Produk (44,000+)

LC4032ZC-5T48C - 32-Macrocell 1.8V CPLD | Lattice
LC4032ZC-5T48C

LC4032ZC-5T48C - 32-Macrocell 1.8V CPLD | Lattice

Lattice Semiconductor LC4032ZC-5T48C is a 32-macrocell CPLD with 32 I/O pins, a 5 ns propagation delay, and 250 MHz operating performance in a 48-pin TQFP surface-mount package. The device belongs to the ispMACH 4000Z high-density programmable logic device family and supports 1.8V operation with in-system programmability for configuration and board-level updates. A complex programmable logic device, or CPLD, is a programmable digital semiconductor that combines multiple programmable logic blocks with a flexible interconnect structure. CPLDs occupy the practical middle ground between simple programmable logic devices and larger FPGAs. The LC4032ZC-5T48C therefore provides a compact implementation path for deterministic glue logic, control logic, interface adaptation, and system-level conditional functions. The principal device attributes include 32 macrocells, two logic blocks, 32 available I/O pins, a 1.7 V to 1.9 V internal supply range, and a 5 ns propagation-delay grade. Its 48-pin TQFP package measures 7 mm by 7 mm according to the product listing. In-system programmability allows a programmed design to be updated without removing the device, provided the board supplies the required programming interface and power sequencing. The ispMACH 4000Z architecture is intended for high-density programmable logic applications where a relatively small logic count and straightforward deterministic behavior are important. The -5 suffix identifies the 5 ns speed grade, while the ZC portion places the device in the 4000Z family. The device can operate from 3.3 V, 2.5 V, or 1.8 V supply arrangements as described in the family documentation, while the product listing identifies a 1.8 V operating specification for this exact orderable device. Typical uses include industrial control, communications infrastructure, peripheral interfacing, boot and sequencing logic, data acquisition, and embedded system support functions. The combination of 32 I/O pins and a compact 48-TQFP footprint can reduce the number of separate logic devices needed for modest but interconnected control requirements. Design engineers should also account for programming voltage, I/O standards, timing constraints, and unused-pin treatment. For PCB implementation, place the device according to the exact package drawing in the Lattice datasheet and route programming and configuration signals away from high-speed nets. Validate all timing paths against the selected 5 ns speed grade and ensure that unused inputs are terminated in a defined state. The exposed package perimeter provides easy assembly inspection, although land-pattern and solder-reflow details remain critical to manufacturing yield. This product page combines the device architecture, pin-compatible family options, application guidance, and engineering-focused comparison information. It also organizes sourcing questions around the XAIPART Request a Quote form, helping buyers evaluate lifecycle, availability, and exact MPN requirements without relying on generic CPLD selection assumptions.

RFC Hubungi kami
LC4032ZC-5T48I - 5 ns 32-MC CPLD | Lattice Semiconductor
LC4032ZC-5T48I

LC4032ZC-5T48I - 5 ns 32-MC CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4032ZC-5T48I is an in-system-programmable SuperFAST CPLD with 32 macrocells, a 5 ns speed grade, 32 user I/Os, and a 48-LQFP package. It operates across 1.8 V, 2.5 V, and 3.3 V supply choices, supports a maximum operating frequency of 400 MHz, and provides a 4.4 ns propagation delay. These characteristics position the device for density, timing, and interface requirements that exceed simple low-complexity PLD designs. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that converts digital logic descriptions into deterministic hardware. The ispMACH 4000 architecture combines programmable logic blocks, programmable interconnect, dedicated global-clock resources, and in-system programmability. Within the broader hierarchy, a CPLD is a programmable logic device, a digital IC, and a semiconductor used to implement glue logic, control functions, interfaces, and compact subsystem logic. Key features include four programmable global-clock pins, support for 1.8 V, 2.5 V, and 3.3 V operation, a 400 MHz maximum operating frequency, and up to 32 user I/Os. The 5 ns speed designation identifies the target propagation-delay class, while the 4.4 ns propagation-delay figure describes the device's stated logic timing. In-system programming allows a programmed configuration to be updated through the device interface without relying on a separate external programming fixture. The LC4032ZC-5T48I is intended for designs requiring a practical balance between logic density, pin count, and predictable timing. Its 32 macrocells provide more integration than basic GAL-type devices, while the dedicated global-clock resources simplify clock distribution across synchronous control logic. Multiple I/O arrangements around the package support parallel data paths, although the exact bank and voltage rules should be checked against the manufacturer's pin-description and electrical tables before PCB implementation. Typical applications include industrial control and instrumentation, communication-interface glue logic, test and measurement equipment, embedded system control, and general-purpose programmable interface logic. The device is particularly useful when a design requires more routing flexibility and deterministic control than a small combinational PLD but does not need the software toolchain and resource structure of an FPGA. The primary PCB consideration is correct voltage-compatible I/O assignment. Use the manufacturer pin-description table to identify power, ground, configuration, clock, and user-I/O functions before routing. Decoupling and signal-integrity practices should follow the datasheet's recommended power-network layout, with short return paths and deliberate handling of configuration pins to prevent unintended programming states. This product record combines device specifications, timing and density information, practical implementation guidance, and a package-matched comparison focused on engineering selection. It is intended to help designers identify the correct Lattice option, plan the footprint and power architecture, and confirm that a candidate replacement preserves the LC4032ZC-5T48I's essential electrical and timing constraints.

