Produk (44,000+)

ISL83491IB - 3.3V 10Mbps RS-485/RS-422 Transceiver | Renesas
ISL83491IB

ISL83491IB - 3.3V 10Mbps RS-485/RS-422 Transceiver | Renesas

Renesas Electronics ISL83491IB is a 3.3V, low-power, single-channel RS-485/RS-422 transceiver with integrated driver and receiver in a 14-pin SOIC package. The device supports full-duplex balanced communication and is specified for operation up to 10 Mbps, making it suitable for industrial control links, instrumentation, and communication equipment. Its BiCMOS architecture is designed to combine low supply current with controlled driver slew rate, helping reduce electromagnetic interference and ringing on transmitted signals. The manufacturer describes the ISL83491 family as meeting both RS-485 and RS-422 communication requirements. An RS-485/RS-422 transceiver is an interface IC that converts between digital logic-level signals and balanced differential lines. RS-422 is commonly associated with point-to-point, full-duplex links, while RS-485 supports multipoint buses with an enable-controlled driver. The ISL83491IB combines these functions in one device and includes separate transmit and receive control in its interface arrangement. This makes it useful when a system needs flexible line-driver enable control, galvanic distance between noisy equipment, and communication over cables longer or more exposed than ordinary TTL interconnects. The ISL83491IB is identified as a 3.3V device. The verified manufacturer product-page result identifies the family as a 3.3V, full-duplex, 10 Mbps RS-485/RS-422 transceiver with enable, while distributor records identify ISL83491IB as a 14-SOIC device. The part uses a BiCMOS implementation and a slew-rate-limited driver according to the family description. These features are significant in systems where transmitted edge rate, bus reflections, and power consumption need to be balanced rather than optimized only for maximum throughput. Typical uses include industrial sensor and actuator networks, factory automation equipment, building-control systems, test and measurement instruments, and embedded communication modules. The 3.3V supply operation integrates directly with modern microcontroller and digital-logic rails. Designers should still verify the complete electrical limits, receiver thresholds, driver timing, and recommended external components in the manufacturer datasheet before releasing a production design. This page combines the manufacturer family description with the available distributor records for ISL83491IB and provides practical guidance for package selection, enable control, cabling, and PCB implementation. The ISL83491IB is intended for designers who need a compact, low-power, high-speed balanced-interface solution rather than a general-purpose TTL transceiver. A key design consideration is preserving the intended RS-485/RS-422 topology. Driver enable polarity, termination placement, common-mode behavior, and connector grounding must be checked against the system wiring. The 10 Mbps capability does not remove the need for controlled-impedance cabling, proper topology, and correct termination strategy.

RFC Hubungi kami
ISL83491IP - 3.3V RS-485/422 Transceiver | Renesas
ISL83491IP

ISL83491IP - 3.3V RS-485/422 Transceiver | Renesas

The Renesas Electronics ISL83491IP is a 3.3 V, low-power, single RS-485/RS-422 transceiver designed for balanced serial-data communication in a 14-pin through-hole Dual Inline Package. The ISL83491IP combines one driver and one receiver, supports full-duplex RS-422 and half-duplex RS-485 networks, and operates from a 3 V to 3.6 V supply according to the product information. An RS-485/RS-422 transceiver is an interface IC that converts logic-level transmit and receive signals into differential, balanced line signals. Differential signaling improves noise immunity by rejecting common-mode voltage, while the RS-485 standard supports multipoint buses and the RS-422 standard supports point-to-point or multidrop balanced links. The ISL83491IP belongs to the broader transceiver hierarchy within interface ICs and industrial communication semiconductors. The device is described as a 3.3 V low-power BiCMOS part that can operate as either a high-speed transceiver or a slew-rate-limited device. This flexibility allows the same pinout and interface architecture to address data rates where low EMI is more important than maximum throughput. The single-driver, single-receiver arrangement also reduces component count in full-duplex RS-422 links, while the driver-enable and receiver-enable functions support controlled bus operation. The 14-pin DIP package is intended for through-hole PCB assembly and is useful in industrial control equipment, instrumentation, communications adapters, and legacy or leaded systems. A DIP footprint offers generous spacing between leads, which can simplify manual inspection, prototyping, and rework. Designers should still evaluate connector spacing, insulation requirements, grounding, and high-voltage creepage when the transceiver is used in an industrial enclosure. Typical applications include industrial RS-485 field buses, factory automation links, building-control networks, telemetry equipment, and data-acquisition systems. In an RS-485 network, the transceiver converts the controller's UART logic into a differential bus signal and converts differential bus data back into UART-compatible receive logic. In an RS-422 design, the driver and receiver can support separate point-to-point differential links. The primary design consideration is bus termination. Long or high-noise RS-485 cables generally use termination at both ends of the bus, while RS-422 commonly places termination at the receiver. The selected data-rate mode, cable length, topology, grounding method, and transceiver count should be evaluated together because excessive loading or incorrect termination can produce reflections and unstable differential voltage. This product summary consolidates the device function, interface standards, supply range, package details, verified comparison behavior, and practical implementation guidance into one engineering-focused reference for evaluating the ISL83491IP in new and existing through-hole designs.

RFC Hubungi kami
ISL83699IR - Low-Voltage Quad SPDT Analog Switch | Renesas
ISL83699IR

ISL83699IR - Low-Voltage Quad SPDT Analog Switch | Renesas

Renesas ISL83699IR is a low-voltage, ultra-low on-resistance, bidirectional quad SPDT analog switch designed for single-supply operation from 1.65 V to 3.6 V. The device provides four 2:1 switch circuits in a 16-QFN package measuring 3 x 3 mm, making it suitable for compact, battery-powered equipment and low-voltage signal-routing systems. An analog switch is a semiconductor device that connects or disconnects analog signal paths under digital control. A quad SPDT configuration provides four independent selectors, each able to choose between two signal paths. This makes the ISL83699IR useful in applications such as battery-powered instrumentation, mobile equipment, communication interfaces, and test systems where low-voltage logic compatibility, fast switching, and low on-resistance are important. Key features include an on-resistance of 0.26 ohm, switching times of tON = 10 ns and tOFF = 7 ns, and compatibility with 1.8 V digital logic when operated from a single 3 V supply. The low-voltage operating range allows the switch to operate directly from energy-efficient system rails. The 3 x 3 mm 16-QFN package reduces board area while supporting dense analog and mixed-signal layouts. The switch is bidirectional, so signal paths can be routed in either direction. Bidirectional operation is valuable when a shared line must connect a peripheral, test point, or alternate signal source without requiring a directional multiplexer. The 2:1 architecture supports source selection, signal swapping, isolation, and bus-sharing functions in compact systems. Typical applications include mobile-phone accessory routing, portable measurement equipment, battery-powered sensor interfaces, communication modules, and general-purpose analog signal routing. Designers should confirm that signal amplitudes remain within the device’s operating limits and that control logic levels meet the datasheet requirements. Adequate input and output decoupling, short analog traces, and careful grounding help preserve switching performance. The principal design trade-off is the very low supply-voltage range. The ISL83699IR is optimized for 1.65 V to 3.6 V systems rather than higher-voltage rails. Designers using the same package in another design should verify control thresholds, signal swing, switching timing, and the exposed-pad connection before committing to a footprint. This product page combines the manufacturer’s operating limits and switching characteristics with package information, application guidance, comparison data, and practical design notes. It is intended to accelerate engineering selection while keeping the final circuit decisions tied to the manufacturer datasheet and board-level requirements.

