XA7A35T-1CSG325Q - 33,280-Cell Automotive FPGA | AMD
부품 번호: XA7A35T-1CSG325Q ✓ 활성XA7A35T-1CSG325Q 개요
A field-programmable gate array is a semiconductor whose digital functions are defined after manufacture through a configuration bitstream. An FPGA belongs to the broader programmable-logic hierarchy, where configurable logic blocks connect through programmable interconnects. Compared with a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel control logic, protocols, signal processing, and hardware accelerators while retaining field-update flexibility.
The XA7A35T provides 33,280 logic cells and 150 user I/O in a 324-CSBGA package. Its 28 nm process technology supports a compact implementation of control, communication, and data-processing functions. The automotive-oriented XA designation and AEC-Q100 identification distinguish this device from the related commercial Artix-7 XC7A35T. Its pin count supports broad parallel connectivity while keeping the device suitable for space-constrained embedded systems.
The -1 speed designation identifies the performance grade within the Artix-7 family. Programming is performed with the AMD/Xilinx FPGA development toolchain and a compatible device configuration interface. Design engineers can implement parallel state machines, bus bridges, sensor fusion logic, communication controllers, and fixed-point signal-processing pipelines. Because the device is reconfigurable, firmware and laboratory configurations can be updated without changing the printed-circuit-board layout.
Typical uses include automotive body and chassis electronics, industrial control modules, motor-drive supervisory logic, factory automation, communications gateways, and compact test equipment. The 150 available I/O support interfaces such as SPI, UART, CAN, Ethernet PHY management, parallel sensors, and discrete control signals, while internal programmable logic can perform protocol conversion or real-time filtering.
The principal design consideration is BGA assembly. The 324-pin CSBGA requires a multilayer PCB with controlled escape routing, appropriate thermal design, and inspection-based assembly quality. Power, configuration, decoupling, and I/O standards must be designed around the device's operating requirements. Use the pin-description and recommended decoupling tables in the AMD/Xilinx data sheet when assigning balls and planning the power grid.
This product page combines device specifications, package information, automotive qualification details, practical application guidance, and a like-for-like comparison with the related XC7A35T. It also identifies the documentation, footprint, qualification, and programming details engineers should confirm before schematic release and PCB layout signoff.
드롭인 대체품: XA7A35T-1CSG325Q — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XA7A35T-1CSG325Q (동일 폼 팩터 및 풋프린트) — 차이점: Automotive Qualification, Logic Cells, Mounting Type, Package, Process Technology.
XC7A35T-1CSG325I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XA7A35T-1CSG325Q 최대 정격 & 전기적 특성
| Device Type | Artix-7 FPGA |
| Logic Cells | 33,280 cells |
| User I/O | 150 I/O |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| 패키지 | 324-CSBGA, 324-LFBGA CSPBGA |
| Package Pin Count | 324 pins |
| Programmable Logic | 33,280 configurable cells |
| Automotive Classification | Automotive grade |
| Automotive Qualification | AEC-Q100 identified |
| Speed Grade | -1 |
| 실장 유형 | Surface-mount BGA |
| Shipping Package | Tray |
| Device Family | Artix-7 XA |
| FPGA Configuration | Bitstream-programmable |
XA7A35T-1CSG325Q tray 핀 구성 가이드
XA7A35T-1CSG325Q(tray 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XA7A35T-1CSG325Q.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XA7A35T-1CSG325Q 적합 용도: 6 애플리케이션s: Automotive Body Control Module, Industrial Automation Controller, Vehicle Network Gateway, Motor Drive Supervisory Logic, Compact Test and Measurement Instrument, Embedded Communications Gateway.
Automotive Body Control Module
The XA7A35T-1CSG325Q fits compact body-control modules that combine switch inputs, actuator outputs, diagnostic interfaces, and communication gateways. Its 33,280 programmable logic cells can implement debounce logic, timers, state machines, CAN or LIN protocol handling, and signal conditioning in parallel, while 150 user I/O provide substantial board-level connectivity. The automotive XA identity and AEC-Q100 designation distinguish it from the standard XC7A35T. Engineers should still verify the exact temperature grade, power behavior, functional-safety architecture, and all ball assignments against the manufacturer data sheet before release.
추천
Industrial Automation Controller
The XA7A35T-1CSG325Q is suitable for factory equipment that requires deterministic parallel control alongside flexible communications. Its 33,280 logic cells can execute motor-step sequencing, interlock logic, encoder processing, and protocol conversion without relying on multiple fixed-function controllers. With 150 user I/O, the device can connect discrete sensors, relay drivers, encoders, and communication transceivers. The -1 performance grade supports timing-sensitive logic, but final clock limits and I/O timing must be checked for the selected speed grade and operating conditions.
