Produk (44,000+)

ICS503MLF - 160MHz PLL Clock Multiplier | Renesas
ICS503MLF

ICS503MLF - 160MHz PLL Clock Multiplier | Renesas

Renesas ICS503MLF is a single PLL frequency multiplier with a maximum output frequency of 160 MHz, designed for clock-generation and frequency-synthesis applications. The device accepts a reference input in the 14 MHz to 160 MHz range, operates from a 3 V to 5.5 V supply, and is packaged in an 8-pin SOIC measuring 0.154 inch, or 3.90 mm, in width. It is a surface-mount clock-and-timing integrated circuit. A PLL frequency multiplier is a clock-and-timing semiconductor that multiplies a reference frequency to produce a higher or otherwise derived clock. Within the integrated-circuit hierarchy, a PLL multiplier belongs to clock generators and frequency synthesizers, which support clock-and-timing ICs and broader digital control systems. This type of circuit is useful when one stable reference must drive multiple digital domains, serialize parallel data, or establish a communication link at a required frequency. Key features include one PLL multiplier circuit, a maximum output frequency of 160 MHz, and an operating supply range of 3 V to 5.5 V. The 8-SOIC package offers a compact surface-mount solution, while the listed operating-temperature range of 0 °C to 70 °C places the device in the commercial temperature class. The clock and CMOS output description identifies it for systems requiring a multiplied or synthesized digital clock. The ICS503 architecture separates reference generation from frequency multiplication, allowing the device to produce a clock derived from an external source. Its 14 MHz to 160 MHz input range and 160 MHz maximum output provide substantial frequency coverage for legacy communications, control, and digital-logic equipment. Because the PLL is implemented in an integrated device, the design avoids implementing separate phase detection, charge-pump, voltage-controlled oscillator, and feedback-divider blocks on the PCB. Typical applications include legacy serial-interface clock recovery, industrial control systems, digital test equipment, communications modules, and embedded systems that require a CMOS clock beyond the available reference frequency. The device is particularly relevant when repairing or maintaining equipment designed around the Renesas or former IDT 503 clock-multiplier family rather than creating a new high-volume digital design. The primary engineering consideration is lifecycle compatibility. Current distributor listings show the exact 8-SOIC ordering code, but one technical listing also marks the family as obsolete or end-of-life. Before production commitment, verify the manufacturer lifecycle statement, exact pinout, loop-filter recommendations, input/output logic levels, and operating-temperature limits against the 503 datasheet. This product page combines the documented operating limits, package information, lifecycle considerations, application guidance, and available same-footprint alternatives. It also highlights design checks that are essential when substituting an obsolete PLL multiplier in legacy equipment.

RFC Hubungi kami
ICS503MT - LOCO PLL Clock Multiplier | Renesas | 8-SOIC
ICS503MT

ICS503MT - LOCO PLL Clock Multiplier | Renesas | 8-SOIC

The Renesas ICS503MT is a LOCO PLL clock multiplier and clock generator designed to produce a higher-frequency clock output from a lower-frequency crystal or clock input. The device is listed in an 8-SOIC surface-mount package, operates from a 3 V to 5.5 V supply, and supports a 0 °C to 70 °C operating-temperature range. It is categorized as a clock generator, PLL, frequency synthesizer, and clock/timing integrated circuit. A PLL clock multiplier is a timing semiconductor that uses phase-locked-loop technology to derive a stable output clock from a lower-frequency reference. This type of device belongs to the clock and timing IC hierarchy, alongside clock generators, frequency synthesizers, PLL-based multipliers, and other timing-control components. The ICS503MT is intended for systems that require a controlled clock relationship between an input reference and a multiplied output. The ICS503MT accepts either a crystal or clock input and produces a CMOS clock output. Its 8-SOIC package supports surface-mount assembly, while the listed reel packaging is suitable for automated production handling. The 3 V to 5.5 V operating-supply range allows use in conventional 3.3 V and 5 V digital systems when the downstream clock requirements match the device specifications. The device is identified as obsolete or end-of-life in the product information, so new designs should confirm lifecycle status and sourcing requirements before committing the ICS503MT to a production BOM. For an existing design, engineers should review the manufacturer datasheet for the exact multiplier ratios, crystal recommendations, output characteristics, timing limits, electrical limits, and package drawings before modifying the circuit. Typical uses for this device include legacy digital equipment, embedded control systems, communications equipment, and other clocked electronics that already have a validated ICS503MT board layout. The primary design consideration is preserving the original footprint and reference-source configuration; changing crystal frequency, load capacitance, supply voltage, or output loading can alter timing behavior. This page combines the listed package, electrical, environmental, lifecycle, and application characteristics with practical guidance for legacy-clock restoration and replacement assessment. It also distinguishes verified device facts from parameters that require confirmation in the manufacturer datasheet.

RFC Hubungi kami
ICS507M-01 - PECL Clock Synthesizer | Renesas | 16-SOIC
ICS507M-01

ICS507M-01 - PECL Clock Synthesizer | Renesas | 16-SOIC

Renesas ICS507M-01 is a PECL clock synthesizer and differential crystal oscillator circuit packaged in a 16-pin SOIC. It combines an external fundamental-mode crystal with internal frequency multiplication to produce a differential PECL clock. According to the Renesas 507-01 datasheet, a 10 MHz crystal connected to the ICS507-01 with the 12X output selected by S1=0 and S0=1 produces a 120 MHz PECL output clock. The part therefore serves as a clock-generation and timing IC rather than a conventional general-purpose oscillator. A crystal-based clock synthesizer provides a controlled relationship between a stable low-frequency reference and one or more higher-frequency outputs. This clock-generation approach is useful when a system needs a local timing reference without relying on a separate external clock generator. Differential PECL outputs are suited to high-speed digital interconnects because they can offer good noise immunity and signal-integrity characteristics when implemented with correct termination and routing. The ICS507-01 family supports selectable frequency multiplication, allowing a single crystal frequency to serve several clocking requirements. The documented 10 MHz-to-120 MHz example demonstrates a 12X multiplication ratio. Selection inputs S1 and S0 determine the active multiplier, while the crystal and external support components establish the operating frequency and stability. Exact output frequency ranges, tolerance limits, supply voltage, operating temperature, jitter, and output rise/fall times must be taken from the manufacturer datasheet before final design release. The 16-pin SOIC package is used in a differential clock topology that includes a crystal, supply bypass components, mode-setting inputs, and output circuitry. Layout is especially important because unequal or overly long clock traces can degrade edge quality and introduce deterministic or random jitter. Differential pair routing, solid return paths, controlled impedance, and short output connections should be treated as core layout requirements rather than optional refinements. Typical uses include telecom line-card timing, network-interface clock generation, instrumentation, test-and-measurement equipment, industrial control, and other systems requiring a local high-frequency reference clock. In each case, the crystal frequency, selected multiplier, output standard, supply requirements, and downstream receiver timing must be checked together before the component is committed to a PCB. The principal design consideration is to validate the complete clock path at the target frequency. Start with the manufacturer reference topology, use the documented crystal and termination values, and preserve symmetrical differential routing. Decoupling should be placed directly beside the supply pins, mode-selection logic must remain stable during operation, and unused outputs require the termination strategy specified by the manufacturer. The SOIC outline and pin numbering should also be checked against the specific ordering code and assembly variant used in the BOM. This page organizes the confirmed ICS507M-01 clocking characteristics, practical PCB guidance, documented multiplier example, and verified drop-in candidates into an engineering-focused selection resource. It supports early architecture and sourcing decisions while directing final component validation to the Renesas manufacturer datasheet.