RFC Hubungi kami
ISL83699IV - Quad SPDT Analog Switch, 450mOhm, 16-TSSOP
ISL83699IV

ISL83699IV - Quad SPDT Analog Switch, 450mOhm, 16-TSSOP

Renesas Electronics ISL83699IV is a low-voltage, bidirectional quad SPDT analog switch with four independently controlled 2:1 channels, an on-resistance of 450 mOhm, and a 16-pin TSSOP package. The device operates from a single +1.65 V to +3.6 V supply and supports 1.8 V-compatible control inputs when operated from a single +3 V supply. An analog switch is a semiconductor interface that routes electrical signals between circuit nodes under digital control. The ISL83699 belongs to the SPDT analog-switch hierarchy, combining four bidirectional SPDT switches, also described as a dual DPDT configuration. This product type supports signal routing in compact, low-voltage electronic systems where fewer GPIO pins, limited board area, and faster switching are important. The quad-channel architecture provides four selectable signal paths in one package. Each switch has a specified 450 mOhm on-resistance and supports fast switching, with the manufacturer documentation reporting 10 ns tON and 7 ns tOFF. Bidirectional operation allows the same analog path to carry signals in either direction, making the device suitable for shared test, measurement, communication, and signal-routing interfaces. The ISL83699IV is designed for single-supply operation from +1.65 V to +3.6 V, covering common low-voltage system rails. Its control interface is compatible with 1.8 V logic when the device uses a single +3 V supply. This combination allows a system designer to connect low-voltage digital control signals directly to the switch while maintaining operation from a compact power source. Typical uses include battery-powered portable equipment, mobile-phone and portable-device signal routing, test-and-measurement systems, and other applications that need to multiplex analog signals through a limited number of external pins. The 16-pin TSSOP package supports surface-mount assembly, while the four-switch configuration consolidates routing functions into one component. Designers should verify the complete logic levels, signal amplitude, channel configuration, and timing requirements in the Renesas ISL83699 datasheet. Care is especially important when a switched node carries signals near the supply limits, when break-before-make behavior matters, or when control inputs remain active during power sequencing. This page organizes the switch function, electrical limits, package details, application guidance, verified specifications, and engineering design considerations. It also distinguishes the IV ordering code from related tube, reel, and QFN packaging options so engineers can select the correct orderable configuration without confusing electrical compatibility with mechanical interchangeability.

RFC Hubungi kami
ISL8391IB - 4-Channel 35Ω SPST Analog Switch | Renesas
ISL8391IB

ISL8391IB - 4-Channel 35Ω SPST Analog Switch | Renesas

The Renesas Electronics ISL8391IB is a low-voltage, single- and dual-supply, quad SPST CMOS analog switch with four independent 1:1 circuits, 35 Ω on-resistance, and a 16-SOIC package. It accepts a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply, making it suitable for low-voltage signal routing. The verified product data identifies low power consumption below 1 µW, leakage current up to 2.5 nA, and fast switching as key application characteristics. An analog switch is an electronically controlled interface that connects or disconnects an analog signal path. The SPST designation means each channel has one pole and one throw, while quad indicates four switching elements in one package. This device sits between sensors, amplifiers, data converters, test equipment, and other signal-chain circuits where a control signal must route a voltage without continuously conducting it. Its CMOS implementation supports low static power and high input impedance. Key features include four independent channels, 35 Ω on-resistance, low leakage, and operation from either single or dual supplies. The single-supply range is +2 V to +12 V, while the dual-supply range is ±2 V to ±6 V. These values allow use in battery-powered equipment and low-voltage instrumentation. The device is identified as a 16-SOIC, surface-mount interface IC. The four-channel architecture reduces the number of discrete switch components required in multiplexed or reconfigurable analog paths. Its low power consumption is useful when battery life is important, while low leakage helps preserve signal amplitude in high-impedance nodes. Fast switching makes the device relevant to measurement, control, and signal-routing systems, although exact switching-time limits and logic thresholds require confirmation from the manufacturer datasheet. Typical applications include battery-powered instrumentation, automated test equipment, data acquisition, sensor interfaces, audio and communications signal routing, and industrial control systems. The ISL8391IB is especially relevant when a designer needs four SPST paths in one 16-SOIC package and can operate the device from a low-voltage single or dual supply. Designers should verify the control-pin polarity, allowable analog signal range, absolute maximum ratings, and switching-time parameters against the manufacturer datasheet before layout. Keep routing short, provide a solid ground reference, and account for the 35 Ω on-resistance when designing source and load impedances. This page combines verified manufacturer-product information, distributor identification, package data, and practical selection guidance. It distinguishes documented values from parameters requiring verification and avoids presenting unreferenced electrical or timing specifications as established facts.

RFC Hubungi kami
ISL8391IB-T - Quad SPST Analog Switch, 35Ω, 16-SOIC
ISL8391IB-T

ISL8391IB-T - Quad SPST Analog Switch, 35Ω, 16-SOIC

Renesas Electronics ISL8391IB-T is a precision quad SPST analog switch with a 1:1 configuration and 35 Ω on-resistance, housed in a 16-pin SOIC package. The device operates from a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply, making it suitable for low-voltage signal routing, battery-powered systems, instrumentation, and communication equipment. Its four independent switches provide selectable connection paths between analog input and output terminals. An analog switch is a semiconductor device that routes low-frequency electrical signals with minimal distortion. The SPST designation means each of the four channels has a single-pole, single-throw configuration, giving it one signal path per switch. As part of the broader interface-IC hierarchy, the ISL8391 combines CMOS switching circuitry, low power consumption, low leakage, and fast switching behavior in a standard surface-mount package. Key characteristics include 35 Ω on-resistance, operation from +2 V to +12 V in single-supply mode, operation from ±2 V to ±6 V in dual-supply mode, and low power consumption of approximately 1 µW in the intended low-power application condition. Maximum leakage current is listed as 2.5 nA. These characteristics help preserve signal integrity when the device handles external measurement, control, or sensor signals rather than high-speed data lanes. The four SPST channels allow a system to connect one source to one destination per channel, making the device useful for sample-and-hold routing, test-point multiplexing, signal isolation, and peripheral selection. Its CMOS implementation supports compact, low-power designs where supply current, off-state leakage, and predictable off-state behavior are important. The 16-pin SOIC footprint supports conventional surface-mount assembly and PCB routing patterns. Typical applications include battery-operated measurement equipment, portable test systems, data-acquisition modules, industrial control interfaces, and low-voltage analog signal conditioning. In these systems, the device can isolate inactive sensors, route a selected source to an amplifier or converter, or protect downstream circuitry by disconnecting external nodes. Supply selection depends on the signal swing and system grounding arrangement. When designing around the ISL8391IB-T, verify signal levels against the permitted input and output voltage ranges, account for 35 Ω on-resistance in the signal-path budget, and use a common ground reference when operating from dual supplies. Place bypass capacitance close to the supply pins and route high-impedance signal traces away from noisy switching nodes. The manufacturer datasheet pin-description table should be used directly when assigning PCB functions. This product overview combines the electrical characteristics, package information, application guidance, replacement considerations, and design notes engineers need when evaluating the ISL8391IB-T for a new analog-routing design. Use the Request a Quote form on this page for current commercial availability, lead time, and sourcing support.

