XC6SLX150T-2FG484C Spartan-6 LXT FPGA 147443 LE | Xilinx
부품 번호: XC6SLX150T-2FG484C ✗ 단종XC6SLX150T-2FG484C 개요
An FPGA is a programmable logic device in which the digital circuit is defined by a configuration bitstream rather than fixed interconnections. Within the product hierarchy, this device is an FPGA, a programmable-logic IC, and a semiconductor that combines configurable logic, block RAM, programmable I/O, dedicated hard processors, and clock-management resources. The Spartan-6 LXT family extends the Spartan-6 architecture with high-speed serial transceivers for communication and networking designs.
Principal characteristics include 147443 logic cells, 23038 adaptive logic modules, 4.71 Mbit of block RAM, 296 user I/O, and a maximum operating frequency of 667 MHz for the cited -2-family configuration. The device also provides differential and single-ended I/O standards, on-chip block RAM, digital clock managers, and high-speed serial transceiver resources. These features support parallel data processing, network interfaces, industrial control, and embedded communication systems.
The 484-BBGA package provides a high pin count and compact board footprint, but it also requires a fine-pitch layout, careful power-plane design, and assembly processes capable of handling the dense ball array. Configuration loading and the bitstream must match the selected device, speed grade, and package variant. Board bring-up should therefore confirm successful configuration before functional testing begins.
Typical uses include industrial networking equipment, control systems, communications infrastructure, video and image processing, and embedded test equipment. The Spartan-6 LXT transceiver resources are particularly useful when a design links parallel processing logic to high-speed serial interfaces, while its programmable I/O supports external memory, parallel buses, and mixed-signal interfaces.
Plan the power tree for simultaneous transceiver, logic, and I/O activity rather than a single unloaded rail. Place decoupling capacitors at the package power balls, keep high-speed serial traces short and impedance controlled, and follow the manufacturer's pin and ball-grid assignment tables when defining the footprint. This page combines device specifications, qualified same-footprint alternatives, and practical design guidance beyond a basic catalog listing.
드롭인 대체품: XC6SLX150T-2FG484C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC6SLX150T-2FG484C (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Logic Cells, Operating Temperature, Package, Mounting Type.
XC6SLX150T-3FG484C
✅ 드롭인가격 문의
데이터시트 보기 →XC6SLX150T-N3FG484C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC6SLX150T-4FGG484C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC6SLX150-2FG484C
✅ 드롭인가격 문의
데이터시트 보기 →XC6SLX150-2FG484I
✅ 드롭인가격 문의
데이터시트 보기 →XC6SLX150T-2FG484C 최대 정격 & 전기적 특성
| Device Type | Spartan-6 LXT Field Programmable Gate Array (FPGA) |
| Logic Cells | 147443 LE |
| Adaptive Logic Modules | 23038 ALM |
| Embedded Memory | 4.71 Mbit |
| Embedded Memory Bits | 4939776 bit |
| User I/O | 296 |
| 패키지 | 484-BBGA |
| Device Variant | XC6SLX150T |
| Spartan-6 Device Family | Spartan-6 LXT |
| Speed Grade | -2 |
| Maximum Internal Frequency | 667 MHz |
| 실장 유형 | Surface Mount |
| 동작 온도 | 0 C to +85 C |
XC6SLX150T-2FG484C 484-bbga 핀 구성 가이드
XC6SLX150T-2FG484C(484-bbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC6SLX150T-2FG484C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC6SLX150T-2FG484C 적합 용도: 6 애플리케이션s: Industrial Networking Equipment, Machine Vision and Image Processing, Programmable Logic Control, Communications Protocol Conversion, Test and Measurement Systems, Embedded Communications Gateways.
Industrial Networking Equipment
The XC6SLX150T-2FG484C fits industrial Ethernet and network-interface equipment that requires substantial parallel logic alongside serial connectivity. Its 147443 logic cells and 23038 adaptive logic modules can support packet classification, buffering, protocol conversion, and management functions, while 4.71 Mbit of block RAM accommodates queues and lookup tables. The Spartan-6 LXT high-speed serial resources allow parallel processing logic to feed copper or optical interface circuitry. Because the device uses a dense 484-BBGA package, validate the footprint against the official ball assignment and control impedance on all high-speed serial routes.
추천
Machine Vision and Image Processing
The XC6SLX150T-2FG484C is suitable for parallel image-processing pipelines in cameras, inspection equipment, and industrial vision controllers. Its 147443 logic cells support parallel filters, pixel classification, and format conversion, while 4.71 Mbit of block RAM can hold line buffers, lookup tables, and intermediate pixel data. The 296 user I/O provide substantial connectivity to image sensors, frame-capture devices, and external memory. Use dedicated clocking resources for deterministic pipeline timing, and place interface and memory routing in dedicated regions where possible to reduce contention during high-utilization operation.