RFC Hubungi kami
ICS508M - 250 MHz PECL-to-CMOS Clock Converter | Renesas
ICS508M

ICS508M - 250 MHz PECL-to-CMOS Clock Converter | Renesas

The Renesas Electronics ICS508M is a single-circuit clock converter that generates a high-quality CMOS clock output from a PECL input and supports frequencies up to 250 MHz. The device is packaged in an 8-pin SOIC measuring 3.90 mm wide, with separate VDD supply connections identified in the manufacturer documentation. It operates without a PLL, uses a 1:1 input-to-output ratio, and has one differential input section with a single-ended CMOS output. A clock converter is a clock-and-timing IC used to bridge incompatible electrical interfaces while preserving the timing information of a periodic signal. Within the broader hierarchy, a clock converter belongs to clock generation and timing ICs, alongside clock buffers, clock multipliers, dividers, phase-locked loops, and distribution devices. The ICS508M is specifically a logic-level conversion device rather than a frequency synthesizer, so its main function is interface translation instead of frequency multiplication or division. The verified headline characteristics are a maximum operating frequency of 250 MHz, PECL input, CMOS output, a 1:1 input-to-output ratio, no PLL, and one clock circuit. These features make the ICS508M useful when a system contains a high-speed PECL clock source but the receiving logic requires a CMOS-compatible clock. The 1:1 relationship means the converter does not intentionally change the fundamental clock frequency while transferring it between the two logic families. The ICS508 uses separate supply connections for its input and output sections, a characteristic that helps the two interfaces operate in their respective voltage domains. The manufacturer documentation also identifies the ICS508 as a cost-effective method for producing a high-frequency CMOS clock from a PECL source. Exact supply-voltage tolerances, input-output delay, output jitter, rise and fall time, temperature range, and package dimensions beyond the stated width were not available in the supplied verified data and therefore require confirmation from the manufacturer datasheet. Typical clock-converter applications include high-speed digital backplanes, telecommunications timing interfaces, FPGA or ASIC clock-interface conversions, and legacy systems that mix ECL-family clocking with CMOS logic. The ICS508 can also be evaluated for instrumentation and test systems where a PECL oscillator is available but the destination device expects a CMOS clock. In every case, the source and destination logic levels, voltage rails, edge-rate requirements, and system timing budget must be checked before implementation. A key design practice is to treat the PECL input and CMOS output as separate high-speed signal paths. Use short, impedance-controlled connections, minimize parasitic capacitance, provide the required local decoupling, and validate source and load termination with an oscilloscope or suitable high-bandwidth test equipment. Do not infer differential signal integrity, jitter performance, or logic thresholds from the basic frequency and interface specifications alone. This product record combines the verified distributor and manufacturer data with an explicit distinction between documented facts and missing parameters. It also identifies where application-specific companion parts may help engineers build a broader clocking system, while clearly noting that no pin-compatible replacement was verified by the supplied cross-reference results.

RFC Hubungi kami
ICS508MI - 250MHz PECL to CMOS Clock Generator | Renesas
ICS508MI

ICS508MI - 250MHz PECL to CMOS Clock Generator | Renesas

The Renesas Electronics ICS508MI is a single-channel clock generator and PECL-to-CMOS converter rated to 250 MHz, with a 1:1 input-to-output ratio, housed in an 8-pin SOIC (0.154 inch, 3.90 mm width) surface-mount package. It accepts a PECL reference clock and produces a CMOS clock output from a 2.375 V to 5.5 V supply, and it belongs to the ICS508 ClockBlocks clock generator family. A clock generator is a timing IC that produces a stable, distributed clock signal for the digital blocks of a system. A PECL-to-CMOS converter is a specialised clock-buffer function: positive emitter-coupled logic (PECL, also called ECL) is a high-speed differential-style bipolar logic standard used inside high-speed telecom and datacom equipment, while CMOS is the low-noise, low-power logic family used by most modern ASICs, FPGAs and processors. A converter of this type sits in the hierarchy clock generator > clock buffer > clock and timing IC > integrated circuit, and it is used when a design must translate an ECL/PECL domain clock onto a CMOS domain rail without adding a PLL or changing the fundamental frequency. Key features of the ICS508MI include a maximum operating frequency of 250 MHz, a single output circuit with no internal PLL, a fixed 1:1 divide ratio between input and output, and a differential-input capable interface. The device operates from a 2.375 V to 5.5 V supply and is specified in the 8-SOIC surface-mount package, with tube packing indicated by the MI ordering suffix. Architecturally the ICS508MI is deliberately simple. There is no PLL, no VCO and no programmable divider chain, so the output is a buffered and level-shifted replica of the input clock with deterministic phase behaviour and very low added jitter relative to PLL-based solutions. The ICS508 family uses separate supply pins for the PECL input side and the CMOS output side, which allows the converter to be operated at the supply level that best suits each side of the interface, such as 5 V PECL driving a 2.5 V CMOS core. Typical applications include telecom line-card and cross-connect equipment, network interface cards, SONET/SDH and Ethernet line cards, high-speed backplane distribution, test and measurement instrumentation, and any board that mixes ECL/PECL clocking with CMOS logic. The key design consideration is supply partitioning: keep the PECL and CMOS supply rails decoupled, terminate PECL inputs with the appropriate bias network, and observe the recommended output termination to avoid edge degradation at 250 MHz. This page consolidates the ICS508MI specifications, drop-in alternatives, packaging details and practical layout guidance into one reference, adding engineering context that is not in the manufacturer datasheet itself.

RFC Hubungi kami
ICS508MIT - 250 MHz PECL-to-CMOS Converter | Renesas
ICS508MIT

ICS508MIT - 250 MHz PECL-to-CMOS Converter | Renesas

Renesas Electronics ICS508MIT is a PECL-to-CMOS clock converter with a maximum operating frequency of 250 MHz, packaged in an 8-pin SOIC. The device accepts a PECL clock input and produces a high-quality CMOS clock output, providing a practical interface between differential clocking systems and conventional CMOS logic. Its one-to-one input-to-output ratio preserves the incoming clock frequency, while separate supply domains support voltage translation between the PECL input and CMOS output sections. A clock converter is a digital interface IC that translates one signaling standard into another while maintaining clock timing and frequency. In the broader semiconductor hierarchy, the ICS508MIT belongs to the clock and timing category rather than a PLL-based frequency synthesizer. It does not multiply, divide, or modulate the input clock; its primary function is level and logic-family conversion. This makes it suitable for systems in which an upstream serializer, transceiver, or other high-speed logic device generates a PECL clock but the receiving block requires a CMOS reference. The ICS508MIT supports clock frequencies from 0 Hz to 250 MHz, as identified in the manufacturer datasheet information. Its input is PECL and its output is CMOS, with a 1:1 input-to-output ratio. Separate VDD supplies allow the input and output voltage domains to be configured independently. This separation is valuable when the source device uses one PECL supply arrangement while the destination logic operates at another CMOS voltage. The device is offered in an 8-pin SOIC package and is associated with tape-and-reel ordering code MIT. Because it performs direct conversion rather than frequency synthesis, the ICS508MIT avoids the loop bandwidth, divider noise, and lock-acquisition considerations associated with PLL clock generators. Its timing performance therefore depends primarily on the quality of the incoming PECL clock and the integrity of the implemented circuit. Typical uses include high-speed communications equipment, parallel data acquisition, telecommunications backplanes, test and measurement instruments, and digital subsystems that require CMOS clocking from a PECL source. In these applications, the converter can provide a clean CMOS reference while preserving the source clock's fundamental frequency. Input and output supply decoupling, controlled-impedance routing, and correct common-mode treatment of the PECL interface remain central implementation considerations. Designers should follow the pin-description table in the manufacturer datasheet when assigning PCB tracks, and should verify signal amplitude, supply sequencing, and termination at the operating frequency. The SOIC footprint permits conventional surface-mount assembly, although package-parasitic effects and board loss become increasingly important as clock rates approach the 250 MHz upper limit. This page combines the manufacturer-family specifications, package information, sourcing structure, interface guidance, and drop-in replacement analysis to support faster engineering evaluation. Use the Request a Quote form for current commercial availability, lead time, and ordering support.

