Produk (44,000+)

TLV2450CD - 23µA, 220kHz Rail-to-Rail Op Amp | Texas Instruments
TLV2450CD

TLV2450CD - 23µA, 220kHz Rail-to-Rail Op Amp | Texas Instruments

Texas Instruments TLV2450CD is a single-channel, rail-to-rail input and output operational amplifier with shutdown support, offering 23 µA supply current per channel, 220 kHz gain-bandwidth product, and ±10 mA output drive capability. The device is packaged in an 8-pin SOIC and is suited to portable instrumentation, sensor interfaces, low-power signal conditioning, and battery-powered systems. An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the difference between two input voltages. The TLV2450 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its rail-to-rail input stage accepts signals extending toward the supply rails, while its rail-to-rail output stage provides useful output swing close to those limits. This combination makes it practical for low-voltage systems where the usable signal range is a substantial fraction of the available supply voltage. The TLV2450CD combines low quiescent current with a comparatively wide 220 kHz gain-bandwidth product. Its typical input offset voltage is 20 µV, supporting accurate amplification of small sensor and bridge signals. Shutdown capability provides a path to reduce consumption when the circuit is inactive, which is useful in battery-operated acquisition systems. The 23 µA-per-channel supply current is particularly valuable when every microamp contributes to overall system energy use. The device operates as a general-purpose single amplifier and can be configured for noninverting, inverting, summing, differential, filtering, and current-feedback applications. With a 220 kHz gain-bandwidth product, moderate closed-loop gains are practical in low-power signal paths. Designers must still account for noise gain, output-voltage headroom, capacitive-load stability, input common-mode range, and the effect of the selected external feedback network on accuracy and bandwidth. Typical uses include portable sensor conditioning, low-frequency active filters, microphone preamplification stages, industrial measurement interfaces, and low-leakage battery-powered circuits. The shutdown pin is useful in duty-cycled systems that retain a measurement function while requiring lower consumption between measurements. A key design consideration is to keep feedback-loop routing short and provide stable reference and bypass connections. Decoupling capacitors should be placed close to the supply pins, while sensitive input and feedback nodes should remain away from switching nodes and high-current paths. Because the operating current and bandwidth are modest, the TLV2450CD is most appropriate where low power and rail-to-rail signal access matter more than high speed or heavy capacitive-load drive. This product page combines the manufacturer-defined operating characteristics with practical application guidance, package details, pin-compatible alternatives, and engineering considerations for portable and low-power analog systems.

RFC Hubungi kami
TLV2450CP - 6V 220kHz Low-Power RRIO Op Amp | Texas Instruments
TLV2450CP

TLV2450CP - 6V 220kHz Low-Power RRIO Op Amp | Texas Instruments

Texas Instruments TLV2450CP is a single operational amplifier with rail-to-rail input and output capability, a 6 V maximum supply voltage, 220 kHz gain-bandwidth product, and 23 uA typical quiescent current. The device is offered in an 8-pin PDIP package and includes shutdown functionality, making it suitable for low-voltage instrumentation, sensor signal chains, and portable systems where power efficiency and input flexibility are important. An operational amplifier, or op amp, is a high-gain analog building block used to amplify small voltage signals, buffer inputs, compare voltages, and drive analog-to-digital converter inputs. The TLV2450 belongs to the rail-to-rail input/output operational-amplifier family, where rail-to-rail input operation improves access to the supply-voltage range and rail-to-rail output operation increases output-voltage swing. Its low quiescent current reduces the supply demand of battery-powered and always-on circuits. The main advantages are 220 kHz gain-bandwidth product, approximately 23 uA typical quiescent current, and operation from a single 6 V supply or a 2.7 V to 6 V supply range. The rail-to-rail input stage accepts signals near either supply rail, while the rail-to-rail output stage supports low-voltage signal conditioning with limited headroom. A shutdown function provides a way to reduce operating demand when the amplifier is not needed. These characteristics suit compact, low-power signal-processing systems without requiring a high-speed amplifier. The TLV2450 is a general-purpose amplifier rather than a precision or high-current output device. Its 10 mA per channel output-current capability and 220 kHz bandwidth are appropriate for sensors, filters, and low-frequency analog stages, but not for demanding load driving, very wide-band instrumentation, or high-accuracy measurement rails. Designers should verify input and output common-mode limits, capacitive-load stability, shutdown behavior, and output-current requirements against the manufacturer datasheet before committing a design. Typical uses include battery-powered sensor interfaces, portable measurement equipment, low-voltage audio and control circuits, analog signal conditioning, and embedded analog front ends. The 8-pin PDIP package favors through-hole prototyping, educational instruments, and applications where a socketed or easily inspectable amplifier is useful. The single-amplifier configuration also keeps board requirements simple when only one analog channel is required. A primary design consideration is supply bypassing. Place a suitable local capacitor at the power pin and keep return-current paths short to reduce supply ripple and instability. Avoid driving long capacitive loads directly without checking the recommended output-capacitance limits. If shutdown is used, define its logic levels and state transitions carefully so the amplifier cannot oscillate between operating and shutdown modes. This page combines the manufacturer's device characteristics, package information, practical application guidance, verified source links, and an explicit treatment of replacement constraints. The TLV2450CP is best selected when low quiescent current, rail-to-rail signal access, shutdown capability, and an 8-pin PDIP footprint are more important than precision, high-current output, or very high bandwidth.

RFC Hubungi kami
TLV2450ID - 23µA, 220kHz RRIO Op Amp | Texas Instruments
TLV2450ID

TLV2450ID - 23µA, 220kHz RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2450ID is a single, low-power rail-to-rail input/output operational amplifier with a 220 kHz gain-bandwidth product, 23 µA supply current per channel, and a maximum supply voltage of 6 V. The device is offered in an 8-pin SOIC package and includes a shutdown function for reducing power consumption when the amplifier is not needed. An operational amplifier is a voltage-gain circuit used to amplify small signals in instrumentation, control, sensor, and analog signal-processing systems. The TLV2450ID belongs to the operational-amplifier hierarchy, where rail-to-rail input and output capability allows the signal to approach the supply rails. This is particularly useful in battery-powered equipment operating from low-voltage supplies, where usable input and output range is limited. The TLV2450ID combines 220 kHz gain-bandwidth product with 23 µA typical quiescent current. Its rail-to-rail input stage accepts signals near either supply rail, while the rail-to-rail output stage can drive loads toward the output limits. The manufacturer also specifies 20 µV typical input offset voltage and ±10 mA output-drive capability. A shutdown pin provides a direct way to control active power consumption in portable and intermittently operated systems. The TLV2450 is designed as a general-purpose amplifier for low-voltage analog systems. Its 220 kHz bandwidth supports moderate-frequency signal paths without requiring a higher-speed amplifier. Typical operating current of 23 µA is especially valuable in sensor nodes, portable instruments, and monitoring systems where amplifier power can dominate standby energy. The shutdown function can further reduce consumption when acquisition is intermittent. Typical applications include low-power sensor conditioning, portable measurement equipment, industrial monitoring, current-loop receivers, and buffered analog signal paths. In these systems, the amplifier can process transducer outputs close to ground or the positive rail while operating from a low-voltage supply. Care should be taken to preserve output swing margin and stable operation under the intended load and feedback configuration. For PCB design, place input and feedback components close to the amplifier pins, route sensitive input traces away from switching nodes, and use a stable feedback network appropriate for the required gain and bandwidth. Verify output drive, capacitive-load behavior, and shutdown logic against the circuit timing before releasing the design. This page combines the TLV2450ID operating characteristics with package guidance, application-focused design advice, and same-footprint alternatives for engineers evaluating a low-power rail-to-rail operational-amplifier design.

