XCKU11P-2FFVD900I - 653K LE Kintex UltraScale+ FPGA | AMD
부품 번호: XCKU11P-2FFVD900I ✓ 활성XCKU11P-2FFVD900I 개요
A Kintex UltraScale+ FPGA belongs to the FPGA > programmable logic > semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA implements digital logic through configurable LUTs, flip-flops, block RAM, DSP resources, programmable I/O, and high-speed serial transceivers. These resources can be interconnected in a device-specific architecture and configured by loading a programmable logic bitstream.
The XCKU11P combines a logic-element count of 653,100 with 408 user I/O pins, enabling complex parallel interfaces alongside programmable logic and memory-intensive data processing. Its 37,320 LAB/CLB blocks and 53,964,800 RAM bits provide substantial storage for packet buffering, digital signal processing, control-plane logic, and accelerator functions. The manufacturer documentation also provides UltraScale+ package pinout files in ASCII TXT and CSV formats.
The 900-BBGA FCBGA package makes this device suitable for dense board-level implementations where hundreds of package balls support power, ground, configuration, user I/O, and high-speed interface connections. Board design must follow the exact FFVD900 package data, including ball assignments, power-plane requirements, decoupling, and the manufacturer’s thermal design guidance. Package pinout resources should be used as the authoritative source when assigning PCB tracks.
Typical applications include telecommunications and 5G infrastructure, medical imaging, industrial automation, aerospace and defense systems, and research platforms. The combination of configurable logic, programmable I/O, substantial RAM, and a large BGA package is particularly useful where several digital subsystems must be consolidated without implementing them as fixed logic.
Designers should treat FPGA configuration, clocking, power sequencing, and thermal management as system-level concerns rather than device-only tasks. Validate the selected bitstream against the exact speed grade, package, and industrial-temperature ordering information. Because a different package or speed grade changes PCB compatibility or timing behavior, a replacement should be accepted only after a complete package, pin, timing, and power review.
This product page combines manufacturer documentation, exact MPN identifiers, lifecycle-oriented sourcing guidance, verified comparison candidates, and practical BGA implementation considerations. It also distinguishes a true same-footprint speed-grade alternative from devices that share the Kintex UltraScale+ family but require a different package or board layout.
드롭인 대체품: XCKU11P-2FFVD900I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XCKU11P-2FFVD900I (동일 폼 팩터 및 풋프린트) — 차이점: Block RAM, Logic Elements, Package.
XCKU11P-1FFVD900I
✅ 드롭인가격 문의
데이터시트 보기 →XCKU11P-2FFVD900I 최대 정격 & 전기적 특성
| Device Type | Kintex UltraScale+ FPGA |
| Logic Elements | 653,100 |
| LAB/CLB Count | 37,320 |
| Total RAM Bits | 53,964,800 bits |
| User I/O Pins | 408 pins |
| Performance Speed Grade | -2 |
| Temperature Grade | Industrial |
| Junction Temperature Range | -40 °C to 100 °C |
| 패키지 | 900-BBGA FCBGA |
| 실장 유형 | Surface Mount |
| Programmable Logic | Configurable FPGA |
| Block RAM | 53,964,800 total RAM bits |
| Logic Blocks | 37,320 LAB/CLB blocks |
XCKU11P-2FFVD900I 900-bbga fcbga 핀 구성 가이드
XCKU11P-2FFVD900I(900-bbga fcbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XCKU11P-2FFVD900I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XCKU11P-2FFVD900I 적합 용도: 6 애플리케이션s: 5G Telecommunications Infrastructure, Medical Imaging and Diagnostics, Industrial Automation and Control, Aerospace and Defense Systems, Research and FPGA Prototyping, High-Speed Data Acquisition.
5G Telecommunications Infrastructure
The XCKU11P-2FFVD900I fits 5G infrastructure designs requiring programmable packet handling, control logic, and parallel external interfaces. Its 653,100 logic elements provide substantial capacity for protocol processing, while 37,320 LAB/CLB blocks and 53,964,800 RAM bits support buffering and time-critical datapaths. The 408 user I/O pins simplify connections to network processors, converters, clocking devices, and test equipment. The -2 speed grade is important when a design has been qualified against tighter timing margins. Board implementation should use AMD’s FFVD900 pinout files, preserve adequate power and ground connectivity, and complete thermal validation under worst-case telecom operating conditions.
추천
Medical Imaging and Diagnostics
The XCKU11P-2FFVD900I can support medical imaging and diagnostic equipment that combines high-volume parallel data acquisition, control functions, and programmable signal processing. The 408 user I/O pins are useful for camera interfaces, ADC or DAC connections, and digital sensor links, while the FPGA’s 53,964,800 RAM bits support frame and line buffers. The industrial-temperature ordering code specifies a -40 °C to 100 °C junction range, which must be checked against the complete medical system thermal profile. Designers should establish signal-integrity margins, implement deterministic clocking and synchronization, and document worst-case latency and error-detection behavior as part of system verification.