RFC Hubungi kami
ICS508MT - 250 MHz PECL-to-CMOS Clock Converter | Renesas
ICS508MT

ICS508MT - 250 MHz PECL-to-CMOS Clock Converter | Renesas

Renesas Electronics ICS508MT is a PECL-to-CMOS clock converter with a maximum operating frequency of 250 MHz, a 1:1 input-to-output ratio, and one clock channel. The device converts a differential PECL clock input into a single-ended CMOS clock output, providing a practical interface between high-speed PECL circuitry and conventional CMOS logic. It is housed in an 8-pin SOIC package measuring 3.90 mm in body width. A clock converter is an interface IC within the clock and timing hierarchy, where clock-generation and clock-buffer functions support digital logic, communications, and signal-processing systems. PECL, or positive emitter-coupled logic, is a high-speed differential signaling format, while CMOS provides a single-ended output suitable for driving conventional digital circuitry. The ICS508MT bridges these electrical domains without using a PLL. Key features include a 250 MHz maximum clock frequency, one converter circuit, a 1:1 input-to-output ratio, and separate VDD supplies for voltage translation. Differential clock input supports noise-resistant high-speed transmission, while the CMOS output provides a compatible signal for downstream digital logic. The absence of a PLL also means no multiplication or division function is added by this device. Technically, the ICS508MT is a clock translator rather than a frequency synthesizer. It preserves the input clock relationship at its output while changing the interface from differential PECL to single-ended CMOS. Separate supply domains allow the input and output circuitry to operate from different supply voltages, which is useful when connecting clock sources and logic devices that use different rail levels. Designers must still provide suitable decoupling and high-speed routing between the source, converter, and receiving logic. Typical applications include telecommunications and data-communications clock distribution, high-speed digital backplanes, FPGA clock interfaces, network equipment, and test instrumentation. The part is particularly appropriate when a board contains a PECL clock source but the receiving logic requires a CMOS-compatible clock. When designing around the ICS508MT, prioritize short, controlled impedance traces, solid grounding, and manufacturer-recommended bypass capacitors. Check that the PECL common-mode and termination arrangement matches the clock-source requirements, and verify the output supply and logic thresholds against the downstream device. This page combines the defining ICS508MT specifications, practical interface guidance, and verified drop-in alternatives. It also distinguishes the device from true clock generators and PLL-based converters so engineers can select it according to interface, frequency, packaging, and supply-domain requirements.

RFC Hubungi kami
ICS511M - 200MHz LOCO PLL Clock Generator | Renesas Electronics
ICS511M

ICS511M - 200MHz LOCO PLL Clock Generator | Renesas Electronics

Renesas Electronics ICS511M is a LOCO PLL clock generator IC designed to produce a high-quality high-frequency clock output from a lower-frequency crystal or clock input. The verified distributor information identifies the device as a 200 MHz clock generator with PLL capability, CMOS output, and an 8-SOIC surface-mount package measuring 0.154 inch, or 3.90 mm, in width. Its operating supply range is 3.135 V to 5.25 V. A clock generator is a timing IC that converts a stable low-frequency reference into a higher-frequency clock required by digital logic, communications equipment, processors, and interface circuits. A phase-locked loop, or PLL, is the feedback-based clock architecture used in the ICS511M. In this product hierarchy, ICS511M is a clock generator with PLL capability, belonging to the clock and timing IC family within integrated circuits and power-management-adjacent digital systems. The LOCO product family is intended to provide economical frequency multiplication and clock distribution functions. The principal verified specifications include a maximum frequency of 200 MHz, one clock circuit, PLL operation, clock or crystal input, and CMOS output. These characteristics make ICS511M suitable for systems that require a local high-frequency clock without using a dedicated high-speed processor clock tree. The 8-SOIC package supports conventional surface-mount assembly and is distinct from larger leaded packages. The 3.135 V minimum and 5.25 V maximum supply limits place it in a low-voltage digital supply range. The typical clock-generation topology connects a crystal or external clock source to the input, configures the PLL multiplication ratio, and feeds the resulting CMOS clock into the target digital subsystem. This arrangement can reduce the number of high-frequency clock sources required across a board while centralizing frequency generation. Compared with a free-running oscillator, the PLL approach allows the output frequency to be related to an external reference. Compared with a microprocessor that includes an internal PLL, ICS511M provides a separate timing source that can be shared by multiple functional blocks when the circuit design allows it. ICS511M can be used in communications equipment, digital control systems, embedded processing platforms, clocked logic, and industrial or consumer electronics requiring a stable high-frequency reference. Designers should verify the complete input-frequency range, output-frequency limits, jitter, duty-cycle, timing, and loop-filter requirements against the manufacturer datasheet before finalizing a design. Those parameters are not present in the supplied verified web data and must be confirmed before production use. This page combines verified distributor and manufacturer references, the available LOCO-series identification, a package-level comparison framework, and practical selection guidance. It also distinguishes verified information from parameters that require datasheet confirmation, helping engineers evaluate ICS511M without treating generic PLL or clock-generator claims as part-specific facts.

RFC Hubungi kami
ICS511MI - 160MHz Single PLL Clock Generator | Renesas
ICS511MI

ICS511MI - 160MHz Single PLL Clock Generator | Renesas

The Renesas Electronics ICS511MI is a single-phase-locked-loop clock generator with a maximum operating frequency of 160 MHz, clock or crystal input, and CMOS output in an 8-pin SOIC package. Its 1:1 input-to-output ratio and low-cost LOCO architecture are designed for generating a high-quality clock output from a lower-frequency crystal or clock source. A clock generator is an integrated timing device that converts a reference clock or crystal into one or more stable timing signals. Within the broader semiconductor hierarchy, the ICS511MI is a PLL clock generator, a clock and timing IC, and ultimately a power-management-adjacent frequency-generation component. Its single-channel structure simplifies designs that require a local high-frequency clock rather than a more complex multi-output timing architecture. The ICS511MI provides a maximum operating frequency of 160 MHz, accepts either clock or crystal input, and produces a CMOS output. The listed input-to-output ratio is 1:1, indicating that the generated output frequency corresponds directly to the supplied reference relationship. Its operating temperature range extends from -40°C to +85°C, allowing operation across industrial temperature environments when the external reference and load conditions meet the device requirements. Internally, the device uses a single PLL to multiply or organize a lower-frequency reference into a higher-frequency clock. This approach offers a practical alternative to relying solely on a high-frequency external oscillator when the system requires a locally generated, specified timing signal. The one-circuit implementation also reduces board area compared with solutions containing several clock-generation channels. Typical applications include communication equipment, digital signal-processing systems, frequency conversion, clock multiplication, and general digital subsystems requiring a local CMOS clock. The ICS511MI is particularly relevant to compact designs where an 8-pin surface-mount package and a single clock output are preferred over a larger multi-channel timing device. Designers should select the reference frequency and external loop-filter components according to the manufacturer recommendations, then verify output jitter and acquisition behavior across the intended frequency range. Board layout should keep the crystal or clock path short, provide a clean return path, and place support components close to the device to reduce susceptibility to noise and parasitic feedback. This product page combines the ICS511MI device identity, verified operating parameters, packaging information, drop-in comparison candidates, and practical design guidance. It also highlights the distinctions that matter when evaluating clock-frequency range, package compatibility, reference input method, and application suitability before making a replacement decision.

