Microchip Technology

VSC8492YJD-12 - 10GbE PHY with OTN-FEC | Microchip

부품 번호: VSC8492YJD-12 ✓ 활성
484-pin FCBGA Package
MOQ: 1 |

VSC8492YJD-12 개요

The Microchip Technology VSC8492YJD-12 is a four-channel Ethernet physical-layer transceiver supporting 6.25 Gb/s and 10 Gb/s per channel, with OTN-FEC capability, in a 484-pin FCBGA package measuring 23 mm by 23 mm. It is designed for high-performance networking equipment requiring dense, multichannel Ethernet connectivity.

An Ethernet PHY is an interface integrated circuit that converts digital data into physical-layer signals for transmission over copper or optical network media and recovers signals at the receiving endpoint. Within the product hierarchy, the VSC8492YJD-12 belongs to the Ethernet physical-layer transceiver class, then to the broader network interface IC and semiconductor categories. Its integrated FEC function supports optical-transport networking designs that require reliable high-speed links.

The four-channel architecture allows one device to address multiple 10GbE links while reducing the number of physical interface components required on a communications board. Support for both 6.25 Gb/s and 10 Gb/s operation provides flexibility for line systems operating at different rates. The listed serial, SFI, and XFI interfaces connect the PHY to an FPGA, ASIC, line card, or other digital processing element. OTN-FEC integration provides a dedicated error-management function for optical transport links.

A 484-pin FCBGA provides a substantial number of high-speed connections and power-distribution pins in a relatively compact 23 mm by 23 mm surface-mount footprint. This dense package is appropriate for multilayer boards that can preserve controlled-impedance routing for high-speed differential interfaces. Because the package has a large ball array and many signal connections, PCB escape routing, layer transitions, return-path continuity, and thermal management require deliberate planning rather than a simple two-layer layout.

Typical uses include 10GbE line cards, optical transport equipment, Ethernet aggregation systems, network-interface modules, and FPGA-based communication platforms. In an optical-transport design, the PHY can pair with a high-speed FPGA or ASIC and optical modules while using FEC to protect the physical link. In copper-based systems, the same multichannel PHY can reduce the number of PHY devices needed for dense line-card implementations, subject to the electrical requirements of each medium.

The principal design consideration is signal integrity. Keep high-speed differential routes short and impedance controlled, provide continuous reference planes, minimize stub branches, and place required decoupling and termination close to the device. Thermal and power integrity are equally important because a 484-pin BGA concentrates power and signal connections into a compact area. Use the manufacturer’s pin-description table, recommended decoupling network, and high-speed layout guidance when assigning the board netlist.

This product summary consolidates the Ethernet PHY function, channel count, supported line rates, OTN-FEC feature, package dimensions, and practical PCB considerations into a design-focused reference. It also distinguishes verified device facts from specifications that still require confirmation during component qualification and schematic review.

드롭인 대체품: VSC8492YJD-12 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

VSC8492YJD

✅ 드롭인 ⚠️ 사양 미검증
📦 484-FCBGA (23x23)
Core 4-channel PHY and OTN-FEC ratings differ by 0%; the ordering suffix differs

📋 참조 대체품 (카탈로그에 없음)

VSC8492YID

✅ 드롭인 ⚠️ 사양 미검증
📦 484-FCBGA (23x23)
Core 4-channel 6.25/10 Gb/s ratings differ by 0%; the ordering suffix differs

📋 참조 대체품 (카탈로그에 없음)

VSC8492YJD-10

✅ 드롭인 ⚠️ 사양 미검증
📦 484-FCBGA (23x23)
Core 4-channel PHY ratings differ by 0%; the numeric ordering suffix differs

📋 참조 대체품 (카탈로그에 없음)

VSC8492YID-10

✅ 드롭인 ⚠️ 사양 미검증
📦 484-FCBGA (23x23)
Core 4-channel 6.25/10 Gb/s ratings differ by 0%; the ordering suffix differs

📋 참조 대체품 (카탈로그에 없음)