추천
Programmable Logic Control
The XC6SLX150T-2FG484C can serve as the central programmable controller in a factory automation or motion-control system. Its 147443 logic cells allow multiple control loops, sequencing state machines, and safety-interlock logic to operate concurrently, and its embedded RAM can store schedules, calibration tables, or diagnostic history. With 296 user I/O, the device can interface directly with encoders, discrete sensors, motor-control signals, and communications gateways. The 0 C to +85 C industrial range supports typical factory environments, although the complete assembly still requires its own thermal and safety validation.
추천
Communications Protocol Conversion
The XC6SLX150T-2FG484C is appropriate for bridges and gateways that translate between parallel bus architectures and high-speed serial links. Its large logic capacity can terminate protocols, maintain framing, perform FIFO conversion, and implement backpressure without relying on external programmable logic. The LXT variant's high-speed serial resources make it more useful for such designs than the non-T LX ordering code. Confirm the required transceiver lanes, reference-clock topology, and supported I/O standards against the device data sheet before assigning PCB connections.
추천
Test and Measurement Systems
The XC6SLX150T-2FG484C can implement parallel acquisition, pattern generation, and real-time analysis in programmable test and measurement equipment. Its 147443 logic cells and 4.71 Mbit of block RAM support high-throughput channel multiplexing, timing generators, and data-comparison functions. The 296 user I/O allow direct connection to stimulus and capture circuits, while the cited 667 MHz internal operating frequency supports demanding parallel sections. Designers should use vendor-supported clocking and timing constraints, and reserve configuration and status paths for reliable debugging and recovery.
추천
Embedded Communications Gateways
The XC6SLX150T-2FG484C is well suited to embedded gateways that aggregate local sensor data and forward it over serial links. Programmable logic can handle filtering, protocol conversion, timestamping, and buffering, while the embedded memory supports packet queues and configuration tables. Its 296 user I/O connect discrete industrial sensors, local transceivers, and status indicators without requiring a separate programmable-logic device. The 484-BBGA package saves board area but demands careful power delivery, thermal planning, and assembly capability, particularly when the gateway must operate for extended periods at elevated ambient temperature.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC6SLX150T-2FG484C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC6SLX150T-3FG484C | XC6SLX150T-N3FG484C | XC6SLX150T-4FGG484C | XC6SLX150-2FG484C | XC6SLX150-2FG484I |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 484-BBGA | 484-BBGA - same package | 484-BBGA - same package | 484-BBGA - same package class | 484-BBGA - same package | 484-BBGA - same package |
| Device Family | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LX | Spartan-6 LX |
| Logic Cells | 147443 LE | 147443 LE | 147443 LE | 147443 LE | 147443 LE | 147443 LE |
| Adaptive Logic Modules | 23038 ALM | 23038 ALM | 23038 ALM | 23038 ALM | 23038 ALM | 23038 ALM |
| Embedded Memory | 4.71 Mbit | 4.71 Mbit | 4.71 Mbit | 4.71 Mbit | 4.71 Mbit | 4.71 Mbit |
| Speed and Ordering Grade | -2 | -3 | -3N | -4 | -2 | -2 |
주요 차별점
- Provides the LXT feature set with 296 user I/O and 147443 logic cells in a 484-BBGA package (vs XC6SLX150-2FG484C)
- Maintains the same 150T logic density when moving to a faster speed grade (vs XC6SLX150T-3FG484C)
- Supports an automotive-oriented family alternative without changing the 484-ball package class (vs XC6SLX150T-N3FG484C)
설계 노트
Create the power tree for the 484-BBGA using separate core, I/O, configuration, and auxiliary-supply domains identified in the manufacturer's package and power-consumption tables. Place bulk and high-frequency decoupling capacitors close to their assigned power balls, and keep the return paths for switching current continuous. Verify steady-state and transient current against the selected Spartan-6 configuration, including simultaneous logic and high-speed transceiver activity.
Use the official 484-BBGA land pattern and ball assignment tables when defining the PCB footprint; do not infer ball locations from a generic BGA drawing. Escape configuration pins, clock inputs, and transceiver differential pairs according to the manufacturer's layout guidance. Preserve symmetric routing of each differential pair, maintain the specified impedance, and minimize vias on clock and serial links.
Estimate junction temperature from the total device power, package thermal resistance, board copper area, airflow, and neighboring heat sources. The dense 484-BBGA footprint can concentrate heat under the device, so thermal-via arrays and copper-plane distribution should be evaluated during layout. Validate the assembled board at maximum expected logic, I/O, and transceiver loading rather than relying on an idle-device measurement.
Do not substitute an LX, LXT, -2, -3, or -3N ordering code solely because the package matches. Check logic resources, user I/O count, transceiver resources, temperature class, configuration bitstream, and production-grade requirements. The target listing identifies 296 user I/O, while related LX listings identify 338, confirming that package equality alone does not guarantee functional equivalence.
규정 준수 정보
A related non-T Spartan-6 listing states RoHS non-compliance and lead content, but that statement is not transferred to the exact XC6SLX150T-2FG484C ordering code. Confirm environmental declarations using the exact manufacturer documentation or a supplier certificate of conformance.