RFC Hubungi kami
ICS511MIT - 160MHz PLL Clock Multiplier | Renesas | 8-SOIC
ICS511MIT

ICS511MIT - 160MHz PLL Clock Multiplier | Renesas | 8-SOIC

The Renesas ICS511MIT is a PLL-based clock generator and clock multiplier with a maximum operating frequency of 160 MHz, supplied in an 8-SOIC surface-mount package. It is designed to derive a multiplied clock from an external clock or crystal reference for precision timing systems. The IC is listed as an obsolete product, so designers should confirm availability, lifecycle status, and any last-time-buy terms before starting a new production design. A PLL clock multiplier belongs to the clock and timing IC family. Unlike a simple logic inverter or buffer, it uses a phase-locked loop to lock an internal or output frequency to a stable reference and multiply that reference by an integer ratio. Clock generators and frequency synthesizers sit within the broader timing-control hierarchy used to coordinate processors, transceivers, memory, and data-conversion equipment. The primary identified characteristics are a 160 MHz maximum clock frequency, a PLL clock-multiplier function, and an 8-SOIC package measuring 0.154 inch, or 3.90 mm, in body width. The ICS511MIT is also described as a high-frequency clock generator intended for precision applications. Its supported input sources are identified as a clock or crystal, and it belongs to the ICS511 series. Because the device is obsolete, lifecycle planning is more important than headline performance differences. An existing design can often continue using the same ICS511 family pin arrangement, but a clock source is a board-level dependency: replacement parts must reproduce the reference frequency, output frequency range, output drive, and pin mapping. A nominal maximum frequency alone does not guarantee timing compatibility with an existing circuit. Typical uses include precision frequency multiplication in communications equipment, clock distribution for high-speed digital subsystems, test and measurement instrumentation, and timing architectures that require a derived clock rather than a free-running oscillator. In such systems, the PLL output replaces or supplements a lower-frequency reference while preserving phase coherence with the reference source. When laying out a board, route the reference input and clock outputs away from noisy switching nodes and provide a stable ground reference beneath the device. Keep clock traces short, use controlled-impedance routing when operating at high edge rates, and confirm the exact output-divider and feedback configuration against the manufacturer datasheet before releasing a new layout. This page combines the identified device characteristics, lifecycle information, cross-reference results, and practical clock-tree guidance. It also documents the limitations of an obsolete timing IC so procurement and engineering teams can assess redesign risk rather than relying on a headline frequency rating alone.

RFC Hubungi kami
ICS511MT - 200MHz PLL Clock Generator | Renesas Electronics
ICS511MT

ICS511MT - 200MHz PLL Clock Generator | Renesas Electronics

The Renesas Electronics ICS511MT is a single-output PLL clock generator IC designed to produce a high-frequency CMOS clock from a lower-frequency crystal or clock input, with a maximum output frequency of 200 MHz. It is packaged in an 8-pin SOIC measuring 3.90 mm wide. The ICS511MT is identified as a LOCO PLL clock multiplier, a clock-generation approach used to multiply a reference clock while providing a stable, high-quality output for digital systems. A PLL clock generator, also called a frequency multiplier or clock synthesizer, belongs to the clock and timing IC category. It uses a phase-locked loop to derive an output frequency from a reference source. The reference can be a crystal oscillator or external clock, and the generated CMOS output is suitable for systems requiring a higher-frequency operating clock than the source provides. Key features of the ICS511MT include PLL clock multiplication, a maximum frequency of 200 MHz, one clock circuit, CMOS output, and support for both crystal and clock inputs. The 1:1 input-to-output ratio is listed for the device, while the PLL architecture provides a practical route to generating a high-frequency clock from a lower-frequency reference. Its single-circuit configuration suits designs requiring one multiplied clock rather than multiple independently generated outputs. Technically, the ICS511MT is intended for clock generation where the output must be derived from a stable reference. The use of a crystal input supports designs that require predictable frequency behavior, while clock input support allows the device to operate from an existing system reference. The CMOS output interface makes it relevant to digital logic, processor, communications, and embedded-control systems requiring a high-speed clock signal. Typical applications include clocking for digital processors, communications equipment, test and measurement systems, embedded control platforms, and general-purpose digital logic. The device can reduce the need for multiple external clock-generation solutions when a single high-frequency CMOS clock is sufficient. Its principal benefit is clock multiplication in a small 8-SOIC package, although board-level stability, jitter, supply requirements, and output-drive limits must be checked against the manufacturer datasheet before finalizing a design. For PCB implementation, place the device close to the crystal, decoupling capacitors, and clock-consuming circuits to minimize trace length and noise pickup. Follow the manufacturer’s recommended crystal load-capacitance network, provide stable supply decoupling, and route the output as a short, controlled-impedance clock trace. Confirm pin orientation, operating limits, and crystal requirements directly from the manufacturer datasheet and the package drawing. This product summary combines the device’s identified LOCO PLL architecture, 200 MHz maximum frequency, CMOS output, input options, package format, sourcing context, and practical clock-tree design considerations to support faster component selection and PCB planning.

RFC Hubungi kami
ICS512M - 200MHz Clock Generator | Renesas Electronics
ICS512M

ICS512M - 200MHz Clock Generator | Renesas Electronics

The Renesas Electronics ICS512M is a 200 MHz clock generator IC with a PLL and bypass function, supplied in an 8-pin SOIC package measuring 0.154 inch, or 3.90 mm, in width. The listed device provides one clock-generation circuit, accepts a clock or crystal input, produces a CMOS output, and supports a 1:2 input-to-output ratio. According to the supplied distributor and manufacturer listings, its core function is to generate a high-quality, high-frequency clock output and a reference clock from a lower-frequency crystal or clock source. A PLL clock generator is a clock-and-timing integrated circuit that multiplies or organizes an input reference into one or more system clock outputs. Its place in the broader hierarchy is PLL clock generator > clock generator > clock and timing IC > integrated circuit. The ICS512M is therefore used when a system needs a more stable, controlled, or distributed clock derived from a lower-frequency source, especially where crystal and clock reference generation must share one compact device. The verified listing identifies the ICS512M as a 200 MHz clock generator with PLL bypass, crystal or clock input, CMOS output, one circuit, and a 1:2 ratio. These characteristics make it applicable to communication hardware, RF systems, digital boards, clock generation, timing distribution, and synchronization. The 8-SOIC surface-mount package supports compact designs where a through-hole clock generator would be unnecessarily large. The PLL architecture allows the device to produce a high-frequency output from a lower-frequency crystal or reference clock while retaining a bypass path for direct clocking. This architecture is useful when the design needs both a reference source and a multiplied clock without implementing multiple separate timing components. The 1:2 ratio is the most specific verified functional detail for the ICS512M, while other device parameters are not stated in the supplied search data. Typical uses include generating reference and operating clocks for communication equipment, synchronizing digital subsystems, supporting RF signal-chain timing, and furnishing a CMOS clock to board-level logic. In a multi-clock system, the device can reduce the number of discrete oscillator and divider blocks, but the final loop-filter, crystal, decoupling, and output-loading design must follow the manufacturer datasheet before production release. The primary design consideration is to confirm the exact input range, output waveform, jitter, operating temperature, and bypass behavior against the Renesas ICS512 datasheet. Engineers should also validate startup, crystal loop stability, and output loading in the intended PCB environment because those values are not fully provided in the retrieved search snippets. This page consolidates the verified Renesas and distributor information, separates confirmed specifications from missing datasheet parameters, identifies same-family drop-in candidates, and adds practical procurement and design guidance for engineers evaluating ICS512M clock-generation requirements.

