VSC7395XYV-03 5+1-Port Gigabit Ethernet Switch | Microchip
부품 번호: VSC7395XYV-03 ✗ 단종VSC7395XYV-03 개요
An Ethernet switch is a networking semiconductor that receives Ethernet frames on one or more ports and forwards them toward their destination ports using hardware address information. The VSC7395XYV-03 belongs to the Ethernet switch IC category, which sits within interface ICs, semiconductor networking components, and broader data-communication systems. Its integrated copper transceivers reduce the need for separate PHY devices when each copper link remains within its supported electrical and distance requirements.
The principal feature is the combination of five integrated tri-speed copper transceivers and one additional tri-speed RGMII/GMII interface. Each copper transceiver supports 10, 100, and 1000 Mbps operation and is identified as IEEE 802.3ab compliant in the manufacturer documentation. Nonblocking wire-speed performance allows each supported port to process traffic at its negotiated line rate without a central throughput bottleneck, provided the aggregate traffic remains within the switch fabric's design limits.
The mixed-signal architecture combines digital frame switching with analog copper transceiver functions. This integration can simplify a multilayer board by consolidating PHY and switch functionality, but it also places demanding signal-integrity, power-supply, thermal, and layout requirements on the implementation. Differential Ethernet pairs, reference clocks, reset or control signals, and power rails must be routed according to the manufacturer layout guidance. Controlled impedance and short return paths are particularly important around the 364-pin BGA device.
Typical applications include enterprise and industrial Ethernet switching, telecommunications access equipment, network-interface aggregation, industrial control networks, and embedded systems that need several copper links plus a processor-facing RGMII or GMII connection. The RGMII/GMII port can provide a high-speed parallel interface to a host processor or another switching element, while the integrated copper ports handle endpoint connectivity.
The primary design consideration is that VSC7395XYV-03 is a complex mixed-signal BGA component rather than a simple low-pin-count Ethernet PHY. Power sequencing, clock integrity, decoupling, magnetics or cable qualification, thermal management, and high-speed differential routing must be planned together. Review the manufacturer datasheet and reference design before freezing the PCB layout.
This page organizes the confirmed port, speed, protocol, package, and compliance characteristics of VSC7395XYV-03 and separates them from parameters that require a datasheet-specific engineering review. It also provides application guidance, comparison fields, and design notes to help engineers assess whether this highly integrated Ethernet switch suits a new board design or a constrained legacy redesign.
드롭인 대체품: VSC7395XYV-03 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: VSC7395XYV-03 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청VSC7395XYV-03 최대 정격 & 전기적 특성
| Product Type | Integrated Gigabit Ethernet switch with transceivers |
| Total Port Configuration | 5+1 ports |
| Integrated Copper Ports | 5 ports |
| Additional Interface | 1 tri-speed RGMII/GMII interface |
| Copper Port Speeds | 10/100/1000 Mbps |
| Ethernet Standard | IEEE 802.3ab compliant |
| Switching Performance | Nonblocking wire-speed performance |
| 패키지 | 364-BGA, 23 x 23 mm |
| 실장 유형 | Surface mount |
| Integrated Transceiver Count | 5 copper transceivers |
| Technology Category | Mixed-signal Ethernet switching semiconductor |
| Lead-Free Status | Lead free |
| RoHS 상태 | RoHS compliant |
VSC7395XYV-03 364-bga, 23 x 23 mm 핀 구성 가이드
VSC7395XYV-03(364-bga, 23 x 23 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: VSC7395XYV-03.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
VSC7395XYV-03 적합 용도: 6 애플리케이션s: Industrial Ethernet Switching, Telecommunications Access Equipment, Network Interface Aggregation, Embedded Control Equipment, Gigabit Network Gateway, Industrial Vision and Sensor Networking.
Industrial Ethernet Switching
The VSC7395XYV-03 fits industrial Ethernet equipment that needs five local copper links plus a host-facing RGMII or GMII connection. Its five integrated tri-speed transceivers support 10, 100, and 1000 Mbps, reducing the number of separate PHY components and associated board connections. The RGMII/GMII interface can connect to a controller or processor when a parallel network path is preferred. Because industrial systems may impose stringent temperature, surge, isolation, and lifecycle requirements, the final design must verify every electrical and environmental limit in the manufacturer documentation rather than treating Ethernet compliance as sufficient qualification.
