WM8770ASIFT/V - 24-Bit 8-Channel Audio Codec | Cirrus
부품 번호: WM8770ASIFT/V ✓ 활성WM8770ASIFT/V 개요
An audio codec is a semiconductor that converts digital audio data into analogue signals and, in a bidirectional design, converts analogue audio into a digital PCM stream. In the signal-processing hierarchy, the WM8770 belongs to the audio codec class, combining an audio digital-to-analogue converter, analogue-to-digital converter, volume control, serial digital interface, and supporting analogue circuitry. Its role is to connect digital audio sources or processors to analogue input and output stages while preserving a common sampling and bit-depth framework.
The primary specifications are 24-bit resolution, eight audio channels, and operation up to 192 kHz. Analogue volume control provides adjustable signal level within the codec rather than relying entirely on external attenuators. The 64-pin TQFP package offers enough pins for the multichannel analogue interfaces and digital control connections, while its surface-mount construction is suitable for compact, automated PCB assembly.
The architecture is tailored for audio systems requiring multiple simultaneous channels rather than a simple stereo codec. Serial digital audio data, analogue channels, volume control, and device configuration must be considered together when establishing the system clock, channel format, input and output routing, and analogue signal scaling. Incorrect master-clock or serial-interface configuration can prevent correct decoding even when individual analogue signals are present.
Typical uses include multichannel recording equipment, broadcast and studio audio systems, active speaker and amplifier modules, USB or network audio gateways, automotive infotainment platforms, and laboratory audio analysers. The eight-channel architecture is particularly useful where simultaneous playback, capture, monitoring, or line-level routing is required within one subsystem.
PCB design should provide a continuous ground reference, keep analogue and digital return paths controlled, place decoupling capacitors close to the supply pins, and route high-frequency digital signals away from sensitive analogue inputs. The datasheet pin-description and application circuits should be used when assigning every pin and selecting external component values.
This page combines the WM8770 family specifications with package guidance, comparison parameters, sourcing instructions, and practical integration notes. It helps engineers separate confirmed device characteristics from details that must still be checked against the latest manufacturer documentation before schematic release or production qualification.
드롭인 대체품: WM8770ASIFT/V — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
WM8770SIFT/V
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
WM8770ASIFT/V 사양
| Audio Codec Resolution | 24 bit |
| Number of Audio Channels | 8 channels |
| Maximum Sampling Rate | 192 kHz |
| Digital Audio Interface | 24-bit serial |
| Volume Control | Analogue volume control |
| 패키지 | 64-pin TQFP |
| 실장 유형 | Surface mount |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
WM8770ASIFT/V 64-pin tqfp 핀 구성 가이드
WM8770ASIFT/V(64-pin tqfp 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: WM8770ASIFT/V.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
WM8770ASIFT/V 적합 용도: 6 애플리케이션s: Multichannel Recording Equipment, Studio Monitor and Amplifier Systems, Broadcast and Studio Audio Routing, USB and Network Audio Gateways, Automotive Infotainment Audio, Test and Measurement Audio Analyzers.
Multichannel Recording Equipment
The WM8770ASIFT/V fits multichannel recording equipment because its eight channels, 24-bit resolution, and operation up to 192 kHz support several simultaneous audio paths in one codec. The device can handle digital conversion, serial audio transport, analogue volume control, and configurable channel routing within a single 64-pin TQFP. This reduces the number of separate converter packages when a recorder must capture multiple line-level or balanced inputs. System designers should still confirm the required master-clock rate, serial data format, input range, and latency before fixing the architecture.
Studio Monitor and Amplifier Systems
The WM8770ASIFT/V is suitable for studio monitoring and amplifier control systems requiring more than a basic stereo output stage. Its eight-channel architecture can support multiple monitor, auxiliary, or effect-return paths, while analogue volume control provides signal attenuation close to the codec. The 24-bit interface and 192 kHz capability are useful for high-resolution playback chains. In an active monitor design, preserve ground continuity, isolate digital routing from audio inputs, and verify the analogue output level against the amplifier’s input sensitivity.