RFC Hubungi kami
LC4064B-10T44I - 64-Macrocell 10 ns CPLD | Lattice Semiconductor
LC4064B-10T44I

LC4064B-10T44I - 64-Macrocell 10 ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064B-10T44I is an ispMACH 4000B complex programmable logic device with 64 macrocells, four logic blocks, and a maximum propagation delay of 10 ns in a 44-pin TQFP package. It supports 1.8 V, 2.5 V, and 3.3 V in-system programming and provides 30 user I/O pins for compact programmable control, interface, and glue-logic designs. A CPLD is a programmable logic device that combines nonvolatile configuration storage, programmable logic structures, and user I/O in a single integrated circuit. Within the semiconductor hierarchy, the LC4064B belongs to the complex programmable logic device class, alongside FPGA and CPLD devices used to implement fixed digital functions that can be revised during development or field updates. The ispMACH 4000B architecture provides four logic blocks and 64 macrocells for moderate-density combinational and sequential logic. Its 10 ns speed designation supports interfaces and control functions operating above the timing range of slower legacy PLDs. Thirty I/O pins provide access to external buses, status signals, and control lines while keeping the device in a compact 44-TQFP package measuring 10 mm by 10 mm. Programming support for 1.8 V, 2.5 V, and 3.3 V systems enables integration with contemporary mixed-voltage logic. The manufacturer datasheet identifies the LC4064B-10T44I as an in-system programmable SuperFAST high-density PLD, making it suitable for designs where a small logic array must be updated without replacing the assembled board. Typical uses include industrial control logic, peripheral adapters, legacy bus conditioning, display and instrument interfaces, and compact embedded control systems. The 30 I/O count is particularly useful for bridge functions requiring several data, address, enable, and status signals without moving to a larger programmable-logic package. PCB design should preserve the package power and ground connectivity specified in the manufacturer datasheet and route programming signals away from sensitive clock or data paths. Because the public product information confirms the 44-terminal TQFP outline but does not reproduce the complete pin-description table, use the manufacturer pinout for every board-level assignment. This page combines the device architecture, package information, programming interfaces, pin-compatible family alternatives, comparison criteria, and practical application guidance needed to evaluate the LC4064B-10T44I for an existing programmable-logic design.

RFC Hubungi kami
LC4064B-10T48I - 64-Macrocell 125MHz CPLD | Lattice
LC4064B-10T48I