추천
Telecommunications Access Equipment
The VSC7395XYV-03 is suitable for telecommunications access equipment requiring a concentrated set of copper Ethernet ports and a processor-facing parallel interface. Five integrated IEEE 802.3ab-compliant tri-speed copper transceivers support 10/100/1000 Mbps links, while nonblocking wire-speed performance helps maintain throughput across active ports. The 364-BGA implementation requires careful high-speed layout and thermal planning, however, so telecom designers should evaluate clocking, regulatory boundaries, line-card power delivery, and the manufacturer's recommended magnetics or physical-layer implementation before committing to the layout.
추천
Network Interface Aggregation
The VSC7395XYV-03 can aggregate several 10/100/1000 Mbps copper links through its nonblocking switch fabric and connect the system through the additional tri-speed RGMII/GMII port. This arrangement is useful when a host processor needs one high-speed logical network connection rather than direct management of multiple Ethernet PHYs. Design effort must focus on processor-side timing, clock source quality, buffer behavior under traffic bursts, frame-management support, and layer-one configuration. Confirm host-interface timing and supported operating modes against the complete manufacturer documentation.
추천
Embedded Control Equipment
The VSC7395XYV-03 can serve embedded control equipment that combines multiple local Ethernet endpoints with an external processor. Its five integrated tri-speed copper transceivers avoid five separate PHY packages on a space-constrained board, while the RGMII/GMII interface provides a dedicated host path. The trade-off is implementation complexity: a 364-BGA package demands dense routing, careful multilayer impedance control, robust decoupling, and thermal analysis. Firmware, startup configuration, error handling, and the exact host-interface mode should also be verified before the device is integrated into a control product.
추천
Gigabit Network Gateway
The VSC7395XYV-03 is a logical choice for a gateway that needs several Gigabit copper ports and a high-speed host interface. The five integrated transceivers support automatic tri-speed link operation from 10 to 1000 Mbps, and nonblocking wire-speed performance supports simultaneous traffic handling. A practical gateway design must still account for the physical magnetics, connector path, isolation requirements, clocking, firmware integration, and heat generated by a large mixed-signal BGA. The additional RGMII/GMII connection can reduce host processor pin burden compared with exposing every copper link directly to the processor.
추천
Industrial Vision and Sensor Networking
The VSC7395XYV-03 can connect multiple industrial vision or sensor nodes through its five tri-speed copper ports while a host processor communicates over RGMII/GMII. Supporting 10/100/1000 Mbps allows mixed-speed devices to coexist on separate links, and integrated PHYs reduce board complexity. Industrial deployments still require validation of environmental limits, isolation, grounding, surge exposure, and long-term component availability. High-speed differential routing, return-path continuity, and reference-clock quality should be addressed with the manufacturer's layout recommendations before a four-layer or multilayer PCB is finalized.
추천
추천 제품 요약
엔지니어링 참조 데이터: VSC7395XYV-03 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
설계 노트
Treat the VSC7395XYV-03 as a high-speed mixed-signal BGA design. Route all five copper transceiver channels as controlled-impedance differential pairs, preserve continuous reference planes beneath them, and minimize vias and stubs. Place the associated external network components at the locations specified by the manufacturer reference design. RGMII/GMII traces also require length and timing control, so use the documented clock topology and source-synchronous routing rules rather than relying on general Ethernet layout practice.
Plan the power network for separate analog, digital, and transceiver supply requirements identified in the manufacturer datasheet. Place bypass capacitors at the relevant supply and ground balls with very short current paths, and keep switching-regulator loops away from sensitive reference and transceiver areas. Confirm voltage limits, sequencing, current capability, and startup behavior against the complete electrical tables. These requirements are part of the 364-BGA implementation and should be closed before schematic sign-off.
Estimate worst-case device dissipation from the selected port activity, transceiver mode, supply voltage, and ambient temperature using the manufacturer's thermal model. Provide adequate exposed-BGA thermal-via coverage, a continuous ground reference, and copper spreading beneath the package where the mechanical drawing permits. Estimated dissipation must include switching and PHY activity, not only static logic power, because sustained Gigabit traffic can raise junction temperature and affect long-term reliability.
Do not treat a family-level Ethernet switch as a pin-compatible substitute for VSC7395XYV-03 without a complete ball map and interface comparison. In particular, verify power balls, ground balls, transceiver channels, reference clocks, reset and configuration pins, management interfaces, and RGMII/GMII functions. A change from the RGMII/GMII port to another host interface can alter board routing, timing, firmware, and signal integrity even when the logical Ethernet port count appears similar.
규정 준수 정보
RoHS-compliant and lead-free status are listed in the technical documentation for the exact MPN. No additional REACH, AEC-Q100, halogen-free, or conflict-minerals declaration is established.