XC7A200T-3SBG484E - 215K Logic Cell Artix-7 FPGA | AMD
부품 번호: XC7A200T-3SBG484E ✓ 활성XC7A200T-3SBG484E 개요
An FPGA is a programmable semiconductor in which both the logic architecture and interconnect can be configured after manufacture. Within the product hierarchy, the XC7A200T-3SBG484E is an Artix-7 FPGA, which belongs to the broader 7 Series FPGA family and the semiconductor category. Unlike a fixed-function logic device, an FPGA can implement parallel datapaths, control logic, interfaces, and signal-processing functions that are adapted through HDL code, configuration data, and the associated development toolchain.
The 215,360 logic cells provide substantial parallel-processing capacity, while 13,455,360 RAM bits add dedicated on-chip data storage. Its 285 I/O support peripheral connectivity and high pin count in a compact 484-ball FCBGA package. These characteristics make the device suitable when a design needs more parallel logic, memory resources, or I/O than a smaller Artix-7 device can provide. The package is surface mount and requires careful ball-grid-array PCB layout, power distribution, decoupling, and thermal analysis.
The -3 speed grade is intended for designs where higher performance is preferred over lower-power operation. The Artix-7 architecture includes programmable logic, DSP48E2 slices, block RAM, mixed-referenced clocking resources, and integrated high-speed I/O. Exact resource counts and configuration details should be confirmed against the AMD Artix-7 data sheet and package pinout files before a design is released for manufacturing.
Typical applications include industrial control and automation, robotics, test and measurement, communications infrastructure, video and image processing, embedded systems with parallel data paths, and high-speed data-acquisition equipment. In these systems, the FPGA can consolidate control, interface, and preprocessing functions while reducing the number of discrete components required. Development commonly relies on AMD Vivado or compatible 7 Series design tools.
The primary design consideration is power integrity. A 484-ball BGA demands short, properly terminated power planes, local high-frequency decoupling, controlled-return current paths, and clock routing with low sensitivity to noise. Because no exposed thermal pad is identified for this package, board construction should be assessed with the manufacturer's power, thermal, and package guidance.
This page combines the device's documented Artix-7 resource figures, package information, application guidance, and pin-compatible family options with practical design considerations for engineers planning an SBG484 FPGA implementation.
드롭인 대체품: XC7A200T-3SBG484E — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
XC7A200T-2SBG484I
✅ 드롭인가격 문의
데이터시트 보기 →XC7A200T-1SBG484C
✅ 드롭인가격 문의
데이터시트 보기 →XC7A200T-3SBG484E 최대 정격 & 전기적 특성
| Device Type | Artix-7 Field-Programmable Gate Array |
| FPGA Family | Artix-7 |
| Programmable Logic Cells | 215,360 cells |
| Logic Elements | 215,360 elements |
| Number of LABs/CLBs | 16,825 LABs/CLBs |
| Total Block RAM | 13,455,360 bits |
| Block RAM | 13,140 Kb |
| User I/O | 285 I/O |
| 패키지 | SBG484 FCBGA, 19 x 19 mm |
| Ball Count | 484 balls |
| 실장 유형 | Surface Mount |
| Speed Grade | -3 |
| Temperature Grade | Extended commercial grade |
| RoHS 상태 | Compliant |
| Device Configuration | Programmable FPGA |
XC7A200T-3SBG484E sbg484 fcbga, 19 x 19 mm 핀 구성 가이드
XC7A200T-3SBG484E(sbg484 fcbga, 19 x 19 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7A200T-3SBG484E.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7A200T-3SBG484E 적합 용도: 6 애플리케이션s: Industrial Automation and Control, Robotics and Motion Systems, Test and Measurement Equipment, Data Acquisition and Signal Processing, Communications and Network Equipment, Embedded Vision and Image Processing.
Industrial Automation and Control
The AMD XC7A200T-3SBG484E fits industrial controllers that combine machine sequencing, interlocks, sensor conditioning, and communications in one FPGA. Its 215,360 logic cells can implement multiple parallel control domains, while 13,455,360 bits of block RAM support buffering and data transformation. The 285 user I/O provide substantial connectivity for encoders, discrete sensors, programmable logic controllers, and industrial communications. In a multi-axis machine, the FPGA can coordinate deterministic motion logic and pre-process feedback data concurrently. Engineering validation should cover timing margins, industrial temperature requirements, isolation boundaries, and power-supply tolerance.
추천
Robotics and Motion Systems
The XC7A200T-3SBG484E is appropriate for robotic controllers that combine motor control, sensor fusion, path processing, and real-time communications. Its 215,360 logic cells allow parallel control for several axes, and its 13,455,360 RAM bits provide useful storage for position histories, calibration tables, and sensor buffers. The -3 performance grade can help satisfy demanding control and datapath timing. Designers should use constrained clocking, plan deterministic I/O paths, and verify that external interface timing remains reliable across the full voltage and temperature range before releasing the controller for field use.
