AMD

XC7K325T-1FBG900I - 326K-Cell Kintex-7 FPGA | AMD

부품 번호: XC7K325T-1FBG900I ✓ 활성
1 V nominal Vdss 900-pin lidless FCBGA Package -1 Speed
MOQ: 1 |

XC7K325T-1FBG900I 개요

AMD XC7K325T-1FBG900I is a Kintex-7 field-programmable gate array with 326,080 programmable logic cells, 500 I/Os, a nominal 1 V core voltage, and a 900-pin lidless flip-chip ball grid array package. The -1 speed grade targets general-purpose high-performance designs, while the industrial-temperature suffix supports extended commercial deployment. It is manufactured on 28 nm CMOS technology.

A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnect can be configured after fabrication. FPGAs occupy the programmable-logic branch of the semiconductor hierarchy and combine configurable logic blocks, programmable input/output resources, block RAM, digital signal processing resources, clocking, and dedicated high-speed transceivers. The Kintex-7 family balances processing capacity, I/O density, power efficiency, and cost for demanding embedded systems.

The XC7K325T provides 326,080 logic cells and 500 user I/Os in its FBG900 package. Its 900-ball lidless FCBGA format supports dense, high-speed PCB layouts, while the 28 nm process provides the basis for the family's performance-per-watt positioning. The manufacturer identifies support for high-performance connectivity including PCIe Gen3 and 10 Gigabit Ethernet, making the device suitable for data acquisition, industrial control, networking, defense, test equipment, and high-speed signal processing.

The Kintex-7 architecture combines programmable logic with dedicated resources for memory-intensive designs and parallel signal processing. These resources allow designers to implement multiple interfaces in one device instead of combining an FPGA with several external programmable or fixed-function chips. Device configuration, clocking, memory interface implementation, and I/O standards must be selected with the Vivado design tools and the Kintex-7 package and pinout documentation.

Typical applications include PCIe endpoint and carrier-board designs, 10 Gigabit Ethernet interfaces, radio-frequency and digital communications equipment, industrial vision systems, high-speed data acquisition, software-defined radio, and embedded signal-processing platforms. Its 500-I/O capacity is particularly useful where a design combines wide parallel buses, high-speed serial links, memory interfaces, and control logic in a single package.

PCB implementation requires careful attention to the 900-ball land pattern, power and ground distribution, decoupling, high-speed routing, thermal management, and ball-assignment compatibility. Because FBG900 is a dense lidless FCBGA, assembly process capability and X-ray inspection should be reviewed before layout release. Use the AMD package pinout files and UG475 when assigning signals and validating package boundaries.

This product page combines the exact XC7K325T-1FBG900I device identity, package and resource details, same-package Kintex-7 alternatives, application guidance, and practical PCB considerations. The comparison emphasizes genuine package-compatible choices rather than implying that FPGA from unrelated architectures can be substituted without complete design verification.

드롭인 대체품: XC7K325T-1FBG900I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC7K325T-1FBG900I (동일 폼 팩터 및 풋프린트) — 차이점: Package, Process Technology, Temperature Grade, Speed Grade, Block RAM.

AMD
Package: 900-ball FCBGA, 31 x 31 mm
Process Technology: 28 nm HKMG
Temperature Grade: Commercial, 0°C to +85°C
비교 대상: XC7K325T-1FBG900I →
AMD
Package: FBG900, 900-pin lidless FCBGA
Process Technology: 28 nm
Temperature Grade: Commercial, 0°C to 85°C junction
비교 대상: XC7K325T-1FBG900I →
AMD
Package: FBG900 lidless FCBGA
Speed Grade: -2
Block RAM: 16,020 Kbit
비교 대상: XC7K325T-1FBG900I →

XC7K325T-2FBG900I

✅ 드롭인
AMD
📦 FBG900 900-pin lidless FCBGA
Kintex-7 field-programmable gate array (FPGA) · 326,080 cells · 25,475 CLBs · 840 slices · 16,020 Kbit · 16 transceivers · 500 I/Os · 900 pins

