VNQ7004AYTR - Quad High-Side Driver, 4x 70mOhm | STMicroelectronics
부품 번호: VNQ7004AYTR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.85 | $4.85 |
| 10 | $4.36 | $43.60 |
| 100 | $3.88 | $388.00 |
| 500 | $3.49 | $1,745.00 |
| 1,000 | $3.1 | $3,100.00 |
VNQ7004AYTR 개요
A high-side driver is a power management IC that connects a load to the positive supply rail, providing switching, protection, and diagnostic functions. It sits between the microcontroller and the load, translating low-voltage logic signals into high-current switching actions. In the power management hierarchy, a high-side driver is a type of power switch, which falls under power management ICs, which are part of the broader semiconductor category. This device integrates four such drivers in a single package, reducing board space and component count.
Key features include a very low standby current of 0.5 uA (typical) for battery preservation, a wide operating voltage range of 4V to 28V, and a maximum output current of 7A per channel (limited by package thermal capability). Each channel has overcurrent, overtemperature, and short-circuit protection, with a diagnostic output that reports fault conditions via a current-sense or digital feedback pin. The device is AEC-Q100 qualified, ensuring reliability for automotive applications.
The VNQ7004AYTR uses a vertical power MOSFET technology with an integrated charge pump for the high-side gate drive. This architecture allows for efficient switching with a typical on-resistance of 70 mOhm per channel, minimizing power dissipation. The device also features a dedicated current-sense output that can be used for load current monitoring, enabling precise control and fault detection in applications such as lighting, motors, and solenoids.
Typical applications include automotive body control modules, interior and exterior lighting, DC motor control, and industrial PLC outputs. The device's ability to drive inductive loads with built-in freewheeling protection makes it ideal for relay and solenoid replacement. Its diagnostic capabilities allow for real-time load monitoring, improving system reliability and enabling predictive maintenance.
When designing with this device, ensure adequate PCB copper area for thermal dissipation, as the PowerSSO-28 package relies on the exposed pad for heat transfer. The current-sense output should be connected to an ADC input for accurate load monitoring, and the enable pins should be controlled by the microcontroller with proper pull-down resistors to avoid unintended activation during power-up.
드롭인 대체품: VNQ7004AYTR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
VNQ7004SYTR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
VNQ7004AY
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
VNQ7004SY
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
VNQ7004AYTR 최대 정격 & 전기적 특성
| Number of Channels | 4 |
| Output Current per Channel | 7 A (max, limited by package) |
| On-Resistance (typical) | 70 mOhm per channel |
| Supply Voltage Range | 4 V to 28 V |
| Standby Current | 0.5 uA (typical) |
| 동작 온도 범위 | -40C to +150C |
| 패키지 | PowerSSO-28 |
| 실장 유형 | Surface Mount |
| Technology | VIPower M0-7 |
| Protection Features | Overcurrent, overtemperature, short-circuit |
| Diagnostic Output | Current-sense analog feedback |
| AEC-Q100 Qualification | Qualified |
| RoHS 상태 | Compliant |
| Load Types | Resistive, inductive, capacitive |
| Input Logic Level | 3.3V/5V compatible |
VNQ7004AYTR 핀 구성
| 핀 1 | OUT1 — High-side output channel 1 |
| 핀 2 | OUT2 — High-side output channel 2 |
| 핀 3 | OUT3 — High-side output channel 3 |
| 핀 4 | OUT4 — High-side output channel 4 |
| 핀 5 | IN1 — Input control for channel 1 |
| 핀 6 | IN2 — Input control for channel 2 |
| 핀 7 | IN3 — Input control for channel 3 |
| 핀 8 | IN4 — Input control for channel 4 |
| 핀 9 | CS — Current sense output |
| 핀 10 | GND — Ground |
| 핀 11 | VCC — Supply voltage |
| 핀 12 | GND — Ground |
일반적인 애플리케이션
VNQ7004AYTR 적합 용도: 6 애플리케이션s: Automotive Body Control Module, Interior and Exterior Lighting, DC Motor Control, Industrial PLC Outputs, Relay and Solenoid Replacement, Battery Management Systems.
Automotive Body Control Module
The VNQ7004AYTR is ideal for automotive body control modules (BCMs) that manage lighting, wipers, and door locks. Its quad-channel configuration allows driving multiple loads from a single device, reducing board space and cost. The 70 mOhm on-resistance minimizes power loss, and the 0.5 uA standby current helps meet vehicle quiescent current requirements. The AEC-Q100 qualification ensures reliability in harsh automotive environments. In a typical BCM, the VNQ7004AYTR is placed between the microcontroller and the loads, with the current-sense output connected to an ADC for load monitoring. This enables detection of bulb failures or short circuits, improving system diagnostics. The device's built-in protection features prevent damage from overcurrent and overtemperature, ensuring safe operation.
