XMC1402F064X0200AAXUMA1 - 48MHz Cortex-M0 MCU | Infineon
부품 번호: XMC1402F064X0200AAXUMA1 ✓ 활성XMC1402F064X0200AAXUMA1 개요
An MCU is a programmable system-on-chip used to acquire sensor inputs, execute control algorithms, operate communication peripherals, and manage actuators. The XMC1000 family belongs to the embedded microcontroller hierarchy: MCU → 32-bit microcontroller → ARM Cortex-M0 microcontroller → industrial control MCU. Infineon positions the XMC1402 for cost-sensitive embedded applications where deterministic control, general-purpose peripheral integration, and a compact 64-pin package are important.
Key device attributes include 48 MHz Cortex-M0 processing, 200 KB of flash, 16 KB of SRAM, and hardware-assisted mathematical computation. The 200 KB flash provides room for application code, configuration data, and boot routines, while the 16 KB SRAM supports working memory and real-time control tasks. The 64-pin LQFP package also provides a larger pin count than small QFN packages, facilitating accessible routing and prototyping on conventional printed circuit boards.
The device belongs to Infineon's XMC1000 industrial microcontroller family. Its Cortex-M0 architecture provides a common instruction set and compact processing core suitable for embedded control. The hardware MATH coprocessor offloads supported mathematical operations from the main core, potentially reducing execution time in control, signal-processing, and calculation-heavy routines. This architecture supports deterministic embedded workloads without requiring a separate digital signal processor.
Typical uses include industrial sensor controllers, motor and actuator control equipment, building automation modules, power-conversion controllers, communication gateways, and compact embedded platforms requiring multiple peripheral connections. The LQFP-64 package is particularly useful when a design needs adequate I/O access, prototyping visibility, or conventional pick-and-place assembly rather than a very small board footprint.
Designers should account for pin multiplexing, supply decoupling, clock configuration, programming interface requirements, and the operating conditions of connected sensors and actuators. Firmware should also use the Infineon pin-description table and reference documentation to assign every package pin correctly, particularly for functions that can be routed to several alternate pins.
This page combines manufacturer specifications, memory and package details, practical industrial-control applications, replacement considerations, and PCB-focused design guidance. It also distinguishes confirmed drop-in options from variants that require package or firmware changes, helping engineers evaluate replacement decisions before committing to a PCB revision.
드롭인 대체품: XMC1402F064X0200AAXUMA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청XMC1402F064X0200AAXUMA1 최대 정격 & 전기적 특성
| Product Type | 32-bit industrial microcontroller (MCU) |
| CPU Core | ARM Cortex-M0 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 200 KB |
| Flash Organization | 200K x 8 bits |
| SRAM | 16 KB |
| Math Coprocessor | Yes, hardware MATH coprocessor |
| 동작 공급 전압 | 1.8 V to 5.5 V |
| Nominal Supply Options | 3.3 V / 5 V |
| 패키지 | 64-pin LQFP, 10 mm x 10 mm |
| Package Type | PG-LQFP-64 |
| 실장 유형 | Surface mount |
| Packaging | Tape and reel |
| Application Segment | Industrial control applications |
| RoHS 상태 | Compliant |
XMC1402F064X0200AAXUMA1 pg-lqfp-64 핀 구성 가이드
XMC1402F064X0200AAXUMA1(pg-lqfp-64 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XMC1402F064X0200AAXUMA1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XMC1402F064X0200AAXUMA1 적합 용도: 6 애플리케이션s: Industrial Sensor and Actuator Controller, Building Automation and HVAC Control, Motor Control and Positioning, Power Conversion and Energy Control, Communication Gateway and Protocol Bridge, IoT Edge and Environmental Monitoring.
Industrial Sensor and Actuator Controller
The XMC1402F064X0200AAXUMA1 fits industrial sensor-and-actuator modules that acquire measurements, run control calculations, and operate external outputs. Its 48 MHz Cortex-M0 core provides dedicated execution capacity, while 200 KB of flash holds application firmware, configuration tables, and calibration data. The hardware MATH coprocessor can accelerate supported arithmetic operations involved in scaling, filtering, or closed-loop calculations. A 1.8 V to 5.5 V supply range allows the controller to operate across common embedded industrial rails, although each attached sensor must remain compatible with the selected logic voltage. The 64-pin LQFP package also provides enough external connections for several digital inputs, communications, status indicators, and actuator drivers without requiring a very fine-pitch land pattern.
추천
Building Automation and HVAC Control
The XMC1402F064X0200AAXUMA1 is suitable for building-automation nodes that monitor environmental inputs, coordinate actuators, and maintain local control logic. Its 16 KB of SRAM can hold sensor buffers, schedules, and control state, while the 200 KB flash provides room for protocol handlers and configuration data. The Cortex-M0 core operates at 48 MHz, allowing responsive multitasking when the firmware handles digital sensors, communication links, and time-based control functions. Operating from 1.8 V to 5.5 V gives designers flexibility around low-voltage sensors and common control rails. Its LQFP-64 format is especially practical for equipment with repeated service cycles because pins, traces, and probe points are easier to access than those of a very small VQFN package.
추천
Motor Control and Positioning
The XMC1402F064X0200AAXUMA1 can serve as the supervisory controller in a positioning or motor-control subsystem when the design requires deterministic embedded processing and hardware-assisted mathematics. The 48 MHz Cortex-M0 core executes motion logic, while the hardware MATH coprocessor accelerates supported calculations that would otherwise occupy core cycles. Its 200 KB of flash can store motion tables, state-machine logic, and tuning parameters, and the 16 KB SRAM supports current control, position, velocity, and diagnostic variables. The 1.8 V to 5.5 V operating range supports integration with low-voltage logic domains, while the 64-pin LQFP package exposes the ports and communication signals needed to interface with a dedicated gate driver, position sensor, and system supervisor.