가격 문의

데이터시트 보기 →

XC7K325T-1FBG900C

✅ 드롭인 ⚠️ 사양 미검증
AMD
📦 FBG900 900-pin lidless FCBGA
Kintex-7 FPGA · 326,080 cells · 25,475 blocks · 840 slices · 16,020 Kb · 500 I/Os · 16 transceivers · 12.5 Gb/s per lane

가격 문의

데이터시트 보기 →

XC7K325T-2FBG900C

✅ 드롭인 ⚠️ 사양 미검증
AMD
📦 FBG900 900-pin lidless FCBGA
Kintex-7 · 326,080 cells · 16,020 Kb · 840 slices · 500 I/O · 28 nm · 1 V · -2

가격 문의

데이터시트 보기 →

XC7K325T-3FBG900I

✅ 드롭인 ⚠️ 사양 미검증
📦 FBG900 900-pin lidless FCBGA
Speed grade changes from -1 to -3 while the industrial temperature grade and FBG900 package are retained

📋 참조 대체품 (카탈로그에 없음)

XC7K325T-3FBG900C

✅ 드롭인 ⚠️ 사양 미검증
📦 FBG900 900-pin lidless FCBGA
Speed grade changes from -1 to -3 and temperature grade changes from industrial to commercial; FBG900 package is retained

📋 참조 대체품 (카탈로그에 없음)

XC7K325T-1FBG900I 최대 정격 & 전기적 특성

Programmable Logic Cells 326,080 cells
User I/O Count 500 I/Os
Logic Block Count 25,475 CLBs
Process Technology 28 nm CMOS
Core Voltage 1 V nominal
Device Family Kintex-7
Speed Grade -1
Temperature Grade Industrial
패키지 900-pin lidless FCBGA
Package Designation FBG900
실장 유형 Surface Mount
Packaging Type Tray
High-Speed Serial Support PCIe Gen3 and 10 Gigabit Ethernet

XC7K325T-1FBG900I fbg900 핀 구성 가이드

XC7K325T-1FBG900I(fbg900 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC7K325T-1FBG900I의 fbg900 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC7K325T-1FBG900I.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC7K325T-1FBG900I 적합 용도: 6 애플리케이션s: PCIe Gen3 Endpoint Systems, 10 Gigabit Ethernet Equipment, Industrial Vision and Inspection, High-Speed Data Acquisition, Software-Defined Radio and Communications, Aerospace and Defense Processing.

🖥️

PCIe Gen3 Endpoint Systems

The XC7K325T-1FBG900I fits PCIe Gen3 endpoint and accelerator designs because the Kintex-7 family supports high-speed connectivity while providing 326,080 programmable logic cells and 500 user I/Os. Engineers can place the endpoint logic, DMA control, memory interfaces, status monitoring, and application-specific processing in one device. The FBG900 package offers a dense ball assignment for wide parallel buses and high-speed serial routing, but the board must follow the package-specific escape-routing and reference-clock guidance. Vivado implementation and post-route timing analysis should confirm lane performance, reference-clock quality, power integrity, and the selected -1 speed-grade margin before hardware release.

🌐

10 Gigabit Ethernet Equipment

The XC7K325T-1FBG900I is suitable for 10 Gigabit Ethernet line cards, protocol engines, traffic analyzers, and secure network appliances. Its 326,080 logic cells provide substantial capacity for packet processing, queues, headers, encryption engines, and management logic, while the 500-I/O count supports status LEDs, control processors, and external interfaces. The Kintex-7 family's 10 Gigabit Ethernet capability reduces the need for separate interface devices. Designers should use AMD's package pinout files to place high-speed pairs correctly, preserve continuous reference-clock and power planes, and validate the -1 speed grade against packet-rate latency and timing targets.

🏭

Industrial Vision and Inspection

The XC7K325T-1FBG900I fits industrial machine-vision and inspection systems requiring parallel camera inputs, real-time processing, and network or storage connectivity. The 500 user I/Os can accommodate digital camera interfaces, encoders, triggers, illumination controls, and diagnostic signals, while the large logic-cell count supports image pipelines and control algorithms. The industrial-temperature designation supports use in temperature-controlled factory environments, subject to the exact operating-range limits in the manufacturer datasheet. PCB layout should separate sensitive clock and serial routes from motors and switching supplies, and power sequencing must follow the device configuration requirements.