LC4064B-10T48I - 64-Macrocell 125MHz CPLD | Lattice

The Lattice Semiconductor LC4064B-10T48I is an in-system-programmable SuperFAST CPLD with 64 macrocells, a 125 MHz maximum operating frequency, and a 48-pin TQFP package. It combines programmable logic, 4 dedicated input pins, and 32 general-purpose I/O pins in a compact surface-mount footprint suited to industrial control, interface consolidation, and embedded glue-logic designs. A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor positioned between fixed-function logic ICs and larger FPGAs. It belongs to the FPGA and CPLD hierarchy, combining nonvolatile in-system programming with a comparatively simple architecture for implementing Boolean logic, counters, state machines, bus decoding, and control functions. The ispMACH 4000B family targets designs requiring fast routing, deterministic control logic, and efficient PCB integration without an external configuration memory. Key features include 64 macrocells, a 125 MHz operating frequency associated with the 10 ns device grade, 2.5 V operation, and 32 dedicated general-purpose I/O pins plus 4 dedicated inputs. The Lattice family documentation identifies 3.3 V, 2.5 V, and 1.8 V operation across the applicable device families. In-system programmability allows the configuration memory to be rewritten by the host system, supporting production programming, field updates, and logic revision without removing the device from its assembled circuit board. The 48-pin TQFP package uses a square, gull-wing surface-mount form. Its 48-terminal arrangement supports the mixed signal requirements of a typical control design: programmable I/O, dedicated inputs, power, ground, and configuration or clock-related connections. Because this is a digital programmable-logic IC, no safe-operating-area curve applies. Thermal design instead depends on supply voltage, I/O switching activity, clock activity, board construction, and the package's exposed heat-transfer path through the PCB. Typical applications include industrial motor sequencing, programmable relay control, instrumentation signal conditioning interfaces, multi-function peripheral controllers, and embedded system bus arbitration. The dedicated inputs can handle fixed control signals while the 32 general-purpose I/O pins are assigned by the CPLD design. The 125 MHz performance class is also appropriate for short control loops and clocked state machines where deterministic timing is more important than the parallel logic capacity of a large FPGA. Designers should assign pins from the manufacturer pin-description table rather than inferring terminal functions from package position. Configuration pins, dedicated inputs, general-purpose I/O, power, and ground each have distinct requirements, and an incorrect assignment can place a normal operating signal on a configuration function. PCB layout should provide a continuous ground plane, short supply connections, and appropriate decoupling close to the power terminals. Programming should follow the ispMACH 4000 family procedures and use a voltage-compatible programming interface.

RFC Hubungi kami
LC4064B-25T44C - SuperFAST High-Density CPLD | Lattice
LC4064B-25T44C

LC4064B-25T44C - SuperFAST High-Density CPLD | Lattice

Lattice Semiconductor Corporation LC4064B-25T44C is a 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density programmable logic device. The device is presented in the LC4064B product family and is identified by the 25 speed-grade designation and T44C package/order suffix. It belongs to the CPLD hierarchy, combining configurable digital logic, nonvolatile configuration storage, and in-system programmability in one integrated circuit. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that implements digital functions through a configurable logic architecture. CPLDs are positioned between simple programmable logic devices and larger programmable logic arrays. Compared with a fixed-function logic IC, a CPLD allows designers to revise Boolean equations, interface logic, control logic, and product-specific functions without changing the PCB. In-system programming further allows configuration to be loaded or updated through the board-level programming path. The LC4064B family is described by Lattice as SuperFAST and high-density. Its supported 3.3 V, 2.5 V, and 1.8 V operation makes it relevant to mixed-voltage digital systems where a programmable logic device must operate alongside modern low-voltage processors, programmable controllers, and communication ICs. The 25 designation identifies the device ordering variant associated with the LC4064B-25T44C part number, while exact timing, logic-cell, pin, and package dimensions should be confirmed in the manufacturer datasheet before release. Technically, the device combines programmable logic blocks, programmable interconnect, input and output structures, and configuration memory. These resources can be assigned to combinational and registered digital functions, allowing the LC4064B to implement control, decoding, glue logic, bus arbitration, interface conditioning, and state-machine functions. In-system programmability supports manufacturing, update, and prototype workflows where logic configuration must be changed independently of the PCB assembly. Typical uses include industrial control interfaces, data-acquisition modules, instrumentation, embedded system support logic, communications equipment, and general-purpose digital design. The device can be especially useful when several small logic functions must be consolidated into one programmable component or when firmware-controlled field updates require a flexible logic fabric. Designers should verify interface voltage tolerance, edge-rate requirements, output drive, and input thresholds against the specific system before using it with high-speed external buses. PCB design should follow the exact pin and land-pattern details in the Lattice Semiconductor datasheet. Keep programming signals and configuration data away from sensitive analog or high-speed nets, provide the required decoupling near the device, and include the specified programming interface for field updates. Because logic timing depends on the compiled design, a timing-constrained post-fit simulation is essential before hardware release. This page combines the verified product identity, programming-voltage context, package and ordering information, sourcing guidance, and engineering guidance for evaluating the LC4064B-25T44C. Exact electrical limits, pin functions, resource counts, timing tables, and lifecycle status should be selected from the manufacturer datasheet and official product documentation rather than inferred from the ordering code.

