XC2C512-7FTG256C - 512-Macrocell 1.8V CPLD | AMD
부품 번호: XC2C512-7FTG256C ✗ 단종XC2C512-7FTG256C 개요
A CPLD is a programmable logic device whose interconnected macrocells implement digital logic functions. CoolRunner-II devices use CMOS technology and embedded nonvolatile configuration memory, allowing a circuit to retain its programmed configuration without a separate program-memory device. Within the semiconductor hierarchy, the XC2C512 belongs to the programmable-logic family, bridging simple fixed-function logic and higher-capacity FPGA and CPLD architectures.
The -7 speed designation identifies a 7 ns-class performance option, while the C suffix denotes the commercial temperature grade listed as 0°C to 70°C. Four independently powered output banks support interfacing with 1.5 V, 1.8 V, 2.5 V, and 3.3 V devices. DataGATE functionality can suppress output transitions and reduce switching activity, making the device useful in designs where controlled power behavior and signal integrity are important.
The device contains 512 macrocells and is described as a 12K-gate CoolRunner-II CPLD. Its 0.18 µm CMOS implementation combines nonvolatile configuration with fast in-system programming. Although one distributor comparison lists a 128 MHz maximum operating frequency and another product summary lists 179 MHz, the speed grade itself is consistently identified as the 7 ns class. System timing should therefore be evaluated with the AMD DS096 datasheet and the selected design tool rather than inferred from a single catalog frequency value.
Typical uses include industrial control interfaces, bus translation, protocol conversion, board-level glue logic, and compact embedded control systems. The four output banks simplify connections between low-voltage core logic and higher-voltage peripherals, while the large user-I/O count supports parallel buses, control registers, and multiple communication interfaces on a single device.
PCB design should preserve the exact FTG256 footprint, route programming signals according to the AMD guidance, and provide the required core and bank supply rails. Designers should also validate signal integrity on high-speed outputs and include decoupling close to the package power pins. Because the package is a fine-pitch BGA, assembly capability, via geometry, solder-mask design, and thermal conditions require review before production release.
This page consolidates the device identity, verified electrical and packaging facts, selection guidance, and engineering considerations needed to evaluate the XC2C512-7FTG256C against same-package CoolRunner-II options and broader programmable-logic families.
드롭인 대체품: XC2C512-7FTG256C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
XC2C512-7FTG256I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC2C512-10FTG256C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC2C512-10FTG256I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC2C512-6FTG256C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC2C512-6FTG256I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC2C512-7FTG256C 최대 정격 & 전기적 특성
| Device Type | CoolRunner-II CPLD |
| Macrocells | 512 macrocells |
| System Gates | 12K gates |
| User I/O | 270 I/O |
| Core Supply Voltage | 1.8 V |
| Speed Grade | 7 ns class |
| Maximum Pin-to-Pin Delay | 7.1 ns |
| Catalog Propagation Delay | 10 ns |
| Maximum Frequency | 128 MHz to 179 MHz depending on source |
| Technology | 0.18 µm CMOS |
| Logic Family | CMOS |
| Output Banks | 4 output banks |
| Supported Output Interfaces | 1.5 V, 1.8 V, 2.5 V, and 3.3 V |
| Configuration Memory | Nonvolatile |
| Programming Support | In-system programmable |
| 패키지 | 256-pin FTBGA |
| Package Dimensions | 23 mm x 23 mm |
| Package Pitch | 1 mm |
| 실장 유형 | Surface mount |
| 동작 온도 | 0°C to 70°C |
XC2C512-7FTG256C 1 mm 핀 구성 가이드
XC2C512-7FTG256C(1 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC2C512-7FTG256C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC2C512-7FTG256C 적합 용도: 6 애플리케이션s: Industrial Control and Automation, Bus Translation and Protocol Conversion, Embedded System Glue Logic, Data Acquisition Front-End Control, Programmable Display and Interface Control, Secure Communication Interface Conditioning.
Industrial Control and Automation
The XC2C512-7FTG256C is suitable for consolidating control logic, interlocks, status registers, and interface decoding in industrial equipment. Its 512 macrocells provide substantially more logic capacity than small PAL or GAL devices, while nonvolatile configuration preserves the control function without an external program-memory IC. The 7 ns-class device helps preserve timing margin in control paths, and four output banks permit connection to 3.3 V sensors, 2.5 V interface logic, and 1.8 V core circuitry. For factory systems, the commercial 0°C to 70°C range should be checked against the enclosure’s actual ambient temperature and internal temperature rise.
추천
Bus Translation and Protocol Conversion
The four output banks of the XC2C512-7FTG256C allow parallel interfaces operating at 1.5 V, 1.8 V, 2.5 V, and 3.3 V to share one CPLD. This is useful when bridging legacy peripheral buses with a lower-voltage processor bus without adding several separate level translators. Logic can be assigned to capture, translate, latch, or retime interface signals, while the 512-macrocell capacity allows multiple protocols to coexist on one device. Engineers should establish direction, setup, hold, and I/O timing against both external devices rather than assuming that bank selection removes all electrical constraints.
