Z86C9325PSC - 25MHz 8-Bit ROMless MCU | Zilog
부품 번호: Z86C9325PSC ✓ 활성Z86C9325PSC 개요
An 8-bit microcontroller is a microprocessor and embedded-control IC designed around a central processing unit, memory interfaces, timers, interrupt logic, and digital I/O. The Z8 family belongs to the broader semiconductor hierarchy of embedded processors, microcontrollers, and programmable control devices. Because Z86C9325PSC is ROMless, firmware must be stored in external memory and loaded or accessed by the processor during operation. This architecture provides more flexibility than mask-programmed or one-time-programmable variants when code revisions and field updates are important.
The principal device characteristics include a maximum clock frequency of 25 MHz, 8-bit processing, ROMless operation, and a 2.97 V to 5.5 V operating supply range. The Z86C9325PSC also provides the Z8 C93 controller feature set, including capture-register and fast-decrement capabilities described for this device family. Its 40-pin package exposes more signal paths than small 8-pin or 20-pin controllers, making it suitable for systems that need several inputs and outputs without adding a separate peripheral controller.
The DIP package measures 0.620 inch, or 15.75 mm, across the pin row width according to the listed product information. It is a through-hole package rather than a surface-mount component, which simplifies breadboard and prototype construction but occupies more PCB area than a leadless or fine-pitch package. Because the processor has no internal program ROM, the board design must include a suitable external program-memory device and a defined memory interface. Designers should consult the pin-description and electrical tables in the manufacturer datasheet before assigning signals or laying out the external memory bus.
Typical applications include industrial keypad and menu controllers, motor and stepper-control systems, instrumentation front panels, printer and scanner controllers, and general embedded automation equipment. The 25 MHz operating rate supports time-sensitive control tasks, while the broad I/O count can reduce the need for external interface expanders. Because the MCU is ROMless, it is particularly appropriate for products whose firmware must change during development or may require field revisions through an external programming arrangement.
When creating a PCB, reserve a 40-pin DIP footprint, preserve the required external-memory connections, and route the clock and reset circuitry according to the manufacturer’s recommended schematic. A ROMless controller also requires attention to boot and memory-access timing. Because no public pin-description table is included in the available product records, use the manufacturer datasheet’s pin table to confirm signal names, supply pins, ground pins, and programming interface assignments before fabrication.
This product page consolidates the exact device identity, supply range, package information, programming considerations, and verified same-family alternatives with practical selection guidance. It also distinguishes genuine drop-in options from differently packaged Z86C9325 variants, helping engineers assess PCB reuse, firmware constraints, external-memory requirements, and sourcing availability before committing to a design.
드롭인 대체품: Z86C9325PSC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: Z86C9325PSC (동일 폼 팩터 및 풋프린트) — 차이점: Data Bus Width, Mounting Type.
Z86C9325PSG
✅ 드롭인가격 문의
데이터시트 보기 →Z86C9325PSC 최대 정격 & 전기적 특성
| Microcontroller Type | 8-bit ROMless microcontroller |
| 최대 클록 주파수 | 25 MHz |
| 동작 공급 전압 | 2.97 V to 5.5 V |
| Processor Family | Z8 Z8 C93 |
| Program Memory | External ROM required |
| Package Type | 40-pin PDIP |
| 실장 유형 | Through hole |
| Lead Spacing | 0.620 inch (15.75 mm) |
| 핀 수 | 40 pins |
| 데이터 버스 폭 | 8 bits |
Z86C9325PSC 40-pin pdip 핀 구성 가이드
Z86C9325PSC(40-pin pdip 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: Z86C9325PSC.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
Z86C9325PSC 적합 용도: 6 애플리케이션s: Industrial Keypad and Panel Controller, Motor and Stepper Control, Instrumentation and Measurement Front End, Printer and Scanner Control, External-Memory-Based Embedded Products, Power Supply and System Sequencer.
Industrial Keypad and Panel Controller
The Z86C9325PSC fits keypad, selector, and front-panel control systems that need more I/O than a compact 8-pin MCU but do not require a large surface-mount footprint. Its 25 MHz 8-bit Z8 C93 core can manage debouncing, menu logic, status indication, and communication tasks while operating from the specified 2.97 V to 5.5 V range. The 40-pin PDIP package makes signal assignment straightforward for prototypes and through-hole assemblies. Because the controller is ROMless, the product can also use replaceable or externally programmed memory where firmware revisions are expected. Use the manufacturer pin table to place keypad rows, display-control signals, and external memory interfaces, and confirm the controller’s timing and I/O ratings against the final panel design.
추천
Motor and Stepper Control
The Z86C9325PSC is suitable for small motor-control and sequencing subsystems where a deterministic 8-bit controller, external program memory, and 40 available package positions simplify integration. The 25 MHz clock provides a practical basis for coordinating pulse timing, direction control, limit inputs, and supervisory logic. Its 2.97 V to 5.5 V operating range also allows use in mixed 3.3 V and 5 V industrial systems when individual rail tolerances are checked. A ROMless architecture is useful when several product variants share one controller design but require different external code images. Keep motor-current switching stages separate from sensitive controller traces, use the manufacturer timing information to define pulse-width requirements, and validate that each external memory signal has adequate layout margin.