RFC Hubungi kami
ISL8391IBZ - 4-Channel SPST Analog Switch | Renesas
ISL8391IBZ

ISL8391IBZ - 4-Channel SPST Analog Switch | Renesas

The Renesas Electronics ISL8391IBZ is a low-voltage CMOS quad analog switch with four independently controlled SPST channels, a maximum on-resistance of 35 ohms, and a 16-pin SOIC package. It operates from a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply, making it suitable for low-voltage signal-routing systems. An analog switch is an integrated semiconductor that connects or disects analog signal paths under digital control. The ISL8391IBZ belongs to the analog switch and multiplexer hierarchy within interface ICs. Its low-voltage operation, low power consumption, low leakage, and fast switching make it appropriate for battery-powered instrumentation, precision measurement, communications, and test systems where signal integrity must be preserved while control signals remain CMOS-compatible. The device provides four SPST switch functions, 20 ohms typical and 35 ohms maximum on-resistance, and 1 ohm channel-to-channel on-resistance matching. Maximum leakage current is 2.5 nA, while switching times are 60 ns for turn-on and 30 ns for turn-off. Typical power consumption is approximately 1 microwatt, and the input interfaces support TTL- and CMOS-compatible control levels. The ISL8391IBZ can use either one supply rail or positive and negative rails, which allows the same switching architecture to handle unipolar or bipolar signals. Its 1:1 configuration provides straightforward signal isolation without changing the signal level. Minimum 2000 V ESD protection is specified using Method 3015.7, improving handling robustness in systems where exposed connectors and test leads may introduce electrostatic discharge transients. Typical applications include battery-powered data-acquisition equipment, automated test systems, communications equipment, sample-and-hold circuits, and precision signal routing. The 16-pin SOIC package supports conventional surface-mount assembly, while the low leakage and low power characteristics help preserve weak signals and conserve energy in portable systems. When designing a circuit around the ISL8391IBZ, verify the control-logic levels and supply configuration against the manufacturer datasheet. Keep analog traces short, provide a stable supply reference, and account for charge injection and off-state leakage when switching high-impedance or very low-amplitude sources. This product page combines the manufacturer electrical characteristics, package information, pin-compatible alternatives, application guidance, and practical design notes to support faster component selection and board-level implementation.

RFC Hubungi kami
ISL8392IB - 4-Channel 35Ω SPST Analog Switch | Renesas
ISL8392IB

ISL8392IB - 4-Channel 35Ω SPST Analog Switch | Renesas

The Renesas Electronics ISL8392IB is a four-channel, 1:1 SPST CMOS analog switch with a typical on-resistance of 35 Ω, housed in a 16-SOIC package. It supports low-voltage single-supply operation from +2 V to +12 V or dual-supply operation from ±2 V to ±6 V. Four independent switches provide flexible signal routing for precision analog, measurement, test, and battery-powered equipment. An analog switch is a semiconductor-controlled pass element that connects or isolates circuit nodes under digital control. The ISL8392 family belongs to the interface IC hierarchy: analog switch → switch/multiplexer IC → interface integrated circuit. Its SPST configuration provides one conducting path per switch rather than a multi-channel multiplexer, making it useful when each signal requires independent routing. Verified device features include a maximum charge injection of 5 pC, on-resistance matching of 300 mΩ, and crosstalk of -89 dB at 1 MHz. The family data also identifies low power consumption of 1 µW, leakage current up to 2.5 nA, turn-on time of 60 ns, turn-off time of 30 ns, and maximum on-resistance flatness of 4 Ω. These characteristics suit signal paths where fast transitions, low leakage, and controlled charge injection are important. The switch architecture is designed for low-voltage precision routing rather than high-voltage power switching. Signal amplitude, supply range, input capacitance, control-logic levels, and switched leakage must all remain within device limits. Because ISL8392IB is listed as obsolete by GlobalSpec, new production designs should account for lifecycle risk and contact Renesas regarding supported sourcing before committing an active BOM. Typical uses include battery-powered sensor acquisition, multimeter and test-equipment input routing, sample-and-hold systems, data-acquisition modules, and low-power analog signal multiplexing. The 60 ns turn-on and 30 ns turn-off values can limit settling intervals, while 2.5 nA maximum leakage helps preserve weak-source measurements between switching events. Use the 16-SOIC footprint exactly as shown in the manufacturer pinout, and observe all control pins during unused channels. Do not infer the complete pin map or absolute maximum ratings from distributor snippets alone. Validate signal integrity, supply sequencing, and injected charge in the final analog channel because package parasitics and PCB capacitance can materially affect precision measurements. This page consolidates verified lifecycle, electrical, package, cross-reference, and sourcing information with engineering guidance that extends beyond a distributor listing. It also clearly separates confirmed data from parameters that still require datasheet or internal-inventory confirmation.

RFC Hubungi kami
ISL8392IB-T - 4-Channel SPST Analog Switch | Renesas
ISL8392IB-T

ISL8392IB-T - 4-Channel SPST Analog Switch | Renesas

The Renesas Electronics ISL8392IB-T is a CMOS quad analog switch with four independent single-pole single-throw channels in a 16-SOIC package. Each channel provides a 1:1 signal configuration, operates from a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply, and has a maximum specified on-resistance of 35 ohms. The device is optimized for low-power signal routing in battery-powered and space-constrained equipment. An analog switch is an integrated semiconductor that routes electrical signals between circuit nodes under digital control. The ISL8392IB-T belongs to the analog switch, multiplexer and demultiplexer hierarchy, where it functions as four independent SPST switches. Compared with mechanical relays, it can switch faster, consume less power, and occupy less circuit-board area. Unlike a multiplexer that combines several inputs onto one output, its 1:1 configuration preserves a separate signal path for every channel. Low power consumption is a principal feature of the ISL8392IB-T. The manufacturer specifies approximately 1 µW power consumption for battery-powered applications, with maximum leakage current of 2.5 nA. This low leakage helps preserve battery capacity when a switched node is inactive. The four switch channels also provide on-resistance flatness of up to 4 ohms, helping maintain consistent signal behavior across the operating range. Fast switching makes the part suitable for time-sensitive signal paths. The specified turn-on time is 60 ns and turn-off time is 30 ns. These values are especially useful when the device selects between sensors, measurement channels, communication paths, or test points under digital control. Because analog switches conduct rather than regenerate signals, input bandwidth, on-resistance, capacitance, leakage, and off-state isolation remain important system-level considerations. Typical uses include battery-powered instrumentation, portable measurement equipment, automated test systems, sample-and-hold front ends, sensor selection circuits, and communication routing. The device can operate from a single supply for low-voltage systems or from dual supplies when bipolar signals must be switched. Its 16-SOIC package supports conventional surface-mount assembly while providing four independently controlled switches in a modest board area. A practical design should verify the signal amplitude against the selected supply configuration, place decoupling capacitance close to the supply pins, and keep high-speed routes short to minimize parasitic capacitance. Control inputs should be driven only with levels compatible with the operating supply. Check the datasheet pin-description and switching tables before assigning control states or routing a signal through an inactive channel.