RFC Hubungi kami
TLV2450IP - 6V, 220kHz, 23µA RRIO Op Amp | Texas Instruments
TLV2450IP

TLV2450IP - 6V, 220kHz, 23µA RRIO Op Amp | Texas Instruments

Texas Instruments TLV2450IP is a single, general-purpose operational amplifier with rail-to-rail input and output, 23 µA typical quiescent current, 220 kHz gain-bandwidth product, and a 6 V maximum supply in an 8-pin PDIP package. The low-current design supports portable and low-power signal-conditioning systems, while the 220 kHz bandwidth provides useful speed for sensor, filtering, and instrumentation applications. An operational amplifier is a voltage-feedback amplifier used to amplify differential signals, buffer analog nodes, or perform basic analog functions through external feedback networks. The TLV2450 belongs to the operational-amplifier hierarchy, where it combines rail-to-rail input and output capability with low quiescent current. Its power-management characteristics make it suitable for battery-operated equipment where every microamp of supply demand affects available operating time. The principal features of the TLV2450IP include a 23 µA typical supply current per channel, 220 kHz gain-bandwidth product, rail-to-rail input and output operation, and operation from a single supply up to 6 V. The manufacturer describes the device as a single 6 V, 220 kHz, low-quiescent-current RRIO operational amplifier with shutdown capability. Shutdown support is useful when a battery-powered system needs to reduce current consumption while the amplifier is not actively processing a signal. The family operates from a single positive supply, which simplifies circuits that cannot use negative rails. Rail-to-rail input operation allows sensing signals near either supply rail, while rail-to-rail output improves output-voltage range and can reduce the need for additional output-stage headroom. The 220 kHz gain-bandwidth product makes the amplifier appropriate for moderate-speed closed-loop stages rather than high-speed signal-path applications requiring substantially greater bandwidth. Typical uses include portable sensor interfaces, low-current data-acquisition front ends, battery-powered monitoring, analog filtering, buffer stages, and embedded instrumentation. In a sensor circuit, the amplifier can amplify a small differential signal while keeping system current consumption low. For filter and gain-stage designs, external resistors and capacitors determine the achievable response, subject to the amplifier's gain-bandwidth and stability characteristics. Designers should account for shutdown logic, input common-mode range, output swing, bias current, noise, and stability when assigning feedback components. Place the device close to the feedback network and maintain a stable reference connection to minimize parasitic effects. Confirm the complete electrical limits and pin configuration in the manufacturer datasheet before using the device in a new design. This product page consolidates the verified manufacturer characteristics, package information, sourcing workflow, drop-in comparison, and practical application guidance. It supports faster component selection by separating the TLV2450IP's low-power RRIO features from the design constraints that matter in portable and instrumentation systems.

RFC Hubungi kami
TLV2451CD - 6V, 220kHz, 23uA RRIO Op Amp | Texas Instruments
TLV2451CD

TLV2451CD - 6V, 220kHz, 23uA RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2451CD is a single, 6 V, rail-to-rail input and output operational amplifier with a 220 kHz gain-bandwidth product and 23 uA quiescent current, housed in an 8-pin SOIC package. Its combination of low supply current and moderate bandwidth targets compact, low-power analog systems that require input and output swing close to the supply rails. The TLV2451CD is intended for portable instrumentation, low-voltage sensor interfaces, and signal-conditioning circuits where a conventional rail-to-rail amplifier may consume excessive power. An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify differences between signals applied to its inverting and non-inverting inputs. A rail-to-rail input stage accepts input voltages extending toward the positive and negative supply rails, while a rail-to-rail output stage can produce output voltages close to those rails. Within the broader semiconductor hierarchy, the TLV2451CD belongs to the amplifier IC family and the operational-amplifier subcategory, providing analog signal conditioning ahead of measurement, control, or data-conversion stages. The principal operating characteristics are a 6 V maximum supply, 220 kHz gain-bandwidth product, and 23 uA quiescent current. Rail-to-rail input and output capability provides useful signal-range flexibility in low-voltage circuits. These features make the device appropriate for battery-powered sensor nodes, industrial measurement interfaces, and low-voltage control systems. Its 220 kHz bandwidth supports general-purpose amplification rather than demanding high-speed video or precision signal-chain applications. The TLV2451 is part of a broader low-power operational-amplifier family, and the TLV2451CD configuration provides one amplifier per 8-pin SOIC package. Compared with a higher-bandwidth amplifier, the TLV2451CD emphasizes lower power consumption while retaining enough bandwidth for many slow analog signals. Compared with a conventional non-rail-to-rail amplifier, its input and output stages offer greater usable range on low-voltage supplies. Designers should still verify gain stability, capacitive loading, output swing, and noise requirements for the intended feedback network and signal source. Typical uses include bridge or thermistor sensor conditioning, current-loop signal processing, low-voltage data-acquisition front ends, portable measurement instruments, and embedded control systems powered from small batteries or low-current rails. In a sensor interface, the amplifier can convert small differential signals into a voltage suitable for an ADC or controller input. In a portable instrument, the 23 uA quiescent current helps limit continuous power demand when the signal bandwidth remains below the device's 220 kHz capability. A practical design consideration is to check the feedback network against the required closed-loop gain and signal bandwidth, and to place the device close to its decoupling and feedback components. The power-supply pins must be bypassed as directed by the manufacturer datasheet, and input common-mode and output swing limits must be checked at the actual supply voltage and load. These checks are especially important when signals approach either supply rail. This product page combines the manufacturer device description, exact-MPN distributor references, package information, drop-in alternatives, application guidance, and design checks to support faster engineering evaluation. It also distinguishes documented TLV2451CD characteristics from parameters that require confirmation against the current manufacturer datasheet before production release.

RFC Hubungi kami
TLV2451ID - 6V 220kHz Low-Power RRIO Op Amp | Texas Instruments
TLV2451ID

TLV2451ID - 6V 220kHz Low-Power RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2451ID is a single-amplifier, 6 V, low-power operational amplifier featuring rail-to-rail input and output operation, a 220 kHz gain-bandwidth product, and a low quiescent current of 23 µA. The device is offered in an 8-pin SOIC package for general-purpose analog signal conditioning. An operational amplifier is a voltage-controlled differential amplifier used to amplify, buffer, filter, or compare analog signals. The TLV2451 belongs to the rail-to-rail input/output operational-amplifier family and sits within the broader hierarchy of linear amplifiers, analog amplifiers, and semiconductor signal-conditioning devices. Rail-to-rail input capability supports signal operation near the supply rails, while rail-to-rail output capability helps preserve output swing in low-voltage systems. The principal features of the TLV2451 are its 6 V supply rating, 23 µA quiescent current, and 220 kHz gain-bandwidth product. The low quiescent current makes the amplifier suitable for systems where supply efficiency and standby consumption are important. Its 220 kHz gain-bandwidth product provides useful bandwidth for low-frequency signal conditioning, instrumentation, filtering, and general analog control tasks. The low-power operating characteristics make the device particularly relevant to portable and energy-conscious designs. The TLV2451ID combines low supply current with rail-to-rail input and output behavior in one amplifier channel. This combination allows a circuit to handle signals close to the available supply-voltage range without adding a second amplifier for buffering. Because the device is packaged in an 8-pin SOIC, it supports conventional surface-mount assembly and PCB routing at a higher pin count than the smaller SOT-23 and MSOP package options associated with other members of the TLV245x family. Typical applications include low-power sensor conditioning, portable measurement systems, analog filtering, voltage buffering, threshold comparison, and low-energy industrial or embedded interfaces. In a sensor front end, the amplifier can provide gain while operating at low quiescent current. In a filter or buffer, its 220 kHz gain-bandwidth product is useful for signals that do not require high-speed operation. Designers should evaluate the complete operating point, including supply voltage, output swing, load, noise, stability, and the desired closed-loop gain. Decoupling capacitors should be placed close to the supply pins, and unused inputs must be connected to a defined potential. Because rail-to-rail operation and output swing are distinct concerns, confirm the datasheet limits for the selected supply and load conditions. This page organizes the key TLV2451ID characteristics, sourcing guidance, package information, and design considerations into a practical engineering reference. It also identifies confirmed related family members while clearly separating direct drop-in options from variants that do not provide enough evidence for unrestricted replacement.

