XC3S200A-5FGG320C - 200K Spartan-3A FPGA | AMD
부품 번호: XC3S200A-5FGG320C ✗ 단종XC3S200A-5FGG320C 개요
An FPGA is a programmable-logic semiconductor whose interconnect and processing elements are configured after manufacture. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and offers an alternative to application-specific integrated circuits when interfaces, control logic, or product requirements are likely to evolve. The Spartan-3A family combines configurable logic, block RAM, dedicated multipliers, and general-purpose I/O in a single device.
The Spartan-3A architecture provides 4,032 logic cells, 200,000 system gates, 248 I/O, and up to 4032 blocks of logic-cell resources identified in the ordering information. The -5 suffix denotes the device speed grade, while FGG320C identifies the lead-free 320-ball grid-array package and commercial temperature configuration. The 90 nm process supports a compact implementation while retaining ample I/O for external memory, control signals, and communications interfaces.
Its 320-pin FBGA package exposes substantially more interface options than smaller Spartan devices, making the XC3S200A suitable for systems that need several parallel buses or multiple external interfaces. Designers should account for the package's fine pitch, thermal paths, and routing complexity when defining a PCB footprint and assembly process. Configuration storage, startup behavior, clocking, decoupling, and I/O standards remain central implementation considerations.
Typical uses include industrial automation controllers, embedded protocol bridges, data-acquisition systems, machine-control interfaces, low-cost network equipment, and consumer electronic logic. The 248 I/O count is particularly useful for parallel sensor acquisition, display and memory interfaces, and mixed peripheral connectivity, while the programmable architecture allows functional updates without changing the PCB.
For robust implementation, follow the AMD DS529 family datasheet for pin assignments, supported I/O standards, configuration requirements, and package details. Place all required decoupling capacitors close to the appropriate supply pins, validate high-speed interface signal integrity, and confirm configuration storage or programming interfaces before committing a board layout.
This product page consolidates the verified device identity, package characteristics, drop-in speed- and temperature-grade alternatives, sourcing guidance, and practical design considerations needed to evaluate the XC3S200A-5FGG320C for an embedded programmable-logic design.
드롭인 대체품: XC3S200A-5FGG320C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC3S200A-5FGG320C (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Package, Logic Cells, Speed Grade, Temperature Grade.
XC3S200A-4FGG320C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S200A-4FGG320I
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC3S200A-5FGG320I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC3S200A-4FGG320E
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC3S200A-5FGG320E
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC3S200A-5FGG320C 최대 정격 & 전기적 특성
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-3A |
| System Gates | 200,000 gates |
| Logic Cells | 4,032 cells |
| Maximum Performance Figure | 770 MHz |
| User I/O | 248 I/O |
| Internal RAM | 294,912 bits |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V nominal |
| 패키지 | 320-pin FBGA, 19 mm x 19 mm |
| Package Ball Count | 320 balls |
| Speed Grade | -5 |
| Temperature Grade | Commercial |
| 실장 유형 | Surface Mount |
| Programming Technology | SRAM-based programmable logic |
| Lead-Free Status | Lead Free |
| RoHS 상태 | RoHS Compliant |
XC3S200A-5FGG320C 320 balls 핀 구성 가이드
XC3S200A-5FGG320C(320 balls 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC3S200A-5FGG320C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC3S200A-5FGG320C 적합 용도: 6 애플리케이션s: Industrial Automation Controller, Data-Acquisition System, Communications Protocol Bridge, Machine Vision and Imaging Control, Consumer Electronic Interface Controller, Embedded Test and Measurement.
Industrial Automation Controller
The XC3S200A-5FGG320C fits industrial automation controllers that combine parallel machine interfaces with programmable timing and logic. Its 4,032 logic cells and 248 user I/O provide capacity for digital I/O expansion, encoder or limit-switch inputs, and actuator-control outputs without requiring multiple fixed-function devices. The 770 MHz performance figure supports demanding control paths, while the -5 speed grade offers additional timing margin over the -4 option. In implementation, the FPGA can bridge sensors, coordinate motion sequences, and manage communications. The primary design consideration is validating every supported I/O standard, voltage, and timing constraint against the DS529 package data for the selected 320-ball FBGA footprint.
추천
Data-Acquisition System
The XC3S200A-5FGG320C is suitable for parallel data-acquisition and conditioning systems requiring a high count of deterministic digital interfaces. Its 248 user I/O can connect parallel converters, multiplexers, memory devices, and trigger lines, while the 200,000-system-gate Spartan-3A implementation provides programmable datapaths and acquisition sequencing. The -5 grade is useful when clocking margins are limited. A practical implementation can use internal logic for channel selection, trigger alignment, and data packing before transferring results through an external interface. Validate acquisition-clock jitter, input thresholds, and simultaneous-switching-noise effects during schematic and PCB review.