추천
Power Conversion and Energy Control
The XMC1402F064X0200AAXUMA1 can be used in supervisory power-conversion equipment where firmware performs measurement processing, fault management, and operating-mode control. The 48 MHz Cortex-M0 core provides sufficient throughput for multi-loop control and communication tasks, while the hardware MATH coprocessor supports arithmetic-heavy control calculations. Its 200 KB flash stores control tables, compensation parameters, and communication protocols, and 16 KB SRAM accommodates sampled values and control state. The broad 1.8 V to 5.5 V operating range permits use with low-voltage digital control circuits, provided the MCU ground and signal levels are correctly referenced. Its exposed LQFP footprint also improves inspection and rework compared with a compact VQFN package.
추천
Communication Gateway and Protocol Bridge
The XMC1402F064X0200AAXUMA1 fits compact protocol-conversion equipment that must translate between local sensor data, fieldbus traffic, and a host processor. Its 200 KB of flash can hold several protocol stacks, configuration profiles, and firmware update images, while 16 KB of SRAM supports packet buffering and communication state. The 48 MHz Cortex-M0 core handles simultaneous serial processing and application logic, and the hardware MATH coprocessor can accelerate supported scaling and data-conditioning operations. The 64-pin LQFP package provides practical access to the required communications and control pins during prototype assembly. Firmware designers should confirm the exact peripheral mix and alternate-function mapping in the Infineon pin-description table before committing the board layout.
추천
IoT Edge and Environmental Monitoring
The XMC1402F064X0200AAXUMA1 is appropriate for compact IoT edge nodes that sample environmental sensors, run local filtering or threshold logic, and forward results over a local communications link. Its 16 KB SRAM can support sample buffers, protocol state, and device runtime variables, while 200 KB of flash provides room for drivers, application logic, and firmware revisions. The 48 MHz Cortex-M0 core permits responsive timeouts and peripheral handling, and the hardware MATH coprocessor accelerates supported arithmetic in scaling, filtering, and compensation routines. A 1.8 V to 5.5 V operating range simplifies integration with low-voltage sensors, although the chosen regulator must account for radio, sensor, and MCU peak load. The LQFP-64 package also improves prototype accessibility.
추천
추천 제품 요약
엔지니어링 참조 데이터: XMC1402F064X0200AAXUMA1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 64-pin LQFP, 10 mm x 10 mm |
| Brand | Infineon Technologies |
| CPU Core | ARM Cortex-M0 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 200 KB |
| SRAM | 16 KB |
| Operating Supply Voltage | 1.8 V to 5.5 V |
| Math Coprocessor | Yes, hardware MATH coprocessor |
| Application Segment | Industrial control |
주요 차별점
- Integrated hardware arithmetic acceleration (vs XMC1402Q064X0200AAXUMA1)
- 200 KB flash and 16 KB SRAM in an LQFP-64 device (vs XMC1402Q064X0200AAXUMA1)
- Accessible 64-pin LQFP assembly format (vs XMC1402Q064X0200AAXUMA1)
- Wide low-voltage operating range (vs XMC1402Q064X0200AAXUMA1)
설계 노트
Use the Infineon package pin-description table to confirm every port, supply, debug, analog, and alternate-function assignment before routing the PCB. The XMC1402F064X0200AAXUMA1 uses a 64-pin LQFP package, and several peripheral functions may be selectable through alternate-function registers. Preserve the exposed soldering perimeter, pin-1 orientation, and adequate clearance between the device and adjacent components. Placing the MCU near the power-entry and decoupling network can reduce return-loop length and improve supply behavior during switching transitions.
Design the supply network for the complete system, not only the nominal MCU rail. The MCU operating range is 1.8 V to 5.5 V, but peripheral loads, external pull-ups, communication transceivers, and I/O drive currents can create much larger peak demand. Follow the decoupling values and startup behavior specified in the manufacturer documentation, provide a stable local ground reference, and verify brownout, overshoot, and sequencing conditions with the worst-case load. Do not use the operating-voltage range as evidence that every attached device is safe at 5.5 V.
Do not treat the similarly named XMC1402Q064X0200AAXUMA1 as a drop-in replacement. The Q suffix version is listed in VQFN-64, whereas the target uses LQFP-64, so their land patterns, pad geometry, and assembly requirements differ. A replacement program also requires review of startup code, linker configuration, interrupt vectors, peripheral registers, clock setup, and any application-specific timing assumptions. The available XMC1302 pinout discussion concerns a different package and should not be applied directly to this LQFP design.
Route high-speed or sensitive signals according to the selected alternate functions and keep switching-node connections away from analog inputs and external clock circuitry. Maintain a continuous return path beneath signal routes where practical, avoid long stubs, and place termination or protection components near the relevant pins. For communication and sensor interfaces, confirm signal-integrity requirements from the connected device datasheets because the XMC1402 package exposes many multiplexed functions whose electrical characteristics may differ by pin.
Estimate the MCU's dissipation from the actual regulator and I/O loading rather than treating the 48 MHz clock as a direct thermal rating. Use the manufacturer electrical-characteristics data to calculate internal and I/O power at the selected voltage, duty cycle, and switching frequency. The LQFP package provides more exposed copper area than many small QFN options, but actual junction temperature still depends on the PCB copper, airflow, adjacent components, and the assembly environment. Validate the worst-case ambient and power conditions before establishing the final thermal margin.
규정 준수 정보
The manufacturer and channel listings identify the component as EU RoHS compliant. REACH, AEC-Q100 status, lead-free status, halogen-free status, and conflict-minerals status were not established.