RFC Hubungi kami
ICS512MI - 160MHz PLL Clock Multiplier | Renesas Electronics
ICS512MI

ICS512MI - 160MHz PLL Clock Multiplier | Renesas Electronics

Renesas Electronics ICS512MI is a single PLL clock-multiplier clock generator with a maximum output frequency of 160 MHz, supplied in an 8-pin SOIC package. It accepts a clock or crystal input, provides bypass operation, and uses CMOS output circuitry. These characteristics position the ICS512MI in the clock and timing hierarchy as a phase-locked-loop clock generator rather than a conventional fixed-frequency oscillator. A PLL clock multiplier is a timing IC that derives one or more stable clock outputs from a lower-frequency reference. Its phase-locked loop compares the reference with an internal feedback signal and adjusts the generated output to maintain phase and frequency relationships. In the ICS512MI, the input can be a clock signal or crystal, while PLL bypass allows the system to select a direct clock path when required. This combination supports frequency conversion and clock distribution in computing, networking, communication, and industrial systems. Principal features include a maximum clock frequency of 160 MHz, one clock-generation circuit, CMOS output, PLL capability with bypass, and a stated input-to-output ratio of 1:2. The 8-pin SOIC package provides a compact surface-mount form factor suitable for conventional PCB assembly. The device is positioned as a low-cost oscillator alternative when a system needs a high-quality multiplied clock or reference clock derived from a lower-frequency source. Technically, the important design consideration is that the reference source, loop behavior, output stability, and bypass mode must all be evaluated as one clock-generation system. A crystal-connected design provides a stable reference, while an externally driven clock offers flexibility in systems that already have a reference available. The bypass path should be evaluated for startup sequencing, glitch behavior, and output-source transitions using the manufacturer’s recommended circuit and timing information. Typical uses include processor and peripheral clock generation, communication-system reference clocks, network-interface timing, industrial control modules, and general-purpose frequency multiplication. The ICS512MI can be especially useful where replacing a higher-cost crystal oscillator with a programmable PLL-based clock source simplifies board-level frequency planning. When laying out a PCB, route the input, feedback, ground, and clock-output paths with attention to return paths and switching-edge behavior. Follow the manufacturer datasheet for recommended crystal-load components, decoupling, grounding, and maximum operating conditions. Validate timing margin in the assembled system rather than relying only on nominal frequency figures. This page combines the ICS512MI specifications, package details, practical clock-design guidance, and clearly qualified replacement information to support faster engineering evaluation and sourcing.

RFC Hubungi kami
ICS512MIT - 160MHz PLL Clock Generator | Renesas Electronics
ICS512MIT

ICS512MIT - 160MHz PLL Clock Generator | Renesas Electronics

Renesas Electronics ICS512MIT is a 160MHz PLL clock generator IC with one CMOS output, clock or crystal input, and an 8-SOIC package measuring 0.154 inch or 3.90mm in width. The device is designed to generate a high-quality high-frequency clock output and a reference clock from a lower-frequency crystal or clock input using phase-locked-loop techniques. A PLL clock generator is a timing IC that multiplies or synthesizes a clock frequency while providing a stable reference for digital and analog systems. The ICS512 belongs to the clock and timing hierarchy within integrated circuits, where it functions as a frequency multiplier and clock source. Its low-cost oscillator architecture is intended to replace conventional crystal oscillators in many electronic systems. Key features include a maximum operating frequency of 160MHz, one clock or crystal input, one CMOS output, and PLL operation with bypass capability. The input-to-output ratio listed for the device is 1:2, allowing a lower-frequency reference to generate a higher-frequency clock. The operating supply range is 3V to 5V, and the specified operating temperature range is -40°C to +85°C. The PLL-based architecture uses a standard fundamental-mode crystal to establish a stable reference, then multiplies that reference to generate the requested output clock. Bypass mode provides a practical path for clock distribution or test configurations. The CMOS output is suited to digital logic, communication equipment, consumer electronics, and embedded systems requiring a centralized clock source. Typical applications include digital controller boards, communication modules, industrial control equipment, test and measurement systems, and embedded products that require a multiplied clock or reference signal. The 8-SOIC surface-mount package supports compact board layouts while keeping assembly compatible with conventional SOIC-8 footprint practices. Designers should confirm the crystal frequency, PLL ratio, output waveform, load capacitance, and bypass configuration against the manufacturer application guidance. Decoupling capacitors should be placed close to the supply and ground pins, and clock traces should be routed with controlled impedance and minimized loading. This product page combines the manufacturer specifications, package information, lifecycle status, practical design notes, and sourcing guidance for engineers evaluating the ICS512MIT as an obsolete clock-generation component or replacement candidate.

RFC Hubungi kami
ICS512MT - 200MHz LOCO PLL Clock Multiplier | Renesas | 8-SOIC
ICS512MT

ICS512MT - 200MHz LOCO PLL Clock Multiplier | Renesas | 8-SOIC

The Renesas Electronics ICS512MT is a LOCO PLL clock multiplier and clock generator IC that multiplies a low-frequency crystal or external clock reference up to a maximum output frequency of 200 MHz at a 1:2 multiply ratio, housed in an 8-pin SOIC package with a 0.154 inch (3.90 mm) body width. It accepts a clock or crystal oscillator input, drives CMOS clock outputs, and includes a bypass path so the PLL can be disabled when a direct reference clock is preferred. A clock multiplier is a phase-locked loop (PLL) based timing device that takes a low-cost, low-frequency reference source - typically a crystal oscillator running between 2 MHz and 50 MHz - and synthesises a much higher, phase-locked output frequency. In the product hierarchy, a clock multiplier sits under clock generator ICs, inside clock and timing ICs, within integrated circuits, and ultimately falls under the broader timing and clocking element of any digital or RF system. Its purpose is to deliver high-quality, stable, jitter-controlled timing from an inexpensive reference. Key features of the ICS512MT include a PLL with bypass capability, a maximum output frequency of 200 MHz, a 1:2 input-to-output ratio, CMOS output signalling, and a single clocking circuit on board. The bypass mode allows the same board to be used in test or low-power configurations where the PLL lock time or power consumption is undesirable. Because the part is a multiplier rather than a general-purpose fractional-N synthesiser, the design is simpler, cheaper, and typically lower in phase noise than a programmable synthesizer of comparable output rate. Technically the ICS512MT uses a phase-locked loop that compares a divided output against the reference input and continuously corrects the internal voltage-controlled oscillator until the multiplier ratio is satisfied. Locking behaviour, reference-to-output jitter, output drive strength, and supply requirements are governed by the manufacturer datasheet, which should be consulted for absolute maximum ratings, recommended decoupling, and crystal load-capacitance selection. Typical uses include telecommunications line-card and base-station clocking, networking equipment clock synthesis, instrumentation and test-and-measurement front ends, industrial control and data acquisition systems, and any board that must convert a modest-frequency oscillator into a 200 MHz domain clock for high-speed serial links or ADC/DAC sampling systems. When designing around this device, pay particular attention to reference jitter and loop bandwidth: a crystal reference with excessive phase noise will multiply that noise by the same ratio at the output, and a noisy reference cannot be corrected downstream. Keep supply decoupling tight and route the crystal or reference input away from high-current switching nodes to preserve the low-jitter behaviour the LOCO architecture is intended to deliver. This page consolidates the device specification, family drop-in options in the same SOIC-8 footprint, comparison tables and practical design notes, giving an engineer the decision context that a bare distributor listing does not.