📺

High-Speed Data Acquisition

The XC7K325T-1FBG900I is well suited to high-speed data-acquisition instruments that combine many acquisition channels with real-time FPGA processing. Its 326,080 logic cells and 500 I/Os allow multiple ADC or DAC interfaces, digital triggers, local data capture, and protocol conversion to be implemented in parallel. Block RAM, DSP resources, and high-speed serial links can be used according to the selected architecture, although their exact capacities must be confirmed in the datasheet. Signal-integrity planning is essential: controlled-impedance routes, solid return planes, careful decoupling, and matched clock distribution are required to preserve acquisition fidelity.

📡

Software-Defined Radio and Communications

The XC7K325T-1FBG900I can implement software-defined radio, communications, and digital signal-processing functions where parallel sample paths and programmable logic must coexist in one package. The Kintex-7 architecture is designed for high-performance logic and DSP workloads, and the device's 500 I/Os provide connectivity for converters, clock sources, control channels, and high-speed serial interfaces. Engineers should use AMD's recommended transceiver and memory-interface methods, maintain impedance-controlled reference-clock routing, and reserve appropriate decoupling around each supply domain. Post-route timing, signal-integrity simulation, and thermal testing are required to establish reliable radio performance.

✈️

Aerospace and Defense Processing

The XC7K325T-1FBG900I supports high-reliability embedded-processing concepts because its industrial-temperature Kintex-7 configuration combines substantial programmable logic with 500 I/Os and high-speed connectivity. Potential tasks include radar signal conditioning, navigation processing, communications framing, sensor fusion preprocessing, and secure data handling. Actual aerospace or defense deployment requires project-specific qualification, radiation analysis, environmental testing, and controlled configuration management because the standard industrial part designation alone does not establish a space-grade qualification. Designers should also verify supply continuity and obtain the current AMD product and compliance documentation before freezing the bill of materials.