RFC Hubungi kami
ISL8392IBZ - Quad SPST Analog Switch | Renesas Electronics
ISL8392IBZ

ISL8392IBZ - Quad SPST Analog Switch | Renesas Electronics

Renesas Electronics ISL8392IBZ is a low-voltage CMOS analog switch containing four independent single-pole single-throw channels in a 16-SOIC package. Designed for single-supply operation from +2 V to +12 V, it also supports dual-supply operation from ±2 V to ±6 V. Key switching characteristics include 60 ns tON, 30 ns tOFF, 2.5 nA maximum leakage current, and 4 Ω maximum on-resistance flatness. These characteristics make the device suitable for routing low-voltage analog signals where low power consumption, fast transitions, and compact implementation are important. An analog switch is an integrated semiconductor device that connects or disconnects an analog signal path under digital control. The ISL8392IBZ belongs to the broader hierarchy of analog switches, multiplexers, interface ICs, and signal-routing semiconductors. Unlike a mechanical relay, it can operate rapidly with low control power and without mechanical contact wear. Its four SPST channels can route signals independently, making the device useful in battery-powered instrumentation, test systems, sample-and-hold circuits, and peripheral-selection networks. The switch's CMOS construction supports low power consumption of approximately 1 µW and maximum leakage of 2.5 nA. Fast 60 ns turn-on and 30 ns turn-off times reduce the dead time when changing signal paths. Maximum on-resistance flatness of 4 Ω helps limit gain or timing variation across the operating voltage range. The single- and dual-supply flexibility also allows the same device to be used in grounded positive-rail systems or bipolar-style signal environments, subject to the absolute maximum ratings and logic-level requirements in the datasheet. The ISL8392 family uses CMOS circuitry to achieve low on-state resistance and low off-state leakage. Its four channels are designed for precision signal routing, where the control inputs determine whether each common terminal is connected to its corresponding input. Because an analog switch can introduce resistance, capacitance, charge injection, and off-state leakage into a signal path, the application must account for source impedance, settling time, control timing, and the voltage range applied to each terminal. Typical uses include battery-powered test equipment, automated measurement systems, signal multiplexing, audio path routing, data acquisition modules, and industrial control circuits. The device is particularly useful when several low-level signals must be selected electronically without using multiple discrete relay packages. For dual-rail designs, the ±2 V to ±6 V operating range provides compatibility with bipolar analog signals, while single-supply designs support systems operating between +2 V and +12 V. Design the input and control pins so that every voltage remains within the limits specified by the manufacturer datasheet. Keep sensitive signal traces short, provide a stable return path, and account for control-pin timing when the selected channel must settle before measurement. The 16-SOIC package supports conventional surface-mount assembly, but pin-compatible substitution still requires verification of electrical limits, logic thresholds, control polarity, and switching behavior. This product page combines the manufacturer specifications, package information, functional guidance, comparison criteria, and design considerations needed to evaluate the ISL8392IBZ. It also distinguishes verified same-family options from unsupported substitutes, helping engineers make a replacement decision without assuming that similar switch counts or package names guarantee pin-to-pin compatibility.

RFC Hubungi kami
ISL8393IB - 4-Channel SPST Analog Switch | Renesas
ISL8393IB

ISL8393IB - 4-Channel SPST Analog Switch | Renesas

Renesas Electronics ISL8393IB is a low-voltage, precision quad SPST analog switch with four independently controlled channels, low on-resistance, low leakage, and fast switching. It operates from a single +2 V to +12 V supply or from a dual ±2 V to ±6 V supply. The device is supplied in a 16-pin SOIC package, and the family specification identifies 35 ohm maximum on-resistance, 1 micro watt power consumption, 2.5 nA maximum low leakage, 60 ns typical turn-on time, and 30 ns typical turn-off time. An analog switch is an electronic routing component that connects or disconnects analog signals under digital control. A single-pole single-throw, or SPST, switch provides one controlled signal path. The ISL8393 combines four such paths in one package, making it useful for signal routing, test and measurement systems, data acquisition equipment, battery-powered instruments, and communication equipment. In the component hierarchy, it is an analog switch, also described as a CMOS analog switch or interface IC. The four separately controlled channels provide independent signal-path selection. The Renesas family page identifies pin-compatible replacements for the Maxim MAX391 through MAX393 family and for the DG411, DG412, and DG413 families. Its low 1 micro watt power consumption is particularly valuable in battery-operated equipment, while the 2.5 nA maximum leakage specification helps preserve sensor and measurement accuracy when a channel is disconnected. Switching performance is optimized for short transition intervals: the family specification lists 60 ns typical turn-on time and 30 ns typical turn-off time. The 35 ohm maximum on-resistance is suitable for general low-voltage signal-routing applications where resistance variation and leakage are more important than very low ohmic values. A 1 ohm channel-to-channel resistance-matching specification helps preserve balance between channels in matched systems. Typical uses include battery-powered test equipment, portable measurement systems, communication equipment, and analog signal multiplexing arrangements. The wide single- and dual-supply ranges allow the same device family to operate from low single-cell or dual-rail systems. Control signals should be compatible with the selected supply configuration, and unused control or signal pins must follow the manufacturer datasheet guidance. The principal design trade-off is on-resistance versus power and leakage performance. The ISL8393 prioritizes low power, low leakage, compact integration, and fast switching rather than ultra-low resistance. Designers should verify signal amplitude, bandwidth, charge injection, off isolation, and supply compatibility against the manufacturer datasheet before finalizing a high-precision application. This page consolidates verified family specifications, manufacturer-supported pin-compatible references, procurement data, comparison parameters, and practical engineering guidance. It distinguishes documented values from parameters that require confirmation from the full datasheet, providing a practical starting point for schematic capture, footprint selection, and replacement planning.

RFC Hubungi kami
ISL8393IB-T - Quad SPST Analog Switch | Renesas
ISL8393IB-T

ISL8393IB-T - Quad SPST Analog Switch | Renesas

Renesas Electronics ISL8393IB-T is a CMOS precision quad analog switch containing four independent single-pole single-throw channels, with a 1:1 signal configuration, 35 ohm on-resistance, and a 16-lead SOIC package. The device operates from a single +2 V to +12 V supply or from dual ±2 V to ±6 V supplies. An analog switch is an integrated circuit that routes low-frequency analog or digital signals between circuit nodes under digital control. The ISL8393IB-T belongs to the analog-switch and multiplexer hierarchy, where it sits between sensors, test points, amplifiers, converters, and system controllers. Its four SPST channels can isolate test paths, select signal sources, route instrumentation, or implement compact switching networks without using discrete mechanical relays. Key characteristics include 1 microwatt low-power operation, maximum leakage current of 2.5 nA, and a 35 ohm on-resistance. Single-supply operation simplifies systems that only provide one positive rail, while dual-supply operation allows symmetric signal routing around ground. The 1:1 configuration indicates that each channel provides direct signal connectivity rather than converting signal polarity or multiplexing unequal impedance networks. The ISL8393 series uses CMOS circuitry to provide low power consumption and low leakage. These characteristics suit battery-powered equipment, portable measurement systems, automated test equipment, and control systems where switched nodes should not draw substantial standby current. Maximum leakage of 2.5 nA helps preserve high-impedance sensor signals when a channel is disconnected, although exact signal integrity and switching-time limits should be confirmed from the manufacturer datasheet before high-speed or precision impedance designs are released. Typical applications include battery-powered sensor acquisition, automated test equipment, analog signal isolation, sample-and-hold subsystems, and instrumentation routed by a microcontroller or other digital controller. A single-supply implementation can use the IC directly from a +2 V to +12 V rail, while a ±5 V system provides headroom for bipolar signals when the device is operated within the specified ±2 V to ±6 V range. Layout should keep the analog signal traces short and provide a solid ground reference. The unused control inputs must be driven to defined logic levels so that no switch remains partially on, while supply bypassing should be placed close to the device. Signal traces should avoid routing alongside noisy switching or digital return paths, especially where the selected channel drives a high-impedance sensor. This page combines the manufacturer family specifications, package information, sourcing context, replacement analysis, comparison tables, and application guidance into one engineering-oriented reference for evaluating the ISL8393IB-T.