RFC Hubungi kami
ICS513M - 140MHz LOCO PLL Clock Generator | Renesas
ICS513M

ICS513M - 140MHz LOCO PLL Clock Generator | Renesas

The Renesas ICS513M is a LOCO PLL clock generator and fanout distributor with a maximum output frequency of 140 MHz, one clock circuit, CMOS output, and an 8-pin SOIC package. It accepts a crystal or external clock input and includes PLL bypass functionality, allowing it to generate a high-quality clock from a 14.31818 MHz crystal or clock source. The 1:2 input-to-output ratio reported in the verified product data supports clock multiplication use where a higher-frequency CMOS clock is required. A PLL clock generator is a clock-and-timing semiconductor that locks an internal phase-locked loop to a reference oscillator and multiplies or redistributes that reference into one or more stable digital clock outputs. In the product hierarchy, a PLL clock generator belongs to clock generation and distribution, then clock and timing ICs, then broader semiconductor and digital IC categories. It is used where a circuit requires a controlled relationship between a low-frequency crystal reference and a higher-frequency operating clock. The ICS513M's principal verified features include a 140 MHz maximum operating frequency, CMOS output logic, one clock circuit, support for both crystal and clock inputs, and PLL bypass capability. Its 8-SOIC package measures 3.90 mm in width according to the distributor listing. The 1:2 input-to-output ratio makes the device relevant to systems that need frequency multiplication from a standard 14.31818 MHz reference. Technically, the ICS513M combines reference generation with phase-locked-loop multiplication and clock distribution. The verified descriptions characterize it as a cost-effective way to produce a high-quality, high-frequency clock output. PLL bypass provides a selectable operating mode for designs that require direct reference-clock behavior rather than multiplied output, although the supplied data does not specify bypass propagation delay, jitter, lock time, or loop bandwidth. Typical uses include digital logic timing, communication equipment, embedded processing, and general-purpose clock distribution where a crystal or external clock is available. The ICS513M can be used as a clock source for circuits requiring a CMOS-compatible, multiplied clock derived from 14.31818 MHz. Its single-circuit fanout structure is appropriate for designs that need one primary high-frequency clock rather than multiple independently programmable outputs. When implementing the ICS513M, verify the crystal load capacitance, feedback-divider configuration, operating voltage, and output timing against the manufacturer datasheet. The verified snippets do not provide supply-voltage limits, output rise or fall times, phase jitter, RMS period jitter, or cycle-to-cycle jitter. Those timing and electrical details should be confirmed before using the device as a direct replacement for a different PLL generator. This page consolidates the verified distributor specifications, genuine source links, application guidance, and same-family replacement candidates. It also distinguishes confirmed ICS513M parameters from unavailable electrical and timing data so engineers can make a traceable component-selection decision rather than treating unsupported values as guaranteed specifications.

RFC Hubungi kami
ICS513MLF - 140MHz Clock Generator | Renesas Electronics
ICS513MLF

ICS513MLF - 140MHz Clock Generator | Renesas Electronics

Renesas Electronics ICS513MLF is a LOCO PLL clock-generator and fanout distribution IC rated to 140 MHz, with one clock output in an 8-pin SOIC package measuring 0.154 inches wide and 3.90 mm. It operates from a 4.5 V to 5.5 V supply and uses CMOS-compatible interfaces. The device is designed to generate a stable, high-quality clock from a 14.31818 MHz crystal or external clock input. A PLL clock generator is a clock-timing semiconductor that multiplies a reference frequency and distributes the resulting clock to digital circuits. A crystal reference provides a stable time base, while the internal phase-locked loop derives the required output frequency. Clock-generator ICs belong to the clock and timing hierarchy, where they sit between frequency references and the clocks consumed by processors, communications equipment, and digital logic. ICS513MLF combines a 140 MHz maximum stated operating frequency with a single clock output and a 5 V supply range. Its LOCO positioning emphasizes a cost-effective implementation for common digital clocking needs. The lead-free 8-SOIC package supports conventional surface-mount assembly and is suitable for compact industrial, communications, and embedded systems that need a local clock source without employing a more complex high-performance frequency synthesizer. The device operates with CMOS-compatible signals and can use either a 14.31818 MHz crystal or a clock input as its frequency reference. During implementation, the crystal, load capacitance, supply decoupling, and output-drive configuration determine whether the generated clock meets the timing and jitter requirements of the downstream circuit. The manufacturer datasheet should be consulted for the exact reference configuration and electrical limits before finalizing a high-speed design. Typical uses include clocking digital controllers, standardizing clock distribution across a compact circuit board, and replacing a board-level oscillator plus divider arrangement with a single timing IC. The single-output configuration is especially appropriate when only one derived clock is needed. In multi-domain equipment, the ICS513MLF can supply a common local clock where clock quality and frequency are adequate but multi-output fanout or differential clocking is not required. PCB implementation requires short return paths and careful treatment of the crystal and high-speed clock traces. Place the reference components close to the device, connect the supply to a low-impedance ground plane, and route clock outputs away from noisy switching nodes. Verify output rise time, duty cycle, jitter, and load capacitance in the finished layout because the complete timing performance depends on component selection and board implementation. This page combines the identified electrical ratings, package details, sourcing guidance, and application-oriented design considerations for ICS513MLF. It also distinguishes the device from related clock-generator references while clearly identifying parameters that require confirmation against the manufacturer datasheet before production release.

RFC Hubungi kami
ICS513MT - 140MHz PLL Clock Generator | Renesas Electronics
ICS513MT

ICS513MT - 140MHz PLL Clock Generator | Renesas Electronics

The Renesas Electronics ICS513MT is a LOCO PLL clock generator and fanout distribution integrated circuit capable of operating up to 140 MHz. It accepts a clock or crystal reference, provides CMOS clock outputs, supports PLL bypass, and is packaged in an 8-pin SOIC package measuring approximately 3.90 mm wide. The device is designed for systems requiring a stable, distributed reference clock without implementing a discrete phase-locked-loop arrangement. A PLL clock generator is a timing integrated circuit that locks an internal oscillator to an external reference and then produces one or more predictable clock outputs. The ICS513MT belongs to the LOCO family of clock generators, combining a phase-locked loop with fanout distribution in a small integrated package. Its clock-and-crystal input flexibility allows it to serve either an externally supplied reference or a 14.31818 MHz crystal, depending on the system architecture. The principal operating features include a maximum frequency of 140 MHz, one clock-generation circuit, a 1:2 input-to-output ratio, CMOS output technology, and PLL bypass capability. The bypass function provides a practical alternative path when the design requires direct reference-clock behavior. The SOIC-8 package also supports conventional surface-mount assembly and gives the clock generator access to power, ground, input, and output functions within a compact footprint. Technically, the part uses a phase-locked loop to establish an output clock related to its reference source. Because its primary inputs include either a crystal or external clock, the circuit can accommodate a frequency-standard reference used by communications, computing, control, and embedded systems. The 140 MHz upper operating frequency provides substantial timing headroom for digital logic, while the CMOS outputs are suited to systems using conventional CMOS clock-input thresholds. Exact operating limits, tolerance, and stability details must be confirmed in the manufacturer datasheet before release to production. Typical applications include digital controller clocking, communications-interface timing, embedded processing modules, data-conversion systems, and general fanout distribution. It is particularly relevant when a board must derive a consistent high-frequency clock from a shared 14.31818 MHz reference while maintaining a compact surface-mount layout. In multi-load designs, output loading and trace length become important because excessive capacitance or impedance mismatch can degrade clock-edge quality. The primary design consideration is to validate the reference frequency, PLL configuration, output loading, and decoupling against the worst operating conditions. Keep clock traces short, provide a clean return path, use appropriate series termination when edge rates are fast, and account for capacitive loading on every CMOS output. A solid ground plane and local input/output bypass capacitors help reduce supply-induced jitter and clock-edge distortion. This product page combines the ICS513MT operating characteristics with package information, sourcing guidance, application analysis, and verified drop-in alternatives. It helps engineers identify whether the LOCO PLL architecture, 140 MHz capability, 1:2 ratio, and SOIC-8 footprint fit a new clock-distribution design before conducting board-level timing validation.

