Zilog

Z86C9116ASG - 8-Bit 16MHz ROMless Z8 MCU | Zilog

부품 번호: Z86C9116ASG ✓ 활성
5 V Vdss 44-LQFP (10 x 10 mm) Package 16 MHz Speed ROMless; external program memory required Memory
MOQ: 1 |

Z86C9116ASG 개요

Zilog Z86C9116ASG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz in a 44-LQFP package measuring 10 x 10 mm. It targets compact control systems that require external program memory, high-speed peripheral interfacing, and a general-purpose MCU architecture without integrated ROM. The device is identified as an MCU 8-Bit ROMless 44-LQFP (10x10) member of the Z86C91 family.

A ROMless microcontroller is a microprocessor-family device that fetches executable code from external memory instead of storing its application program in an internal ROM. Within the component hierarchy, this part is a microcontroller, a specialized single-chip computer, and a member of the semiconductor category. The Z8 architecture provides a compact instruction set and integrated peripherals for embedded control, while external program memory allows application code capacity to scale independently of the MCU.

The headline characteristics are an 8-bit CPU, a 16 MHz operating frequency, and ROMless operation in a 44-pin LQFP package. A 5 V supply is identified for this device. The 44-LQFP (10x10) package provides a substantially larger pin count than the small 8-pin and 14-pin MCU packages commonly used in simple control products, supporting a greater combination of I/O and peripheral connections while remaining suitable for space-constrained system-on-module designs.

The Z86C9116ASG is appropriate for industrial control modules, appliance controllers, embedded interface boards, and legacy Z8 systems that depend on external program storage. ROMless architecture is especially useful when firmware must be updated in the field, stored in a separate memory device, or shared across multiple controller variants. It is also useful when a designer wants to retain the flexibility of choosing external memory density and technology independently of the MCU.

Because this is a ROMless Z8 device, the system must include suitable external program and program-memory interface circuitry. Confirm the external memory device, address decoding, bus timing, and reset behavior against the manufacturer datasheet before layout. Because the package exposes 44 leads, pin multiplexing and the available port configuration must be reviewed for the intended design rather than inferred from an 8-pin MCU example.

For new designs, verify lifecycle status, firmware-tool support, and external-memory requirements with the manufacturer. For an existing Z8 product, preserve the original memory-device and bus arrangement where possible. This page consolidates package details, technical specifications, application guidance, comparison parameters, and engineering notes that support component selection and board-level planning.

드롭인 대체품: Z86C9116ASG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

Z86C9112ASG

✅ 드롭인 ⚠️ 사양 미검증
📦 44-LQFP (10 x 10 mm)
Clock rating remains 16 MHz; internal program and RAM resources differ and must be matched to the application

📋 참조 대체품 (카탈로그에 없음)

Z86C9114ASG

✅ 드롭인 ⚠️ 사양 미검증
📦 44-LQFP (10 x 10 mm)
Clock rating remains 16 MHz; internal memory size differs by family tier while the package format stays the same

📋 참조 대체품 (카탈로그에 없음)

Z86C9118ASG

✅ 드롭인 ⚠️ 사양 미검증
📦 44-LQFP (10 x 10 mm)
Clock rating remains 16 MHz; higher-tier internal memory resources differ from the Z86C9116ASG

📋 참조 대체품 (카탈로그에 없음)

Z86C9212ASG

✅ 드롭인 ⚠️ 사양 미검증
📦 44-LQFP (10 x 10 mm)
Retains the 16 MHz Z8 ROMless architecture and 44-LQFP footprint; peripheral configuration differs

📋 참조 대체품 (카탈로그에 없음)

Z86C9216ASG

✅ 드롭인 ⚠️ 사양 미검증
📦 44-LQFP (10 x 10 mm)
Retains the 16 MHz Z8 ROMless architecture and 44-LQFP footprint; internal resource allocation differs

📋 참조 대체품 (카탈로그에 없음)