RFC Hubungi kami
LC4064B-25T48C - 64-Macrocell 2.5ns CPLD | Lattice
LC4064B-25T48C

LC4064B-25T48C - 64-Macrocell 2.5ns CPLD | Lattice

Lattice Semiconductor LC4064B-25T48C is an ispMACH 4000B complex programmable logic device with a 64-macrocell architecture, 4 logic blocks, and 32 user I/O pins. The device offers a maximum propagation delay of 2.5 ns, supports 3.3 V, 2.5 V, and 1.8 V operation, and is supplied in a 48-pin TQFP surface-mount package measuring 7 mm by 7 mm. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines non-volatile configuration, deterministic logic, and flexible I/O in a compact package. The LC4064B belongs to the CPLD hierarchy, where it provides an alternative to a small FPGA when a design requires simple glue logic, control functions, signal conditioning, or compact programmable sequencing. Its in-system programmability allows a board to be configured or reconfigured without removing the device. The principal performance specification is the 2.5 ns maximum propagation delay represented by the “-25” speed designation. The device also provides 32 user I/O pins, allowing external interfaces and logic connections to be consolidated into one programmable component. Its 64-macrocell architecture is organized into 4 logic blocks, giving designers a structured implementation target for Boolean equations, counters, decoders, multiplexers, and state-machine control logic. The LC4064B is identified as a SuperFAST high-density PLD and supports 3.3 V, 2.5 V, and 1.8 V supply configurations. These voltage options make the family suitable for systems that need programmable logic across multiple supply domains. The TQFP-48 package provides a conventional surface-mount footprint with 48 pins, while the 7 mm by 7 mm body size supports compact assembly without requiring a fine-pitch BGA package. Typical uses include industrial control and automation, interface bridging, sensor and instrumentation signal conditioning, embedded system control, communications equipment, and compact peripheral logic. The deterministic CPLD architecture and in-system programming capability are especially useful when a design must combine multiple fixed-format interface functions, control sequencing, and field-updatable logic on one board. PCB design should account for all 48 package pins, configure unused inputs appropriately, and validate every connected I/O against the device's supply voltage. Designers should also consult the manufacturer pin-description and package diagrams when assigning PCB nets; those assignments determine whether a three-state, input, output, or configuration function is electrically appropriate. This page consolidates the device architecture, timing designation, package details, same-family replacement options, and practical selection guidance into one engineering reference. It also distinguishes verified device facts from specifications that require confirmation through the Lattice Semiconductor datasheet.

RFC Hubungi kami
LC4064B-5T100C - 64-Macrocell 5 ns CPLD | Lattice
LC4064B-5T100C

LC4064B-5T100C - 64-Macrocell 5 ns CPLD | Lattice

Lattice Semiconductor LC4064B-5T100C is an ispMACH 4000B in-system programmable complex programmable logic device with 64 macrocells, 64 user I/O pins, and a 5 ns pin-to-pin delay in a 100-lead TQFP package. It combines programmable logic density with a maximum operating frequency of 227 MHz and an internal supply voltage range of 2.3 V to 2.7 V. The device is positioned for high-performance logic consolidation, interface bridging, and control implementations requiring faster timing than slower ispMACH grades. A CPLD is a programmable logic device that combines nonvolatile configuration storage, programmable logic architecture, and flexible I/O in one package. In the product hierarchy, the LC4064B belongs to the Lattice ispMACH 4000B family of complex programmable logic devices. Unlike a small PAL or GAL device, a CPLD provides multiple macrocells and routing resources that can implement substantially larger control, decoding, bus arbitration, and interface functions. The principal device attributes are 64 macrocells, 64 user I/O pins, a 5 ns pin-to-pin delay, and a 227 MHz maximum operating frequency. Its in-system programmability permits the configuration memory to be updated through the programming interface without removing the device from the circuit. This is useful during prototype bring-up, production programming, or field upgrades where a stable PCB layout and reusable manufacturing flow are important. The ispMACH 4000B architecture provides predictable timing for combinational and registered logic functions. Engineers can consolidate separate PAL, GAL, and small-programmable-logic devices into one CPLD while retaining deterministic control over timing paths and board-level pin assignments. The 100-pin TQFP package provides a conventional surface-mount footprint with 64 user I/O pins and dedicated configuration, clock, control, and power connections. Typical uses include industrial control and automation, communication-interface bridging, peripheral expansion, signal decoding, data acquisition, and embedded system control. The 64 available I/O pins make the device especially useful for designs that need more parallel board connections than a small logic package can offer. The 227 MHz performance also supports moderately high-speed interface and control logic without moving to an FPGA. Design the power rails and decoupling around the Lattice Semiconductor datasheet requirements, and preserve the specified programming interface signals for in-system configuration. Confirm pin assignments, supported I/O standards, voltage tolerances, and timing constraints against the manufacturer documentation before layout release. Although a CPLD provides more integration than discrete logic, an FPGA may remain preferable when registers, block memory, higher I/O counts, or richer clocking resources are required.