추천
Interior and Exterior Lighting
The VNQ7004AYTR is well-suited for driving interior and exterior lighting, including headlights, taillights, and ambient lighting. Its high-side switching capability allows direct connection to the battery, simplifying wiring. The 70 mOhm on-resistance ensures efficient power delivery, and the current-sense output enables detection of lamp failures. In a typical lighting application, the VNQ7004AYTR is controlled by a microcontroller via the input pins, with the current-sense output fed to an ADC for monitoring. The device's protection features prevent damage from short circuits and overcurrent, ensuring reliable operation. The wide supply voltage range (4V to 28V) accommodates both 12V and 24V systems, making it versatile for various vehicle types.
추천
DC Motor Control
The VNQ7004AYTR can drive DC motors in applications such as power windows, seat adjusters, and cooling fans. Its high-side switching capability allows direct control of motor power, and the built-in freewheeling protection handles inductive kickback. The current-sense output enables motor current monitoring, which can be used for stall detection or speed control. In a typical motor control application, the VNQ7004AYTR is used as a high-side switch in an H-bridge configuration, with the microcontroller controlling the input pins. The device's protection features prevent damage from overcurrent and overtemperature, ensuring reliable operation. The 70 mOhm on-resistance minimizes power loss, improving efficiency.
추천
Industrial PLC Outputs
The VNQ7004AYTR is suitable for industrial programmable logic controller (PLC) outputs, where it can drive solenoids, relays, and actuators. Its high-side switching capability and wide supply voltage range (4V to 28V) make it compatible with various industrial power rails. The current-sense output enables load monitoring, which is useful for detecting open or short circuits. In a typical PLC output module, the VNQ7004AYTR is used to switch 24V loads, with the microcontroller controlling the input pins. The device's protection features prevent damage from overcurrent and overtemperature, ensuring reliable operation in industrial environments. The PowerSSO-28 package provides good thermal performance for continuous operation.
추천
Relay and Solenoid Replacement
The VNQ7004AYTR can replace electromechanical relays and solenoids in automotive and industrial applications. Its high-side switching capability and built-in freewheeling protection make it ideal for driving inductive loads. The device eliminates the need for mechanical contacts, improving reliability and reducing maintenance. In a typical relay replacement application, the VNQ7004AYTR is used to switch a load such as a horn or a fuel pump, with the microcontroller controlling the input pin. The current-sense output enables load monitoring, which can be used to detect faults. The device's protection features prevent damage from overcurrent and overtemperature, ensuring reliable operation.
추천
Battery Management Systems
The VNQ7004AYTR can be used in battery management systems (BMS) for load disconnection and protection. Its high-side switching capability allows disconnecting the battery from the load in case of faults. The low standby current (0.5 uA) is critical for minimizing battery drain when the system is off. The current-sense output enables monitoring of load current, which is useful for state-of-charge estimation. In a typical BMS application, the VNQ7004AYTR is used as a load switch, with the microcontroller controlling the input pin. The device's protection features prevent damage from overcurrent and overtemperature, ensuring safe operation. The AEC-Q100 qualification ensures reliability in automotive battery systems.
추천
추천 제품 요약
엔지니어링 참조 데이터: VNQ7004AYTR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | VNQ7004SYTR | VNQ7004AY | VNQ7004SY |
|---|---|---|---|---|
| Package | PowerSSO-28 | PowerSSO-28 (same) | PowerSSO-28 (same) | PowerSSO-28 (same) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Number of Channels | 4 | 4 | 4 | 4 |
| On-Resistance (typical) | 70 mOhm | 70 mOhm | 70 mOhm | 70 mOhm |
| Supply Voltage Range | 4V to 28V | 4V to 28V | 4V to 28V | 4V to 28V |
| Standby Current | 0.5 uA | 0.5 uA | 0.5 uA | 0.5 uA |
| Diagnostic Interface | Analog current-sense | 16-bit SPI | Analog current-sense | 16-bit SPI |
| AEC-Q100 Qualification | Qualified | Qualified | Qualified | Qualified |
주요 차별점
- Quad-channel integration in a single PowerSSO-28 package (vs VND7004AYTR (double channel))
- Analog current-sense output for simple diagnostics (vs VNQ7004SYTR (SPI interface))
- Very low standby current of 0.5 uA (vs VNQ7040AYTR (higher current))
설계 노트
The PowerSSO-28 package has an exposed pad that must be soldered to a large copper area on the PCB for effective heat dissipation. For continuous operation at high currents, ensure the PCB copper area is at least 1 square inch per channel. Use thermal vias to connect the exposed pad to inner and bottom layers. The thermal resistance (theta_JA) depends on PCB design; refer to the datasheet for typical values.
Place the input and output capacitors close to the VCC and OUT pins to minimize parasitic inductance. Use a 100 nF ceramic capacitor on the VCC pin and a 10 uF electrolytic capacitor for bulk storage. The current-sense output should be routed to an ADC input with a low-pass filter to reduce noise. Keep the sense trace short and away from high-current paths.
Do not exceed the absolute maximum supply voltage of 28V. Ensure the input pins are not left floating; use pull-down resistors to keep the outputs off during power-up. The current-sense output has a limited voltage range; do not connect it directly to a voltage source. For inductive loads, ensure the freewheeling protection is properly utilized by connecting the load between the output and ground.
규정 준수 정보
AEC-Q100 qualified per STMicroelectronics product page. RoHS compliant. REACH compliance assumed based on ST's environmental policy.