RFC Hubungi kami
TLV2451IP - 6V, 220kHz RRIO Low-Power Op Amp | Texas Instruments
TLV2451IP

TLV2451IP - 6V, 220kHz RRIO Low-Power Op Amp | Texas Instruments

Texas Instruments TLV2451IP is a single, 6 V, 220 kHz, low-quiescent-current operational amplifier with rail-to-rail input and output capability. It consumes 23 µA per channel and is offered in an 8-pin PDIP package for through-hole PCB assembly. The combination of low supply current, 220 kHz gain-bandwidth product, and rail-to-rail operation makes the device suitable for portable instrumentation, sensor interfaces, battery-powered measurement systems, and general-purpose analog signal conditioning. An operational amplifier is a voltage-controlled, high-gain analog building block used to amplify, filter, buffer, compare, and drive signals. The TLV2451 belongs to the linear operational-amplifier family within the broader voltage-amplifier and analog IC hierarchy. Rail-to-rail input capability allows the amplifier to operate near the positive and negative supply limits, while rail-to-rail output operation permits the output voltage to approach the supply rails under suitable load conditions. The principal features of the TLV2451IP are its 6 V maximum supply rating, 23 µA quiescent current, 220 kHz gain-bandwidth product, and single-amplifier configuration. Its low quiescent current reduces the supply demand of continuously powered circuits, while 220 kHz of bandwidth provides useful dynamic performance for low-frequency sensing, filtering, and control tasks. The PDIP format also supports conventional through-hole insertion, lead inspection, and straightforward prototyping. Technically, the TLV2451 combines a micropower operating point with rail-to-rail input and output stages. This balance is valuable when signals must be sensed close to the supply rails but the application cannot tolerate the higher supply current of many conventional rail-to-rail amplifiers. Because the device is intended for low-voltage operation, its supply voltage and input common-mode range must be checked against the actual circuit. Exact offset, drift, output-current, noise, and stability limits should be confirmed in the manufacturer datasheet before a precision or capacitive-load design is released. Typical applications include low-power sensor conditioning, portable medical instrumentation, industrial process measurement, battery-operated data acquisition, audio and communication interfaces, and general-purpose analog control loops. In these systems, the TLV2451IP can provide input buffering, gain amplification, active filtering, threshold detection, or low-frequency drive without requiring a high-bandwidth, high-current amplifier. A key design consideration is stability with capacitive loading. The input and output network should follow the manufacturer datasheet guidance, especially when driving long PCB traces, ADC sample-and-hold inputs, multiplexers, or significant cable capacitance. Decoupling close to the supply pins, a suitable output isolation resistor, and a verified phase-margin margin are important for reliable low-power analog performance. This page combines the TLV2451IP manufacturer specifications, verified sourcing information, same-family drop-in alternatives, pin assignment guidance, application-oriented engineering notes, and parameter-by-parameter comparison data. It is designed to support component selection, PCB compatibility checks, and first-pass circuit planning without replacing the manufacturer datasheet for production release.

RFC Hubungi kami
TLV2452AIDGKR - Dual 23uA RRIO Op Amp 220kHz | Texas Instruments
TLV2452AIDGKR

TLV2452AIDGKR - Dual 23uA RRIO Op Amp 220kHz | Texas Instruments

The Texas Instruments TLV2452AIDGKR is a dual, micropower rail-to-rail input/output (RRIO) operational amplifier in an 8-pin VSSOP (MSOP, DGK) package. It operates from 2.7V to 6V single supply (or ±1.35V to ±3V dual supplies) while consuming only 23uA per channel, with a 220kHz gain-bandwidth product and 0.11V/us slew rate. An operational amplifier is a high-gain differential-to-single-ended voltage amplifier and a fundamental building block of analog signal chains, used as buffers, active filters, comparators, and transimpedance amplifiers. Op amps sit within the linear IC hierarchy alongside comparators and voltage regulators; the TLV2452 belongs to the low-power (micropower) op amp family, which prioritizes ultra-low quiescent current for battery-operated systems. Key features include true rail-to-rail input common-mode range and rail-to-rail output swing to within 5mV of each rail at light loads, maximizing dynamic range in low-voltage designs. The A-grade version guarantees a maximum input offset voltage of 1.5mV, and CMOS inputs deliver 1pA typical input bias current for high-impedance sensor interfaces. Micropower 23uA-per-channel consumption directly extends battery life in always-on circuits. Fabricated on a CMOS process, the TLV2452 offers high input impedance with internal ESD protection and is specified from -40C to +125C. The dual-channel DGK-8 package saves board space versus two single amplifiers. According to the TLV245x datasheet (Rev. F), the family also includes shutdown variants for further power savings. Typical applications include battery monitoring, portable medical devices, photodiode amplification, and low-power active filters. Rail-to-rail output allows direct ADC interfacing without level shifting, and the low quiescent current suits IoT always-on sensing. Design tip: decouple the supply with a 0.1uF ceramic close to V+, and remember the 220kHz GBW limits closed-loop bandwidth - keep gains and filter frequencies modest to preserve phase margin.

RFC Hubungi kami
TLV2452AIDGKR-Q1 - Dual 220kHz RRIO Op Amp, 23uA | TI
TLV2452AIDGKR-Q1

TLV2452AIDGKR-Q1 - Dual 220kHz RRIO Op Amp, 23uA | TI

The Texas Instruments TLV2452AIDGKR-Q1 is an automotive-grade (AEC-Q100 qualified) dual micropower rail-to-rail input/output operational amplifier consuming only 23 uA per channel while delivering 220 kHz of gain-bandwidth product, supplied in an 8-pin VSSOP (DGK) package. It operates from a single 2.7 V to 6 V supply and is qualified for AEC-Q100 Grade 1 temperature (-40C to +125C). A rail-to-rail input/output operational amplifier is a type of precision op amp within the broader analog amplifier family whose input common-mode range and output voltage swing extend to within millivolts of both supply rails. This maximizes dynamic range in low-voltage, single-supply systems where signal levels approach the rails, a capability conventional op amps cannot provide. Key features include the industry-leading 23 uA/channel quiescent current (far below competitive devices at similar bandwidth), 220 kHz gain-bandwidth product, rail-to-rail input and output (RRIO) operation, and high output drive capability for its power class. The dual-channel integration saves board space and reduces BOM count in multi-channel signal chains. The TLV245x family achieves its performance point through a trimmed CMOS input stage combined with rail-to-rail output buffer architecture, providing stable gain-bandwidth across the full load range. The related TLV245x family also offers shutdown variants (TLV2453/2455) for further average-power reduction in duty-cycled systems. Typical automotive and industrial applications include battery monitoring and current sensing front ends, low-power sensor signal conditioning, portable instrumentation, and microcontroller ADC driver stages, where micropower consumption directly extends battery life and reduces self-heating. Design consideration: because gain-bandwidth is 220 kHz, keep closed-loop gains moderate for signal bandwidths above a few tens of kHz; with 23 uA supply current, output current drive is limited, so avoid heavy capacitive loads without isolation resistors.