RFC Hubungi kami
LC4064B-5T100I - 64-Macro CPLD, 5 ns, 100-TQFP | Lattice
LC4064B-5T100I

LC4064B-5T100I - 64-Macro CPLD, 5 ns, 100-TQFP | Lattice

The Lattice Semiconductor LC4064B-5T100I is an in-system programmable CPLD with 64 macro cells, a 5 ns system speed grade, and a 100-pin TQFP package. It belongs to the ispMACH 4000B family of complex programmable logic devices and supports 3.3 V, 2.5 V, and 1.8 V supply configurations. The part combines programmable logic, dedicated input and output structures, and nonvolatile configuration memory in one low-power device. A CPLD is a user-programmable semiconductor that sits between simple programmable logic arrays and more complex programmable logic devices. Its internal macro cells are organized to implement combinational and sequential logic through a deterministic interconnect structure. The LC4064B family offers useful logic density for interface control, bus arbitration, state-machine implementation, data conditioning, and embedded glue logic without requiring a large FPGA or a discrete gate array. The LC4064B-5T100I is identified by the “-5” speed grade, a 5 ns rated operating speed, and the “I” industrial temperature designation. Its 100-pin TQFP package provides 100 external terminals and is suited to automated PCB assembly and conventional surface-mount manufacturing. The family description identifies in-system programmability, allowing a configured design to be updated through the device programming interface rather than relying only on a factory-programmed configuration. Programmable logic is implemented by configuring the device’s internal macro-cell and interconnect resources to create the required Boolean functions, registers, and control paths. This makes the CPLD useful for consolidating small amounts of control logic that would otherwise require multiple GAL-type devices, discrete counters, or complex glue logic. Because configuration is nonvolatile, the implemented logic remains available after power is removed and restored, subject to the device’s specified configuration and power behavior. Typical uses include industrial interface logic, data-acquisition and test systems, communication-control blocks, embedded control systems, and product-interconnect logic. The 64 macro cells are especially useful when several control paths must share registered state, handshake signals, or fixed interface logic. The programmable architecture also supports design revisions because logic functions can be changed without replacing the physical device. PCB design should preserve the exact pin assignments and power-decoupling requirements defined in the Lattice Semiconductor datasheet and pinout documentation. Place the device-programming interface so it remains accessible during production or field update, route unused inputs to defined levels, and validate timing against the selected 5 ns speed grade and actual operating voltage. Industrial-temperature production designs should also verify the full operating-temperature requirement and sourcing constraints during qualification. This product page consolidates the device identity, package information, programming characteristics, comparison options, and practical implementation guidance. It is intended to help engineers distinguish speed-grade, temperature-grade, and family-variant differences while planning a board-level replacement without relying on the part number alone.

RFC Hubungi kami
LC4064B-5T44C - 64-Macro 5ns ISP CPLD | Lattice Semiconductor
LC4064B-5T44C