추천
Industrial Automation and Control
The XCKU11P-2FFVD900I suits industrial automation systems that combine machine control, sensor conditioning, motion-related data paths, communications, and safety monitoring in one programmable device. Its 653,100 logic elements allow multiple control domains to be consolidated, while 408 user I/O pins provide extensive connectivity to sensors, actuators, counters, and communication transceivers. The -2 speed grade supports designs whose timing closure depends on the higher grade. For production implementation, use the exact FFVD900 ball map, isolate noisy power domains, apply the manufacturer’s decoupling recommendations, and verify temperature rise under fully loaded industrial control activity rather than relying only on simulation results.
추천
Aerospace and Defense Systems
The XCKU11P-2FFVD900I is applicable to aerospace and defense electronics when a programmable architecture can simplify adaptation across different payload, sensor, or communication configurations. The large logic-element and RAM resources support parallel acquisition, embedded control, data reduction, and interface aggregation, while the 408 user I/O pins accommodate multiple external subsystems. The -2 speed grade provides a defined performance class for timing-sensitive designs, but system qualification must also assess radiation, temperature, shock, supply integrity, and component provenance separately. Engineers should use AMD’s exact package files and create a controlled bitstream, configuration, and hardware-in-the-loop verification process for each deployed configuration.
추천
Research and FPGA Prototyping
The XCKU11P-2FFVD900I provides a capable research platform for algorithms, processor architectures, high-speed interfaces, and heterogeneous digital systems. Its 37,320 LAB/CLB blocks, 53,964,800 RAM bits, and 408 user I/O pins allow researchers to construct complete prototypes rather than isolated logic demonstrations. The -2 speed grade is useful when comparing timing behavior across Kintex UltraScale+ implementations, while the industrial-temperature designation supports controlled laboratory platforms and industrial test environments. A reproducible research flow should archive the exact device part number, Vivado or equivalent tool release, bitstream checksum, constraint files, clocking plan, and board revision so later measurements remain comparable.
추천
High-Speed Data Acquisition
The XCKU11P-2FFVD900I is well suited to high-speed data-acquisition systems that must accept multiple streams, perform real-time filtering or formatting, and transfer results through parallel or serial links. Its 408 user I/O pins support broad sensor and converter connectivity, while 53,964,800 RAM bits provide dedicated buffering capacity. The -2 grade is appropriate for designs with demanding timing paths, subject to complete timing analysis. Layout should separate sensitive clock and acquisition paths from switching noise, use controlled impedance for high-speed links, and include FPGA-based monitoring where practical. Power sequencing, decoupling, and thermal performance require board-level validation under the highest expected sample rate and sustained transfer activity.
추천
엔지니어링 참조 데이터: XCKU11P-2FFVD900I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XCKU11P-1FFVD900I |
|---|---|---|
| Package | 900-BBGA FCBGA | 900-BBGA FCBGA |
| Brand | AMD | AMD |
| Device Family | Kintex UltraScale+ | Kintex UltraScale+ |
| Performance Speed Grade | -2 | -1 |
| Logic Elements | 653,100 | 653,100 |
| LAB/CLB Count | 37,320 | 37,320 |
| Total RAM Bits | 53,964,800 bits | 53,964,800 bits |
| User I/O Pins | 408 pins | 408 pins |
주요 차별점
- Uses the higher -2 performance speed grade (vs XCKU11P-1FFVD900I)
- Combines high logic capacity with extensive external connectivity (vs XCKU11P-1FFVD900I)
- Substantial integrated RAM for buffering and data processing (vs XCKU11P-1FFVD900I)
설계 노트
Create the PCB footprint from the AMD FFVD900 package data rather than from a generic 900-ball BGA library. Confirm ball pitch, ball diameter, pad and solder-mask definitions, component orientation, and the physical package outline against the exact package drawing. Route every power and ground ball specified by the pinout file, and use the manufacturer’s layer-transition guidance for escape routing. A footprint error can affect soldering, signal integrity, and thermal performance even when the FPGA configuration itself is correct.
Implement separate power distribution for core and I/O requirements, with local high-frequency decoupling placed according to AMD’s recommended schematic and layout guidance. Keep the FFVD900 ground connections as short and low-impedance as practical, and plan voltage-regulator sequencing so no supply ramp violates the device’s electrical limits. Review steady-state and transient current in the final configuration because utilization of logic, RAM, transceivers, and I/O changes the actual power demand.
Validate junction temperature with the final PCB stack-up, copper planes, airflow, enclosure, and worst-case switching activity. The XCKU11P-2FFVD900I is specified for a -40 °C to 100 °C junction range, so ambient temperature alone cannot establish thermal acceptability. Use the manufacturer’s power and thermal models, inspect the assembled package with thermal imaging where practical, and confirm that nearby heat sources do not consume the available temperature margin.
Preserve return paths beneath high-speed interfaces and separate clocks from noisy data routing where practical. Apply AMD’s recommended device pinout and routing constraints to every transceiver, memory, and configuration signal. The target’s 408 user I/O pins require disciplined lane planning so that board constraints, fixed package locations, and design timing remain consistent. Before fabrication, run timing and signal-integrity sign-off with the exact speed grade because a -1 replacement can change timing margins.
규정 준수 정보
The industrial-temperature designation does not establish AEC-Q100 qualification. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status from the current AMD declarations for the exact ordering code.