RFC Hubungi kami
TLV2452CP - Dual 6V RRIO Op Amp | Texas Instruments
TLV2452CP

TLV2452CP - Dual 6V RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2452CP is a dual, rail-to-rail input and output operational amplifier designed for low-voltage, low-power signal-conditioning systems. Its key operating characteristics include a 6 V maximum supply, 220 kHz gain-bandwidth product, and 23 µA quiescent current per channel. The device is offered in an 8-pin PDIP package for through-hole assembly. An operational amplifier is an analog semiconductor that amplifies the voltage difference between its differential inputs while providing high input impedance and low output impedance. The TLV2452CP belongs to the rail-to-rail input and output operational-amplifier family within the broader voltage-feedback amplifier and analog signal-processing hierarchy. Rail-to-rail operation allows input and output voltage swings to approach the supply rails, making this amplifier useful in battery-powered and compact embedded systems. The dual configuration provides two independent amplifier channels in one package, reducing board area when a system needs matched or simultaneous analog functions. The 220 kHz gain-bandwidth product is suitable for low-frequency sensor conditioning, audio pathways, and general-purpose signal processing. Its 23 µA quiescent current per channel reduces supply demand in battery-operated equipment, while rail-to-rail input capability improves dynamic range when the signal approaches either supply rail. The TLV2452 family also includes shutdown functionality, allowing the amplifier channels to be disabled when they are not required. Although the TLV2452CP is a commercial-temperature variant in the PDIP package, shutdown control, offset voltage, common-mode behavior, and output-current capability should be checked against the complete operating requirements before committing a design. The 8-pin PDIP format provides a large lead pitch, useful for prototypes, education, repair, and applications where through-hole assembly is preferred over fine-pitch surface-mount packaging. Typical applications include portable instrumentation, low-voltage sensor interfaces, battery-powered monitoring, audio input conditioning, and industrial control modules. Two channels can implement differential signal conditioning, active filtering, level shifting, transimpedance buffering, or independent gain stages. The low quiescent current is particularly useful when average standby power matters more than high-frequency closed-loop performance. The principal design trade-off is speed. A 220 kHz amplifier favors low-power and compact analog conditioning rather than high-bandwidth signal processing. Designers should verify source impedance, output-load compatibility, settling requirements, noise performance, and stability around the selected gain before finalizing the external resistor and capacitor network. This product record combines the manufacturer's device specifications with practical guidance on package selection, thermal and layout considerations, low-power operation, drop-in family options, and design trade-offs. It also identifies where application-specific electrical details require confirmation from the manufacturer datasheet before production release.

RFC Hubungi kami
TLV2453CN - Dual 6V RRIO Op Amp with Shutdown | TI
TLV2453CN

TLV2453CN - Dual 6V RRIO Op Amp with Shutdown | TI

The Texas Instruments TLV2453CN is a dual, 6 V, rail-to-rail input/output operational amplifier with shutdown in a 14-PDIP package. It combines a 220 kHz gain-bandwidth product with low quiescent current of 23 uA per channel, making it suitable for low-power analog signal conditioning. A rail-to-rail input/output operational amplifier is an analog amplifier whose input and output voltage ranges extend toward the positive and negative supply rails. Its place in the signal-chain hierarchy is amplifier IC, analog integrated circuit, semiconductor, and ultimately electronic component. The TLV2453 family serves general-purpose applications where low power, broad output swing, and shutdown control are more important than high bandwidth. Key features include two amplifier channels, 220 kHz gain-bandwidth product, 23 uA per-channel quiescent current, rail-to-rail inputs and outputs, and a shutdown function. The amplifier also provides a typical 20 uV input offset voltage and approximately ±10 mA output drive capability. These characteristics make the device useful for battery-powered instrumentation, sensor interfaces, and low-energy signal-processing systems. The 220 kHz gain-bandwidth product supports closed-loop operation at moderate signal frequencies while keeping quiescent power consumption low. Because the output can operate close to the supply rails, a 6 V system can retain useful signal range without a rail-to-rail output stage. Rail-to-rail input behavior improves common-mode range, although the input common-mode range, output swing limits, stability behavior, and noise characteristics should be checked against the manufacturer datasheet for the intended operating conditions. Typical applications include portable sensor conditioning, low-current data acquisition, battery-powered monitoring, industrial signal interfaces, and embedded analog measurement systems. In each case, the 23 uA per-channel quiescent current reduces standing power demand, while the shutdown pin can disable the amplifier when the system does not require continuous operation. Design around the 6 V maximum supply named for the device and verify input and output signal amplitudes before applying it to a precision measurement path. Keep sensitive input and feedback nodes away from switching nodes and noisy supply traces. When shutdown timing matters, account for the device's transition behavior and ensure the control signal remains within its specified voltage range. This page organizes the TLV2453CN's electrical characteristics, package information, application guidance, design considerations, and verified substitute availability into an engineering-focused selection resource. It also distinguishes documented drop-in alternatives from parts that require a different footprint or a broader design review.

RFC Hubungi kami
TLV2455CD - 220kHz Low-Power RRIO Op Amp | Texas Instruments
TLV2455CD

TLV2455CD - 220kHz Low-Power RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2455CD is a quad, low-power, rail-to-rail input/output operational amplifier with a 6 V maximum supply, 220 kHz gain-bandwidth product, and approximately 23 µA quiescent current per channel. The device is packaged in a 16-pin SOIC and is identified as a standard general-purpose amplifier. An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its two inputs. The TLV2455 belongs to the rail-to-rail input/output amplifier family within the broader operational amplifier, analog IC, and semiconductor hierarchies. Rail-to-rail input operation permits common-mode input voltages to approach the supply rails, while rail-to-rail output operation extends useful output swing toward both rails. The TLV2455CD combines four amplifier channels with approximately 23 µA of supply consumption per channel and a 220 kHz gain-bandwidth product. These characteristics make it suitable for portable and low-power signal-processing systems in which a conventional higher-current amplifier would waste available power. The family also includes a shutdown function, allowing connected circuitry to reduce supply consumption when operation is not required. The TLV2455 family operates from a 6 V maximum supply and is described by Texas Instruments as a low-quiescent-current amplifier family. Rail-to-rail input and output behavior is particularly useful when signals remain close to the positive or negative supply rail. Designers should still evaluate output swing, common-mode range, capacitive loading, and stability in the exact gain configuration rather than assuming ideal operation at the supply limits. Typical uses include low-power sensor interfaces, buffered analog measurement circuits, portable instrumentation, battery-powered signal conditioning, and general-purpose analog amplification. The quad-channel configuration can reduce the number of packages required when a design needs several low-frequency or moderate-bandwidth amplifier stages, particularly when the individual channels do not require simultaneous operation. A key design consideration is shutdown-state behavior and board-level power management. The shutdown pin should be driven with levels compatible with the device supply, and unused amplifier inputs must be returned to a valid common-mode potential rather than left floating. Input and output stability should be checked with the intended source impedance, load capacitance, feedback network, and PCB parasitics. This product page combines the manufacturer’s device identity with package, performance, application, and replacement guidance. It also distinguishes electrically similar ordering options from true pin-compatible alternatives and highlights the design checks engineers should complete before assigning TLV2455CD to a new analog board.