RFC Hubungi kami
ISL8394IB - Quad SPDT Analog Switch | Renesas Electronics
ISL8394IB

ISL8394IB - Quad SPDT Analog Switch | Renesas Electronics

Renesas Electronics ISL8394IB is a precision quad SPDT analog switch with four independently controlled switches, a 35 ohm maximum on-resistance, and a 20-pin SOIC package. It operates from a single +2V to +12V supply or from a ±2V to ±6V dual supply. Typical on-resistance is 17 ohms, while on-resistance matching between channels is 1 ohm. The device supports TTL- and CMOS-compatible control signals. An analog switch is an integrated semiconductor that routes analog signals between circuit nodes under digital control. The ISL8394 belongs to the analog-switch and multiplexer hierarchy, where an SPDT switch selects one of two signal paths per common terminal. Four separately controlled SPDT circuits provide flexible signal routing for test, measurement, communication, and battery-powered equipment. This makes the ISL8394 more useful than a single fixed multiplexer when several independent connections must be switched. Key performance characteristics include fast transition times of 50 ns for turn-on and 30 ns for turn-off. Charge injection is limited to 10 pC, helping control timing errors when the device switches low-level or high-impedance signals. Maximum leakage current at 85°C is 2.5 nA, and typical power consumption is 5 microwatts. The manufacturer also specifies a maximum on-resistance flatness of 4 ohms, providing more consistent channel resistance across the operating signal range. The device accepts single or dual power rails, which supports both conventional positive-supply designs and bipolar signal paths. Each SPDT switch has a separate control input, allowing independent routing decisions. Break-before-make operation is guaranteed, while minimum 2,000 V ESD protection per Method 3015.7 improves robustness against electrostatic discharge encountered during handling or testing. Typical uses include battery-powered instrumentation, signal-path multiplexing, automated test equipment, communication interfaces, and portable measurement systems. The low 5 microwatt power consumption and 2.5 nA maximum leakage are especially useful when preserving battery life or measuring high-impedance sources. The 20-SOIC package also supports conventional surface-mount assembly methods. Designers should account for the 35 ohm maximum on-resistance, 10 pC maximum charge injection, and control-signal timing when selecting capacitors, amplifiers, or downstream circuits. Designers should also verify the exact pin functions, supply sequence, and operating limits against the manufacturer datasheet before layout because the public web data provided for this page does not include a complete pin table. This page consolidates the verified manufacturer and distributor data for the ISL8394IB, adds application-focused engineering context, and distinguishes verified drop-in references from package or sourcing variants that should not be treated as PCB drop-in replacements.

RFC Hubungi kami
ISL8394IB-T - Quad SPDT Analog Switch, 20-SOIC | Renesas
ISL8394IB-T

ISL8394IB-T - Quad SPDT Analog Switch, 20-SOIC | Renesas

Renesas ISL8394IB-T is a precision, quad SPDT analog switch with four independently controlled 2:1 switch circuits, 17 ohm typical on-resistance, 35 ohm maximum on-resistance, and a 20-pin SOIC package. It supports single-supply operation from +2 V to +12 V and dual-supply operation from ±2 V to ±6 V. An analog switch is a semiconductor interface that routes signals between input and output terminals under digital control. The quad SPDT architecture places four independent single-pole, double-throw switches in one package, making the ISL8394IB-T suitable for signal-routing, sampling, test, measurement, and communication systems. Its wider supply range allows the same design to operate from low-voltage battery rails or split analog supplies. Key electrical characteristics include 1 ohm maximum on-resistance matching between channels, 10 pC maximum charge injection, 5 microwatt power consumption, and 2.5 nA maximum leakage current at 85 degrees Celsius. The switching times are 50 ns maximum turn-on and 30 ns maximum turn-off, while guaranteed break-before-make operation helps prevent incorrect path overlap during transitions. The device also provides 2000 V ESD protection using Method 3015.7 and is compatible with TTL and CMOS control signals. These characteristics make it especially useful when a system must switch low-level analog signals without introducing substantial resistance imbalance, charge disturbance, or excessive supply power. The manufacturer identifies the ISL8394 family as a drop-in replacement for the MAX394 family of four separately controlled SPDT switches. Typical uses include battery-powered instrumentation, multimeter and test-equipment input routing, data-acquisition systems, sample-and-hold networks, and communication interfaces. In a dual-supply analog circuit, the negative supply allows bipolar signals to be switched without shifting their reference level. In single-supply systems, the device simplifies designs that require multiple routed signal paths under microcontroller or logic-controller control. Designers should verify signal amplitude, control-logic levels, supply sequencing, and the maximum switched voltage before finalizing a board layout. Keep high-impedance traces short, provide a stable return path, and place the device so switching transients do not couple into sensitive analog nodes. Its low power consumption and low leakage are valuable in battery-operated equipment, although ESD protection and signal-path isolation remain essential in exposed applications. This product page combines the ISL8394 family electrical characteristics, supply limits, package information, and switching specifications with application guidance, comparison parameters, and practical design notes. It also distinguishes verified drop-in options from generic cross-reference results, helping engineers evaluate PCB compatibility without confusing a similar part with a guaranteed pin-to-pin replacement.

RFC Hubungi kami
ISL8394IBZ - 4-Channel SPDT Analog Switch | Renesas Electronics
ISL8394IBZ

ISL8394IBZ - 4-Channel SPDT Analog Switch | Renesas Electronics

The Renesas Electronics ISL8394IBZ is a precision quad SPDT analog switch designed for low-voltage, single-supply or dual-supply signal-routing systems. It provides four independently controlled switches, a 2:1 multiplexing configuration, 35 ohm on-resistance in the manufacturer listing, and a 20-pin SOIC package. The device is intended for applications requiring low power consumption, low leakage current, and fast switching performance. An analog switch is a semiconductor interface that routes analog or digital signals between circuit nodes under digital control. The ISL8394 belongs to the broader analog switch and multiplexer hierarchy, which includes SPDT switches, multiplexers, demultiplexers, and interface ICs used in test, measurement, communications, and instrumentation systems. Its quad SPDT arrangement allows one source signal to be connected to either of two destinations for each channel, or two sources to be routed to a common output, depending on the application configuration. According to the manufacturer datasheet, the ISL8394 operates from a single +2 V to +12 V supply or from a dual supply of +/−2 V to +/−6 V. The device is specified for low power consumption of 5 microwatts, maximum leakage current of 2.5 nA, and fast switching speeds. The supplied product information identifies the device as a 4-circuit, 2:1 analog switch with 35 ohm on-resistance in a 20-SOIC package. These characteristics suit battery-powered equipment and precision measurement circuits where signal integrity and low standby current are important. Typical uses include battery-powered test equipment, data-acquisition systems, audio and communication signal routing, instrumentation interfaces, and compact embedded measurement products. In a two-channel routing arrangement, control logic can select one of two analog inputs for connection to a shared signal-processing block while the other inputs remain electrically isolated. Designers should pay close attention to the control logic levels, supply sequencing, input voltage range, and signal amplitude at each switched node. The low-leakage and low-power characteristics make the ISL8394 useful in battery-powered systems, but the PCB should minimize parasitic capacitance around high-impedance nodes and provide clean return paths for control and supply pins. This page combines the manufacturer datasheet details, distributor identification, package information, and practical design guidance to support component selection, replacement planning, and PCB implementation. It also distinguishes the core ISL8394 function from nearby comparator and multiplexer families, helping engineers determine when the quad SPDT architecture is the correct switching choice.