추천
Vehicle Network Gateway
The XA7A35T-1CSG325Q can bridge multiple vehicle network domains by running protocol conversion, filtering, routing, and diagnostic logic in parallel. The 33,280-cell fabric provides enough configurable resources to combine multiple bus controllers and data paths, while 150 I/O accommodate transceiver interfaces and supervision signals. Its 28 nm Artix-7 architecture integrates programmable logic and dedicated resources on one device. Designers should allocate pins by the CSG325 package table and validate protocol timing against the selected I/O standards and automotive environmental requirements.
추천
Motor Drive Supervisory Logic
The XA7A35T-1CSG325Q is well suited to supervisory and protection logic around a motor-drive or power-conversion subsystem. Parallel logic can monitor position inputs, current or voltage thresholds, fault flags, and timing sequences, then generate deterministic gating commands. The 150 I/O provide connectivity for sensor inputs, PWM capture, fault reporting, and communication, while 33,280 logic cells allow redundant monitoring paths to be implemented in hardware. Isolation, protection, and analog-signal conditioning remain external design functions, and switch-mode power stages require careful grounding and layout separation.
추천
Compact Test and Measurement Instrument
The XA7A35T-1CSG325Q can implement the digital core of a compact test instrument because programmable logic supports parallel acquisition control, pattern generation, timing sequencing, and real-time data processing. The 33,280 logic cells can be divided among acquisition pipelines, trigger logic, communication interfaces, and control firmware interfaces, while 150 I/O support wide parallel buses and trigger signals. Its compact CSBGA package reduces board area but requires multilayer construction and disciplined BGA fanout. Timing closure and acquisition-channel specifications should be verified against the Artix-7 performance data.
추천
Embedded Communications Gateway
The XA7A35T-1CSG325Q supports embedded gateways that translate between serial interfaces, local buses, and host processors. Its programmable fabric can perform frame filtering, protocol conversion, packet routing, checksum generation, and FIFO control in hardware, reducing the burden placed on an embedded processor. The 150 I/O allow multiple PHY-facing channels to be connected, and the 33,280 logic cells provide parallel capacity for concurrent data paths. The design must budget I/O standards, clock domains, configuration storage, and thermal margins while confirming all supported interfaces and timing limits in the manufacturer documentation.
추천
추천 제품 요약
엔지니어링 참조 데이터: XA7A35T-1CSG325Q — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7A35T-1CSG325I |
|---|---|---|
| Package | 324-LFBGA CSBGA | 324-LFBGA CSBGA - same package |
| Brand | AMD | AMD |
| Device Type | Artix-7 XA FPGA | Artix-7 FPGA |
| Logic Cells | 33,280 cells | 33,280 cells |
| User I/O | 150 I/O | 150 I/O |
| Automotive Qualification | AEC-Q100 identified | Standard industrial Artix-7 qualification |
| Speed Designation | -1 | -1 |
주요 차별점
- Automotive-oriented qualification (vs XC7A35T-1CSG325I)
- Direct package reuse (vs XC7A35T-1CSG325I)
- Matching programmable resources (vs XC7A35T-1CSG325I)
설계 노트
Plan a multilayer PCB for the 324-CSBGA footprint and use the AMD/Xilinx package drawing for land pattern, solder-mask, and paste recommendations. Dense escape routing should fan into a stable power grid rather than long point-to-point supply paths. Include inspection access and adequate thermal-via distribution under the device. Because the package has 324 balls, do not derive pad geometry from the 325-ball naming used by some catalog records.
Decouple each supply domain close to its assigned FPGA balls and follow the manufacturer power-supply connection table. Separate sensitive analog or auxiliary supplies from switching-regulator and high-current digital paths where the board architecture allows it. The XA7A35T-1CSG325Q uses a 1 V core supply, but auxiliary I/O and internal supply requirements must also be implemented; verify sequence, voltage tolerance, current capacity, and test-point access before schematic signoff.
Treat the 324-CSBGA as a concentrated heat source and provide a multilayer thermal path through vias into internal copper planes. Estimate junction temperature using the package thermal model, actual board construction, airflow, and power consumed by the selected design rather than a generic PCB thermal value. Automotive and industrial enclosure temperatures can sharply reduce allowable power margin, so perform thermal analysis at the highest expected ambient temperature and worst-case logic activity.
Route clocks and high-speed interfaces on controlled-impedance layers with continuous reference planes, short return paths, and avoidance of split-plane crossings. Separate clock, serial I/O, and unrelated parallel buses where coupling could affect timing. Use the Artix-7 I/O and timing documentation to confirm drive strength, slew rate, on-chip termination, and supported I/O standards for each assigned ball; electrical compatibility alone does not guarantee signal-integrity margin.
Avoid substituting an Artix-7 device merely because its logic-cell count is similar. Confirm the exact package, ball assignment, speed grade, voltage configuration, temperature grade, qualification, memory resources, DSP resources, and supported I/O standards. In particular, XC7A35T-1CSG325I matches the listed package, cell count, and I/O count, but it is not an automotive-qualified equivalent. Complete timing, resource, and compliance review before approving any substitution.
규정 준수 정보
The XA7A35T-1CSG325Q is identified as an automotive-grade Artix-7 FPGA with AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the current manufacturer product documentation.