TMS320C52PZ - 16-Bit 100 MHz DSP | Texas Instruments
부품 번호: TMS320C52PZ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
TMS320C52PZ 개요
A digital signal processor is a specialized microprocessor architecture optimized for arithmetic-intensive algorithms. Its hardware multipliers, parallel processing capabilities, and deterministic execution allow filtering, Fourier analysis, speech processing, and control loops to run faster than general-purpose software approaches. In the product hierarchy, the TMS320C52 belongs to the Texas Instruments TMS320 C5x DSP family and provides an upgrade path for designs requiring more processing capability than earlier C2x and C3x devices.
The verified data identifies the CPU as 16-bit floating-point and specifies a 100 MHz clock, 50 MIPS throughput, and a 100-pin LQFP package. The processor's single-cycle 16-bit multiply/accumulate operation is especially important for recursive filters and other DSP kernels that repeatedly perform multiply and add sequences. Its architecture can reduce instruction count compared with software implementations that use general-purpose processors.
The TMS320C52 family operates from a 5 V supply at 25 ns, 35 ns, or 50 ns instruction-cycle ratings and from a 3 V supply at 25 ns, 40 ns, or 50 ns ratings, as reported in the manufacturer datasheet excerpt. The verified product summaries also identify 16-bit processing and 50 MIPS performance, making the device relevant to industrial control, communications, audio, instrumentation, and embedded signal-processing systems.
Designers should preserve the established LQFP-100 footprint and verify every signal, supply, and timing requirement against the complete manufacturer datasheet before layout or firmware migration. TMS320C52PZ is an older architecture, so long-term availability, software-tool compatibility, and required peripheral behavior must be confirmed for production programs.
This page combines verified distributor and manufacturer-linked source information with practical selection guidance, package constraints, and application context. It distinguishes exact drop-in alternatives from merely functional DSP options, helping engineers make procurement and redesign decisions without overlooking footprint, firmware, and lifecycle risks.
드롭인 대체품: TMS320C52PZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
TMS320DM642AGNZ5
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TMS320C6455BCTZ2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TMS320C52PZ 사양
| Product Type | Digital Signal Processor (DSP) |
| CPU Architecture | 16-bit TMS320C5x |
| Arithmetic Type | 16-bit floating-point |
| Clock Frequency | 100 MHz |
| Instruction Throughput | 50 MIPS |
| Multiplier Architecture | Single-cycle 16-bit multiply/accumulate |
| Maximum Addressable Memory | 16-bit |
| 패키지 | 100-pin LQFP |
| 실장 유형 | Surface Mount |
| 5 V Instruction Cycle Options | 25 ns, 35 ns, and 50 ns |
| 3 V Instruction Cycle Options | 25 ns, 40 ns, and 50 ns |
| 5 V Operating Condition | 5 V operation |
| 3 V Operating Condition | 3 V operation |
| Datasheet Publication Date | 1998-11-11 |
| 카테고리 | Digital Signal Processors (DSPs) |
TMS320C52PZ 100-pin lqfp 핀 구성 가이드
TMS320C52PZ(100-pin lqfp 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: TMS320C52PZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TMS320C52PZ 적합 용도: 6 애플리케이션s: Digital Filtering, Audio Signal Processing, Industrial Control, Communications Signal Processing, Spectrum Analysis, Vibration and Sensor Processing.
Digital Filtering
The TMS320C52PZ fits real-time filter implementations because its 16-bit TMS320C5x CPU executes a 16-bit multiply/accumulate in one cycle and supplies 50 MIPS throughput. FIR and IIR routines can process samples continuously while retaining precise floating-point scaling and coefficient control. Designers should place program and working data in memory optimized for the processor's access timing, then verify synchronous timing against the 100 MHz operating assumption. The benefit is reduced instruction overhead compared with a general-purpose processor; the trade-off is that software must be tuned for the DSP architecture and available memory bandwidth.
추천
Audio Signal Processing
The TMS320C52PZ can implement audio-channel filtering, mixing, analysis, and modulation where real-time arithmetic and 16-bit floating-point precision are important. Its 50 MIPS throughput and single-cycle multiply/accumulate operation support sample-by-sample algorithms without relying on a large general-purpose CPU core. The processor is particularly relevant to legacy industrial audio and communication equipment that already uses the TMS320C5x architecture. Design work must account for external interface timing, memory latency, and clock-compatible peripherals; a modern redesign may gain peripherals but require software, bootloader, and board changes.
추천
Industrial Control
The TMS320C52PZ fits supervisory and feedback loops that benefit from deterministic multiply/accumulate performance, particularly motor, vibration, and adaptive-control algorithms. At 100 MHz and 50 MIPS, one 16-bit multiply/accumulate per cycle can accelerate recursive estimators and controller kernels, while floating-point arithmetic simplifies coefficient tuning. Existing C5x-based industrial control boards can retain their processor and peripheral ecosystem. For new designs, verify interrupt latency, external memory behavior, and isolation requirements; a newer DSP should be selected only after confirming that its instruction set, development tools, and board resources meet the control-loop specification.
