USB2224-NE-05 USB 2.0 Flash Media Controller | SMSC
부품 번호: USB2224-NE-05 ✗ 단종USB2224-NE-05 개요
USB flash media controllers are interface ICs within the broader USB interface and system-controller hierarchy. They coordinate USB data transfer, media access, and command handling while allowing a storage module or reader to appear as a conventional USB storage device. The bus-powered description indicates that the controller is intended for designs operating from USB power, where system power consumption, enumeration behavior, and the ability to operate across multiple host ports are important design considerations.
The available product identification confirms the USB 2.0 flash media function and the SMSC origin of the USB2224-NE-05. Detailed electrical ratings, internal controller architecture, supported media formats, operating-temperature limits, and package dimensions require confirmation from the manufacturer datasheet. Those parameters should be checked before selecting the device for a new design or preparing a PCB footprint.
Typical design roles include USB card readers, portable flash-memory adapters, embedded data-logging systems, industrial storage peripherals, and USB-connected media-access equipment. In each case, the controller must be paired with the appropriate flash-memory device or media interface, power-supply network, USB data-path routing, and required external components shown by the manufacturer.
The most important design step is to verify the exact USB signaling requirements of the target port and the media architecture. USB 2.0 operation requires careful differential-pair routing, controlled impedance, adequate ESD protection, and connector placement that minimizes noise coupling. Power should be designed for the bus-powered operating mode, including the device-state transitions expected during enumeration and media access.
For replacement work, engineers should compare the exact package, pin assignment, USB electrical characteristics, supported media, power requirements, and firmware or driver expectations. A part that shares the product description but differs in pinout or media support is not automatically a drop-in replacement. This page organizes the confirmed part identity, sourcing information, application guidance, and comparison framework for engineering review.
드롭인 대체품: USB2224-NE-05 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: USB2224-NE-05 (동일 폼 팩터 및 풋프린트).
USB2227-NU-05
✅ 드롭인가격 문의
데이터시트 보기 →USB2224-NE-05 사양
| Manufacturer Part Number | USB2224-NE-05 |
| Original Brand | SMSC |
| Manufacturer Category | Buffers, Drivers, Receivers, Transceivers |
| Product Description | BUS POWERED USB 2.0 FLASH MEDIA |
| USB Generation | USB 2.0 |
| Power Mode | Bus powered |
| Primary Function | USB 2.0 flash media controller |
| RoHS 상태 | Not applicable |
| Lead-Free Status | Not applicable |
USB2224-NE-05 standard 핀 구성 가이드
USB2224-NE-05(standard 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: USB2224-NE-05.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
USB2224-NE-05 적합 용도: 6 애플리케이션s: USB Flash Card Reader, Portable Flash Storage Adapter, Embedded USB Storage Module, Industrial Data-Logging Accessory, USB Media Synchronization Adapter, Portable Media Reader Hub.
USB Flash Card Reader
The USB2224-NE-05 is a logical candidate for a USB 2.0 card-reader design because the manufacturer category identifies it as a bus-powered USB 2.0 flash media controller. A practical implementation would use the controller with the required flash-media interface, USB connector, ESD protection, and supporting passives. Because the available product identity does not state the supported media formats or pin assignments, the flash-device choice and PCB layout must follow the exact manufacturer documentation. The bus-powered description should guide the power-budget review, while the final operating current and external capacitance requirements must be checked before component selection.
추천
Portable Flash Storage Adapter
The USB2224-NE-05 can be evaluated for a portable storage adapter that exposes flash memory through a USB 2.0 connection. Its bus-powered operation is relevant when the adapter must draw operating energy from the USB host, reducing the need for a separate internal supply in compact designs. The controller still requires a correct USB data path, media storage device, power network, and enclosure-compatible layout. Before committing to a PCB, confirm the package, pin map, supported media architecture, and electrical limits associated with the exact ordering code.
추천
Embedded USB Storage Module
The USB2224-NE-05 is applicable to embedded systems that need a host-accessible flash storage function over USB 2.0. Such designs commonly place the controller between a USB connector and a flash-memory device, with the USB host handling enumeration and media commands. The controller’s bus-powered description supports USB-powered architectures, but the implementation must account for startup behavior, media initialization, ESD exposure, and sustained data-transfer activity. Exact voltage, current, package, and interface requirements should be established from the manufacturer datasheet before schematic capture.
추천
Industrial Data-Logging Accessory
The USB2224-NE-05 can be considered for an industrial data-logging accessory that transfers stored records from flash media to a USB host. A bus-powered USB 2.0 interface simplifies deployment where an existing host port can provide both data connectivity and operating power. The circuit must be reviewed for the controller’s exact electrical limits, the selected flash device’s requirements, connector protection, and the enclosure’s temperature range. Since the catalog description does not confirm operating-temperature limits or package details, those specifications must be resolved before the component is approved for an industrial environment.
추천
USB Media Synchronization Adapter
The USB2224-NE-05 is relevant to media synchronization devices that expose removable or embedded flash storage to a USB host. The USB 2.0 flash-media role allows a host to recognize the attached media and exchange files or records through the controller. A robust design needs deterministic USB routing, controlled-impedance differential pairs, connector-side ESD protection, and suitable storage-device decoupling. Verify whether the exact device supports the required media type and command set, and confirm the package and pinout before using the part as the basis of a new adapter.
추천
Portable Media Reader Hub
The USB2224-NE-05 can be evaluated for a portable multi-function reader that adds USB flash-media capability to a compact device. The bus-powered description supports a host-powered design, while the USB 2.0 interface provides a standard connection method for transferring files. Because a multi-function product may also contain display, power, or communications circuitry, the controller should be reviewed for launch current, suspend behavior, bus capacitance, and connector placement. Exact electrical and pin-level requirements must be obtained for the USB2224-NE-05 before integration.
추천
엔지니어링 참조 데이터: USB2224-NE-05 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | USB2227-NU-05 |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
주요 차별점
- Confirmed bus-powered USB 2.0 flash-media positioning (vs USB2227-NU-05)
- Exact ordering-code identification for procurement (vs USB2227-NU-05)
- Placement within a defined interface-controller category (vs USB2227-NU-05)
설계 노트
Route the USB differential pair as a controlled-impedance pair with closely matched length and geometry, and keep the route away from switching nodes and high-current paths. Place USB connector ESD protection at the entry point and minimize the distance between protection, connector, and controller. Verify the complete stack-up and impedance target against the manufacturer interface recommendations.
Design the power network for the bus-powered operating mode and review startup, suspend, enumeration, and media-access current together. Use the exact voltage and current limits from the manufacturer datasheet when selecting the USB power switch, decoupling capacitors, and protection components. Keep high-current return paths away from sensitive USB and media-interface routing.
Do not infer the land pattern, pin functions, supported media, or external component values from the USB2224 family name alone. Use the package drawing and pin-description table for the exact USB2224-NE-05 ordering code, then verify the selected flash device against the documented media interface. A family-level block diagram is not sufficient for PCB release.
Treat USB2227-NU-05 as a functional evaluation candidate rather than an automatic board replacement. Before substitution, compare the package dimensions, pin assignments, USB data contact, operating voltage, bus current, supported flash media, and external circuitry. Preserve the original controller only after those characteristics and the device behavior have been confirmed.
규정 준수 정보
The product listing states Not applicable for lead-free status and RoHS status, but this wording does not establish a compliant or non-compliant classification. Confirm environmental and automotive qualifications with the manufacturer before production release.