WM9707SCFT/V - Stereo AC'97 Audio Codec | Cirrus Logic
부품 번호: WM9707SCFT/V ✗ 단종WM9707SCFT/V 개요
An audio codec is an interface IC that converts analog sound into digital samples and digital audio streams into analog signals. The WM9707SCFT/V belongs to the AC'97 audio codec category within interface ICs and broader semiconductor signal-processing devices. Its digital interface supports communication between an audio codec and a host controller, while its analog inputs and outputs handle microphones, line-level sources, headphones, or powered speakers through external circuitry.
The WM9707SCFT/V provides stereo conversion through one ADC and one DAC, with an 18-bit serial format identified in the product listing. It also includes S/PDIF output, allowing digital audio to leave the codec over a standardized digital interface. The 48-pin TQFP package provides the mixed-signal, digital-interface, clock, and power connections required for a complete stereo codec implementation.
AC'97 revision 2.1 support makes this device relevant to legacy PC audio architectures, industrial control panels, embedded systems, and communications equipment that already use the AC'97 bus. Designers should treat clocking, analog grounding, input and output coupling, and digital signal return paths as central design considerations. Because the AC'97 interface is a mature architecture, it is most appropriate for new designs when its electrical and software compatibility have been confirmed against the complete system requirements.
Typical uses include stereo line-input processing, microphone conditioning through external analog circuits, multimedia playback, industrial operator consoles, and embedded equipment that accepts an AC'97-compatible codec. The S/PDIF output can feed a downstream digital audio receiver, while the analog DAC output supports conventional amplified playback when paired with suitable output circuitry.
A successful implementation requires stable analog and digital supplies, correct master-clock and bit-clock relationships, input and output filtering, and careful separation of analog and return currents. The component also requires PCB space for decoupling and signal routing around a 48-pin mixed-signal package. Confirm the complete pin-description table and application circuit in the manufacturer datasheet before assigning nets or making a board revision.
This product page consolidates the identified codec architecture, package details, sourcing information, comparison points, and practical integration guidance. It emphasizes the verified AC'97, ADC, DAC, resolution, S/PDIF, and package characteristics that determine whether the WM9707SCFT/V fits an existing audio system.
드롭인 대체품: WM9707SCFT/V — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청WM9707SCFT/V 최대 정격 & 전기적 특성
| Product Type | Stereo AC'97 audio codec |
| Audio Interface Standard | AC'97 revision 2.1 |
| ADC Count | 1 ADC |
| DAC Count | 1 DAC |
| Serial Audio Resolution | 18 bit |
| Channel Configuration | Stereo |
| Digital Audio Output | S/PDIF output |
| Package Type | 48-pin TQFP |
| Package Dimensions | 7 mm x 7 mm |
| 실장 유형 | Surface mount |
WM9707SCFT/V 7 mm x 7 mm 핀 구성 가이드
WM9707SCFT/V(7 mm x 7 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: WM9707SCFT/V.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
WM9707SCFT/V 적합 용도: 6 애플리케이션s: Legacy PC Audio Interface, Industrial Operator Console, Embedded Multimedia Playback, Digital Audio Routing, Communications Voice Console, Line-Level Audio Processing.
Legacy PC Audio Interface
The WM9707SCFT/V fits an established AC'97 host architecture because it implements AC'97 revision 2.1 with stereo 18-bit serial audio, one ADC, and one DAC. It can accept analog line or microphone signals through the codec's analog front end and return playback audio through the DAC, while the AC'97 interface carries digital samples to and from the host. The S/PDIF output also provides a digital playback route when required. Before layout release, verify clock generation, reset behavior, analog supply levels, and the complete 48-pin connection against the host controller reference design.
추천
Industrial Operator Console
The WM9707SCFT/V is appropriate for an industrial operator console that already communicates through an AC'97-compatible audio controller. Its one ADC supports analog audio capture, its one DAC supports stereo playback, and the 18-bit serial format provides the digital sample interface. That combination allows voice prompts, system tones, and line-level monitoring to share one mixed-signal codec. Industrial designs should emphasize stable supplies, isolated return paths, input protection, and connector grounding. Confirm the codec's industrial temperature grade and electrical limits before using it in an extended-temperature enclosure.