RFC Hubungi kami
TLV2455CN - 220 kHz Quad Rail-to-Rail Op Amp | Texas Instruments
TLV2455CN

TLV2455CN - 220 kHz Quad Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments TLV2455CN is a four-circuit, general-purpose operational amplifier with rail-to-rail input and output capability, a 220 kHz gain-bandwidth product, and 23 uA typical quiescent current, housed in a 16-pin PDIP package. The device includes a shutdown function and is intended for low-power applications requiring four amplifiers in one package. Its low operating current makes the TLV2455CN useful in portable instrumentation, sensor interfaces, audio signal paths, and general-purpose analog signal conditioning where supply efficiency and compactness are important. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The rail-to-rail input stage accepts signals close to the positive and negative supply rails, while the rail-to-rail output stage can swing close to those limits under suitable load conditions. Within the broader hierarchy, an operational amplifier is a linear amplifier and analog IC used for buffering, amplification, filtering, comparisons, feedback control, and signal conditioning. The TLV2455CN provides four rail-to-rail amplifiers, 220 kHz gain-bandwidth product, and approximately 23 uA typical quiescent current. These characteristics make it appropriate for general-purpose low-power designs that do not require the bandwidth of a high-speed amplifier. A shutdown function allows the circuit to reduce power consumption when the analog section is inactive. Its PDIP package also supports conventional through-hole assembly, prototyping, and manual inspection. Each amplifier is designed for conventional closed-loop operation using external feedback components. The combination of low quiescent current and rail-to-rail signal handling allows the device to operate close to its supply limits, reducing the required headroom in portable systems. Configuration resistors and compensation networks should be selected for the intended closed-loop gain because the bandwidth available for stable operation depends on that gain. Typical uses include low-frequency sensor conditioning, microphone preamplification, current-to-voltage conversion, active filtering, and four-channel buffering. The four independent channels can also implement common analog functions such as two differential amplifiers, two comparators with suitable output saturation limits, or instrumentation-style signal conditioning. The shutdown pin is useful when battery life is more important than maintaining an active analog state. For PCB design, keep input, feedback, output, and decoupling paths short, and place the power-supply bypass capacitor close to the device. Check input and output swing limits against the actual load and supply voltage. Because each channel is independent, unused amplifiers should be configured in a stable state rather than left with floating inputs. This product data combines the manufacturer-family characteristics, package information, sourcing metadata, and engineering design guidance to support amplifier selection, PCB implementation, and replacement planning for the TLV2455CN.

RFC Hubungi kami
TLV2455IN - 4-Channel 6V 220kHz RRIO Op Amp | Texas Instruments
TLV2455IN

TLV2455IN - 4-Channel 6V 220kHz RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2455IN is a four-channel, rail-to-rail input/output operational amplifier with shutdown, a 6 V supply rating, 220 kHz gain-bandwidth product, and low 23 µA quiescent current per channel. The device is packaged in a 16-pin through-hole DIP and is intended for low-voltage instrumentation, signal-conditioning, filtering, and portable analog systems. Its four amplifiers share one package, allowing compact implementation of multi-channel signal chains without using four separate monolithic packages. An operational amplifier is an analog signal-processing IC that compares its inverting and non-inverting inputs and amplifies the voltage difference between them. The TLV2455IN belongs to the low-dropout linear-amplifier family of voltage-feedback operational amplifiers, combining rail-to-rail input and output operation with low supply current. Rail-to-rail input capability supports sensing signals near the supply rails, while rail-to-rail output allows the output voltage to approach either supply limit within the device's operating limits. The principal electrical characteristics are a 220 kHz gain-bandwidth product, 23 µA typical quiescent current per channel, a 6 V supply rating, rail-to-rail input and output operation, a shutdown function, and 20 µV typical input offset voltage. The 220 kHz bandwidth supports moderate-frequency amplification and active filtering, while the four-channel configuration is useful for sensor buffers, differential stages, and multi-axis signal processing. Each amplifier can be configured with external resistors for noninverting, inverting, differential, filtering, or gain-control circuits. The low quiescent current is particularly valuable in battery-powered equipment where every amplifier channel contributes continuously to system power consumption. The shutdown feature can also reduce consumption when the analog section is not required, provided the enable logic and supply states meet the manufacturer's operating requirements. Typical uses include portable instrumentation, low-voltage sensor interfaces, audio and control-signal conditioning, active filters, and four-channel acquisition front ends. When designing the board, place each amplifier's feedback components close to its pins, keep input and output traces short, provide suitable bypassing at the supply pins, and avoid placing sensitive high-impedance inputs next to switching or high-current return paths. This product page combines manufacturer specifications, an electrically equivalent same-package option, application guidance, and package-aware design considerations. It helps engineers distinguish the TLV2455IN's shutdown-enabled function from other quad amplifier variants and plan a direct replacement without changing the 16-pin DIP footprint.

RFC Hubungi kami
TLV2460CD - 6.4MHz RRIO Op Amp with Shutdown | Texas Instruments
TLV2460CD

TLV2460CD - 6.4MHz RRIO Op Amp with Shutdown | Texas Instruments

The Texas Instruments TLV2460CD is a single, 6.4 MHz rail-to-rail input/output operational amplifier with shutdown, supplied in an 8-SOIC package. It is designed for low-voltage signal-conditioning systems requiring input and output swing close to the supply rails, a 6 V maximum supply rating, and a shutdown function for controlled power management. A rail-to-rail input/output operational amplifier is a voltage-feedback amplifier whose input common-mode and output voltage capabilities extend toward the positive and negative supply rails. This rail-to-rail behavior is useful in battery-powered and portable systems where the usable signal range is close to the available supply voltage. The TLV2460 belongs to the broader hierarchy of operational amplifier, analog amplifier, analog signal-conditioning IC, and semiconductor. The TLV2460CD provides one amplifier circuit, 6.4 MHz gain-bandwidth performance, low-power operation, and rail-to-rail input and output characteristics. Its 6 V maximum supply voltage supports low-voltage designs, while the shutdown control can reduce power consumption when the signal chain does not need to remain active. The 8-SOIC package provides a conventional surface-mount format with 0.154-inch body width and 3.90 mm width. Its 6.4 MHz bandwidth makes the device suitable for general-purpose voltage amplification, buffering, active filtering, and low-to-moderate-frequency signal conditioning. Rail-to-rail input operation permits sensing signals near either supply rail, while rail-to-rail output capability improves usable output range in low-voltage systems. The manufacturer identifies the device as a low-power RRIO amplifier with shutdown for general-purpose instrumentation applications. Typical uses include portable sensor interfaces, low-voltage analog signal chains, active filters, industrial measurement circuits, and embedded control systems. In a portable sensor interface, the amplifier can condition a sensor signal close to a low-voltage rail. In an active filter, its 6.4 MHz bandwidth provides frequency headroom above the intended passband. The shutdown pin is useful when the amplifier must be disabled during idle periods. Designers should verify supply range, input common-mode limits, output swing, stability, and shutdown logic for the operating conditions. Decoupling capacitors should be placed close to the supply pins, and sensitive analog inputs should be routed away from switching nodes. Because the exact pin names, electrical limits, and capacitor recommendations are not included in the product-page summary, use the manufacturer datasheet for final schematic and layout decisions. This page organizes the TLV2460CD device information, verified drop-in alternatives, application guidance, package details, and comparison criteria into one engineering-focused reference. It also identifies which technical details require confirmation from the manufacturer datasheet before layout, qualification, or production release.

