USB2228AHZS07 USB 2.0 Flash Media Controller | SMSC
부품 번호: USB2228AHZS07 ✓ 활성USB2228AHZS07 개요
An application-specific microcontroller is a specialized semiconductor optimized for a defined set of system functions rather than general-purpose software execution. Within the product hierarchy, this device belongs to the microcontroller and embedded-controller class, while its specific application places it in the flash media controller category. This integration can reduce the number of discrete components required between a USB port and a removable flash card.
The fourth-generation controller architecture identifies the USB2228 family as a dedicated USB 2.0 storage solution. USB 2.0 provides a standardized host-to-controller interface, while the integrated card functionality manages communication with supported removable flash media. The part is specifically listed by Rochester Electronics as an application-specific microcontroller from SMSC, and market listings associate the device with a 26-page manufacturer datasheet.
Designing with this controller requires attention to the USB host interface, card electrical requirements, supported media formats, embedded firmware, and the exact package dimensions. Because the device is application-specific, its operational behavior is typically determined by its internal firmware and board configuration rather than by a general-purpose processor application. Designers should preserve the reference network, clocking arrangement, power sequencing, and card-detection implementation used by the manufacturer.
Typical uses include USB flash-card readers, card-reader appliances, portable storage accessories, embedded storage gateways, and host systems that require direct access to removable flash media. In each case, the controller handles the USB-to-card interface while the surrounding circuit supplies regulated power, termination, protection, and the physical media connector.
The principal design trade-off is integration versus upgrade flexibility. A dedicated flash media controller can simplify the USB storage path, but it is less versatile than a general-purpose microcontroller. Validate the supported card types, transfer modes, firmware configuration, package land pattern, and signal-routing requirements before releasing a new PCB layout.
This product record combines the exact USB2228AHZS07 identification, manufacturer description, package-related uncertainty, verified source links, and application-oriented engineering guidance. It also separates confirmed attributes from parameters that require confirmation against the manufacturer datasheet, helping engineers plan sourcing and hardware review without obscuring unresolved design assumptions.
드롭인 대체품: USB2228AHZS07 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청USB2228AHZS07 최대 정격 & 전기적 특성
| Manufacturer | SMSC |
| Device Type | Application-specific microcontroller |
| Controller Function | USB 2.0 flash media controller |
| Controller Generation | Fourth generation |
| USB Interface | USB 2.0 |
| Integrated Card Interface | Integrated |
| Manufacturer Datasheet Length | 26 pages |
USB2228AHZS07 standard 핀 구성 가이드
USB2228AHZS07(standard 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: USB2228AHZS07.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
USB2228AHZS07 적합 용도: 6 애플리케이션s: USB Flash-Card Reader, Portable Storage Accessory, Embedded Media Gateway, Industrial USB Storage Appliance, USB Storage Test Equipment, Secure Document Transfer Device.
USB Flash-Card Reader
USB2228AHZS07 fits a USB flash-card reader because its documented role is a fourth-generation USB 2.0 flash media controller with an integrated card interface. The device can form the central bridge between a USB host and removable flash media, reducing the need for separate USB and card-control logic. The exact implementation must follow the manufacturer reference circuit for power, clocking, termination, card detection, and media-specific connections. Engineers should confirm supported card formats, bus timing, operating limits, and package dimensions before layout release.
추천
Portable Storage Accessory
A portable storage accessory can use USB2228AHZS07 when the product requires a dedicated USB 2.0 path to removable flash media. The integrated card interface is valuable in space-constrained accessories because it can consolidate functions normally divided among a USB controller, media reader, and supporting logic. Design work should include low-power startup, connector protection, card insertion detection, stable reference rails, and signal routing that preserves USB and card timing. Firmware and supported-media configuration must be verified for the intended product experience.