추천 제품 요약

XC7K325T-1FFG900I Same Kintex-7 resource configuration in a different package 사용처: PCIe Gen3 Endpoint Systems, 10 Gigabit Ethernet Equipment, Software-Defined Radio and Communications XC7K325T-2FFG900I AMD 사용처: PCIe Gen3 Endpoint Systems, 10 Gigabit Ethernet Equipment, Software-Defined Radio and Communications XC7K325T-1FBG900I4316 Exact device-family listing with an additional ordering suffix 사용처: Industrial Vision and Inspection XC7K325T-1FBG900C AMD 사용처: Industrial Vision and Inspection XC7K325T-2FBG900I AMD 사용처: High-Speed Data Acquisition XC7K325T-3FBG900I Same-package higher-speed industrial option 사용처: High-Speed Data Acquisition, Aerospace and Defense Processing XC7K325T-3FBG900C Same-package alternative with commercial temperature grade 사용처: Aerospace and Defense Processing
What is the AMD XC7K325T-1FBG900I?
The AMD XC7K325T-1FBG900I is a Kintex-7 field-programmable gate array with 326,080 programmable logic cells, 500 user I/Os, and a 900-pin lidless FCBGA package. According to the AMD Kintex-7 product page and the manufacturer datasheet, it uses 28 nm CMOS technology and supports high-performance connectivity such as PCIe Gen3 and 10 Gigabit Ethernet. The -1 suffix identifies the speed grade, while the I suffix identifies the industrial-temperature configuration.
Where can I download the XC7K325T-1FBG900I datasheet PDF?
The XC7K325T-1FBG900I datasheet and package information are available from AMD through the Kintex-7 product page and the linked package-pinout resources. The product datasheet describes the device architecture, electrical characteristics, speed grades, and package options, while the package pinout files provide the authoritative ball assignments. Use the FBG900 package files together with UG475 when creating the PCB footprint and verifying every power, ground, configuration, and user I/O connection.
Where is the XC7K325T-1FBG900I pinout?
The XC7K325T-1FBG900I pinout is published in AMD's Kintex-7 package pinout files and described by UG475. Because FBG900 has 900 balls, engineers should use the package-specific ASCII or CSV files rather than reconstructing the map from a generic diagram. Start with the exact XC7K325T-1FBG900I device selection, verify its FBG900 package, and cross-check each signal against the corresponding configuration, power, ground, and reference-clock balls.
What are the key specifications of XC7K325T-1FBG900I that engineers should know?
The principal specifications of the XC7K325T-1FBG900I are 326,080 programmable logic cells, 25,475 configurable logic blocks, 500 user I/Os, 1 V nominal core voltage, and 28 nm CMOS fabrication. According to the manufacturer datasheet, the device is packaged in a 900-pin lidless FCBGA designated FBG900. The -1 speed grade and industrial-temperature suffix must also be retained during design, sourcing, and PCB qualification because they distinguish this configuration from other Kintex-7 variants.
Is XC7K325T-1FBG900I suitable for PCIe Gen3 and 10 Gigabit Ethernet designs?
Yes, the XC7K325T-1FBG900I is suitable for PCIe Gen3 and 10 Gigabit Ethernet implementations because the Kintex-7 family supports these high-speed connectivity standards. Its 500 user I/Os also allow substantial parallel and control connectivity alongside the serial interfaces. Actual lane count, reference-clock topology, pin assignments, and transceiver settings must be validated in Vivado against the selected FBG900 package and board-level clock and power design.
XC7K325T-1FBG900I vs XC7K325T-2FBG900I — which speed grade should I choose?
Choose XC7K325T-1FBG900I when the -1 speed grade satisfies the design's timing and throughput requirements and operating conditions are better matched by the industrial-temperature version. Choose XC7K325T-2FBG900I when its higher performance grade is needed to close timing at demanding clock rates. Both devices use the same 326,080-cell Kintex-7 architecture and FBG900 package family, but the speed-grade change can affect timing margins, power, qualification, and system performance.
When should I choose XC7K325T-1FBG900I over XC7K325T-2FBG900I?
Choose XC7K325T-1FBG900I when the design closes timing at the -1 performance target and using a lower speed grade provides a better balance of electrical performance, qualification, or lifecycle considerations. Select XC7K325T-2FBG900I when a higher speed grade is required for difficult timing closure, increased interface rates, or additional processing headroom. A timing report generated by Vivado is the appropriate way to determine whether the -1 grade meets the system requirement.
What is the best drop-in replacement for XC7K325T-1FBG900I?
The closest same-package choices are other XC7K325T FBG900 configurations, including XC7K325T-2FBG900I, XC7K325T-1FBG900C, XC7K325T-2FBG900C, and XC7K325T-3FBG900I. Their suitability depends on speed grade, temperature grade, timing margin, and qualification requirements. FFG900 and FBV900 devices are not direct replacements because their package assignments differ; any substitute must be checked against the complete ball map, power architecture, configuration interface, and timing constraints.
Can XC7K325T-2FBG900I replace XC7K325T-1FBG900I?
Yes, XC7K325T-2FBG900I can replace XC7K325T-1FBG900I when the higher -2 speed grade is acceptable and the two devices have matching FBG900 ball assignments, power requirements, and configuration setup. The package and FPGA architecture remain compatible, but the replacement must still pass Vivado timing analysis and board-level validation. Differences in speed-related power, startup behavior, temperature grade, and qualification must be checked before substitution.
Is XC7K325T-1FBG900I the same as XC7K325T-1FFG900I?
No, XC7K325T-1FBG900I and XC7K325T-1FFG900I have different package assignments. The target device uses the 900-pin FBG900 lidless FCBGA, whereas XC7K325T-1FFG900I uses the FFG900 package. Although both implement the Kintex-7 family and may have similar logic resources, a PCB designed for one package is not automatically compatible with the other; ball maps, mechanical dimensions, and escape-routing requirements must be compared.
What can replace XC7K325T-1FBG900I in an existing design?
An XC7K325T device in the same FBG900 package is the primary replacement family because it preserves the package architecture. XC7K325T-2FBG900I is a speed-grade alternative, while the -1FBG900C, -2FBG900C, and -3FBG900I variants change speed or temperature characteristics. AMD states that 7 series FPGA pin compatibility applies only to devices of the same family in the same package, so changing FBG900 to FFG900 requires a PCB redesign rather than a simple component substitution.
Where can I buy XC7K325T-1FBG900I online?
Use the Request a Quote form on this page to request XC7K325T-1FBG900I availability, current commercial terms, and delivery information. Quote requests should include the exact MPN, FBG900 package, industrial-temperature suffix, -1 speed grade, and required tray quantity. The device should be matched by its complete ordering code so that speed grade, temperature grade, package, and packaging configuration remain unchanged.
What is the price of XC7K325T-1FBG900I?
The current commercial price for XC7K325T-1FBG900I is generated through the Request a Quote form on this page. A complete quote should use the exact ordering code, including the -1 speed grade, FBG900 package, industrial-temperature suffix, and tray packaging requirement. Because programmed FPGA pricing and availability can vary with configuration, quantity, and delivery schedule, request the current unit and volume-break terms rather than relying on a historical catalog amount.
What is the lead time and is XC7K325T-1FBG900I in stock?
The current stock position and lead time for XC7K325T-1FBG900I should be confirmed through the Request a Quote form on this page. Include the exact MPN, quantity, and packaging format in the request to obtain a meaningful allocation and schedule. The device is identified as an AMD Kintex-7 FPGA in a 900-pin lidless FCBGA tray, but current inventory and manufacturing allocation are commercial variables that require confirmation.
Is XC7K325T-1FBG900I compliant with RoHS and REACH?
The RoHS and REACH status of XC7K325T-1FBG900I must be confirmed from AMD's current product compliance documentation for the exact ordering code. According to the manufacturer datasheet, the device is an industrial-grade Kintex-7 FPGA in a 900-pin lidless FCBGA, but package and environmental qualification do not by themselves establish every regional material declaration. Request the current compliance statement before incorporating the part into a regulated production design.