VSC8492YJD-11

✅ 드롭인 ⚠️ 사양 미검증
📦 484-FCBGA (23x23)
Core 4-channel PHY ratings differ by 0%; the numeric ordering suffix differs

📋 참조 대체품 (카탈로그에 없음)

VSC8492YJD-12 사양

Product Type Ethernet physical-layer transceiver
Channel Count 4 channels
Configuration Dual/quad 10GbE PHY
Supported Data Rates 6.25 Gb/s and 10 Gb/s per channel
Maximum Data Rate 10 Gb/s per channel
FEC Feature OTN-FEC
Serial Interfaces Serial, SFI, and XFI
Package Type 484-pin FCBGA
Package Dimensions 23 mm x 23 mm
실장 유형 Surface mount
Ball Array Count 484 balls
Packaging Form Tray

VSC8492YJD-12 23 mm x 23 mm 핀 구성 가이드

VSC8492YJD-12(23 mm x 23 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

VSC8492YJD-12의 23 mm x 23 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: VSC8492YJD-12.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

VSC8492YJD-12 적합 용도: 6 애플리케이션s: 10GbE Optical Line Cards, Optical Transport Network Equipment, FPGA-Based 10GbE Communication Platforms, Ethernet Aggregation and Switching Systems, Data-Center Network Interface Cards, Network Interface and Test Modules.

🌐

10GbE Optical Line Cards

The VSC8492YJD-12 fits optical line cards requiring several high-speed Ethernet lanes within a limited board area. Its four channels support 6.25 Gb/s and 10 Gb/s per channel, while OTN-FEC adds link-error protection suited to optical transport. The PHY can connect through serial, SFI, or XFI interfaces to an FPGA or ASIC that performs framing and payload processing. A 484-ball FCBGA concentrates the required high-speed, power, and ground connections into a 23 mm by 23 mm footprint, but the design must provide continuous impedance-controlled routing, effective return paths, and verified power distribution.

🌐

Optical Transport Network Equipment

The VSC8492YJD-12 is appropriate for OTN equipment that carries multiple 10GbE-class services over optical links. Four physical channels provide a compact path from a transport ASIC to line-side optics, and the integrated OTN-FEC function supports recovery from transmission errors. The 6.25 Gb/s operating mode is useful where an optical system requires a lower line rate than 10 Gb/s. Implementation requires careful selection of reference clocks, lane equalization, termination, and transceiver configuration. High-speed differential routes should remain impedance controlled and free of unnecessary branches so that channel margin can be evaluated under the intended optical and copper conditions.

🖥️

FPGA-Based 10GbE Communication Platforms

The VSC8492YJD-12 can provide four physical-layer channels for an FPGA-based communication platform requiring high aggregate line bandwidth. Its serial, SFI, and XFI interfaces allow the PHY to pair with programmable logic that performs packet processing, FEC coordination, test generation, and traffic management. Supporting both 6.25 and 10 Gb/s per channel gives the board designer flexibility across different link profiles. The main implementation concern is simultaneous switching and high-density escape routing from the 484-ball FCBGA. The board stack-up, reference planes, power planes, and differential impedance must be established before component placement, and the complete channel should be validated with representative traffic.

🖥️

Ethernet Aggregation and Switching Systems

The VSC8492YJD-12 supports aggregation platforms that need multiple 10GbE physical interfaces close to a switching or routing ASIC. Four channels can reduce package count and board-routing overhead compared with an equivalent collection of single-channel PHYs, provided the design is balanced across all channels. The device supports 10Gb/s and 6.25Gb/s per channel and includes OTN-FEC for links requiring enhanced error handling. Designers should account for shared power-distribution limits, simultaneous full-rate traffic, clock topology, and the thermal footprint of a dense FCBGA. Placement should support short escape paths while preserving continuous reference planes and isolated high-speed and sensitive circuitry.