RFC Hubungi kami
ISL84051IB - 8:1 100Ω Analog Multiplexer | Renesas
ISL84051IB

ISL84051IB - 8:1 100Ω Analog Multiplexer | Renesas

The Renesas Electronics ISL84051IB is a low-voltage analog multiplexer with an 8:1 configuration, 100 ohm on-resistance, and a 16-pin SOIC package. It operates from a single +2 V to +12 V supply or from dual supplies, allowing it to support both low-voltage portable systems and conventional positive and negative analog rails. The device provides TTL and CMOS-compatible control inputs and an inhibit function for opening all signal paths. An analog multiplexer is an interface IC that connects one of several input channels to a shared output path. It belongs to the broader analog switch and signal-routing hierarchy, which sits within interface semiconductors and embedded control systems. Multiplexers reduce the number of physical connections required by sensors, test equipment, data acquisition systems, and communication equipment while allowing one converter or processor input to monitor multiple signals. The ISL84051IB's principal benefits include its 8:1 channel ratio, maximum on-resistance of 100 ohm at ±5 V, low-voltage operation, and pin compatibility with established multiplexers. The inhibit pin simplifies system control because all signal paths can be disconnected simultaneously. TTL and CMOS-compatible address and select inputs also support a broad range of digital control circuits without requiring elevated input levels. Internally, the device uses controlled analog switches to route one selected input to the common output. Its on-resistance matching between channels keeps similar resistance characteristics across the selected paths, helping preserve signal amplitude consistency. Because it is a passive switch rather than an active amplifier, it introduces insertion loss determined principally by on-resistance and does not provide gain or level shifting. Typical applications include battery-powered instrumentation, automated test equipment, data acquisition, communication routing, sample-and-hold systems, and microcontroller-based sensor interfaces. The low +2 V minimum supply is useful for portable equipment, while dual-supply operation is valuable when signals can be bipolar. The 16-pin SOIC package also supports conventional surface-mount assembly and board-level manual inspection. Designers should verify signal amplitude, bandwidth, injection charge, off leakage, and the complete logic truth table against the manufacturer datasheet. Keep high-impedance routing paths short, provide a stable ground reference, and account for the resistance of PCB traces when precision measurements depend on total path resistance. This page combines the manufacturer device description with a focused engineering comparison, replacement guidance, pin-level sourcing information, and practical application guidance for engineers evaluating the ISL84051IB in multiplexed analog signal paths.

RFC Hubungi kami
ISL84052IA - Dual 4:1 Analog Multiplexer | Renesas
ISL84052IA

ISL84052IA - Dual 4:1 Analog Multiplexer | Renesas

The Renesas ISL84052IA is a low-voltage analog multiplexer containing two independent 4:1 single-pole, double-throw switches, with the device presented in a 16-pin QSOP package. It supports single-supply operation from 2 V to 12 V and dual-supply operation from 0.3 V to 15 V, according to the Intersil datasheet and Renesas product page. Its typical on-resistance is 100 ohms, while the maximum on-resistance is 225 ohms with a positive 5 V supply. These specifications make it suitable for routing low-frequency analog signals in test, measurement, communication, and instrumentation systems. An analog multiplexer is an interface IC that connects multiple signal paths to a shared output through controlled switches. The ISL84052IA belongs to the analog switch and multiplexer hierarchy, within interface ICs and discrete semiconductor switching systems. Its dual 4:1 organization allows two independent channels to be selected by digital control logic, reducing the number of external routing components in systems with multiple sensors, test points, or measurement channels. The low-voltage capability also supports modern mixed-signal equipment operating from reduced supply rails. Key electrical features include 100-ohm on-resistance, 225-ohm maximum on-resistance at a positive 5 V supply, less than 6-ohm on-resistance matching between channels, and 2 pC charge injection. The device is described as having low-voltage, single and dual supply operation, TTL/CMOS-compatible inputs, and a maximum signal current rating of 30 mA. The Renesas product page identifies compatibility with MAX4051, MAX4052, MAX4053, MAX4581, MAX4582, MAX4583, 74HC4051, 74HC4052, and 74HC4053 families. The two independent switches make the ISL84052IA useful in instrumentation where several inputs must be routed to separate measurement channels. It can also be used in battery-powered test equipment, signal-conditioning boards, automated test equipment, and communication interfaces where supply voltage and board area are constrained. The digital select inputs allow the multiplexing function to be coordinated by a microcontroller or system logic. The main design consideration is ensuring that the selected signal amplitude, supply polarity, and control levels remain within the device's operating limits. Input and output filtering may be needed when switch transitions produce transient charge injection. The QSOP package also requires adequate spacing between adjacent high-impedance nodes to reduce leakage and coupling. For replacement decisions, compare the exact pin arrangement and supply configuration rather than relying only on the multiplexer description. This page combines the manufacturer product-page characteristics, datasheet parameters, package information, application guidance, and drop-in comparison considerations for engineers evaluating the ISL84052IA. It provides practical selection context beyond a basic distributor listing.

RFC Hubungi kami
ISL84467IRTZ - Quad SPDT Analog Switch, 0.39Ω rON, 1.65-4.5V | Renesas
ISL84467IRTZ

ISL84467IRTZ - Quad SPDT Analog Switch, 0.39Ω rON, 1.65-4.5V | Renesas

The Renesas (formerly Intersil) ISL84467IRTZ is an ultra-low ON-resistance, low-voltage, bidirectional Quad SPDT (Dual DPDT) analog switch housed in a 16-pin TQFN (3x3 mm) package. The device operates from a single +1.65V to +4.5V supply, delivers a typical ON resistance of 0.39Ω, and supports switching speeds of tON = 33ns and tOFF = 16ns. The 1.8V logic-compatible digital inputs allow direct interfacing with modern low-voltage microcontrollers without level shifters, making the part attractive for portable and battery-powered designs where both signal integrity and low quiescent drain matter. An analog switch (also called an analog multiplexer or bilateral switch) is a solid-state device that uses MOSFET transistors to route analog or digital signals between input and output pins under digital control. Quad SPDT (Single Pole Double Throw) means the device contains four independent 2:1 switches, each capable of selecting between two signal paths. Compared to electromechanical relays, analog switches offer far faster switching, no contact bounce, lower power, and indefinite mechanical life, but they have limited voltage handling and finite OFF isolation. Key features of the ISL84467IRTZ include 0.39Ω typical rON (which minimizes signal attenuation and distortion for low-level audio or precision analog signals), 1.8V logic-compatible inputs across the full supply range, break-before-make switching action to prevent momentary shorts between adjacent channels, and ESD protection on the logic and signal pins. The bidirectional signal path means each switch can carry signals in either direction with identical AC performance, simplifying PCB routing when source and destination roles are not predetermined. The four SPDT switches are organized as two DPDT (Double Pole Double Throw) pairs that switch in tandem, useful for differential signal routing in audio, USB, or data-acquisition front ends. The TQFN-16 package with an exposed pad provides low thermal resistance and a small 3x3 mm footprint, suitable for high-density handheld equipment. Targeted applications per the manufacturer datasheet include battery-powered portable instruments, audio/video signal routing, mobile handsets, and handheld test equipment. When designing with the ISL84467IRTZ, observe the absolute maximum signal voltage (typically equal to V+ plus ESD diode drops) and place decoupling capacitors close to the V+ pin. For low-distortion audio applications, the low rON and low charge injection of this switch help preserve signal fidelity; designers should still account for switch capacitance in bandwidth-limited paths. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
ISL84516IB - Low-Voltage Dual-Supply SPST Switch | Renesas
ISL84516IB