추천
Instrumentation and Measurement Front End
The Z86C9325PSC can serve as the supervisory controller for instrumentation front panels that combine switches, displays, status lamps, and a communications interface. Its 25 MHz 8-bit processing core provides useful control bandwidth for user-interface updates and data handling, while the 40-pin PDIP footprint offers more external connections than most small-package 8-bit MCUs. The ROMless configuration allows firmware to remain in external memory, which is useful for configurable test equipment or products requiring updateable code. The device should normally be paired with dedicated analog front-end circuitry rather than used as a high-precision converter. Keep sensitive measurement paths physically separated from processor clock and switching signals, and verify the recommended external components and interface timing in the manufacturer documentation.
추천
Printer and Scanner Control
The Z86C9325PSC is applicable to legacy-style printer, scanner, and peripheral controllers that coordinate sensors, motors, indicators, and host communication. The 25 MHz Z8 core provides enough clock rate for sequential control logic, while external program memory allows firmware capacity to scale independently of the MCU package. The 40-pin PDIP package is particularly convenient for systems assembled with through-hole sockets or prototypes, although new high-volume products may favor a smaller surface-mount controller. Design the external-memory bus to minimize capacitance and maintain signal integrity, and place termination or pull-up components only where required by the manufacturer’s interface diagrams. Validate startup behavior, bus timing, and I/O direction assignments before releasing the PCB.
추천
External-Memory-Based Embedded Products
The Z86C9325PSC is a natural choice when a product requires ROMless operation, a replaceable external code device, or multiple firmware configurations served from the same controller hardware. Its 25 MHz 8-bit Z8 architecture separates execution from program storage, allowing memory capacity and update strategy to be selected at board level. The 40-pin PDIP package provides enough pins for an external memory device and multiple peripheral signals without an expensive fine-pitch package. In production, programmers must ensure that code loading and checksum procedures are defined by the product manufacturer. The PCB should include a stable supply path, deliberate clock and reset routing, and accessible programming or firmware-loading connections. Confirm all external-memory pin assignments against the official Zilog documentation.
추천
Power Supply and System Sequencer
The Z86C9325PSC can supervise power-supply sequencing, fault reporting, and status control in larger industrial systems where its 40-pin footprint provides numerous discrete signal paths. The 2.97 V to 5.5 V supply range suits controller rails commonly found in mixed-voltage equipment, while the 25 MHz core supports deterministic supervisory tasks and communication handling. The ROMless architecture permits revisionable control firmware for programmable power systems. The MCU should not switch high-current rails directly; use it to control suitable gate drivers, relays, or digital potentiometers, while keeping high-voltage and high-current paths away from the controller area. Confirm the exact enable, fault, and communication pin assignments in the datasheet, and provide stable local bypassing at the package supply pins.
추천
추천 제품 요약
엔지니어링 참조 데이터: Z86C9325PSC — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | Z86C9325PSG |
|---|---|---|
| Brand | Zilog | Zilog |
| Package | 40-pin PDIP | 40-pin PDIP - verify package drawing before substitution |
| Processor Architecture | 8-bit Z8 | 8-bit Z8 |
| Maximum Clock Frequency | 25 MHz | 25 MHz |
| Program Memory | External ROM required | ROMless |
| Controller Family | Z8 C93 | Z8 C93 |
| Mounting Type | Through hole | Through hole |
주요 차별점
- ROMless architecture permits externally selected or updateable program memory (vs Z86C9325PSG)
- Confirmed 25 MHz maximum operating frequency (vs Z86C9325PSG)
- Broad 2.97 V to 5.5 V operating range (vs Z86C9325PSG)
설계 노트
Use the manufacturer’s 40-pin PDIP footprint and preserve the package orientation marker. Because this controller is ROMless, confirm every address, data, and control connection against the official pin table before routing the external memory bus. Place the external program-memory device and its decoupling capacitors close to the associated controller pins, and avoid routing high-current or switching-node traces beneath the memory area.
Keep the processor clock path short, place its recommended support components close to the relevant pins, and avoid routing it alongside motor-switching or display signals. External memory timing is sensitive to trace capacitance and loading, so follow the manufacturer’s recommended connection and termination arrangements. For a first prototype, the 40-pin through-hole package provides accessible nodes for debugging clock, reset, and memory-bus behavior.
Do not assume that every Z86C9325 suffix is mechanically interchangeable: the family is offered in multiple package options, including PDIP, PLCC, QFP, and VQFP forms. Confirm the complete MPN and compare package drawings and pin tables before substituting a part. Also do not design for internal program ROM; the Z86C9325PSC requires external program storage, so the memory device and firmware-loading process must be part of the system design.
규정 준수 정보
The available product records identify the device and package but do not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements. AEC-Q100 is not applicable to this legacy through-hole microcontroller classification.