🖥️

Data-Center Network Interface Cards

The VSC8492YJD-12 can support high-density network interface card designs that require multiple 10GbE links per processing module. Four channels in one 484-pin FCBGA can reduce component count and simplify synchronization compared with several independent single-channel PHYs. The serial, SFI, and XFI interfaces suit FPGA or ASIC-based cards, while OTN-FEC strengthens links deployed over environments where error performance matters. Thermal design is a major consideration because the package concentrates high-speed I/O and power connections into a 23 mm by 23 mm area. Designers should distribute power through multiple planes, follow the manufacturer decoupling recommendations, and test insertion loss, jitter, and eye behavior over the complete board channel.

🔧

Network Interface and Test Modules

The VSC8492YJD-12 is suitable for compact network interface modules and test systems that need several high-speed physical channels in a limited footprint. Four 10GbE-capable channels support traffic generation, loopback, physical-layer verification, and equipment interconnection without requiring four separate PHY packages. Its OTN-FEC capability and support for 6.25 Gb/s operation broaden the available test profiles. A module implementation should account for BGA assembly yield, thermal cycling, accessible test points, and the need to bring reference clocks and configuration signals to the PHY. High-speed pairs should use the same stack-up and geometry as the production board, with compliance and impedance checks performed before functional testing.

What is the VSC8492YJD-12?
The VSC8492YJD-12 is a four-channel Microchip Ethernet PHY supporting 6.25 Gb/s and 10 Gb/s per channel. According to the Microchip product description, it provides serial, SFI, and XFI interfaces together with OTN-FEC and is packaged in a 484-pin FCBGA measuring 23 mm by 23 mm. It is intended for dense optical-transport and high-speed networking equipment.
What are the key specifications of VSC8492YJD-12 that engineers should know?
The VSC8492YJD-12 combines four Ethernet channels, operation up to 10 Gb/s per channel, 6.25 Gb/s support, OTN-FEC, and serial, SFI, and XFI interfaces. According to the Microchip product description, the device uses a 484-pin FCBGA with a 23 mm by 23 mm body. These features make it suitable for FPGA- and ASIC-connected optical-transport line cards.
Where can I download the VSC8492YJD-12 datasheet PDF?
The VSC8492YJD-12 datasheet PDF should be obtained from the Microchip product documentation for this exact ordering code. The manufacturer description confirms the device’s 484-pin FCBGA package, four-channel PHY architecture, OTN-FEC function, and supported data rates. Before schematic release, use the manufacturer pin-description table, power specifications, reference-design guidance, and package drawing for authoritative implementation details.
Where can I find the VSC8492YJD-12 pinout and package information?
The VSC8492YJD-12 pinout is assigned through the manufacturer’s 484-ball FCBGA drawing and pin-description table. Its package is a 23 mm by 23 mm surface-mount FCBGA. Because this device has 484 balls, use the official land pattern and ball-map documents rather than creating the footprint manually, and confirm every power, ground, configuration, and high-speed signal connection before PCB release.
What Ethernet data rates does VSC8492YJD-12 support?
The VSC8492YJD-12 supports 6.25 Gb/s and 10 Gb/s operation per channel across four channels. According to the Microchip product description, the device is a dual/quad 10GbE PHY with OTN-FEC. The 6.25 Gb/s mode supports lower-rate optical-transport links, while 10 Gb/s mode serves high-speed Ethernet and coherent transport interfaces.
Why is OTN-FEC important in the VSC8492YJD-12?
OTN-FEC provides forward-error correction for optical transport links, allowing the receiver to detect and correct transmission errors without relying entirely on higher-layer retransmission. The VSC8492YJD-12 integrates this function with its four-channel 10GbE PHY architecture. It is therefore particularly relevant to optical line cards, metro transport equipment, and systems where link margin must be protected.
Can VSC8492YJD-12 be used with an FPGA for 10GbE networking?
Yes, the VSC8492YJD-12 is suited to FPGA-connected 10GbE networking because it exposes serial, SFI, and XFI interfaces. Its four channels can support multiple high-speed links while the FPGA performs packet processing, framing, and system control. The interface timing, reference clocks, lane equalization, and board-level channel requirements must be matched through the manufacturer interface documentation.
What is the difference between the VSC8492YJD-12 and other VSC8492 variants?