RFC Hubungi kami
ICS514M - 140MHz PLL Clock Generator | Renesas | 8-SOIC
ICS514M

ICS514M - 140MHz PLL Clock Generator | Renesas | 8-SOIC

Renesas Electronics ICS514M is a 140MHz clock generator and fanout-distribution IC that uses a phase-locked loop to multiply a 14.31818MHz crystal or clock reference. It is packaged in an 8-pin SOIC measuring 3.90mm wide and operates from a 3V to 5.5V supply in the commercial 0°C to 70°C temperature range. A clock generator is a timing IC that converts a stable low-frequency reference into one or more higher-frequency clock signals. Clock generators and fanout-distribution devices form part of the broader clock and timing IC category, supporting clock synthesis, distribution, and system timing in digital equipment. The ICS514M uses PLL multiplication to provide a practical alternative to selecting and sourcing a high-frequency crystal for every clocked circuit. The device supports a 14.31818MHz crystal or clock input and reaches a maximum output frequency of 140MHz. Its configurable S1 and S0 input pins provide operating-state control referenced in the datasheet: when S1 and S0 are both low, the internal PLL is disabled, the CLK output remains low, and the crystal oscillator and REF output remain active. This permits a system to retain reference-clock availability while suppressing the divided or multiplied clock output. The 8-pin surface-mount SOIC package supports compact clock-generation layouts in industrial, communications, consumer, and embedded equipment. Operating from 3V to 5.5V makes the device usable with both 3.3V and 5V system rails, although the complete external crystal, load-capacitor, and output-loading design must be evaluated against the manufacturer datasheet. Its maximum 140MHz rating is a key selection criterion for processors, programmable logic, communications equipment, and digital peripherals requiring a multiplied reference. A primary design consideration is that PLL programming, crystal accuracy, load capacitance, output jitter, and allowable operating modes must be checked before layout release. Decoupling capacitors should be placed close to the supply pins, and clock traces should be routed with controlled impedance and short return paths to minimize noise pickup and crosstalk. The stated 140MHz maximum should not be treated as guaranteed performance for every crystal and output-divider configuration. This product page consolidates the verified manufacturer and distributor information, provides engineering-oriented selection guidance, identifies same-footprint alternatives, and highlights design details that help buyers compare ICS514M clock generators more efficiently than a basic distributor listing alone.

RFC Hubungi kami
ICS514MT - 140MHz Loco PLL Clock Generator | Renesas
ICS514MT

ICS514MT - 140MHz Loco PLL Clock Generator | Renesas

Renesas Electronics ICS514MT is a Loco PLL clock generator with a maximum operating frequency of 140 MHz, CMOS output, and support for either a 14.31818 MHz crystal or an external clock input. The device is packaged in an 8-SOIC package measuring 0.154 inch, or 3.90 mm, in width. Its PLL includes a bypass function, allowing it to support both synthesized and bypassed clock-generation paths. A PLL clock generator is a timing integrated circuit that multiplies, divides, or conditions an input clock to produce one or more stable output frequencies. In the broader semiconductor hierarchy, the ICS514MT belongs to the clock and timing IC family, where PLLs are used alongside oscillators, dividers, buffers, and clock trees to distribute timing signals throughout electronic systems. Its LOCO architecture is intended to provide an economical frequency-generation solution from a common crystal reference. The ICS514MT accepts a clock or crystal input and produces a CMOS clock output. Its maximum frequency is 140 MHz, and its input-to-output ratio is listed as 1:2. The PLL and bypass functions give designers the option to retain a direct source-clock path or use phase-locked synthesis. These features are useful where a system needs more than one frequency domain but only a small number of clocks. The single-circuit architecture keeps the design focused on one principal clock-generation function. A crystal-based implementation can use the specified 14.31818 MHz reference, while an external clock input offers flexibility when another oscillator already provides a suitable reference. Because the output technology is CMOS, the device is intended to interface with digital logic operating at compatible voltage levels, subject to the operating limits and supply requirements defined in the manufacturer datasheet. Typical uses include communications equipment, digital signal-processing systems, embedded-control platforms, frequency-sensitive test equipment, and general-purpose digital subsystems. In a communications design, the part can create a stable high-frequency operating clock for a synthesizer, controller, or data-conversion chain. In test equipment, it can provide a repeatable reference for timing-sensitive measurement or processing sections. PCB implementation should preserve short clock paths and suitable return paths to minimize susceptibility to noise and crosstalk. Place the crystal, input circuitry, decoupling capacitors, and output load close to the device where the layout guidance permits. Check the bypass-mode state before system startup so that the intended clock path is established consistently. This product overview combines the ICS514MT device classification, operating limits, package information, drop-in replacement evidence, and application guidance into one engineering reference. It also identifies design checks that are important beyond the basic 140 MHz headline specification, including PLL bypass behavior, source selection, clock routing, and package-level decoupling.

RFC Hubungi kami
ICS525-01R - 160MHz User-Configurable Clock | Renesas
ICS525-01R

ICS525-01R - 160MHz User-Configurable Clock | Renesas

The Renesas ICS525-01R is a user-configurable clock generator and fanout distribution IC with a maximum output frequency of 160 MHz, housed in a 28-pin SSOP package measuring 0.154 inch (3.90 mm) wide. The device is designed to replace discrete crystal-oscillator arrangements in systems where multiple logic domains require accurate, mutually related clock signals. A user-configurable clock, commonly called OSCaR, is a clock-generation IC whose output configuration is established with hardware select pins rather than a fixed factory divider ratio. The ICS525-01/02 family accepts a crystal or clock input and can generate nearly any supported output frequency from that source. Grounding or floating the configuration pins selects the required operating mode, making the ICS525-01R useful where the design must be adjusted without changing external components. Key features include a 160 MHz maximum output frequency, single-clock fanout capability, configuration through select pins, and operation from either a crystal or an external clock source. The 150 mil-body, 28-pin SSOP construction provides enough routing flexibility for a clock tree while remaining compatible with established surface-mount assembly methods. The -01R ordering suffix identifies the 160 MHz configuration within the ICS525 family. The ICS525-01R is part of the ICS525-01/02 family, whose architecture replaces a conventional crystal oscillator plus a separate divider or fanout arrangement with one configurable clock circuit. Its select-pin control allows a board designer to define the clock relationship required by processors, transceivers, converters, and data-conversion equipment. This integration reduces the number of discrete timing components while preserving accurate frequency relationships across the system. Typical uses include retrofitting a clock into an existing board, generating related clocks for multiple digital loads, supporting communication interfaces, and producing clocks for converters or test equipment. Because the family supports both crystal and external-clock drive, the device can suit new designs and legacy repairs where an original oscillator configuration is difficult to source. When assigning a replacement, confirm the selected frequency table, input-source arrangement, and output configuration against the board's original design. Place the clock source and decoupling close to the device, and route clock outputs as short, controlled-impedance traces. The select pins must be left grounded or floating as specified by the configuration table; do not add pull-up or pull-down resistors unless the board design requires them. This page adds practical configuration guidance, verified package and frequency information, a drop-in comparison, and sourcing guidance to the basic manufacturer datasheet information, helping engineers evaluate the ICS525-01R for both new designs and legacy clock-tree repairs.