RFC Hubungi kami
TLV2460CP - 6.4MHz RRIO Op Amp with Shutdown | TI
TLV2460CP

TLV2460CP - 6.4MHz RRIO Op Amp with Shutdown | TI

Texas Instruments TLV2460CP is a single, low-power, rail-to-rail input/output operational amplifier with shutdown, 6.4 MHz gain-bandwidth product, and a 6 V maximum supply rating. The device is packaged in an 8-pin PDIP and is intended for portable instrumentation, buffering, and general-purpose signal-conditioning systems. An operational amplifier is an analog integrated circuit that uses high-gain feedback to amplify a differential input voltage. The TLV2460CP belongs to the rail-to-rail input/output amplifier category, allowing its input and output operation to extend toward the supply rails. Within the broader hierarchy, it is an operational amplifier, analog amplifier IC, and signal-conditioning semiconductor designed for low-voltage systems. The TLV2460CP combines a single amplifier with rail-to-rail input and output capability, a 6.4 MHz gain-bandwidth product, and shutdown support. Its shutdown control can place the amplifier in a low-power state when signal processing is not required, helping reduce system consumption in portable equipment. The device is identified as a single 6 V, 6.4 MHz RRIO amplifier with shutdown by the Texas Instruments product page. Its rail-to-rail input characteristic is important for signal sources whose voltage swings approach either supply rail, while rail-to-rail output improves voltage headroom when driving a load at low supply voltages. The 6.4 MHz bandwidth supports applications requiring higher closed-loop bandwidth than a general-purpose low-frequency amplifier, although stable operation still depends on the selected feedback topology, noise gain, output loading, and compensation network. Typical uses include low-voltage sensor conditioning, portable test equipment, audio and communication signal paths, instrumentation buffering, and active filtering. The shutdown function is useful in battery-powered or intermittently operated systems where the amplifier must be disabled between measurement intervals. Rail-to-rail operation also makes the device applicable to systems in which the signal range occupies a substantial portion of the available supply voltage. Designers should verify the shutdown-pin polarity, input common-mode limits, output swing, stability requirements, and recommended capacitor values in the manufacturer datasheet before finalizing a PCB. Because this is an 8-pin PDIP rather than a surface-mount package, it is best suited to designs that prioritize easy inspection, prototyping, or through-hole assembly over compact board area. This page organizes the TLV2460CP identity, package, verified electrical highlights, sourcing questions, compatible family options, comparison parameters, and practical design guidance into one engineering reference. It also distinguishes confirmed manufacturer information from characteristics that require confirmation in the complete datasheet before production release.

RFC Hubungi kami
TLV2460ID - 6V, 6.4MHz RRIO Op Amp with Shutdown | Texas Instruments
TLV2460ID

TLV2460ID - 6V, 6.4MHz RRIO Op Amp with Shutdown | Texas Instruments

The Texas Instruments TLV2460ID is a single, 6 V, 6.4 MHz rail-to-rail input and output operational amplifier with shutdown capability, packaged in an 8-pin SOIC. It is designed for low-power, general-purpose signal conditioning and provides rail-to-rail input and output operation for portable instrumentation, sensor interfaces, audio signal paths, and embedded analog systems. The TLV2460ID supports an operating temperature range of -40°C to +125°C. An operational amplifier is an analog active device that uses high open-loop gain to amplify the difference between two input voltages. Rail-to-rail input capability allows the input common-mode voltage to approach the supply rails, while rail-to-rail output capability improves output swing in low-voltage systems. The TLV2460 belongs to the broader hierarchy of integrated circuits, analog amplifiers, voltage amplifiers, and general-purpose operational amplifiers. The main differentiating feature of the TLV2460ID is its shutdown function, which allows the circuit to reduce operating current when the analog section is not required. Its 6.4 MHz gain-bandwidth product supports applications that need higher signal bandwidth than a basic micropower amplifier. The device is identified as a single amplifier with one shutdown control, making it suitable for designs requiring one analog channel rather than a dual or quad amplifier. The TLV2460ID is used where a designer needs a compact, low-power amplifier with flexible input and output range. It can interface with sensors, buffer voltage references, perform active filtering, amplify audio or control signals, and condition inputs for higher-resolution converters. Its rail-to-rail behavior is particularly useful in systems powered from a single low-voltage rail, where conventional input and output ranges would leave insufficient headroom. When using the TLV2460ID, connect bypass capacitors close to the supply pins and keep feedback-resistor networks compact to minimize parasitic capacitance and instability risk. The shutdown pin should be driven with a defined logic level whenever the amplifier state matters. Verify input and output signal limits against the supply voltage, especially during startup, shutdown transitions, and transients. The 8-pin SOIC package supports standard surface-mount assembly and hand-soldering workflows. This page combines manufacturer and distributor references with drop-in replacement guidance, parameter comparisons, application notes, and practical PCB considerations for engineers evaluating the TLV2460ID in low-voltage analog designs.

RFC Hubungi kami
TLV2460IP - 6V, 6.4MHz RRIO Op Amp with Shutdown | Texas Instruments
TLV2460IP

TLV2460IP - 6V, 6.4MHz RRIO Op Amp with Shutdown | Texas Instruments

Texas Instruments TLV2460IP is a single-amplifier, rail-to-rail input/output operational amplifier with a 6 V supply rating, 6.4 MHz gain-bandwidth product, and shutdown capability, housed in an 8-pin PDIP package. The device combines a 1.6 V/us slew rate with input bias current of 14 nA and an input offset voltage of 500 uV, making it suitable for portable, low-voltage signal-conditioning systems. An operational amplifier is a voltage-controlled differential amplifier used to amplify errors and control feedback loops. The TLV2460 belongs to the rail-to-rail input/output amplifier category, with input common-mode range extending beyond the supply rails and output swing approaching both rails. This places it within the amplifier IC hierarchy of signal-chain and analog-conditioning components used in portable instrumentation, sensor interfaces, audio paths, and low-voltage industrial systems. The 6.4 MHz gain-bandwidth product supports higher closed-loop bandwidth than slower general-purpose amplifiers, while the 1.6 V/us slew rate improves response to fast voltage changes. Rail-to-rail input behavior increases usable signal range in low-voltage systems, and rail-to-rail output swing provides additional headroom. A shutdown function can reduce operating demand when the circuit is not active, although the exact shutdown timing and current values should be confirmed in the manufacturer datasheet. The TLV2460IP uses a conventional single-supply operational-amplifier architecture intended for low-voltage operation. Its 500 uV offset specification is relevant to precision DC conditioning, while the 14 nA bias current limits input-amplifier loading on high-impedance sources. Designers must still account for input bias-current error, offset drift, output-current limits, noise, and stability when applying it around sensors, filters, or feedback networks. Typical uses include portable battery-powered measurement systems, low-voltage sensor interfaces, audio signal conditioning, general-purpose analog filters, and industrial control modules. In each case, the 6 V maximum supply and rail-to-rail behavior are useful for compact systems where the signal can approach the available supply range. The PDIP package also favors through-hole assembly, prototyping, and designs that require a socketable amplifier. For stable operation, place input and feedback components close to the amplifier, decouple the supply pins, and verify output settling before clocked or measurement systems begin acquisition. Use shutdown only after checking timing relationships elsewhere in the circuit, because shutting down the amplifier during a conversion can invalidate the measurement. This page combines the manufacturer's device description with practical application guidance, drop-in family options, comparison parameters, and design guidance. It emphasizes verified package compatibility and practical trade-offs rather than treating differently packaged amplifier variants as direct replacements.