Z86C9116ASG 최대 정격 & 전기적 특성

Microcontroller Type 8-bit ROMless microcontroller
Architecture Z8 CISC
최대 클록 주파수 16 MHz
Program Memory ROMless; external program memory required
공급 전압 5 V
패키지 44-LQFP (10 x 10 mm)
핀 수 44 pins
실장 유형 Surface mount
CPU Word Size 8 bits
Instruction Set CISC
Product Family Z86C91
Application Classification Embedded microcontroller
RoHS 상태 unknown
REACH Status unknown

Z86C9116ASG 44-lqfp (10 x 10 mm) 핀 구성 가이드

Z86C9116ASG(44-lqfp (10 x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

Z86C9116ASG의 44-lqfp (10 x 10 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: Z86C9116ASG.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

Z86C9116ASG 적합 용도: 6 애플리케이션s: Industrial Control Module, Appliance Controller, External-Program Embedded Interface, System-on-Module Controller, Instrument Control Panel, Legacy Z8 Product Maintenance.

🏭

Industrial Control Module

The Z86C9116ASG fits industrial control modules that require a compact 8-bit controller with external program storage. Its 16 MHz Z8 core provides useful processing headroom for sequencing, status monitoring, and communications routines, while the 44-LQFP (10 x 10 mm) package provides a practical pin count for port-based I/O. Because the MCU is ROMless, the system designer can select external program memory according to firmware growth, service policy, and update requirements rather than being limited by an internal ROM. Validate the external bus timing at 16 MHz and confirm industrial temperature, compliance, and qualification requirements with the manufacturer before production release.

🔧

Appliance Controller

The Z86C9116ASG can serve as the controller in an appliance where a dedicated microcontroller must coordinate motors, relays, sensors, and user inputs. The 8-bit Z8 architecture is appropriate for sequential control logic, while 16 MHz operation supports responsive task execution and periodic peripheral servicing. ROMless operation is valuable when product variants share a common MCU platform but require different program configurations in external memory. The 44-LQFP (10 x 10 mm) footprint is also suited to space-conscious control boards. Confirm that each motor, sensor, and safety-related signal has an available port and that the external program-memory interface meets the required access time.

🧩

External-Program Embedded Interface

The Z86C9116ASG is appropriate for an embedded interface board that stores executable code in a separate programmable memory device. This ROMless arrangement simplifies field upgrades and allows firmware capacity to be scaled without changing the controller package. At 16 MHz, the Z8 core can service protocol handling, button logic, and status reporting, but the external memory must meet the controller's access timing at the intended clock rate. Use the manufacturer pin-description table to assign address, data, and control nets, and keep the memory bus layout stable so that later capacity or technology substitutions remain practical.

📱

System-on-Module Controller

The Z86C9116ASG suits a system-on-module design where the module combines a Z86C91 controller, external program memory, and support circuitry in a compact assembly. The 44-LQFP (10 x 10 mm) package provides more connection options than a minimal 8-pin MCU without requiring a large board area, and the 16 MHz clock supports typical embedded supervisory tasks. Because program storage is external, the memory device and interface remain important module-level BOM decisions. Confirm board outline, component spacing, thermal conditions, and the exact external-memory topology with the module designer before the footprint is released for manufacturing.

📺

Instrument Control Panel

The Z86C9116ASG can control a compact instrument panel that scans switches, drives displays, updates indicators, and coordinates measurement peripherals. The 8-bit Z8 core handles menu logic and state machines efficiently, and the 16 MHz operating rate gives adequate timing margin for regular polling and display updates. The 44-pin package offers a practical balance between I/O availability and board area, while ROMless operation permits shared code storage across related instrument configurations. Prioritize debounce timing, display update latency, and external-memory access margins in firmware, and verify that unused pins are configured safely at reset.