The VSC8492YJD-12 is the exact ordering code associated with the four-channel, 6.25/10 Gb/s PHY, OTN-FEC, and 484-pin FCBGA configuration described by Microchip. Other VSC8492 family ordering codes can differ in temperature grade, qualification, or production configuration, so the suffix must be checked individually. A valid replacement must preserve the 484-ball footprint, pin functions, electrical limits, firmware requirements, and supported operating mode.
Is VSC8492YJD-12 suitable for optical transport equipment?
The VSC8492YJD-12 is suitable for optical transport equipment because it combines four 10GbE-capable channels with OTN-FEC and high-speed serial interfaces. According to the Microchip product description, it is a telecom Ethernet interface IC. It can be placed between an FPGA or ASIC and optical transport modules, subject to channel characterization, reference-clock, power-integrity, and signal-integrity requirements.
When should I choose VSC8492YJD-12 over a single-channel Ethernet PHY?
Choose the VSC8492YJD-12 when a line card requires several parallel 6.25 or 10 Gb/s links and board area is constrained. Four integrated channels can reduce the number of PHY packages and associated routing overhead compared with four single-channel devices. A single-channel PHY remains appropriate when the design needs only one link, fewer I/O resources, or a different regulatory and environmental qualification.
What is the best drop-in replacement for VSC8492YJD-12?
No alternative-brand drop-in replacement can be confirmed from the available technical information. A true drop-in replacement must use the identical 484-ball FCBGA land pattern, preserve every pin function, support the same 6.25 and 10 Gb/s modes, provide equivalent OTN-FEC behavior, and meet the original electrical and qualification requirements. Similar Ethernet PHYs are not automatically safe replacements.
What is the best alternative-brand equivalent for VSC8492YJD-12?
No alternative-brand equivalent has been established for the VSC8492YJD-12. Its 484-pin FCBGA, four-channel 10GbE PHY operation, OTN-FEC, serial, SFI, and XFI interfaces create a demanding qualification target. A candidate from another manufacturer would require board-level pin mapping, signal-rate, clocking, power, firmware, and thermal validation rather than substitution based only on the Ethernet PHY description.
Can another Ethernet PHY replace VSC8492YJD-12 without PCB changes?
Only a specifically qualified 484-ball FCBGA device with the same pin functions and electrical behavior should be considered a no-PCB-change replacement. A functionally similar dual or quad 10GbE PHY is not necessarily pin-to-pin compatible because ball assignments, reference clocks, management interfaces, lane polarity, FEC architecture, and power rails can differ. Verify the manufacturer pin map and application reference design before ordering an alternative.
Where can I buy VSC8492YJD-12 and check its current price?
Use the Request a Quote form on this page to request the current unit price, stock status, lead time, and order quantity for VSC8492YJD-12. The component is a tray-packaged 484-pin FCBGA, so large-package logistics and production scheduling should be confirmed with the supplier. The quote request should state the required quantity, delivery location, and target date.
What is the lead time for VSC8492YJD-12?
Request the current lead time through the Request a Quote form on this page. Lead time can depend on production inventory, package capacity, order quantity, and the requested delivery location. Because the VSC8492YJD-12 is a high-pin-count FCBGA in tray packaging, buyers should also confirm handling requirements and the planned date for production material rather than relying on generic semiconductor lead times.

엔지니어링 참조 데이터: VSC8492YJD-12 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the VSC8492YJD-12 when a communication board needs four 6.25 or 10 Gb/s Ethernet physical channels, OTN-FEC, and high-speed serial connectivity to an FPGA or ASIC. Its 484-ball FCBGA is appropriate for dense multilayer line cards and optical-transport equipment, provided the PCB stack-up, power network, thermal path, and high-speed channels are designed as an integrated system. A general-purpose PHY such as KSZ8081RNACA may suit a conventional single-port copper link, while KSZ8041TLI-TR and KSZ8041RNL-TR serve lower-speed network-interface roles without the same multichannel OTN-FEC positioning. The listed VSC8492 family alternatives use the same package and are the closest engineering options, but each ordering suffix must be checked for temperature grade, qualification, lifecycle, and exact configuration. Do not approve an alternative-brand device without a complete pin map, clocking, power, firmware, and signal-integrity review.