ISL84516IB - Low-Voltage Dual-Supply SPST Switch | Renesas

The Renesas ISL84516IB is a low-voltage, dual-supply, single-pole single-throw analog switch with a 1:1 signal configuration, 20 ohm on-resistance and an 8-SOIC package. It is designed to operate from positive and negative supplies spanning ±1.5 V to ±6 V, making it suitable for precision analog signal-routing systems operating from low-voltage battery rails. Its stated low power consumption of 350 mW supports energy-conscious portable equipment. An analog switch is a semiconductor device that routes signals between circuit nodes under digital control. The SPST designation identifies one independently selectable path, while the 1:1 configuration indicates a single signal path for each switch function. Within the broader hierarchy, the ISL84516IB is an analog switch, a discrete analog interface function, and ultimately an integrated circuit used for signal routing rather than voltage conversion. The key benefits of the ISL84516IB include dual-supply operation from ±1.5 V to ±6 V, a specified 20 ohm on-resistance and low power consumption of 350 mW. The device family is described as a precision analog switch with excellent on-resistance flatness, making it useful when the resistance contribution of the switch must remain relatively consistent across the selected signal range. Low leakage current is another stated family characteristic relevant to battery-powered and high-impedance circuits. The ISL84516IB belongs to the ISL84516 and ISL84517 precision analog-switch family. The ISL84516 variant provides a 1:1 switching arrangement, while the companion ISL84517 provides a different switch arrangement within the same low-voltage, dual-supply family. The IB ordering designation identifies the specific catalog configuration offered in the 8-SOIC package. Because this part operates from bipolar rails, its application circuitry must keep every driven terminal within the permitted supply range. Typical applications include battery-powered portable instruments, low-voltage data-acquisition systems, precision analog test equipment and small-signal routing networks. The device can be paired with an ISL84516IB or ISL84517-family member where separate routing paths or complementary switching functions are required. Its low-voltage range is especially relevant to systems powered from single-cell lithium-ion batteries and rail-to-rail signal chains. The primary design consideration is ensuring that the switch-control logic and analog signal amplitudes remain compatible with the dual supply rails. Layout should minimize parasitic capacitance around the signal pins and keep return-current paths short. Designers should also verify the on-resistance contribution against the source and destination input impedances before using the switch in precision attenuation or measurement paths. This page combines the device's catalog identity, operating limits, package information and application guidance with practical routing considerations. It also identifies the limitation of the available substitution information: confirmed pin-to-pin alternatives require verification against the Renesas pin description and electrical characteristics before they can be treated as drop-in replacements.

RFC Hubungi kami
ISL84521IB - 100Ω Quad SPST Analog Switch | Renesas
ISL84521IB

ISL84521IB - 100Ω Quad SPST Analog Switch | Renesas

The Renesas Electronics ISL84521IB is a low-voltage CMOS analog switch IC containing four independently controlled single-pole single-throw switches, with a maximum on-resistance of 100Ω and operation from single or dual supplies. The device is offered in a 16-pin SOIC package and is designed for low-power signal-routing applications. An analog switch is an integrated interface circuit that connects or disconnects a signal path under digital control. A single-pole single-throw switch provides one independently selectable route, while a quad analog switch combines four such switches in one IC. The ISL84521 belongs to the analog-switch, interface-IC, and semiconductor hierarchy and can serve as a low-voltage multiplexing or sampling element in test, measurement, communication, and industrial control systems. Key features include four separately controlled SPST switches, a 100Ω maximum on-resistance, channel matching of 1Ω, 1µW low power consumption, and 10nA maximum leakage current at 85°C. Switching timing is specified as 45ns typical turn-on and 15ns typical turn-off, while break-before-make operation helps prevent undesirable current paths during transitions. The ISL84521 supports single-supply operation from 3V to 12V and dual-supply operation from ±3V to ±6V. Its CMOS implementation supports TTL-compatible control inputs and low power consumption. Four independent controls allow separate signals to be routed without requiring multiple single-switch packages, reducing board area in multi-channel analog systems. Typical uses include battery-powered test equipment, programmable signal conditioning, communication-interface routing, industrial control modules, and precision measurement systems. The low 15ns typical turn-off time is useful when the application requires rapid isolation or discharge paths, while the 100Ω maximum on-resistance should be considered in high-impedance analog nodes. For layout, place each switched signal trace close to its assigned switch pin and keep control traces away from sensitive analog paths. Confirm input and output voltage limits against the selected supply configuration. Account for the 100Ω maximum channel resistance, 1Ω matching specification, and leakage when calculating circuit errors. This page combines manufacturer specifications, package details, application guidance, and a focused replacement analysis. It also identifies the limits of drop-in substitution by separating same-footprint options from parts requiring a different package, helping engineers shorten sourcing and design-review time.

RFC Hubungi kami
ISL84523IV - 4-Channel SPST Analog Switch | Renesas Electronics
ISL84523IV

ISL84523IV - 4-Channel SPST Analog Switch | Renesas Electronics

Renesas Electronics ISL84523IV is a low-voltage CMOS quad analog switch with four independently controlled SPST channels, 100 ohm maximum on-resistance, and a 16-pin TSSOP package. It operates from a single +2 V to +12 V supply or from a split ±2 V to ±6 V supply, making it suitable for low-voltage signal routing in battery-powered and precision test systems. An analog switch is a semiconductor interface device that connects or isolates analog signals under digital control. Its function in the broader hierarchy is analog switch → multiplexer or demultiplexer → interface IC. The ISL84523IV uses four separate SPST paths rather than a shared multiplexer bus, allowing four signals to be routed independently while keeping the control logic separate from the analog nodes. Key characteristics include a maximum on-resistance of 100 ohm, on-resistance matching between channels of 1 ohm, low power consumption below 1 microwatt, and maximum leakage current of 1 nA in the principal operating description. Switching times are listed as 45 ns on and 15 ns off. The manufacturer also identifies TTL and CMOS control compatibility, a minimum 2000 V ESD protection rating using Method 3015.7, and break-before-make timing of at least 2000 ns. The ISL84523IV family is designed for precision low-voltage signal switching. Separate control inputs permit each SPST switch to be commanded independently, while low leakage and low power consumption help preserve small signals in battery-operated measurement equipment. Its stated pin compatibility with DG411, DG412, and DG413 devices supports reuse of existing routed analog-switch layouts when control behavior and application requirements are compatible. Typical uses include battery-powered test equipment, automated measurement systems, signal-isolation networks, sample-and-hold circuitry, and low-voltage analog front ends. The device is also identified as a drop-in replacement for MAX4521, MAX4522, and MAX4523 devices. Because it supports both single-supply and dual-supply operation, it can address dual-rail instrumentation as well as systems whose analog signals remain above ground. For new layouts, route each analog switch terminal to the intended signal path and keep control traces away from sensitive analog nodes. Confirm the complete pin map and control truth table in the manufacturer datasheet before making substitutions. The 16-pin TSSOP footprint supports compact density, but exposed copper and careful grounding remain important for preserving low-level signal integrity. This page combines the manufacturer’s electrical and switching characteristics with practical routing guidance, drop-in cross-reference options, and a parameter-by-package comparison. It is intended to help engineers identify whether the ISL84523IV fits the required voltage range, control interface, switching behavior, and board footprint before requesting a quote.

