XC4VLX60-10FF1148I - 59,904-Cell Virtex-4 LX FPGA | AMD
부품 번호: XC4VLX60-10FF1148I ✓ 활성XC4VLX60-10FF1148I 개요
A field-programmable gate array is a semiconductor whose logic and interconnect resources are configured after manufacture. Within the programmable-logic hierarchy, an FPGA combines configurable logic blocks, block RAM, programmable input/output blocks, clocking, and dedicated hard processors into a single device. The Virtex-4 LX family is positioned for high-performance systems requiring substantial parallel processing, flexible interfaces, and rapid hardware customization without changing a PCB layout.
The XC4VLX60-10FF1148I provides 6,656 logic array blocks, 2.81 Mbit of embedded memory, and 640 user I/O. Its 26,624 adaptive logic modules provide programmable combinational and sequential logic resources, while the 1148-ball FCBGA supports dense board-level interconnect requirements. The industrial-temperature suffix and -10 performance grade target systems where operating-temperature qualification and predictable logic performance are important.
The device belongs to the Virtex-4 LX architecture and uses a 1.2 V core voltage. Its large logic array is suitable for parallel datapaths, protocol engines, embedded processor systems, network interfaces, and test equipment. Dedicated hard resources can reduce implementation effort when a design can use established blocks such as Ethernet controllers, memory controllers, or multiplier/accumulator functions rather than implementing every function in soft logic.
Typical applications include high-speed network equipment, industrial control systems, telecommunications infrastructure, instrumentation, embedded computing, and ASIC prototyping. Its 640 user I/O makes it especially useful for boards carrying substantial parallel data, control signals, memory interfaces, clocks, and high-speed serial links. Designers should still verify every interface voltage, speed, pin standard, and power requirement against the device documentation before beginning implementation.
The primary engineering constraint is power and signal integrity in the 1148-ball FCBGA. A multilayer PCB with a solid ground plane, carefully decoupled supply rails, controlled-impedance routing, and complete test access is strongly recommended. Device configuration also depends on a valid startup sequence and suitable configuration memory, so power rails and configuration control must be designed together rather than treated as independent blocks.
This page combines the exact ordering information, package characteristics, architecture parameters, drop-in family options, comparison data, and implementation guidance needed to evaluate the XC4VLX60-10FF1148I before schematic capture or PCB layout. It also distinguishes exact same-footprint alternatives from options that require a different package or a different FPGA architecture.
드롭인 대체품: XC4VLX60-10FF1148I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
XC4VLX60-10FF1148I4016
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC4VLX60-10FFG1148I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC4VLX60-10FF1148C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC4VLX60-10FF1148IS2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC4VLX60-10FF1148
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC4VLX60-10FF1148I 최대 정격 & 전기적 특성
| Device Type | Virtex-4 LX field-programmable gate array |
| Logic Cells | 59,904 cells |
| Adaptive Logic Modules | 26,624 ALMs |
| Logic Array Blocks | 6,656 LABs |
| Embedded Memory | 2.81 Mbit |
| User I/O | 640 I/O |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm CMOS copper process |
| Speed Grade | -10 |
| 패키지 | 1148-ball FCBGA |
| Package Construction | 1148-BBGA, FCBGA |
| 핀 수 | 1,148 balls |
| 실장 유형 | Surface mount |
| RoHS 상태 | Pb-Free |
XC4VLX60-10FF1148I 1148-bbga, fcbga 핀 구성 가이드
XC4VLX60-10FF1148I(1148-bbga, fcbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC4VLX60-10FF1148I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC4VLX60-10FF1148I 적합 용도: 6 애플리케이션s: High-Speed Network Equipment, Industrial Control and Automation, Telecommunications Infrastructure, Embedded Computing and Processor Systems, ASIC Prototyping and Verification, Test and Measurement Instrumentation.
High-Speed Network Equipment
The XC4VLX60-10FF1148I fits network equipment requiring substantial parallel datapaths and a large pin count. Its 59,904 logic cells and 26,624 adaptive logic modules can support packet-processing pipelines, buffer-management logic, protocol state machines, and traffic-management functions. The 640 user I/O provide access to parallel memories, control signals, clocks, and board-level interfaces. With a 1148-ball FCBGA, the device supports dense routing in advanced multilayer boards. Designers should implement clocking and high-speed interfaces against the exact FF1148 timing data, while using the package file to reserve power, ground, configuration, and test-access balls.
추천
Industrial Control and Automation
The XC4VLX60-10FF1148I is appropriate for industrial automation systems that combine deterministic control, extensive parallel I/O, and programmable data processing. The industrial suffix supports use in applications requiring a qualified temperature range, while the 1.2 V, 90 nm Virtex-4 LX architecture provides substantial logic capacity for machine controllers, motion-control sequencing, sensor aggregation, and safety-adjacent supervisory logic. Its 640 user I/O can connect field-bus transceivers, digital I/O modules, encoders, and local memories. Validate timing margin, isolation strategy, power-loss behavior, and configuration recovery in accordance with the product's environmental requirements.