추천
Communications Protocol Bridge
The XC3S200A-5FGG320C can implement a programmable communications bridge where multiple serial or parallel interfaces must be converted and buffered. Its 4,032 logic cells are appropriate for protocol state machines, FIFO control, clock-domain crossing, and packet handling, while 248 I/O provide substantial board-level connectivity. The -5 speed grade can improve timing margin in parallel buses and source-synchronous interfaces. Designers can instantiate compatible FPGA IP, connect it to external transceivers or memories, and use programmable logic to adapt protocol revisions without a PCB change. Configuration storage, clocking architecture, reset sequencing, and I/O standards must be verified against the manufacturer documentation.
추천
Machine Vision and Imaging Control
The XC3S200A-5FGG320C is appropriate for machine-vision controllers that coordinate camera capture, triggers, image buffers, and actuator outputs. Its 248 I/O allow parallel camera data, strobe, synchronization, and encoder signals to be handled in one programmable device, while the 200,000-gate logic capacity supports control and interface functions. The -5 speed grade offers useful timing margin for pixel-clock and data-capture paths. In a typical implementation, the FPGA generates camera triggers, captures burst data into external memory, and coordinates exposure or inspection outputs. Signal-integrity analysis, memory interface timing, and pin placement should be completed before layout because the fine-pitch FBGA can increase routing complexity.
추천
Consumer Electronic Interface Controller
The Spartan-3A XC3S200A-5FGG320C can serve as an interface controller in cost-sensitive consumer products where programmable logic is preferable to a large ASIC. Its 4,032 cells and 248 I/O support display controls, touch interfaces, button matrices, LEDs, external memory, and peripheral interconnect. The -5 grade provides additional timing margin over a -4 device without changing the 320-pin FBGA footprint. A compact implementation can centralize display timing, debounce controls, and coordinate low-cost sensors while retaining configuration-based product flexibility. Designers should optimize for quiescent power, boot behavior, configuration memory cost, and EMC performance, and should verify that the commercial-temperature device matches the product's environmental requirements.
추천
Embedded Test and Measurement
The XC3S200A-5FGG320C is suitable for embedded test and measurement equipment that requires flexible sequencing, pattern generation, and instrument-bus control. Its 4,032 logic cells can implement counters, timing generators, state machines, and acquisition pipelines, while 248 I/O support instruments, trigger lines, displays, and external memory. The -5 speed grade is beneficial when the highest supported clock rate influences timing resolution. A practical design can coordinate measurements, capture results, and present them through a communications interface. For accurate results, define clock domains and jitter budgets carefully, use the manufacturer package data to assign dedicated clock-capable pins, and validate the configuration and power-up sequence before production.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC3S200A-5FGG320C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC3S200A-4FGG320C | XC3S200A-4FGG320I | XC3S200A-5FGG320I | XC3S200A-4FGG320E | XC3S200A-5FGG320E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA |
| FPGA Family | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A |
| Logic Cells | 4,032 cells | 4,032 cells | 4,032 cells | 4,032 cells | 4,032 cells | 4,032 cells |
| System Gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates |
| User I/O | 248 I/O | 248 I/O | 248 I/O | 248 I/O | 248 I/O | 248 I/O |
| Speed Grade | -5 | -4 | -4 | -5 | -4 | -5 |
| Temperature Grade Suffix | C | C | I | I | E | E |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
| Core Supply Voltage | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
주요 차별점
- Higher speed grade within the same 320-ball FBGA footprint (vs XC3S200A-4FGG320C)
- Exact package and device density for PCB reuse (vs XC3S200A-4FGG320C)
- Temperature-grade alternatives for environmental requalification (vs XC3S200A-4FGG320I)
설계 노트
Use the exact 320-ball FBGA land pattern and ball map defined for the FGG320 package in the AMD DS529 documentation. Place all required supply-decoupling capacitors close to their associated device power balls and provide a low-impedance distribution network. Because a 320-ball package requires dense escape routing, confirm ball assignments, power-grid connectivity, and manufacturing capabilities before releasing the PCB artwork.
Assign clocks and high-speed interfaces to electrically suitable balls, and validate source-synchronous, differential, and memory interfaces with the voltage and timing data in the family datasheet. Keep sensitive inputs away from noisy switching or return paths, observe referenced clock and data arrangements, and perform post-route timing analysis for both the -5 design and any proposed -4 migration. A pin-compatible alternative does not guarantee unchanged timing closure.
Do not treat differences in the trailing C, I, or E suffix as assembly-equivalent without checking environmental qualification. The -4 and -5 speed grades also require separate timing validation, and a 320-pin FBGA package is not interchangeable with smaller Spartan-3 packages. Before schematic release, verify the exact ordering code, temperature requirements, configuration interface, package dimensions, and PCB footprint against the current AMD documentation.
Implement separate, well-filtered supply paths where required for the core and I/O banks, and follow the manufacturer guidance for sequencing, voltage tolerances, and external configuration power. Check both static current and transient demand in the power budget. Configuration must remain stable during startup; otherwise, unexpected loading or a reset event can place the SRAM-based FPGA into an invalid or incomplete configuration state.
규정 준수 정보
The verified product listing identifies the FGG320C ordering configuration as lead-free and RoHS compliant. REACH, halogen-free, and conflict-minerals status were not established.