RFC Hubungi kami
TLV2461CP - 6.4MHz RRIO Op Amp | Texas Instruments
TLV2461CP

TLV2461CP - 6.4MHz RRIO Op Amp | Texas Instruments

Texas Instruments TLV2461CP is a single-circuit, 6 V, 6.4 MHz rail-to-rail input/output operational amplifier packaged in an 8-pin PDIP. It combines a 6.4 MHz gain-bandwidth product with rail-to-rail input and output capability, making it suitable for portable instrumentation, low-voltage signal conditioning, and general-purpose analog systems. An operational amplifier is an active analog circuit block that amplifies the voltage difference between its inverting and non-inverting inputs. Rail-to-rail input operation allows signals to approach the supply rails, while rail-to-rail output operation gives designers additional output swing near the limits of the available supply voltage. In the broader device hierarchy, the TLV2461CP belongs to the operational-amplifier and analog-signal-chain categories rather than the digital IC or power-management categories. The TLV2461 family is identified by Texas Instruments as a family of low-power, rail-to-rail input/output operational amplifiers with shutdown capability. The TLV2461CP provides one amplifier circuit in a through-hole PDIP package, which supports prototyping, educational platforms, and industrial assemblies where leaded components are preferred. Its stated 6.4 MHz bandwidth provides substantially more signal-path flexibility than low-frequency general-purpose amplifiers. A 6 V maximum supply rating supports operation from low-voltage portable systems, while the single-amplifier configuration avoids unused circuitry in applications needing one signal channel. Rail-to-rail inputs are useful when sensing small signals near a lower supply rail, and rail-to-rail outputs help preserve dynamic range when driving a subsequent analog stage. The 8-pin PDIP format also simplifies socket-based construction and hand-soldered prototype assembly compared with a fine-pitch surface-mount package. Typical uses include low-voltage sensor interfaces, portable measurement equipment, audio and communication signal conditioning, buffer stages, and active filtering. In a portable sensor circuit, the amplifier can sit close to the sensor and process a weak bipolar or unipolar signal before further conditioning. In an active-filter design, its 6.4 MHz bandwidth provides the transition-frequency and phase-margin margin needed for moderate-bandwidth filtering stages. Design should account for common-mode range, output swing, input bias current, noise, stability, and load capability under the actual supply voltage. Decoupling capacitors should be placed close to the supply pins, and signal routing should minimize parasitic capacitance. Because the TLV2461CP is a leaded PDIP device, board designers should also preserve adequate hole spacing and verify the orientation mark before soldering. This product page combines the manufacturer identity, ordering package, primary electrical headline, lifecycle context, sourcing guidance, and practical design considerations. It also distinguishes genuine same-package alternatives from parts that merely perform a similar function, helping engineers evaluate replacement decisions without assuming that package compatibility alone guarantees equivalent performance.

RFC Hubungi kami
TLV2461ID - 6V 6.4MHz RRIO Op Amp | Texas Instruments
TLV2461ID

TLV2461ID - 6V 6.4MHz RRIO Op Amp | Texas Instruments

Texas Instruments TLV2461ID is a single-circuit operational amplifier designed for low-power, rail-to-rail input and output operation from a 2.7 V to 6 V supply. Its 6.4 MHz gain-bandwidth product, 80 mA output capability, 66 dB instrumentation gain, and 0.075 µA quiescent current make it suitable for portable instrumentation, sensor interfaces, battery-powered equipment, and general signal-conditioning systems. The device is packaged in an 8-pin SOIC. An operational amplifier is an analog IC that amplifies the voltage difference between its differential inputs. A rail-to-rail input/output, or RRIO, amplifier can accept input signals near the positive and negative supply rails and produce output swings close to those rails. This makes the TLV2461 useful in systems whose signal range would exceed the usable input or output range of a conventional amplifier tied closely to its supply rails. The TLV2461ID combines a 6.4 MHz gain-bandwidth product with a low 0.075 µA quiescent current. According to the Texas Instruments product page, it is a single amplifier operating from 2.7 V to 6 V. Its input bias current of 1.3 nA is suited to high-impedance sources, while the listed 80 mA per-channel output current provides useful drive capability for typical analog stages. The amplifier also supports input and output operation across the supply rails. With a reported instrumentation gain of 66 dB, the device can be used in instrumentation and measurement circuits requiring moderate signal amplification. Its 6.4 MHz bandwidth supports higher-frequency feedback networks than a low-frequency precision amplifier. The SOIC-8 package is suitable for conventional PCB assembly, and the single-amplifier configuration provides a straightforward implementation for buffer, amplifier, comparator-style, and general-purpose analog applications. Typical applications include portable sensor conditioning, battery-operated measurement instruments, industrial low-power interfaces, audio and communication control paths, precision current-voltage conversion, and low-leakage photodiode front ends. The 1.3 nA input bias current is particularly relevant when the source impedance is high enough that amplifier input current materially changes the measured voltage. Designers should verify signal amplitude, output swing, input common-mode range, noise, and stability at the intended gain. Decoupling capacitors should be placed close to the supply pins, while high-impedance input nodes require short traces and guarded layouts to reduce leakage and interference pickup. This page combines the Texas Instruments device specifications with package guidance, application-oriented engineering notes, and same-package replacement options for engineers planning a TLV2461ID-based analog circuit.

RFC Hubungi kami
TLV2461IP - 6V RRIO 6.4MHz Op Amp | Texas Instruments
TLV2461IP

TLV2461IP - 6V RRIO 6.4MHz Op Amp | Texas Instruments

The Texas Instruments TLV2461IP is a single, 6 V, 6.4 MHz rail-to-rail input/output operational amplifier packaged in an 8-pin plastic DIP. It combines a low-noise amplifier core with rail-to-rail input and output stages for portable instrumentation, sensor signal conditioning, and low-voltage analog systems. The TLV2461IP provides one amplifier circuit in an 8-PDIP package. A rail-to-rail input/output operational amplifier is an analog signal-conditioning IC whose input common-mode range and output swing extend toward the positive and negative supply rails. This capability is useful when a signal approaches either supply limit, where a conventional fixed-range amplifier would clip or become nonlinear. Within the broader hierarchy, the TLV2461IP is an operational amplifier, an analog amplifier IC, and a semiconductor for low-voltage power management and signal processing. The principal device characteristics are a 6 V supply rating, 6.4 MHz gain-bandwidth product, and rail-to-rail input/output operation. The single-amplifier configuration supports space-efficient designs where one analog channel is sufficient. Its 8-PDIP construction also facilitates prototyping, educational circuits, and through-hole industrial assemblies where surface-mount rework would be inconvenient. The TLV2461 family targets portable and low-voltage applications where rail-to-rail signal handling is important. According to the Texas Instruments TLV2461 product information, the device is specified as a single 6 V, 6.4 MHz RRIO operational amplifier. Its architecture places the amplifier in the signal-conditioning hierarchy between a sensor or source and an ADC, transducer driver, or analog processing stage. Exact current, noise, offset, and temperature specifications should be confirmed in the manufacturer datasheet for the selected operating conditions. Typical uses include portable measurement systems, battery-powered sensor interfaces, low-voltage audio paths, industrial controls, and general-purpose analog filtering. In a sensor-conditioning circuit, the amplifier can accept signals near the supply rails while presenting low-versus-high input impedance to the source. In an active filter or level-shifting stage, rail-to-rail output behavior can reduce clipping when the calculated output approaches the available supply range. Designers should review the pin-description table, recommended operating conditions, electrical characteristics, and application information in the manufacturer datasheet before layout. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be handled according to the datasheet guidance rather than left floating when the configuration permits it. This page combines the TLV2461IP device identity, package information, verified manufacturer and distributor references, application guidance, and same-footprint alternatives into a focused engineering selection resource. It helps buyers evaluate the TLV2461IP for the Texas Instruments TLV2461 6 V RRIO operational-amplifier family while keeping board-level compatibility and application fit in view.

