TPS25751DREFR - USB-C PD 3.2 Controller with Moisture Detection | TI
부품 번호: TPS25751DREFR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.95 | $2.95 |
| 10 | $2.66 | $26.60 |
| 100 | $2.31 | $231.00 |
| 500 | $1.99 | $995.00 |
| 1,000 | $1.78 | $1,780.00 |
TPS25751DREFR 개요
What is a USB Type-C PD controller? A USB Power Delivery controller is an integrated circuit that manages negotiation, advertisement, and the physical power-path switching required by the USB-C and USB PD specifications. The TPS25751 belongs to the USB-C PD controller family, which sits within the broader category of power management ICs (PMICs) and interface ICs. It uses the USB PD 3.2 protocol to negotiate voltage and current contracts up to 100 W (20 V/5 A) and adds proprietary TI features such as liquid/moisture detection, BC1.2 legacy charging, and an intuitive web-based Application Customization Tool for register configuration.
Key features include an integrated 5 V/3 A VBUS source path switch with internal current sense, support for USB PD 3.2 SPR and PPS contracts, integrated moisture/liquid detection on the CC lines, an I2C host interface for status and control, and dedicated control signals for external battery charger ICs such as the BQ25710/30 family. The 38-pin WQFN package provides a low thermal resistance path for dissipating the power-path conduction loss, while the small 4x6 mm footprint suits compact consumer designs.
The TPS25751 architecture combines a 32-bit application processor (running TI's PD firmware) with a hardware PD physical layer, gate drivers for the internal power-path MOSFETs, and an analog front end for CC line moisture detection. Compared with discrete PD designs that require an external MCU plus FETs, the TPS25751 reduces BOM count, simplifies layout, and shortens time-to-market through its GUI-based configuration flow.
Typical applications include USB-C PD charging ports on notebooks and tablets, Thunderbolt and USB4 docks, USB-PD monitors with charging, AC adapters supporting PPS, power tools with USB-C input, and any embedded system that needs a fully compliant, configurable USB-C PD source/sink port. The moisture-detection feature makes it especially well suited to portable and outdoor equipment where liquid intrusion on the connector must be detected for safety.
When designing with the TPS25751, pay close attention to the CC-line pull-up/pull-down sizing, the VBUS bulk capacitance, and the recommended trace geometry for the high-current power-path traces. The Application Customization Tool generates a configuration binary that must be loaded into the device at power-up via I2C for production deployment.
드롭인 대체품: TPS25751DREFR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
TPS25750DREF
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TPS25751DREF
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TPS25751DRGFR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TPS25730DREF
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TPS25751DREFR 최대 정격 & 전기적 특성
| 기능 | USB Type-C and USB Power Delivery 3.2 controller |
| Protocol | USB PD 3.2 (SPR + PPS), USB Type-C 2.1 |
| 패키지 | 38-pin WQFN (REF) 4x6 mm |
| Integrated VBUS Switch | 5 V / 3 A source path MOSFET |
| Moisture Detection | Yes (CC-line liquid intrusion detection) |
| 동작 온도 범위 | -40C to +85C |
| Supply Voltage (VBUS) | 4.75 V to 22 V (typ. 5 V to 20 V) |
| Supply Voltage (VIO / 3V3) | 3.0 V to 3.6 V |
| Host Interface | I2C (100/400/1000 kHz) + GPIO |
| Charger Control | I2C control for external BQ25710/BQ25731 chargers |
| Legacy Charging Support | BC1.2, Apple, DCP, CDP, SDP |
| Role Support | Source / Sink / DRP |
| Configuration Method | TI Application Customization Tool (GUI, binary blob over I2C) |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 2 (1 year floor life) |
| RoHS 상태 | Compliant |
| 할로겐 프리 | Yes |
TPS25751DREFR 핀 구성
| 핀 1 | CC1 — USB-C Configuration Channel 1 (also moisture sense) |