🛠️

Legacy Z8 Product Maintenance

The Z86C9116ASG is a practical selection for maintaining an established Z8-based product when the original controller uses external program memory and a 44-LQFP footprint. Preserving the Zilog Z8 architecture minimizes changes to the tool chain, boot sequence, and peripheral drivers, while the ROMless configuration retains the field-update flexibility of the original design. Before substituting it into a legacy assembly, compare every connected pin, reset circuit, clock source, port direction, interrupt vector, and external-memory connection. The main value of this approach is reduced redesign risk rather than a different technical specification set.

What is the Z86C9116ASG?
The Z86C9116ASG is an 8-bit ROMless Z8 microcontroller from Zilog. According to the Zilog Z86C91 family documentation, it operates at 16 MHz and is packaged in a 44-LQFP measuring 10 x 10 mm. Its ROMless architecture means application code must be stored in external program memory, giving the system designer freedom to choose memory density and update firmware independently of the MCU.
What are the key specifications of Z86C9116ASG?
The key Z86C9116ASG specifications are an 8-bit Z8 CISC core, a 16 MHz maximum operating frequency, ROMless operation, and a 44-LQFP (10 x 10 mm) surface-mount package. The device is also identified as operating from a 5 V supply. The manufacturer family documentation is the authoritative reference for pin multiplexing, external memory timing, RAM, and peripheral assignments.
Where to download the Z86C9116ASG datasheet PDF?
The Z86C9116ASG datasheet PDF can be downloaded from the Zilog Z86C91 CMOS Z8 ROMLess Microcontrollers document at https://zilog.com/docs/z8/ps0185.pdf. Use the pin-description table and external-memory interface sections when assigning PCB nets. Distributor listings for this exact MPN are also available, but the manufacturer document should govern electrical limits and timing.
Where can I find the Z86C9116ASG pinout?
Use the pin-description table in the Zilog Z86C91 ROMLess Microcontrollers datasheet for the authoritative Z86C9116ASG pinout. The device uses a 44-LQFP package, but functions such as program-data bus signals, port assignments, control inputs, and clock connections must be taken from the exact variant section. Confirm package drawing dimensions against the mechanical information in the same document.
Does the Z86C9116ASG require external program memory?
Yes, the Z86C9116ASG is a ROMless device and requires an external program-memory connection for executable code. This architecture separates code storage from the MCU, allowing the system designer to select a larger or smaller memory device and to update firmware through the external memory interface. Check address width, access timing, and any required wait states against the manufacturer documentation before schematic capture.
What clock speed does the Z86C9116ASG use?
The Z86C9116ASG operates at up to 16 MHz. This operating frequency supports faster instruction execution and peripheral service rates than the lower-clock members of the Z8 family. Because the part is ROMless, the external program-memory access time must remain valid at the intended operating frequency, so memory and bus timing should be reviewed together rather than optimized independently.
What package does the Z86C9116ASG use?
The Z86C9116ASG is offered in a 44-LQFP package measuring 10 x 10 mm. The 44-lead surface-mount package provides more external connections than the smallest 8-pin MCUs, which supports parallel peripheral and external-memory connections. Use the package drawing in the Zilog datasheet for land patterns, lead pitch, exposed-pad information if applicable, and soldering details.
Z86C9116ASG vs Z86C9112ASG - which is better for an embedded control design?
Both parts belong to the Zilog Z86C91 ROMless family and share the 16 MHz clock and 44-LQFP format, but their internal memory resources and peripheral configurations must be compared from the manufacturer documentation. Choose the variant whose program-memory and RAM requirements match the application, then confirm that every connected external signal has the same function and pin location on the new device.