RFC Hubungi kami
ISL84541IB - Dual SPST Analog Switch, 2.7-12V | Renesas
ISL84541IB

ISL84541IB - Dual SPST Analog Switch, 2.7-12V | Renesas

Renesas ISL84541IB is a precision dual analog switch built as two independent SPST circuits in an 8-SOIC package. The device operates from a single +2.7 V to +12 V supply, offers a typical on resistance of 30 Ω, and supports both normally open and normally closed signal paths. Its 35 ns typical turn-on time, 25 ns typical turn-off time, and maximum 5 pC charge injection make it suitable for low-voltage analog routing. An analog switch is a semiconductor interface device that connects or disconnects signals under digital control while preserving the analog signal rather than converting it to a digital representation. The ISL84541 belongs to the analog-switch hierarchy within interface ICs and is controlled by CMOS-compatible logic inputs. It is intended to route low-voltage signals while limiting insertion loss, switching transients, and power consumption in portable and precision equipment. Key characteristics include low power consumption below 5 µW, leakage current down to 100 pA maximum, and on-resistance matching between channels below 1 Ω. The manufacturer identifies the device as fully specified at 3.3 V and 5 V supplies. These attributes are valuable in battery-powered equipment, where both leakage and switching charge influence battery life, and in measurement paths where predictable channel resistance is important. The ISL84541 uses complementary SPST switches to provide independent routing in both directions. Its low charge injection limits the voltage disturbance created when control inputs change state, while fast switching reduces control-to-signal delay. The single-supply architecture simplifies system power design, and the low-leakage implementation helps preserve high-impedance sensor and sampling nodes between switch transitions. Typical uses include mobile-device signal routing, battery-powered instruments, audio and communication interfaces, test and measurement systems, and low-voltage analog acquisition circuits. Renesas also identifies the ISL84541 as a drop-in replacement for selected MAX4541-series and DG9461/DG9262-series devices, providing a practical basis for second-source and legacy-design migration. Designers should account for the external drive and ground relationship of the logic inputs, preserve the specified supply range, and connect unused control inputs to a defined logic level. Signal-path layout should minimize parasitic capacitance because switch transitions can inject charge into high-impedance nodes. PCB signal integrity should also be checked across the complete voltage and frequency range used by the selected analog source. This page combines the manufacturer function description, exact device identifiers, drop-in cross references, and practical application guidance to support component selection and PCB-level replacement decisions without relying on generic analog-switch descriptions.

RFC Hubungi kami
ISL84541IU - Dual SPST 12V 60Ω Analog Switch | Renesas
ISL84541IU

ISL84541IU - Dual SPST 12V 60Ω Analog Switch | Renesas

The Renesas Electronics ISL84541IU is a dual SPST analog switch designed for low-voltage, single-supply operation. The device provides two independently controlled analog switches, a 60 Ω on-resistance specification, and an operating supply range of +2.7 V to +12 V in an 8-MSOP package. It is suited to battery-powered and portable equipment where signal routing must remain compatible with low supply voltages. An analog switch is a semiconductor device that connects or disconnects analog signal paths under digital control. The ISL84541 family belongs to the analog switch and multiplexer hierarchy, which sits within interface ICs and broader signal-conditioning systems. Unlike a mechanical relay, an analog switch changes electrical connections much faster and can route low-level signals without physically moving conductive contacts. The ISL84541IU combines this switching function with low-power operation and supply flexibility. Key family features include on-resistance matching below 1 Ω between channels, maximum charge injection of 5 pC, power consumption below 5 µW, and maximum leakage current of 10 nA at 85°C. The devices are fully characterized at 3.3 V and 5 V supplies, which makes their behavior predictable in common portable and embedded rails. A Pb-free option is also available within the ISL84541 family. The dual-SPST configuration gives each switch one normally closed and one normally closed terminal pair in its SPDT implementation, allowing a signal to be routed to or away from the common terminal. The low charge injection helps limit transient disturbances when the control state changes, while matched on-resistance helps reduce gain or timing differences between channels. These characteristics are important when the same source feeds multiple downstream paths. Typical uses include battery-powered test equipment, portable measurement systems, audio and communication-signal routing, automated test equipment, and low-voltage data-acquisition equipment. The +2.7 V minimum supply supports systems powered from two alkaline cells, while the +12 V maximum provides additional range for industrial and instrumentation designs. The 8-MSOP package also supports compact board layouts when adequate assembly and inspection controls are used. A primary design consideration is ensuring that the control voltage and analog signal levels remain within the device's operating limits. Place bypass capacitance close to the supply pin, keep switched traces short, and route sensitive inputs away from switching-control and clock traces. Also verify the switch configuration in the pin-description table before assigning PCB nets, because the family includes several SPST and SPDT arrangements. This product page combines the exact ISL84541IU catalog attributes with family-level technical information, drop-in compatibility findings, and practical guidance for low-voltage analog routing. It is intended to help engineers compare the device against documented equivalents, plan PCB changes, and select an appropriate replacement without conflating packaging suffixes with electrically distinct alternatives.

RFC Hubungi kami
ISL84543CB - Dual SPST Analog Switch, 60 Ohm, 8-SOIC | Renesas
ISL84543CB

ISL84543CB - Dual SPST Analog Switch, 60 Ohm, 8-SOIC | Renesas

Renesas Electronics ISL84543CB is a dual, single-pole single-throw analog switch with a 1:1 signal configuration, 60 ohm on-resistance, and an 8-pin SOIC package. Designed for single-supply operation, the device accepts a +2.7 V to +12 V supply and is characterized at 3.3 V and 5 V, making it suitable for low-voltage analog routing in battery-powered and portable equipment. An analog switch is a semiconductor interface that connects or disconnects signal paths under digital control. The ISL84543CB belongs to the analog-switch hierarchy, where a multiplexer or demultiplexer is used to route signals among multiple endpoints. Its dual SPST architecture provides two independently controlled switching functions, allowing analog, test, measurement, or peripheral signals to be selected without duplicating surrounding circuitry. The family is specified for low-voltage, single-supply operation. A 60 ohm on-resistance provides a defined path impedance for many low-frequency and moderate-impedance analog circuits, while the dual-channel construction supports compact signal routing. Operation is also identified at 3.3 V and 5 V supply levels, covering common consumer, industrial, communication, and portable-system rails. The ISL84543CB is intended to add routing capability to systems with limited analog inputs or general-purpose I/O. Its two switch sections can be used independently, and the device is associated with drop-in replacements for MAX4541, MAX4544, and DG9263. These cross-references are important when maintaining an existing 8-SOIC layout or reducing design changes during component sourcing. Typical uses include battery-powered test equipment, analog measurement systems, peripheral selection, signal isolation, and compact embedded interfaces. Because the device operates from a single supply, it can simplify rails in portable systems where generating additional bipolar or split-supply voltages would be undesirable. When designing around the ISL84543CB, account for the 60 ohm path resistance and control-logic levels when interpreting signal attenuation, settling behavior, and logic compatibility. Keep routing traces short, provide a low-impedance supply connection near the device, and verify the control inputs against the voltage levels produced by the host microcontroller. Use the manufacturer pin-description table when assigning PCB tracks. This product page consolidates the exact ordering information, verified technical characteristics, documented cross-references, and practical design guidance for engineers evaluating the ISL84543CB in compact, single-supply analog-routing designs.

RFC Hubungi kami