추천
Embedded Media Gateway
USB2228AHZS07 is appropriate for an embedded media gateway that accepts flash media through a USB-facing storage path. Its specialized flash media controller architecture can provide a focused interface without requiring a general-purpose processor to manage the USB-to-card transaction layer. The implementation should account for host enumeration behavior, media insertion and removal, power-gating coordination, and fault handling. Before board fabrication, engineers must verify the supported media set, transfer modes, pin assignments, and electrical reference design.
추천
Industrial USB Storage Appliance
Industrial USB storage appliances can use USB2228AHZS07 when a dedicated USB 2.0 flash-media interface is required inside a larger embedded system. The application-specific controller reduces the firmware burden compared with a general-purpose processor, but it places more importance on following the manufacturer's validated reference design. Designers should evaluate environmental temperature limits, ESD protection, power-loss behavior, connector mechanics, and card endurance requirements. Production release also requires confirmation of package tolerances, lifecycle status, and exact-suffix supply.
추천
USB Storage Test Equipment
USB2228AHZS07 can support a storage test fixture designed to expose a host to flash media through a dedicated USB media-controller path. Because the part is application-specific, it may simplify a repeatable test interface compared with a software-driven general-purpose USB design. The fixture still requires controlled power rails, reliable card insertion detection, protected connector routing, and a host-side test harness. Confirm the exact supported media, enumeration behavior, transfer limits, and firmware configuration to ensure that measurements reflect the intended device class.
추천
Secure Document Transfer Device
USB2228AHZS07 may be used in a document-transfer appliance that accepts approved removable flash media and exposes it through USB 2.0. A specialized media controller can provide a predictable hardware boundary between the host and the selected card interface. Security depends on the complete product architecture, including media validation, firmware behavior, connector protection, and host-side policy, rather than on the controller designation alone. Engineering review should verify supported formats, card detection, power sequencing, package layout, and recovery behavior after interrupted transfers.
추천
추천 제품 요약
엔지니어링 참조 데이터: USB2228AHZS07 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Manufacturer | SMSC |
| Device Classification | Application-specific microcontroller |
| Controller Function | USB 2.0 flash media controller |
| Controller Generation | Fourth generation |
| USB Version | USB 2.0 |
| Card Interface | Integrated |
| Manufacturer Datasheet Length | 26 pages |
주요 차별점
- Dedicated flash-media integration (vs General-purpose USB controller)
- Application-specific controller architecture (vs General-purpose application-specific microcontroller)
- Fourth-generation USB2228 positioning (vs Earlier-generation USB media controller)
설계 노트
Use the manufacturer datasheet's land pattern and reference layout when placing USB2228AHZS07. Keep USB traces short and impedance-controlled, place termination close to the relevant device pins when required, and route card-interface signals away from noisy power-conversion stages. Confirm the exact package, pin count, exposed-pad arrangement, and exposed-pad connection before releasing artwork because those details are not established by the product listing.
Design the supply network around the exact voltage and current limits listed in the manufacturer electrical-characteristics table. Provide local decoupling at each applicable power pin and keep USB and card-interface return currents within a continuous ground path. Check startup, card insertion, and maximum-load behavior with the intended regulator because the dedicated controller architecture does not eliminate the need for correct rail sequencing and transient control.
USB 2.0 edge rates make connector-to-controller routing and return-path continuity critical. Avoid stubs, test pads, and unnecessary vias on high-speed nets, and observe the manufacturer's referenced topology for series elements and routing geometry. For the removable card interface, preserve the recommended connector and signal arrangement because edge-aligned or exposed-card contacts can introduce timing and ESD risks that are separate from USB compliance.
Do not treat every USB controller as an interchangeable flash-card controller. Verify supported media types, card detection polarity, insertion timing, required firmware, supply levels, and package pin assignments against the exact USB2228AHZS07 suffix. A board with an unverified footprint can appear electrically correct while failing at card insertion, removal, or hot-plug events. Use the manufacturer reference schematic and pin table as the release checklist.
규정 준수 정보
The available product records identify the device as an SMSC application-specific USB flash media controller but do not state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.