대체품과의 비교

파라미터 이 제품 VSC8492YJD VSC8492YID VSC8492YJD-10 VSC8492YID-10 VSC8492YJD-11
Package 484-FCBGA (23x23) 484-FCBGA (23x23) 484-FCBGA (23x23) 484-FCBGA (23x23) 484-FCBGA (23x23) 484-FCBGA (23x23)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package Body Size 23 mm x 23 mm 23 mm x 23 mm 23 mm x 23 mm 23 mm x 23 mm 23 mm x 23 mm 23 mm x 23 mm

주요 차별점

  • Four high-speed Ethernet channels in one package (vs KSZ8895FMQTR)
  • Integrated optical-transport FEC function (vs KSZ8081RNACA)
  • Supports both 10GbE and 6.25Gb/s line rates (vs LAN9313I-NZW-TR)
  • High-density serial connectivity (vs KSZ8041TLI-TR)

설계 노트

Treat every high-speed differential route as a controlled-impedance transmission line. Use the manufacturer’s interface layout and reference-design stack-up, maintain continuous reference planes beneath the pairs, avoid stubs and unnecessary test pads, and place termination or ESD components where they can load the signal intentionally. Validate insertion loss, return loss, jitter, and eye closure across the complete PCB channel instead of relying only on PHY simulation.

Build the power-delivery network from the manufacturer’s recommended ball assignments and decoupling network. Provide multiple low-impedance power and ground connections, place the smallest decoupling capacitors directly beneath the associated balls, and keep the high-speed return current on a continuous plane. Confirm voltage sequencing, ripple limits, and startup behavior in simulation before committing the board because a 484-ball package can create severe local current-density and transient requirements.

Estimate junction temperature from total dissipated power, package thermal resistance, board construction, and enclosure airflow before layout is frozen. Use the package thermal design information to determine whether exposed-area copper, dedicated vias, heat spreading, or chassis conduction is required. A nominal 23 mm by 23 mm package does not by itself indicate adequate cooling, and concentrated high-speed activity can make signal integrity degrade as temperature rises.

Use the manufacturer’s 484-ball FCBGA land pattern and escape-routing guidance exactly. Check ball-pitch, solder-mask definition, via-in-pad restrictions, assembly tolerances, and the compatibility of the chosen stack-up before placement. Keep clock, configuration, and management nets away from high-speed crosstalk regions where practical, and reserve test access that does not require long branches on sensitive differential pairs.

Do not substitute a generic quad 10GbE PHY solely because its headline data rate matches. A safe choice must preserve all 484 ball functions, reference-clock requirements, lane polarity, management behavior, OTN-FEC operation, power rails, and firmware support. Also verify the selected ordering suffix against temperature grade, qualification, and lifecycle requirements rather than treating nearby VSC8492 codes as automatically interchangeable.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No definitive environmental or automotive qualification statements were identified for this exact ordering code.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

VSC8492YJD-12 datasheet VSC8492YJD-12 pinout VSC8492YJD-12 datasheet pdf VSC8492YJD-12 484 FCBGA VSC8492YJD-12 equivalent VSC8492YJD-12 replacement VSC8492YJD-12 cross reference VSC8492YJD-12 price VSC8492YJD-12 stock Microchip VSC8492YJD-12 VSC8492YJD-12 10GbE PHY VSC8492YJD-12 OTN FEC VSC8492YJD-12 optical transport VSC8492YJD-12 footprint VSC8492YJD-12 application circuit

관련 부품 & 용어

Microchip Technology VSC8492YJD-12 VSC8492YJD VSC8492YID Ethernet PHY Ethernet physical-layer transceiver network interface IC telecom interface IC semiconductor OTN-FEC forward error correction 10GbE 6.25Gb/s SFI XFI serial interface 484-FCBGA FCBGA BGA surface mount optical transport FPGA ASIC line card Ethernet switching
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기