Broadcast and Studio Audio Routing
The WM8770ASIFT/V can serve as the central audio conversion element in broadcast consoles, studio routers, and production monitoring equipment. Eight channels and 24-bit operation allow multiple synchronized audio streams to share a consistent conversion path, while analogue volume control supports direct signal management. The device is particularly relevant where system complexity makes several discrete stereo codecs less attractive. Integration requires careful review of the master clock, serial framing, channel mapping, and grounding because these parameters determine whether channels remain synchronized during full-scale operation.
USB and Network Audio Gateways
The WM8770ASIFT/V fits a USB or network audio gateway that must translate digital streams into multichannel analogue outputs. Its 24-bit serial interface provides a clear path from the digital audio controller to the codec, while eight channels support monitor, headphone, line, and auxiliary outputs in a compact design. The 192 kHz capability also permits high-rate converter use when the host, transport, clocking, and software path support it. Power and signal-integrity planning should separate the codec’s digital interface from analogue output routing to limit switching and clock-related interference.
Automotive Infotainment Audio
The WM8770ASIFT/V can be evaluated for automotive infotainment platforms that need several analogue audio outputs in a centralized audio subsystem. Eight channels may serve media playback, navigation prompts, hands-free audio, and amplified speaker outputs, while analogue volume control supports system-level attenuation. The 24-bit and 192 kHz specifications provide a suitable performance envelope for high-resolution source material. Automotive deployment additionally requires confirmation of temperature grade, qualification status, electromagnetic behavior, load stability, and protection requirements for every connected output.
Test and Measurement Audio Analyzers
The WM8770ASIFT/V is appropriate for laboratory audio analyzers and signal-conditioning equipment that need several synchronous channels for generating, capturing, or routing test waveforms. The eight-channel configuration reduces conversion overhead, while 24-bit operation up to 192 kHz supports precision measurements across high-rate audio bandwidths. Analogue volume control can aid range setup before conversion or output. Instrument designers should account for the codec’s full-scale analogue limits, clock jitter sensitivity, channel-to-channel behavior, and reference-ground strategy when setting calibration and uncertainty budgets.
엔지니어링 참조 데이터: WM8770ASIFT/V — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | WM8770SIFT/V |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 64-pin TQFP | 64-pin TQFP |
| Product Type | 8-channel audio codec | 8-channel audio codec |
| Audio Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Audio Channels | 8 channels | 8 channels |
| Digital Interface | 24-bit serial | 24-bit serial |
| Volume Control | Analogue volume control | Analogue volume control |
주요 차별점
- Eight-channel conversion in one codec package (vs WM8770SIFT/V)
- Native analogue volume control (vs WM8770SIFT/V)
- High-rate multichannel interface (vs WM8770SIFT/V)
설계 노트
Assign every 64-pin TQFP terminal from the manufacturer pin-description table before routing the PCB. In particular, distinguish analogue inputs and outputs from digital-audio, control, clock, supply, and ground pins. Do not infer a pin function from the WM8770SIFT/V listing alone because suffix-specific devices can differ in qualification and ordering conditions.
Maintain a low-impedance ground reference beneath and around the codec, use short supply connections, and place the required bypass capacitors close to their associated pins. Keep the serial clock and data routes away from high-impedance analogue inputs. The digital interface can carry high-frequency activity even when the audible output is analogue, so controlled return paths are essential for channel-to-channel noise performance.
Establish the master clock, serial frame, channel width, and data alignment before connecting the WM8770 to the surrounding digital-audio controller. The 192 kHz maximum sampling rate does not by itself guarantee correct operation; clock source, jitter, grounding, and interface timing must all satisfy the manufacturer requirements. Validate all eight channels with a known test signal and confirm channel mapping during bring-up.
Do not treat the shared 64-pin TQFP package as proof that two WM8770 suffixes are interchangeable. Before replacing WM8770ASIFT/V with WM8770SIFT/V, compare suffix-specific temperature grade, qualification, clocking, supply, analogue limits, and lifecycle conditions. A footprint match protects the PCB but does not replace electrical and system-level compatibility checks.
규정 준수 정보
The WM8770ASIFT/V suffix-specific environmental and compliance declarations were not stated in the manufacturer or distributor listings reviewed for this update. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status against the current manufacturer documentation before qualification.