RFC Hubungi kami
ICS525R-02 - 250MHz Configurable Clock Generator | Renesas
ICS525R-02

ICS525R-02 - 250MHz Configurable Clock Generator | Renesas

Renesas Electronics ICS525R-02 is a user-configurable clock generator and fanout distribution IC operating to 250 MHz and packaged in a 28-pin SSOP. The device accepts a crystal or clock input and uses a phase-locked loop to generate configurable high-frequency clock outputs, providing a compact clock-tree solution for digital systems that require multiple related frequencies from one reference. A configurable clock generator is a timing IC that combines a phase-locked loop, programmable frequency synthesis, and output distribution. In the product hierarchy, it belongs to clock and timing ICs and provides a bridge between a stable crystal or external reference and multiple clock domains. The OSCaR family is specifically designed to replace conventional crystal-oscillator arrangements in systems that need programmable frequency selection rather than one fixed output frequency. The ICS525R-02 supports a maximum output frequency of 250 MHz and includes PLL bypass functionality. Its user-configurable architecture permits engineers to select operating combinations of the voltage-controlled oscillator, reference frequency, and output dividers. The 28-pin SSOP has a 0.154-inch, 3.90 mm body width and integrates clock generation, fanout distribution, and programmable divider resources into one package. The PLL-based architecture provides a practical alternative to designing a fixed-frequency oscillator and separate divider or buffer networks. Bypass operation allows the device to be evaluated and integrated with an external clock path, while PLL operation supports synthesized outputs from a crystal or clock source. Exact divider ratios, VCO limits, jitter, output levels, and recommended crystal parameters should be selected using the configuration tables in the manufacturer datasheet. Typical uses include network-interface clock distribution, processor and FPGA clock trees, telecommunications timing, digital test equipment, and industrial control systems. The device is especially useful where several logic domains must be related to one frequency reference but cannot all use a simple fixed crystal oscillator. Short traces, terminated clock routing, and careful separation from high-speed data paths remain essential at the upper operating frequency. For implementation, evaluate every possible VCO, reference, and output-divider combination before committing to the PCB. Confirm the selected output frequency, duty-cycle tolerance, jitter requirement, crystal load capacitance, and I/O voltage against the manufacturer configuration guide. The SSOP footprint also requires assembly planning for its 0.154-inch body width and adequate lead-clearance spacing. This product record combines the device function, verified 250 MHz operating point, package information, configuration guidance, and practical replacement considerations. It is intended to help engineers identify whether the ICS525R-02 matches the required clock architecture before moving to a detailed design review.

RFC Hubungi kami
ICS525R-04 - 200MHz PECL Clock Generator | Renesas
ICS525R-04

ICS525R-04 - 200MHz PECL Clock Generator | Renesas

Renesas ICS525R-04 is a user-configurable clock generator that produces a high-quality differential PECL clock output up to 200 MHz. The device accepts a CMOS or crystal reference input, includes a PLL, and is packaged in a 28-pin SSOP. Its operating supply voltage is 4.5 V to 5.5 V. A clock generator is an integrated timing component that creates, conditions, and distributes a stable frequency reference through a system. The OSCaR family combines a phase-locked loop with selectable configuration pins, placing clock generation in the Clock & Timing IC category within the broader semiconductor and power-management ecosystem. Unlike a simple crystal oscillator, this architecture can support user-selectable output relationships and provide PECL-compatible differential outputs for high-speed digital circuitry. The ICS525R-04 supports a maximum operating frequency of 200 MHz and uses a PECL output interface. Configuration can be established through hardware-select pins rather than firmware or a device programmer, making the part useful where deterministic setup and minimal firmware support are priorities. The 4.5 V to 5.5 V supply range and SSOP-28 surface-mount package support established 5 V digital clocking systems. Internally, the OSCaR architecture uses a PLL to multiply or divide a crystal or external clock reference and generate the required output frequency. A PLL-based approach provides programmable frequency relationships while retaining a stable external reference. Differential PECL outputs are suited to short-reach, point-to-point interconnects where source-synchronous clocking, serializer/deserializer interfaces, or high-speed digital logic require low-skew clock distribution. Typical uses include telecommunications line cards, network-interface clock trees, high-speed serial links, test-and-measurement equipment, and industrial control systems. The same clock-generation approach can also support digital signal processors, FPGA clock planes, and communications processors when the system needs a locally generated PECL reference rather than a panel-distributed clock. When laying out the circuit, place the crystal and input decoupling close to the device and route differential outputs as a tightly matched pair with uninterrupted reference planes. The 28-pin SSOP footprint requires careful fanout because its narrow lead pitch can constrain escape routing on multilayer boards. Verify configuration-pin states during power-up and validate output frequency and duty-cycle behavior across the complete operating temperature range. This product record combines the oscillator function, principal electrical characteristics, package details, sourcing information, and practical implementation guidance in one engineering-focused reference. It also distinguishes verified device attributes from parameters that require confirmation from the manufacturer datasheet, helping designers move from component selection to a complete clock-tree design with fewer documentation gaps.

RFC Hubungi kami
ICS525R-11 User-Configurable Clock Generator | Renesas
ICS525R-11

ICS525R-11 User-Configurable Clock Generator | Renesas

Renesas Electronics ICS525R-11 is a user-configurable clock generator with a 40 MHz reference frequency and differential PECL clock outputs, supplied in a 28-pin SSOP surface-mount package. Its operating supply range is 3 V to 5.5 V, while clock-generator family documentation identifies 4.5 V to 5.5 V as a 5 V operating range for related ICS525R-11 variants. The device generates high-quality, high-accuracy clock outputs from an external crystal or clock source by configuring its select pins. A clock generator is a clock-and-timing integrated circuit that converts one reference source into one or more synchronized output frequencies. In the broader semiconductor hierarchy, the ICS525R-11 belongs to the clock generator and frequency synthesizer family, which supports microprocessors, programmable logic, network interfaces, communications equipment, and test systems. Its differential PECL outputs are suited to systems requiring a high-speed, low-noise clock rather than a conventional CMOS clock. The principal features are hardware-selectable configuration, a 40 MHz reference frequency, differential PECL clock generation, CMOS bus interfacing, and a 28-pin SSOP package. Grounding or floating the select pins allows the output frequency to be configured without firmware, software, or a device programmer. This makes the device useful where deterministic clock setup is preferred over programmable PLL control and where field configuration without a microcontroller is advantageous. Technically, the ICS525R-11 uses an inexpensive crystal or external clock as its frequency reference and derives a high-frequency differential output through the clock-generation architecture described for the ICS525 family. Differential signaling helps reduce susceptibility to common-mode noise on high-speed interconnects. Because the part is obsolete, existing installations can use it as a known-good supply source, but new designs should account for its limited product life-cycle availability. Typical applications include telecommunications and networking equipment, serial-interface clocking, FPGA or ASIC clock distribution, instrumentation, industrial control, and legacy data-acquisition systems. It is particularly appropriate when a fixed or selectable output frequency is needed, multiple dependent circuits require a coherent clock, and hardware-based configuration simplifies system startup. For PCB design, use the manufacturer pin-description table when assigning tracks, verify the selected-pin logic for the required output frequency, and provide clean reference-clock routing. Differential PECL traces should be routed as a matched pair with controlled impedance and short return paths to reduce edge degradation and jitter. This product summary consolidates electrical characteristics, package information, configuration details, lifecycle status, validated replacement information, and practical clock-routing guidance. It supports faster design review while preserving the distinction between confirmed device data and parameters that require confirmation from the manufacturer datasheet.

RFC Hubungi kami