추천
Communications Signal Processing
The TMS320C52PZ is applicable to legacy communications equipment requiring real-time filtering, modulation, spectral processing, and protocol-adjacent DSP work. Its 16-bit floating-point arithmetic supports numeric flexibility, while the single-cycle multiplier and 50 MIPS throughput improve the execution rate of convolution and recursive operations. A legacy communications design can preserve its established 100-pin LQFP board and TMS320C5x code base. Before upgrading the processor, verify serial-port timing, DMA behavior, memory-map assumptions, and boot ROM expectations; newer communications DSPs should be treated as complete platform migrations rather than direct replacements.
추천
Spectrum Analysis
The TMS320C52PZ can support FFT-based spectral analysis and related instrumentation algorithms because its single-cycle multiply/accumulate capability accelerates butterfly operations and the 16-bit floating-point format improves numerical flexibility. The 100 MHz, 50 MIPS processor is suitable for embedded measurement products requiring predictable sampling-to-result latency. System designers should account for input-converter bandwidth, table and buffer memory, numerical scaling, and external memory throughput. The device remains attractive for preserving certified or field-proven firmware, but new wideband instruments should compare converter bandwidth, spectral performance, and software-tool support with current DSP platforms.
추천
Vibration and Sensor Processing
The TMS320C52PZ suits embedded vibration monitoring and sensor-processing systems that must filter samples, estimate parameters, and detect events in real time. Its 16-bit multiply/accumulate path accelerates FIR and IIR operations, while floating-point arithmetic supports adaptive coefficients and scaled sensor data. An existing acquisition board can therefore process data locally without adding a separate processor. Engineering checks include input-signal bandwidth, anti-alias filter design, memory bandwidth for sample buffers, and deterministic scheduling. New sensor nodes may benefit from more integrated low-power peripherals, but those alternatives require schematic and firmware qualification rather than an assumed drop-in substitution.
추천
추천 제품 요약
엔지니어링 참조 데이터: TMS320C52PZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TMS320DM642AGNZ5 | TMS320C6455BCTZ2 |
|---|---|---|---|
| Package | 100-pin LQFP | 100-pin LQFP | 100-pin LQFP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Clock Rate | 100 MHz | 500 MHz | 500 MHz |
| Arithmetic Type | Floating-point | Fixed-point | Fixed-point |
| Core | 16-bit TMS320C5x | TMS320DM64x | TMS320C645x |
| Lifecycle Status | Active | Discontinued | Active |
| Drop-In Verification | Original device | Not verified; exact pinout and peripheral equivalence not established | Not verified; exact pinout and peripheral equivalence not established |
주요 차별점
- Floating-point DSP arithmetic (vs TMS320DM642AGNZ5)
- Lower-complexity performance target (vs TMS320C6455BCTZ2)
- Established TMS320C5x software environment (vs TMS320DM642AGNZ5)
설계 노트
Do not treat a DSP with a 100-pin LQFP outline as a drop-in replacement. The verified data shows both comparison candidates have a 500 MHz clock, fixed-point arithmetic, and different processor families, while the target uses a 16-bit floating-point TMS320C5x core. Verify every pin, power rail, boot interface, peripheral function, memory map, and timing requirement from the complete datasheets before considering either alternative; otherwise, treat the substitution as a redesign.
The manufacturer excerpt confirms both 3 V and 5 V operating options, but it does not provide complete supply-current, quiescent-current, or power-up sequencing limits. Treat the missing voltage rails as design-blocking items: map every supply and ground pin, confirm I/O-level compatibility, and use the datasheet's decoupling recommendations. Do not infer that equal package pin counts imply identical power architecture or safe sequencing between the C52PZ and newer candidates.
Preserve the original TMS320C52PZ land pattern only after checking the package drawing, exposed-pad treatment, pin-one orientation, and solder mask. For a legacy product, compare the manufacturer package drawing mechanically with the assembled PCB and existing solder mask; LQFP pad geometry can vary even when the nominal pin count is 100. Also inspect via-in-pad, solder wicking, and adjacent-pin clearance before committing a new board revision.
The available data does not state the C52PZ junction-temperature limit, package thermal resistance, or processor power dissipation. These values must be obtained from the manufacturer datasheet before conducting thermal qualification. Estimated: total dissipation equals operating current multiplied by core voltage plus I/O and support-rail dissipation, but the necessary current values are unavailable here, so no defensible temperature-rise estimate can be made without them.
규정 준수 정보
The supplied verified excerpts do not contain environmental-compliance or automotive-qualification statements. No compliance claim has been inferred.