LC4064B-5T44C - 64-Macro 5ns ISP CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064B-5T44C is a 64-macro complex programmable logic device with a 5 ns speed grade, supplied in a 44-pin TQFP package. It belongs to the ispMACH 4000B SuperFAST high-density PLD family and supports in-system programming with 3.3 V, 2.5 V, and 1.8 V supply options. The combination of 64 configurable logic macros, in-system programmability, and a 5 ns device designation makes the device suitable for compact control, interface, decode, and glue-logic implementations. A CPLD is a programmable logic device that combines programmable AND/OR logic structures with nonvolatile configuration storage. Within the semiconductor hierarchy, a CPLD is a programmable-logic IC, a member of the FPGA and CPLD category, and a practical alternative to a small FPGA when designs require straightforward combinational and sequential logic, deterministic configuration, and a modest pin count. The LC4064B family specifically targets high-density SuperFAST applications where board-level control and interface logic must be consolidated without using a large programmable-logic device. Verified device information identifies 64 macro cells, a 5 ns speed designation, a 44-TQFP package, and in-system programming capability. The family description also confirms compatibility with 3.3 V, 2.5 V, and 1.8 V supply environments. In-system programming allows a board designer to configure or update the logic after PCB assembly, while the TQFP package supports conventional surface-mount assembly and inspection. Exact logic macro architecture, I/O counts, electrical limits, and timing tables are not present in the supplied records and must be confirmed in the manufacturer datasheet before design release. The LC4064B-5T44C is positioned for designs that need more logic density and a faster speed grade than slower Lattice CPLD options without moving to a substantially different device family. Its 64 macro cells provide a defined capacity for control-state machines, address decoding, bus arbitration, signal conditioning, and peripheral interfacing. Because the available records do not include the complete timing tables or I/O standards, system timing should be evaluated against the datasheet rather than inferred solely from the 5 ns family speed designation. Typical uses include industrial control logic, embedded peripheral interfaces, compact communications equipment, instrumentation, and general-purpose digital system support. A CPLD can consolidate decoding and control functions that would otherwise occupy several fixed-function ICs. It can also provide a stable interface between a microcontroller, memory, display controller, or communication peripheral, provided the device voltage, pin assignment, timing, and I/O standards are compatible with the surrounding circuit. The main design consideration is verification of the exact package pinout and electrical limits before layout. Designers should confirm which pins support in-system programming, determine the required VCC levels, and check every connected I/O against the LC4064B datasheet. Because no authoritative pin-by-pin pinout was included in the supplied data, the pinout field is intentionally null rather than reproducing unverified pin names. This page consolidates verified distributor identifiers, package and speed information, sourcing links, replacement constraints, and practical selection guidance that are not available from a simple distributor search result alone. It also distinguishes verified facts from unavailable electrical details, helping engineers evaluate LC4064B-5T44C without mistaking generic CPLD assumptions for device-specific specifications.

RFC Hubungi kami
LC4064B-5T44I - 64-Macrocell 5ns In-System CPLD | Lattice
LC4064B-5T44I

LC4064B-5T44I - 64-Macrocell 5ns In-System CPLD | Lattice

The Lattice Semiconductor LC4064B-5T44I is a 64-macrocell, 5 ns SuperFAST high-density complex programmable logic device in a 44-pin TQFP package. It supports 3.3 V, 2.5 V and 1.8 V operation and provides in-system programmability for flexible logic implementation after board assembly. The device combines programmable logic, dedicated function inputs, and non-volatile configuration storage in a single integrated circuit. A complex programmable logic device, or CPLD, is a programmable-logic semiconductor positioned between fixed-function logic and FPGA implementation. A CPLD uses interconnected macrocells to implement Boolean equations, state machines, counters, interfaces, and control logic. Because LC4064B configurations are retained in non-volatile memory, the logic continues operating without a configuration device after programming. The LC4064B-5T44I's headline characteristics are its 64 macrocells, 5 ns speed grade, 44-pin TQFP package, and support for 3.3 V, 2.5 V and 1.8 V supply voltages. The 5 ns grade is intended for designs requiring faster combinational and clocked logic than slower commercial alternatives. Its 44-pin package also offers a smaller board footprint than many high-pin-count PLD packages. The in-system programming capability allows the device to be configured through its programming interface while connected to the target circuit. This supports production programming, field updates, and design revisions without removing the IC from the board. The manufacturer classifies the LC4064B family as a SuperFAST high-density PLD, indicating an architecture aimed at higher logic density and performance than the original Lattice CPLD generation. Typical uses include industrial control, data-acquisition systems, communication equipment, test and measurement instruments, embedded control, interface logic, and general-purpose glue logic. The device is particularly appropriate when a design needs a stable 5 ns timing grade, retained configuration, and programmable logic without the resource requirements of a larger FPGA. Designers should verify the exact pinout, supported I/O standards, bank supply requirements, AC timing characteristics, and configuration interface against the manufacturer datasheet before layout release. Because the available verified results identify the package and basic device characteristics but do not provide the complete electrical tables or pin assignments, those details remain to be confirmed rather than inferred. This page consolidates the verified distributor descriptions, source links, application-oriented engineering guidance, and clearly identified data gaps for LC4064B-5T44I. It adds practical selection context without presenting unverified electrical limits, pricing, or pin assignments as manufacturer facts.