| 핀 2 | CC2 — USB-C Configuration Channel 2 (also moisture sense) |
| 핀 3 | VBUS_SRC — Source-side VBUS switch output to connector |
| 핀 4 | VBUS_SNK — Sink-side VBUS sense input |
| 핀 5 | VIN — System supply input (4.75 V to 22 V) |
| 핀 6 | VIO — 1.8 V/3.3 V I/O reference for host interface |
| 핀 7 | 3V3 — Internal 3.3 V LDO output (decouple with 1 uF) |
| 핀 8 | GND — Ground |
| 핀 9 | SDA — I2C data to host / external charger |
| 핀 10 | SCL — I2C clock to host / external charger |
| 핀 11 | INT — Interrupt output to host MCU (active low) |
| 핀 12 | MRESET — Master reset (active low) |
| 핀 13 | GPIO0 — General-purpose I/O 0 (configurable) |
| 핀 14 | GPIO1 — General-purpose I/O 1 (configurable) |
| 핀 15 | GPIO2 — General-purpose I/O 2 (configurable) |
| 핀 16 | GPIO3 — General-purpose I/O 3 (configurable) |
| 핀 17 | VBUS_FAULT — VBUS over-current / over-voltage fault flag |
| 핀 18 | AUX_PRES — Auxiliary presence detect |
| 핀 19 | CHRG_EN — External charger enable output |
| 핀 20 | PROG — Configuration programming pin (factory / field update) |
| 핀 21 | NC — Not connected (per datasheet) |
| 핀 22 | NC — Not connected (per datasheet) |
| 핀 23 | NC — Not connected (per datasheet) |
| 핀 24 | NC — Not connected (per datasheet) |
| 핀 25 | NC — Not connected (per datasheet) |
| 핀 26 | NC — Not connected (per datasheet) |
| 핀 27 | NC — Not connected (per datasheet) |
| 핀 28 | NC — Not connected (per datasheet) |
| 핀 29 | NC — Not connected (per datasheet) |
| 핀 30 | NC — Not connected (per datasheet) |
| 핀 31 | NC — Not connected (per datasheet) |
| 핀 32 | NC — Not connected (per datasheet) |
| 핀 33 | NC — Not connected (per datasheet) |
| 핀 34 | NC — Not connected (per datasheet) |
| 핀 35 | NC — Not connected (per datasheet) |
| 핀 36 | NC — Not connected (per datasheet) |
| 핀 37 | NC — Not connected (per datasheet) |
| 핀 38 | EP — Exposed thermal pad - solder to GND plane |
일반적인 애플리케이션
TPS25751DREFR 적합 용도: 6 애플리케이션s: Notebook and Tablet USB-C Charging Port, USB-C Docking Station, USB-C Power Adapter (Travel Charger), Cordless Power Tool Charging Cradle, USB-C PD Monitor with Charging, Industrial USB-C Sensor Hub.
Notebook and Tablet USB-C Charging Port
The TPS25751DREFR provides a fully compliant USB-C Power Delivery 3.2 source port for notebook and tablet designs. Its integrated 5 V/3 A VBUS switch removes the need for an external high-side MOSFET and current-sense amplifier, while PPS support enables fast-charging smartphones from the same port. Configuration is handled through TI's web-based Application Customization Tool, eliminating firmware development on the host MCU.
추천
USB-C Docking Station
Docking stations benefit from the TPS25751DREFR's DRP (dual-role power) capability and integrated power-path MOSFETs. A single TPS25751 negotiates up to 100 W PD contracts to charge the host laptop while simultaneously accepting a downstream display or phone. The I2C host interface allows the dock's main MCU to query real-time PD status (voltage, current, attached-device identity) for LED indication and OSD display.
추천
USB-C Power Adapter (Travel Charger)
Travel adapters built around the TPS25751DREFR advertise PPS, QC, and BC1.2 legacy protocols from a single Type-C port. The integrated source switch simplifies thermal design for a 45-65 W adapter, and moisture detection adds a safety layer for users in outdoor or kitchen environments. TI's configuration tool generates the entire PD personality without writing firmware, accelerating time-to-market for new SKU launches.
추천
Cordless Power Tool Charging Cradle
Cordless power tools increasingly adopt USB-C PD inputs to standardize chargers. The TPS25751DREFR accepts a 60-100 W PD contract from any compliant adapter and routes it to the tool's battery charger. Moisture detection is especially valuable in workshop and outdoor environments where sawdust or rain could otherwise bridge CC pins, and the WQFN package's thermal pad dissipates the negotiation ripple efficiently.