추천
Embedded System Glue Logic
XC2C512-7FTG256C can implement address decoding, interrupt control, watchdog logic, FIFO adapters, and peripheral interconnect logic around an embedded processor. Its in-system programming and nonvolatile configuration support rapid firmware and hardware iterations, while the 270 listed user I/O provide ample connections for parallel registers and discrete control signals. The 7 ns-class timing is useful when the CPLD sits directly in a synchronous data path, although the complete path must be evaluated with external processor setup time and board delay. Its 1.8 V core also fits naturally into compact low-voltage embedded systems.
추천
Data Acquisition Front-End Control
The XC2C512-7FTG256C can coordinate multiplexers, ADC control signals, sample counters, trigger logic, and data capture around a mixed-signal measurement system. Its programmable macrocell array supports parallel timing and state-machine functions that would otherwise occupy several discrete logic devices. Four output banks help separate ADC interface voltages from lower-voltage control logic, while DataGATE behavior can limit unnecessary output transitions on multiplexed channels. The design should still include settling-time analysis, input-noise review, and isolation checks because the CPLD controls the acquisition path but does not replace analog front-end design.
추천
Programmable Display and Interface Control
The XC2C512-7FTG256C is useful for display timing, keypad scanning, indicator control, and adapter logic in compact instrument panels. Parallel display data, command signals, and touch or keypad inputs can be managed through independently banked I/O sections, allowing different external voltage domains to coexist. Its 512 macrocells provide enough room for timing generation and control tables without requiring a larger programmable-logic device. Engineers should evaluate output transition rates and board-level signal integrity, particularly when long flex-cable connections or edge rates above the slower device classes are involved.
추천
Secure Communication Interface Conditioning
The XC2C512-7FTG256C can add protocol framing, command filtering, timeout counters, status isolation, and physical-interface conditioning around communication controllers. Assigning these functions to a separate CPLD can offload a microcontroller and isolate software timing from physical-layer behavior. The four I/O banks support mixed voltage domains encountered between a transceiver, controller, and supporting logic, while nonvolatile configuration ensures the interface remains operational after reset. For security-sensitive equipment, engineers should also document fail-safe output states, configuration access controls, and the consequences of an unprogrammed or corrupted configuration image.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC2C512-7FTG256C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC2C512-7FTG256I | XC2C512-10FTG256C | XC2C512-10FTG256I | XC2C512-6FTG256C | XC2C512-6FTG256I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 256-pin FTBGA | 256-pin FTBGA | 256-pin FTBGA | 256-pin FTBGA | 256-pin FTBGA | 256-pin FTBGA |
| Macrocells | 512 macrocells | 512 macrocells | 512 macrocells | 512 macrocells | 512 macrocells | 512 macrocells |
| System Gates | 12K gates | 12K gates | 12K gates | 12K gates | 12K gates | 12K gates |
| Core Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Speed Grade | 7 ns class | 7 ns class | 10 ns class | 10 ns class | 6 ns class | 6 ns class |
| Temperature Grade | Commercial: 0°C to 70°C | Industrial grade | Commercial: 0°C to 70°C | Industrial grade | Commercial: 0°C to 70°C | Industrial grade |
| User I/O | 270 I/O | 270 I/O | 270 I/O | 270 I/O | 270 I/O | 270 I/O |
| Output Banks | 4 output banks | 4 output banks | 4 output banks | 4 output banks | 4 output banks | 4 output banks |
| Configuration Memory | Nonvolatile | Nonvolatile | Nonvolatile | Nonvolatile | Nonvolatile | Nonvolatile |
주요 차별점
- Closest temperature-grade substitution retains the complete device configuration (vs XC2C512-7FTG256I)
- Faster same-package option can improve timing margin (vs XC2C512-6FTG256C)
- Slower variant supports cost-sensitive designs with adequate timing margin (vs XC2C512-10FTG256C)
설계 노트
Treat the XC2C512-7FTG256C as a 1 mm-pitch 256-ball FTBGA device and follow the exact land pattern, mask definition, and assembly process in AMD document DS096. Place the device so its supply, ground, configuration, and JTAG connections have short paths to their supporting circuitry. Fine-pitch BGAs are sensitive to pad-to-pad bridging, thermal stress, and solder-profile variation, so the PCB stack-up and assembly window should be reviewed before fabrication release.
Route the 1.8 V core rail and the selected output-bank supplies independently, with local high-frequency and bulk decoupling placed close to their associated package balls. Account for simultaneous switching and the device’s 1.8 V core requirement when planning power sequencing. The four-bank architecture supports 1.5 V, 1.8 V, 2.5 V, and 3.3 V interfaces, but each enabled bank must receive a valid supply within its specified operating range.
Review every high-fanout or externally exposed output for edge-rate, ringing, crosstalk, and connector-loading effects. DataGATE can reduce output switching, but it changes the usable timing behavior and must be included in system timing analysis. Use the DS096 timing parameters and the selected speed grade rather than relying only on the 7 ns device designation, especially when external devices introduce additional setup, hold, and propagation delay.
Do not substitute a 10 ns or 6 ns speed grade without rerunning timing analysis, and do not use the commercial-temperature XC2C512-7FTG256C outside 0°C to 70°C. A cross-brand MAX or ispLSI migration may require a different footprint, architecture, and programming file even when functional requirements appear similar. Validate JTAG-chain order, configuration behavior, I/O standards, and bank supplies in the final hardware before production programming.
규정 준수 정보
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this legacy CoolRunner-II device.