추천
Embedded Multimedia Playback
The WM9707SCFT/V can support embedded multimedia playback where the system architecture retains an AC'97 revision 2.1 interface. Its stereo DAC converts digital host samples into analog playback signals, while the 18-bit interface format defines the sample path between codec and controller. External headphone or line-output amplification can be connected after the appropriate output filtering. The S/PDIF output is useful when the design also needs a digital route to another receiver. Engineering review should confirm whether the mature AC'97 interface is preferable to a current embedded audio bus for the intended platform.
추천
Digital Audio Routing
The S/PDIF output makes the WM9707SCFT/V relevant to equipment that receives digital audio from an AC'97 host and forwards it over a standardized digital interface. The codec accepts samples through AC'97, processes the playback path through its stereo DAC capability, and can provide an S/PDIF output for downstream equipment. This can simplify interoperability between a legacy host and a digital audio endpoint. The implementation must preserve the required audio clock relationship and configure routing through the codec's control registers. Verify output level, format, and signal-integrity requirements against the complete manufacturer application diagram.
추천
Communications Voice Console
The WM9707SCFT/V is suitable for a communications console that combines captured voice audio with stereo monitoring through an AC'97 controller. The single ADC handles the required analog capture path, the single DAC supports analog monitoring or playback, and the 18-bit serial interface connects both functions to the digital host. An external microphone preamplifier and output amplifier remain necessary because the codec does not replace those stages. Design the analog input with connector protection and controlled impedance, while keeping switching-clock return currents out of the capture path. Confirm latency, clocking, and system-level audio routing in the manufacturer documentation.
추천
Line-Level Audio Processing
The WM9707SCFT/V fits line-level processing systems that need simultaneous analog capture and stereo playback under an AC'97 revision 2.1 architecture. The ADC converts incoming analog information into digital samples, the DAC reconstructs stereo playback, and the 18-bit serial format links the codec to the host controller. Practical implementations should include input coupling, gain control, output reconstruction filtering, and connector protection around the codec. Because analog quality also depends on board grounding and external circuitry, use the manufacturer's reference component values and layout rather than selecting arbitrary passive networks. Check the supported input range before scaling the source signal.
추천
추천 제품 요약
엔지니어링 참조 데이터: WM9707SCFT/V — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | Cirrus Logic |
| Package | 48-pin TQFP, 7 mm x 7 mm |
| Product Type | Stereo audio codec |
| Digital Audio Interface | AC'97 revision 2.1 |
| ADC Channels | 1 ADC |
| DAC Channels | 1 DAC |
| Serial Audio Resolution | 18 bit |
| Digital Audio Output | S/PDIF output |
주요 차별점
- AC'97 revision 2.1 integration (vs WM8985CGEFL)
- Integrated digital audio output (vs WM8944BECS/R)
- Defined mixed-signal package (vs WM8963ECSN/R)
설계 노트
Separate analog and digital return paths on the PCB, and place the required supply-decoupling capacitors directly beside their associated WM9707SCFT/V pins. Keep the TQFP footprint compact enough to minimize return-area discontinuity, while routing the AC'97 clock and data groups away from the ADC inputs and DAC output nodes. Use the manufacturer's reference layout to select copper geometry and component placement rather than relying on generic high-speed rules.
Treat the AC'97 clock, bit-clock, and sync signals as a coordinated group. Verify their source impedance, trace lengths, grounding, and voltage levels at the codec pins, and confirm that the host controller supplies the required master-clock relationship. Incorrect clock ratios or return-current discontinuity can corrupt samples even when analog voltages are correct. The manufacturer timing and application diagrams are the controlling references for these connections.
Do not connect external analog sources before checking the ADC input range, input impedance, and recommended coupling network. Likewise, use the specified output filtering and impedance before driving headphones or a line amplifier. Connector transients should be handled with suitable protection rather than relying on the codec for rugged external-interface protection. Validate the complete signal chain with the manufacturer reference values and schematic.
규정 준수 정보
Formal compliance statements for the exact WM9707SCFT/V were not identified. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the manufacturer's compliance records before production release.