추천
Test and Measurement Equipment
The XC7A200T-3SBG484E fits test systems requiring parallel acquisition, pattern generation, real-time analysis, and instrument control. Its 215,360 logic cells and dedicated block RAM can support multiple data paths, while 285 I/O simplify connections to converters, memory, trigger logic, and communication transceivers. The -3 grade is useful for demanding timing closure in high-channel-count instruments. Layout engineers should pay particular attention to clock jitter, analog-to-digital converter timing, simultaneous switching noise, and power delivery to the 484-ball FCBGA.
추천
Data Acquisition and Signal Processing
The AMD XC7A200T-3SBG484E supports parallel signal-processing designs that must acquire, filter, transform, and packetize data in real time. Its 215,360 logic cells provide implementation capacity for wide datapaths, while 13,455,360 bits of block RAM can hold sample buffers and intermediate results. The 285 I/O allow simultaneous connection to high-rate converters and digital interfaces. Engineers should constrain input delays, use clock buffers and dedicated clock-capable pins, and verify post-route timing for the selected -3 speed grade. Vivado resource reports should confirm that routing, block RAM, DSP, and I/O demand fit simultaneously.
추천
Communications and Network Equipment
The XC7A200T-3SBG484E can implement communication line cards, protocol adapters, packet-processing engines, and test equipment. Its high logic capacity supports parallel lane handling, state machines, framing logic, and buffer management, while 13,455,360 RAM bits support packet queues and data-path storage. The 285 I/O are valuable for high-speed parallel interfaces, although SerDes usage depends on the device's specific I/O and clocking resources. Designs must establish deterministic constraints for source-synchronous interfaces and carefully control simultaneous-switching noise across the dense FCBGA power grid.
추천
Embedded Vision and Image Processing
The XC7A200T-3SBG484E is suitable for embedded vision preprocessing, where sensor data must be captured, cropped, filtered, or converted before transmission. The 215,360 logic cells can support parallel pixel pipelines, while 13,455,360 bits of block RAM accommodate line buffers and working storage. Its 285 I/O support camera, memory, and high-speed serial connectivity, subject to the electrical limits of the selected interface. Power and thermal analysis is important because image-processing pipelines can produce substantially higher dynamic power than logic-only designs. Use Vivado power estimates and post-implementation timing reports to choose clock speeds and resource architectures.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7A200T-3SBG484E — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7A200T-2SBG484I | XC7A200T-1SBG484C |
|---|---|---|---|
| Brand | AMD | AMD | AMD |
| Package | SBG484 (19 x 19 mm FCBGA) | SBG484 (19 x 19 mm FCBGA) | SBG484 (19 x 19 mm FCBGA) |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 |
| Programmable Logic Cells | 215,360 cells | 215,360 cells | 215,360 cells |
| Total Block RAM | 13,455,360 bits | 13,455,360 bits | 13,455,360 bits |
| User I/O | 285 I/O | 285 I/O | 285 I/O |
| Speed Grade | -3 | -2 | -1 |
| Temperature Suffix | E | I | C |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount |
| Number of LABs/CLBs | 16,825 LABs/CLBs | 16,825 LABs/CLBs | 16,825 LABs/CLBs |
주요 차별점
- Higher device speed grade within the same Artix-7 package family (vs XC7A200T-2SBG484I)
- Full 215,360-cell logic capacity in a 484-ball package (vs XC7A200T-1SBG484C)
- High I/O density for parallel system connections (vs XC7A200T-2SBG484I)
설계 노트
Implement a low-impedance power distribution network for the 484-ball FCBGA, with separate distribution for each device supply domain and local bulk plus high-frequency decoupling near the associated balls. Base capacitor selection on the AMD power guide and Vivado power-estimation results rather than a generic BGA checklist. Estimated internal power depends on configuration and I/O activity, so use conservative assumptions when sizing supply current. Review sequencing, ramp limits, and voltage tolerances before power is connected.
Use the AMD Artix-7 package-device pinout files as the controlling source for the SBG484 ball map and validate every power, configuration, clock, and user-I/O assignment. Place configuration pins and decoupling components where the package guidance permits short, direct connections. Keep the BGA escape geometry compatible with the selected PCB process and account for assembly inspection access. Do not reuse an FBG484 symbol without proving that the package outline, ball map, and exposed features match.
Constrain all source-synchronous and high-speed interfaces using device-specific timing models and realistic board-level uncertainty. Route clocks through capable pins, maintain symmetric matching where practical, and provide continuous return paths beneath high-speed lanes. Because the device has 285 user I/O, activity on neighboring balls can produce simultaneous-switching noise and reference-voltage disturbance. Check the power-integrity analysis after implementation and inspect worst-case voltage noise at sensitive receivers.
Estimate both junction temperature and board-level heat flow using the final configuration, clock activity, I/O toggle rates, ambient temperature, and PCB construction. The -3 speed grade can increase dynamic power relative to slower grades in the same family, so thermal validation is especially important for dense processing workloads. Account for heat from adjacent devices and use the manufacturer's PCB thermal guidance. Recheck the design if utilization, clocking, airflow, or enclosure conditions differ from the initial estimate.
규정 준수 정보
RoHS compliance is stated in product information for the exact device. No AEC-Q100 qualification is identified for this ordering code, and REACH, lead-free, halogen-free, and conflict-minerals declarations require separate confirmation.