RFC Hubungi kami
LC4064B-5T48C - 64-Macrocell 400 MHz CPLD | Lattice
LC4064B-5T48C

LC4064B-5T48C - 64-Macrocell 400 MHz CPLD | Lattice

Lattice Semiconductor LC4064B-5T48C is a 64-macrocell in-system-programmable SuperFAST high-density PLD with a maximum operating frequency of 400 MHz, 2.5 ns propagation delay, and a 48-pin TQFP package. The device supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable operation for compact logic, interface, and control designs. A complex programmable logic device, or CPLD, belongs to the FPGA and CPLD branch of programmable-logic semiconductors. Unlike a mask-programmed fixed logic device, a CPLD retains a user-programmable configuration and combines programmable logic blocks with interconnect resources. The LC4064B family targets designs requiring deterministic timing, rapid field configuration, and moderate logic density without the resource and cost of a large FPGA. Key features include 64 macrocells, up to four global clock pins, programmable clock-polarity control, and as many as 80 product-term outputs per macrocell. Its 400 MHz maximum operating frequency and 2.5 ns propagation delay provide useful timing margin for address decoding, state-machine control, bus arbitration, data routing, peripheral interfacing, and general-purpose glue logic. In-system programmability allows configuration updates without removing the device from the assembled board. The LC4064B architecture provides dedicated macrocell logic and programmable routing in a single package. Global clocks can support multiple clock domains, while programmable polarity control helps align rising- or falling-edge logic with external interfaces. Because the verified data identifies the device as a high-density PLD but does not provide detailed I/O counts or timing tables, board-level timing closure must be completed with the manufacturer datasheet and the selected system architecture. Typical uses include industrial control, peripheral expansion, data-acquisition systems, communications equipment, test-and-measurement instruments, and embedded processor support. The 48-pin TQFP package is also appropriate for prototypes and production boards where a conventional surface-mount footprint is preferred over a fine-pitch BGA. Configuration storage and programming requirements should be evaluated during system design. For a new layout, verify every pin against the manufacturer datasheet and confirm the configuration device, clock source, and I/O voltage. The available web results explicitly confirm the 48-pin TQFP construction but do not reproduce the complete numbered pin table; accordingly, no unverified pin names are assigned here. Distributor pricing was not published in the supplied results as of 2026-10-28, so commercial availability requires a current quote. This page consolidates the verified 400 MHz performance, 2.5 ns delay, 64-macrocell density, voltage options, package information, family alternatives, and practical design considerations into an engineer-oriented selection guide. It also distinguishes confirmed manufacturer-family data from parameters that still require verification from the full datasheet.

RFC Hubungi kami
LC4064B-5T48I - 64-Macrocell 5ns ISP CPLD | Lattice
LC4064B-5T48I

LC4064B-5T48I - 64-Macrocell 5ns ISP CPLD | Lattice

Lattice Semiconductor LC4064B-5T48I is a 64-macrocell SuperFAST high-density CPLD with 32 I/O, a 5 ns speed grade, in-system programmability, and a 48-pin TQFP surface-mount package. It supports 3.3 V, 2.5 V, and 1.8 V operation, making it suitable for modern logic interfaces that require flexible interconnect and configuration after PCB assembly. A complex programmable logic device, or CPLD, belongs to the programmable-logic hierarchy: programmable logic device > CPLD > reconfigurable digital logic > semiconductor. It combines programmable AND-array logic, dedicated macrocells, and user-programmable interconnect to implement control, decoding, interface, and glue logic. Unlike a mask-programmed fixed function IC, a CPLD can be configured from a stored programming file, allowing design revisions without changing the PCB. The LC4064B includes 64 macrocells and 32 I/O according to the verified product listing. Its 5 ns speed designation supports deterministic propagation performance in control paths, bus arbitration, state machines, and peripheral interfacing. In-system programmability allows configuration through the same board after fabrication, reducing assembly rework and supporting field updates when the programming interface is retained. The device belongs to the ispMACH 4000B family and is described by Lattice Semiconductor as a 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density PLD. Its 48-LQFP package provides 32 user I/O in a surface-mount footprint, making it practical for automated assembly and prototypes that need both programmable logic and a conventional fine-pitch package. Typical uses include industrial control and automation, communication-interface logic, test and measurement equipment, embedded system peripheral expansion, and general-purpose digital prototyping. In these systems, the CPLD can consolidate address decoding, handshake sequencing, latch logic, and protocol adaptation while avoiding the development cycle associated with a custom ASIC. Designers should verify the power-supply topology, I/O voltage limits, configuration pins, and programming source against the manufacturer datasheet before layout. The verified data identifies a -40 °C to +105 °C junction-temperature range and a 48-LQFP package, but does not provide the complete pin table, absolute maximum ratings, recommended decoupling, or AC timing values in the supplied records.