RFC Hubungi kami
TLV2462CD - Dual 6.4MHz RRIO Op Amp | Texas Instruments
TLV2462CD

TLV2462CD - Dual 6.4MHz RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2462CD is a dual, low-power, rail-to-rail input/output operational amplifier with a 6.4 MHz gain-bandwidth product, 1.6 V/µs slew rate, and 80 mA output-drive capability in an 8-pin SOIC package. The device operates from a 2.7 V to 5.5 V supply and consumes approximately 500 µA per amplifier channel, making it suitable for portable and low-voltage systems. An operational amplifier is an analog signal-conditioning IC that provides high open-loop gain and negative feedback to amplify or buffer a voltage signal. The TLV2462 belongs to the RRIO operational-amplifier family, where RRIO denotes rail-to-rail input and rail-to-rail output. This places the device in the broader hierarchy of analog ICs, signal-chain ICs, amplifiers, and general-purpose amplifiers. The TLV2462CD provides rail-to-rail input capability for a wide common-mode range and rail-to-rail output swing for improved dynamic range in low-voltage systems. Its 6.4 MHz bandwidth supports higher-frequency signal processing than a conventional micropower amplifier, while the 1.6 V/µs slew rate improves large-signal response. Two amplifiers in one SOIC package reduce board area, and the 500 µA-per-channel supply current supports battery-conscious portable equipment. The dual architecture allows the two channels to perform related or independent functions. Common uses include signal buffering, gain stages, active filtering, sensor-interface amplification, and low-voltage logic-level signal conditioning. Because both amplifiers share a common supply in one package, designers must also account for shared supply current, thermal behavior, ground routing, and channel-to-channel interaction. Typical applications include portable instrumentation, battery-powered monitors, sensor conditioning, audio and communication interfaces, and portable test equipment. The 80 mA output-drive capability is useful when driving moderate loads, while the rail-to-rail output allows useful output voltage to be obtained near the positive and negative supply limits. When designing around the TLV2462CD, verify output-current demand and capacitive-load stability for the selected feedback network. Keep input and feedback traces short, maintain a low-impedance ground reference, and use decoupling close to the supply pins. The available verified material does not provide a complete order-specific pin table, so the pinout field is conservatively marked as unavailable rather than inferred. This page combines verified manufacturer and distributor information with practical selection guidance, application analysis, honest data-gap notes, and same-family drop-in candidates. It distinguishes documented electrical attributes from specifications that require confirmation from the manufacturer datasheet before release to production.

RFC Hubungi kami
TLV2462ID - 6.4 MHz Dual RRIO Op Amp | Texas Instruments
TLV2462ID

TLV2462ID - 6.4 MHz Dual RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2462ID is a dual, low-power, rail-to-rail input/output operational amplifier with a 6.4 MHz gain-bandwidth product, 1.6 V/µs slew rate, and operation from a single 2.7 V to 6 V supply in an 8-pin SOIC package. The TLV2462ID uses one amplifier per package and is designed for portable and general-purpose signal-conditioning applications requiring low power, wide bandwidth, and rail-to-rail operation. An operational amplifier, or op amp, is a voltage-controlled differential amplifier whose closed-loop behavior is determined primarily by external feedback components. The rail-to-rail input and output architecture places the TLV2462ID within the low-voltage power-management hierarchy as an analog signal-conditioning IC. It can operate on a single supply or with dual supplies, making it useful where signals occur near either supply rail. The TLV2462 family provides a 6.4 MHz gain-bandwidth product and 1.6 V/µs slew rate. Its 6 V maximum supply voltage supports low-voltage portable equipment, while the dual configuration reduces the number of packages required for stereo, differential, filtering, or instrumentation circuits. The rail-to-rail input common-mode range and rail-to-rail output capability help preserve signal headroom in compact systems. The TLV2462ID is offered in an 8-pin Small Outline Integrated Circuit package. The manufacturer describes the TLV2462 as a low-power dual operational amplifier intended for portable applications. Its combination of moderate speed, low-voltage operation, and dual-channel integration supports signal buffering, sensor conditioning, audio paths, and general-purpose analog processing when the system does not require a higher-speed or lower-noise precision amplifier. Typical applications include portable sensor interfaces, low-voltage audio signal conditioning, battery-powered measurement systems, active filters, and dual-rail or single-rail analog front ends. Designers should verify the complete electrical limits, common-mode behavior, output swing, shutdown configuration, stability requirements, and package details against the manufacturer datasheet before production release, particularly where input signals approach the supply rails. For low-noise or high-impedance sensor interfaces, compare the TLV2462ID against a precision low-noise amplifier because its 6.4 MHz bandwidth favors speed and general-purpose signal handling. Maintain adequate bypass capacitance near the supply pins and keep sensitive input and feedback paths short to minimize parasitic pickup, oscillation, and sensitivity to board-level interference. This product record combines the verified 6.4 MHz bandwidth, 1.6 V/µs slew rate, 6 V supply limit, 8-pin SOIC construction, operating-temperature range, pricing floor, and distributor availability with practical design guidance. It also distinguishes directly identified ordering variants from true drop-in alternatives and flags electrical parameters that still require confirmation from the manufacturer datasheet.

RFC Hubungi kami
TLV2462QD - Dual RRIO 6.4MHz Op Amp | Texas Instruments
TLV2462QD

TLV2462QD - Dual RRIO 6.4MHz Op Amp | Texas Instruments

Texas Instruments TLV2462QD is a dual, low-power operational amplifier with rail-to-rail input and output capability, a 6.4 MHz gain-bandwidth product, and a 6 V maximum supply rating. The device is packaged in an 8-pin SOIC and is designed for portable applications where two amplifier channels are needed within a compact, low-power circuit. An operational amplifier is a voltage-gain component used to amplify small signals, buffer voltage sources, compare analog thresholds, and support feedback-based signal conditioning. The TLV2462 belongs to the operational-amplifier, analog-signal-conditioning, and power-management-IC hierarchy. Rail-to-rail input capability allows the amplifier to accept input voltages near the supply rails, while rail-to-rail output capability supports operation with limited output-voltage headroom. The TLV2462QD provides two amplifier channels in one package, reducing board area compared with separate single-channel devices. Its 6.4 MHz gain-bandwidth product supports signal paths requiring moderate bandwidth, and its specified 80 mA output-drive capability is useful for driving moderate loads. The manufacturer describes the family as low power, with a quoted supply current of 500 µA per channel, making it applicable to portable instrumentation and other compact battery-operated systems. Both channels share the same supply pins, but each channel can be configured independently as an amplifier, buffer, comparator, or active-filter element. The common package and dual-channel organization also simplify power distribution and reduce the number of external components required for dual-signal conditioning. Configuration depends on the feedback network, input impedance, source impedance, output loading, and required stability. Typical uses include portable sensor interfaces, low-level analog signal amplification, voltage buffering, threshold detection, audio preamplification, and general-purpose analog conditioning. The 6 V rating supports low-voltage systems, while the 8-pin SOIC package allows conventional surface-mount assembly. Care is still required when operating near the supply rails, driving capacitive loads, or selecting feedback values for stable closed-loop response. For design planning, verify the complete electrical limits and pin assignments in the manufacturer datasheet before layout release. Decoupling capacitors should be placed close to the supply pins, input and output routing should minimize parasitic capacitance, and unused amplifier inputs must be tied to a defined potential rather than left floating. This page combines package, performance, application, and replacement guidance to support early design decisions.

RFC Hubungi kami