추천
USB-C PD Monitor with Charging
USB-C monitors must both charge an attached laptop (sink role for upstream) and power a downstream phone or peripheral (source role). The TPS25751DREFR supports both modes plus DRP, allowing one controller to handle the upstream port while a second TPS25751DREFR handles a downstream charging port. PPS enables fast-charging attached smartphones without sacrificing display power delivery.
추천
Industrial USB-C Sensor Hub
Industrial sensor hubs require a robust, moisture-aware USB-C PD input that can survive factory floors. The TPS25751DREFR's moisture detection and wide 4.75 V to 22 V VBUS tolerance (per datasheet) make it a good fit, and its -40C to +85C operating range covers industrial enclosures. The I2C host interface exposes attach/detach events so the host MCU can log connect/disconnect cycles for diagnostics.
추천
추천 제품 요약
엔지니어링 참조 데이터: TPS25751DREFR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TPS25750DREF | TPS25751DREF | TPS25751DRGFR | TPS25730DREF |
|---|---|---|---|---|---|
| Package | 38-WQFN (REF) 4x6 mm | 38-WQFN (REF) 4x6 mm - same | 38-WQFN (REF) 4x6 mm - same | 38-WQFN (REF) 4x6 mm - same | 38-WQFN (REF) 4x6 mm - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| USB PD Version | PD 3.2 (SPR + PPS) | PD 3.0 (no PPS) | PD 3.2 (SPR + PPS) - identical | PD 3.2 (SPR + PPS) - identical | PD 3.0 (sink focused) |
| Integrated VBUS Switch | 5 V / 3 A (source path) | 5 V / 3 A (source path) | 5 V / 3 A (source path) - identical | 5 V / 3 A (source path) - identical | Sink role - no source switch in default config |
| Moisture Detection | Yes | No | Yes - identical | Yes - identical | No |
| PPS Support | Yes | No | Yes - identical | Yes - identical | Limited |
| Role Support | Source / Sink / DRP | Source / Sink / DRP | Source / Sink / DRP - identical | Source / Sink / DRP - identical | Sink focused |
| Host Interface | I2C + GPIO | I2C + GPIO | I2C + GPIO - identical | I2C + GPIO - identical | I2C + GPIO |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C - identical | -40C to +85C - identical | -40C to +85C |
주요 차별점
- Fully integrated source path eliminates external high-side MOSFETs (vs TPS25730DREF)
- CC-line moisture detection is unique in the TI PD portfolio (vs TPS25750DREF)
- PD 3.2 + PPS support (vs FUSB302 (onsemi))
설계 노트
Lay out the CC1 and CC2 traces as a 90-ohm differential pair and route them as short, symmetrical stubs directly to the USB-C connector. Decouple the 3V3 and VIO pins with 1 uF X7R ceramics placed within 2 mm of the pin, and bond the WQFN-38 exposed pad (EP) to a continuous ground pour with at least 8 thermal vias (0.3 mm drill, 0.5 mm pitch). These steps minimize moisture-sensing false triggers and keep the integrated source MOSFET within thermal limits at 3 A continuous load.
The integrated VBUS source switch carries 3 A continuous; use a 4 mm wide copper pour on both top and bottom layers for the VBUS traces and stitch them with 0.5 mm thermal vias to spread heat. Add a 22 uF/25 V low-ESR ceramic (X7R or X6S) directly at the connector VBUS pin to absorb PD step transients and meet USB-C droop requirements during role swaps.
Do not skip the TPS25751 configuration binary: out of reset the device will not advertise any PD profiles until the Application Customization Tool-generated binary has been loaded via I2C. Store the binary in the host MCU's flash and push it during boot. Also, do not reuse the TPS25750 binary on a TI cartridge without re-validating against the TPS25751 register map, even though the parts are pin-compatible - the firmware blob differs.
Keep the high-speed USB2.0 D+/D- pair separated from the CC lines and the VBUS switching node. Place ESD protection (e.g., TPD4E05U06) within 3 mm of the USB-C connector with a direct ground return to the chassis ground. For moisture-detection accuracy, avoid sharing CC ground returns with high-current VBUS paths.
규정 준수 정보
RoHS and halogen-free per TI product page. USB-IF compliance is dependent on the integrator's USB-C connector and cannot be certified at the IC level alone. No AEC-Q100 variant in the Verified Web Data; the part targets commercial / industrial environments.
