TMS320C30PQA50
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TMS320C31PQA50 사양
| Device Type | 32-bit floating-point digital signal processor (DSP) |
| Processor Family | TMS320C3x |
| Clock Frequency | 50 MHz |
| Instruction Cycle Time | 40 ns at 50 MHz |
| MIPS Rating | 25 MIPS at 50 MHz |
| MOPS Rating | 275 MOPS at 50 MHz |
| MFLOPS Rating | 50 MFLOPS at 50 MHz |
| Data Word Width | 32 bit |
| Arithmetic Support | Floating-point and integer arithmetic |
| Package Type | 132-pin BQFP |
| Package Body Size | 24.13 mm x 24.13 mm |
| 실장 유형 | Surface mount |
| Product Status | Obsolete |
| Manufacturer | Texas Instruments |
TMS320C31PQA50 24.13 mm x 24.13 mm 핀 구성 가이드
TMS320C31PQA50(24.13 mm x 24.13 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: TMS320C31PQA50.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TMS320C31PQA50 적합 용도: 6 애플리케이션s: Industrial Digital Control, Digital Filtering and Equalization, Spectrum and Vibration Analysis, Communications Signal Processing, Precision Instrumentation, Audio and Waveform Processing.
Industrial Digital Control
TMS320C31PQA50 is suited to industrial control loops that require deterministic floating-point computation at 50 MHz. Its 40 ns instruction cycle, 25 MIPS throughput, 50 MFLOPS, and 275 MOPS provide substantial arithmetic capacity for proportional-integral-derivative control, state estimation, and real-time compensation. The processor can sit beside external memory and interface logic while executing control algorithms with fixed timing constraints. For an existing TMS320C31 control platform, retaining this device minimizes firmware and board-validation effort, although its obsolete lifecycle status makes obsolescence planning essential.
Digital Filtering and Equalization
TMS320C31PQA50 can implement real-time FIR and IIR filtering, adaptive equalization, and noise-reduction algorithms in audio, communications, and instrumentation systems. Its floating-point arithmetic supports fractional coefficients and dynamic range, while the 275 MOPS rating provides headroom for multiply-accumulate-heavy filter sections. External memory and the 132-pin BQFP interface allow the processor to work with sampled data and control registers. Engineers should benchmark the complete filter under worst-case data traffic because memory wait states and interrupt handling can reduce effective throughput below the headline 25 MIPS rating.
Spectrum and Vibration Analysis
The 50 MHz floating-point architecture of TMS320C31PQA50 supports spectral analysis, vibration monitoring, and other measurement tasks requiring rapid numerical transforms. Its 50 MFLOPS rating provides useful capacity for multiply-accelerate operations involved in FFT-based processing, while 32-bit floating-point arithmetic simplifies scaling. A practical system would pair the DSP with external data acquisition and memory, transferring blocks through its parallel system interface. Validate numerical output, scaling, and update latency using representative sample rates before using the obsolete processor in a new production design.
Communications Signal Processing
TMS320C31PQA50 can serve as the real-time processing engine in communications equipment performing modulation, demodulation, channel filtering, symbol timing, and spectral shaping. Its 32-bit floating-point format supports dynamic-range-intensive arithmetic, and the 50 MHz clock permits 40 ns instruction-cycle timing for deterministic loop execution. The processor's external-memory capability is useful when working buffers and coefficient tables exceed practical on-chip requirements. Interface timing, bus contention, and peripheral pin differences must be checked carefully against the selected transceiver and memory devices.
Precision Instrumentation
TMS320C31PQA50 is appropriate for precision measurement systems that combine acquisition, calibration, filtering, and numeric conversion. Its floating-point execution helps maintain numerical consistency across wide operating ranges, and the 25 MIPS throughput supports real-time sample processing when paired with suitable external converters and memory. The 132-pin BQFP package provides access to the processor's broad peripheral set but requires careful multilayer routing and fanout. Because lifecycle is a major concern for long-lived laboratory and industrial equipment, plan a tested redesign path alongside any maintenance purchase.
Audio and Waveform Processing
TMS320C31PQA50 can perform real-time audio filtering, mixing control, dynamic-range processing, and waveform generation where floating-point behavior simplifies gain and coefficient management. At 50 MHz and 50 MFLOPS, the processor offers enough throughput for many multichannel algorithms, depending on memory traffic and interrupt frequency. Use external memory for large sample buffers and keep critical timing paths short and well terminated. Because the product is obsolete, new consumer-facing audio equipment should normally use a currently supported processor, while the TMS320C31PQA50 may remain practical in proven legacy equipment.
엔지니어링 참조 데이터: TMS320C31PQA50 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TMS320C32PCM50 | TMS320C32PCMA50 | TMS320C31PQA40 | TMS320C31PQM40 | TMS320C30PQA50 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 132-pin BQFP | 132-pin BQFP | 132-pin BQFP | 132-pin BQFP | 132-pin BQFP | 132-pin BQFP |
| Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 40 MHz | 40 MHz | 50 MHz |
| Data Word Width | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit | 32 bit |
| Arithmetic Type | Floating-point and integer arithmetic | Floating-point and integer arithmetic | Floating-point and integer arithmetic | Floating-point and integer arithmetic | Floating-point and integer arithmetic | Floating-point and integer arithmetic |
주요 차별점
- Known 50 MHz operating point with published throughput (vs TMS320C31PQA40)
- Established TMS320C31 platform for maintenance designs (vs TMS320C32PCM50)
- Full 50 MHz clock capability (vs TMS320C31PQM40)
- Newer C3x-family migration candidate within the same manufacturer portfolio (vs TMS320C30PQA50)
설계 노트
Do not treat a matching 132-pin outline as proof of drop-in equivalence. Before replacing TMS320C31PQA50, compare every pin name, alternate function, power domain, input threshold, output impedance, clock specification, reset state, and interrupt connection against the original design. Package mechanics are only one part of compatibility; software initialization and peripheral behavior must also be validated on the target PCB.
Route the 132-pin BQFP with short escape paths, a continuous ground reference, and deliberate separation between clock, memory, and peripheral interfaces. Place external-memory and decoupling components close to their associated pins, and use the manufacturer's pin table to keep power and ground returns adjacent where possible. Inspect the assembled package for solder bridging because the fine pitch leaves limited room for rework.
Validate all external-memory and parallel-interface timing at the maximum intended 50 MHz operating condition, including board-insertion and temperature effects. The processor's 40 ns instruction cycle does not remove external bus wait-state requirements. Use receiver thresholds, drive-strength assumptions, and propagation-delay budgets from the manufacturer data sheet rather than relying on nominal logic-family timing.
Estimate the processor's board-level heating from its actual switching activity, supply voltage, and operating frequency rather than using a catalog power figure alone. Provide continuous ground-plane area beneath the BQFP, minimize thermal impedance through the board stack-up, and evaluate the enclosure's temperature rise at the highest sustained processor load. Confirm junction-temperature limits and airflow requirements from the manufacturer data sheet.
규정 준수 정보
The product is an obsolete general-purpose DSP. Automotive qualification and environmental compliance declarations are not confirmed for this orderable MPN.