추천
Telecommunications Infrastructure
The XC4VLX60-10FF1148I can serve in telecommunications infrastructure requiring parallel traffic processing, flexible interfaces, and programmable hardware. Its 59,904 logic cells and 2.81 Mbit of embedded memory are useful for channel-processing logic, packet engines, test patterns, and interface adaptation. The large FCBGA device allows direct connection to parallel memories and multiple board-level data buses, although routing density and simultaneous switching demand careful layer planning. Keep clock and data paths deterministic, provide local decoupling at each supply ball group, and use the AMD package and timing documents to validate speed, I/O standards, and configuration sequencing.
추천
Embedded Computing and Processor Systems
The XC4VLX60-10FF1148I is suitable for embedded computing platforms that combine a hard processor subsystem with programmable peripherals or custom accelerators. Its 26,624 adaptive logic modules can implement communication bridges, memory controllers, algorithm pipelines, and application-specific peripherals while the Virtex-4 hard resources handle embedded processing functions. The 640 user I/O supports shared memory, storage interfaces, control pins, and expansion buses. Because integration depends on the selected processor configuration, engineers should confirm the exact hard-processor count, bus interface, clock requirements, and memory map against AMD documentation before schematic capture.
추천
ASIC Prototyping and Verification
The XC4VLX60-10FF1148I supports ASIC prototyping and hardware verification by providing enough programmable logic to partition a large system across multiple FPGA domains. Its 59,904 logic cells can host interface adapters, protocol converters, memory controllers, test logic, and datapath sections, while 640 user I/O simplifies connection to high-pin-count test boards. The 1148-ball FCBGA requires careful escape routing and complete ball assignment, making component-level prototyping more practical than high-density BGA assembly for initial validation. Use the AMD pinout files to map every power, configuration, clock, and general-purpose I/O ball in the board schematic.
추천
Test and Measurement Instrumentation
The XC4VLX60-10FF1148I is well matched to programmable test and measurement systems that require parallel acquisition, pattern generation, timing control, and flexible data routing. The 59,904 logic cells can implement acquisition pipelines, correlation engines, digital pattern logic, and analysis functions, while the 640 user I/O connects to converters, memory devices, and synchronization circuitry. Its 1.2 V core and dense FCBGA require an orderly power grid and precise clock distribution. Use the exact device timing tables for any high-speed capture path and apply controlled-impedance routing to maintain predictable signal behavior across the large package.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC4VLX60-10FF1148I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC4VLX60-10FF1148I4016 | XC4VLX60-10FFG1148I | XC4VLX60-10FF1148C | XC4VLX60-10FF1148IS2 | XC4VLX60-10FF1148 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 1148-ball FCBGA | 1148-ball FCBGA | 1148-ball FCBGA | 1148-ball FCBGA | 1148-ball FCBGA | 1148-ball FCBGA |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Speed Designation | -10 | -10 | -10 | -10 | -10 | -10 |
| Process Technology | 90 nm CMOS copper process | 90 nm CMOS copper process | 90 nm CMOS copper process | 90 nm CMOS copper process | 90 nm CMOS copper process | 90 nm CMOS copper process |
주요 차별점
- Large programmable-logic capacity in a single device (vs XC4VLX60-10FFG1148I)
- Dense user-I/O availability (vs XC4VLX60-10FF1148)
- Substantial embedded memory for data-intensive logic (vs XC4VLX60-10FF1148I4016)
- Established Virtex-4 LX architecture and resource scale (vs XC4VLX60-10FF1148C)
설계 노트
Treat the 1148-ball FCBGA as a complete power, ground, configuration, clock, and user-I/O routing problem. Assign every ball from the AMD XC4VLX60 FF1148 package file, reserve no-connect and power positions conservatively, and preserve the package construction changes described by AMD. A multilayer board with continuous planes is preferable to fragmented planes because the 640 user I/O can create substantial simultaneous switching activity. Add local decoupling at the device and validate return paths for high-speed buses, configuration signals, and clock networks before fabrication.
Design the 1.2 V core rail and other package-specific supplies as separate distribution domains with controlled ramp behavior. Place the smallest effective decoupling capacitor directly beside each relevant power ball group and provide bulk capacitance near the supply regulator or distribution point. Estimate dissipation for the implemented logic rather than assuming the full device will operate at maximum toggle rates. Verify startup sequencing against the configuration requirements because configuration must not begin before the relevant rails satisfy their voltage and ramp conditions.
Use the exact FF1148 timing tables to define external clock and data-interface constraints, and apply controlled-impedance routing on the multilayer PCB. Keep high-speed nets short, provide continuous reference planes, and account for package-transition effects between the FCBGA balls and the first routing layer. For source-synchronous interfaces, match clock-to-data routing and provide adequate escape opportunities through via arrays. After schematic completion, run board-level signal-integrity and power-integrity checks rather than relying only on nominal FPGA timing analysis.
Do not approve XC4VLX60 FF1148 substitutions solely because the packages match. Suffixes such as I, G, C, S2, and I4016 can encode different qualification, compliance, or ordering attributes. Confirm the exact MPN against the approved-part list, required operating temperature, Pb-Free requirement, lifecycle approval, and configuration file. Also verify that the selected package construction matches the mechanical drawing and assembly process. A footprint-compatible but qualification-incompatible replacement can create compliance or field-reliability problems.
규정 준수 정보
The XC4VLX60-10FFG1148I listing is identified as Pb-Free, but the target MPN's compliance declarations are not stated. AEC-Q100 qualification is not indicated for this industrial Virtex-4 LX FPGA.