When should I choose Z86C9116ASG over another Z8 ROMless controller?
Choose the Z86C9116ASG when a design needs a 16 MHz Z8 core, external program storage, and the 44-LQFP (10 x 10 mm) footprint shown by the manufacturer. It is a strong fit for established Z8 architectures, industrial control modules, and space-constrained system-on-module designs. Select another family member only when its memory capacity, I/O count, or timer resources better satisfy the application.
Is the Z86C9116ASG suitable for a system-on-module design?
Yes, the Z86C9116ASG is suitable for many system-on-module designs that already support external program memory and Z8 firmware. Its 16 MHz operating speed and 44-LQFP (10 x 10 mm) package fit compact embedded control assemblies. Confirm the module pinout, external memory arrangement, supply distribution, and exposed-component clearance against the mechanical drawings before committing the layout.
What can replace the Z86C9116ASG?
A true drop-in replacement must match the 44-LQFP footprint, pin functions, 16 MHz operating behavior, external program-memory interface, and critical peripheral resources. Same-family Z86C91 variants are the closest candidates because they share the architecture and package format, but memory capacity and pin multiplexing still require verification. A substitute should be qualified with the actual firmware rather than accepted on package appearance alone.
Is there a Zilog drop-in replacement for the Z86C9116ASG?
Zilog Z86C91 family variants with the same 44-LQFP package are the most credible drop-in candidates for the Z86C9116ASG because they retain the same Z8 architecture, 16 MHz clock class, and external-memory approach. Verify pin functions, memory resources, reset behavior, and peripheral assignments for the selected variant. A second-source replacement from another manufacturer is not established by the available cross-reference information.
What is the best equivalent for Z86C9116ASG in a legacy Z8 product?
The best equivalent is the Z86C91 family member that preserves the Z86C9116ASG footprint, 16 MHz timing, external program-memory interface, and all connected peripheral functions. In a legacy product, retaining the Zilog Z8 instruction set also minimizes firmware and tool-chain disruption. Validate the memory map, port usage, and interrupt sources before releasing the substitution into production.
Where to buy Z86C9116ASG online?
The Z86C9116ASG can be ordered through authorized electronic-component distribution channels or directly from the manufacturer, subject to availability. Use the Request a Quote form on this page to request current commercial terms, minimum order quantity, and lead time for the exact 44-LQFP ordering code. Provide the target quantity and required date so the request can be processed without changing the package variant.
What is the price of Z86C9116ASG?
Pricing for the Z86C9116ASG depends on quantity, inventory position, and current market conditions, so use the Request a Quote form on this page for a current quotation of the exact MPN. The form supports volume breaks and delivery requirements without embedding a static price that could become outdated. Confirm that the quotation identifies the 44-LQFP (10 x 10 mm) ordering variant.
What is the lead time and stock status of Z86C9116ASG?
Current lead time and stock status should be confirmed through the Request a Quote form on this page, which can return a supply commitment for the requested quantity. Because ROMless microcontroller availability can vary with program-memory sourcing and long-tail lifecycle management, request the delivery schedule at the system-build quantity. Include any required date and approved-source list with the request.
Is Z86C9116ASG RoHS compliant and suitable for automotive designs?
The Z86C9116ASG is an industrial Z86C91 ROMless microcontroller, and the available manufacturer and distributor information does not establish RoHS, REACH, or AEC-Q100 qualification for this exact ordering code. Obtain the current compliance and qualification documentation from Zilog before releasing the device into regulated or automotive production. Do not infer automotive qualification from the package or clock rating.