엔지니어링 참조 데이터: XC7K325T-1FBG900I — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose XC7K325T-1FBG900I when a design needs the 326,080-cell Kintex-7 architecture, 500 user I/Os, high-speed serial connectivity, and an industrial-temperature FBG900 configuration but does not require a faster speed grade. Select XC7K325T-2FBG900I or XC7K325T-3FBG900I when Vivado timing analysis shows that the -1 grade cannot provide sufficient timing margin, while accepting the changed power and qualification implications. Use XC7K325T-1FBG900C only when the narrower commercial-temperature operating range is acceptable. Do not substitute FFG900, FBV900, or non-Kintex-7 devices as direct drop-ins: even devices with similar logic capacity can have different ball maps, power arrangements, configuration pins, and high-speed transceiver assignments.

대체품과의 비교

파라미터 이 제품 XC7K325T-2FBG900I XC7K325T-1FBG900C XC7K325T-2FBG900C XC7K325T-3FBG900I XC7K325T-3FBG900C
Brand AMD AMD AMD AMD AMD AMD
Package FBG900 900-pin lidless FCBGA FBG900 900-pin lidless FCBGA FBG900 900-pin lidless FCBGA FBG900 900-pin lidless FCBGA FBG900 900-pin lidless FCBGA FBG900 900-pin lidless FCBGA
Programmable Logic Cells 326,080 cells 326,080 cells 326,080 cells 326,080 cells 326,080 cells 326,080 cells
User I/O Count 500 I/Os 500 I/Os 500 I/Os 500 I/Os 500 I/Os 500 I/Os
Process Technology 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS
Core Voltage 1 V nominal 1 V nominal 1 V nominal 1 V nominal 1 V nominal 1 V nominal
Speed Grade -1 -2 -1 -2 -3 -3
Temperature Grade Industrial Industrial Commercial Commercial Industrial Commercial
High-Speed Connectivity PCIe Gen3 and 10 Gigabit Ethernet PCIe Gen3 and 10 Gigabit Ethernet PCIe Gen3 and 10 Gigabit Ethernet PCIe Gen3 and 10 Gigabit Ethernet PCIe Gen3 and 10 Gigabit Ethernet PCIe Gen3 and 10 Gigabit Ethernet