엔지니어링 참조 데이터: Z86C9116ASG — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the Z86C9116ASG when maintaining or designing a compact 8-bit Z8 system that requires a 16 MHz operating rate, external program memory, and the 44-LQFP (10 x 10 mm) package. It is particularly suitable for legacy Z8 industrial, appliance, and interface products where preserving the tool chain and external-memory bus reduces redesign risk. The Z86C9112ASG and Z86C9114ASG are same-family choices when their internal memory resources better fit the firmware, while Z86C9118ASG suits applications requiring a higher resource tier. Use a Z86C92 variant only when its additional peripheral configuration is needed and every footprint-compatible connection is verified. No cross-brand drop-in equivalent is established here because ROMless memory interfaces, pin multiplexing, and legacy firmware dependencies can defeat an apparently compatible alternative.

대체품과의 비교

파라미터 이 제품 Z86C9112ASG Z86C9114ASG Z86C9118ASG Z86C9212ASG Z86C9216ASG
Brand Zilog Zilog Zilog Zilog Zilog Zilog
Package 44-LQFP (10 x 10 mm) 44-LQFP (10 x 10 mm) 44-LQFP (10 x 10 mm) 44-LQFP (10 x 10 mm) 44-LQFP (10 x 10 mm) 44-LQFP (10 x 10 mm)
CPU Architecture 8-bit Z8 CISC 8-bit Z8 CISC 8-bit Z8 CISC 8-bit Z8 CISC 8-bit Z8 CISC 8-bit Z8 CISC
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz
Program Memory Architecture ROMless; external memory required ROMless; external memory required ROMless; external memory required ROMless; external memory required ROMless; external memory required ROMless; external memory required
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
I/O and Peripheral Resources Z86C91 8-bit MCU resources Family-level resources; verify exact variant Family-level resources; verify exact variant Family-level resources; verify exact variant Z86C92 peripheral configuration Z86C92 peripheral configuration

주요 차별점

  • ROMless design separates firmware storage from the MCU (vs Z86C9216ASG)
  • Established Z86C91 family resource organization (vs Z86C9212ASG)
  • Direct family migration path for legacy Z8 designs (vs Z86C9112ASG)

설계 노트

The external program-memory interface and the Z86C9116ASG must be evaluated together as a power subsystem. A 16 MHz operating rate increases the number of memory transactions per unit of time, which can raise dynamic current in both the controller and the external memory device. Provide local high-frequency bypass capacitance at each supply pin, route return current through the same ground reference, and follow the values and layout recommendations in the manufacturer datasheet rather than using generic bulk-capacitor rules.

Keep the external program-memory bus as short as practical and place the memory device near the controller pins that carry address, data, and control signals. The 44-LQFP (10 x 10 mm) footprint has a high pin density, so route the bus in a defined layer region and avoid splitting it between distant logic layers. Confirm the exact land pattern, lead pitch, and exposed-pad treatment from the package drawing before releasing artwork.

External program-memory access timing must remain valid at the intended 16 MHz clock. Review address setup, chip-select, data-valid, and hold timing for the selected memory device, and account for board propagation delay on longer routes. If the existing Z8 design changes memory technology or expands firmware capacity, repeat the timing analysis rather than assuming the original access cycle remains sufficient.

Do not treat any 44-LQFP Z86C91 device as interchangeable solely because the drawing size matches. Verify reset behavior, port multiplexing, interrupt sources, timer channels, memory-map requirements, and the active-low or active-high convention of every connected control signal. For a replacement, compare the old and new pin-description tables side by side and test the complete firmware on the new external-memory configuration before production release.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer family documentation and distributor information do not establish exact-MPN RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification status. Obtain current compliance documentation from Zilog before production release.

데이터 검증일: 2026-11-11 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

Z86C9116ASG datasheet Z86C9116ASG datasheet pdf Z86C9116ASG pinout Z86C9116ASG specifications Z86C9116ASG price Z86C9116ASG stock Z86C9116ASG equivalent Z86C9116ASG replacement Z86C9116ASG vs Z86C9112ASG Z86C9116 44-LQFP pinout Zilog Z86C9116ASG Z86C9116 16MHz ROMless MCU Z86C9116 external program memory

관련 부품 & 용어

Zilog Z86C9116ASG Z86C9112ASG Z86C9114ASG Z86C9118ASG Z86C9212ASG Z86C9216ASG Z8 architecture microcontroller 8-bit microcontroller ROMless microcontroller CISC external program memory 16 MHz 5 V 44-LQFP LQFP package family surface mount SMD system on module industrial control appliance controller external memory bus Z86C91
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기