주요 차별점

  • Industrial-temperature option preserves operation beyond a commercial-grade configuration (vs XC7K325T-1FBG900C)
  • Lower speed grade can reduce timing and power pressure when the design does not require maximum performance (vs XC7K325T-2FBG900I)
  • Maintains a dense 500-I/O interface in the same package family (vs XC7K325T-3FBG900I)

설계 노트

Use the AMD FBG900 package pinout files and UG475 as the controlling references for all 900-ball assignments. Preserve the package-specific escape-routing geometry, account for lidless FCBGA assembly tolerances, and confirm that every power, ground, configuration, clock, and user-I/O ball matches the selected device. A generic Kintex-7 schematic symbol is insufficient for a 900-ball package because small ball-map differences can create assembly or boot failures.

Plan each supply rail using the manufacturer's recommended decoupling, voltage sequencing, and power-plane construction. Place bulk and high-frequency decoupling close to the relevant device balls and provide low-impedance paths for simultaneous switching current. Because the XC7K325T-1FBG900I can process substantially more logic and I/O than a small FPGA, verify regulator headroom and transient response for the -1 speed grade rather than relying only on nominal current requirements.

Treat the lidless 900-ball FCBGA as a major heat-transfer path and evaluate the PCB stack, copper planes, via arrays, heat spreaders, airflow, and surrounding heat sources. Run Vivado thermal analysis with realistic utilization and activity assumptions, then confirm the operating envelope with board-level thermal testing. Do not infer junction-temperature margin from the ambient rating alone because package construction, power density, PCB copper, and enclosure conditions materially affect thermal performance.

Route high-speed serial links, reference clocks, and memory interfaces as controlled-impedance structures over continuous reference planes. Keep supply and ground planes continuous beneath signal layers, avoid reference-plane splits, and follow AMD's recommended spacing and via-transition guidance. Validate the final stack-up with field solvers and the assembled board with SI measurements; Vivado timing analysis alone cannot identify all package, connector, via, or PCB loss effects.

Avoid treating a package-suffix change as an automatic qualification. Replacing the industrial -1 device with a commercial-temperature variant can narrow the operating-temperature range, while changing to the -2 or -3 speed grade can alter power and timing behavior. Re-run synthesis, implementation, timing, thermal, and board validation for the exact ordering code. Also confirm that configuration memory, boot mode, JTAG access, and the complete bill of materials remain unchanged.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The industrial-temperature suffix does not by itself indicate AEC-Q100 qualification. Current RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be requested from AMD for the exact ordering code.

관련 검색

xc7k325t 1fbg900i xc7k325t datasheet xc7k325t development board xc7k325t 2ffg900i xc7k325t 2ffg900c xc7k325t 2ffg676i xc7k325t 2ffg676c xc7k325t 1fbg676c xc7k325t 1fbg676i XC7K325T-1FBG900I datasheet PDF XC7K325T-1FBG900I pinout XC7K325T-1FBG900I replacement XC7K325T-1FBG900I vs XC7K325T-2FBG900I AMD XC7K325T-1FBG900I XC7K325T-1FBG900I price

관련 부품 & 용어

AMD Xilinx XC7K325T-1FBG900I XC7K325T-2FBG900I XC7K325T-1FBG900C XC7K325T-2FBG900C XC7K325T-3FBG900I XC7K325T-3FBG900C Kintex-7 field-programmable gate array FPGA programmable logic semiconductor 326,080 logic cells 500 user I/Os 25,475 CLBs 28 nm CMOS 1 V core voltage FBG900 900-pin lidless FCBGA PCIe Gen3 10 Gigabit Ethernet UG475 Vivado
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기