RFC Hubungi kami
LC4064B-75T44C - 64-Macrocell 168MHz CPLD | Lattice
LC4064B-75T44C

LC4064B-75T44C - 64-Macrocell 168MHz CPLD | Lattice

The Lattice Semiconductor LC4064B-75T44C is a SuperFAST high-density complex programmable logic device with 64 macrocells, a maximum operating frequency of 168 MHz, and a 44-pin TQFP package. It belongs to the ispMACH 4000B family, whose in-system-programmable architecture supports 3.3 V, 2.5 V, and 1.8 V operation for adaptable logic-density and industrial designs. The 44-pin package is supplied in a tray for prototype, automated production, and low-to-medium volume assembly. A complex programmable logic device, or CPLD, is a programmable digital logic IC that combines multiple sum-of-products logic blocks with a non-volatile configuration memory. A CPLD sits between simple fixed-function gates and FPGAs in the digital-logic hierarchy: it provides faster and more deterministic routing than many FPGAs, retains its configuration after power removal, and offers in-system programmability. The LC4064B-75T44C therefore suits control logic, bus arbitration, state machines, address decoding, interface bridging, and legacy peripheral replacement. Key characteristics include 64 macrocells, a 168 MHz maximum operating frequency, and compatibility with 3.3 V, 2.5 V, and 1.8 V supply configurations in the 4000B family. The -75 speed designation identifies the 168 MHz performance grade, while T44 identifies the 44-pin TQFP package. The C suffix identifies the commercial temperature option. These distinctions make the complete MPN important when matching an existing design, since changing the speed grade, package, or temperature grade can alter board compatibility, timing, and sourcing requirements. The ispMACH 4000 architecture blends the structures of the ispLSI 2000 and ispMACH 4A families. Its macrocell-based organization supports combinational and sequential logic, dedicated product-term logic, embedded memory resources, and clocked registers. Designers use the Lattice development environment and isp programmer cables or JT programming methods to create, verify, and download designs. Because the configuration is non-volatile, the device begins operating from its stored logic immediately after power-up without an external configuration PROM. Typical uses include industrial control panels, data-acquisition modules, legacy peripheral controllers, communication-interface logic, instrumentation, test equipment, and embedded system glue logic. The 44-pin TQFP footprint also makes the device practical for designs that require more I/O than a very small package can offer while avoiding the larger footprint of a 100-pin device. When planning a layout, assign every pin according to the manufacturer pin-description table and reserve routing space for programming signals, clock inputs, and configuration access. Decoupling requirements, operating-voltage limits, and unused-pin handling should be taken directly from the LC4064B datasheet. Timing closure must be checked against the selected -75 speed grade and the actual system clock rather than inferred only from the family headline frequency. This page combines the device architecture, package and speed information, drop-in family options, application guidance, comparison parameters, and practical layout considerations in one engineering-focused reference. It also identifies where package, timing, and lifecycle information must be confirmed before an engineering release or production transition.

RFC Hubungi kami
LC4064B-75T44I - 64-Macrocell 7.5ns CPLD | Lattice Semiconductor
LC4064B-75T44I

LC4064B-75T44I - 64-Macrocell 7.5ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064B-75T44I is a 64-macrocell in-system programmable complex programmable logic device with a 7.5 ns maximum propagation delay, operating from a 2.5 V supply in a 44-pin TQFP package. It belongs to the ispMACH 4000B family, which combines programmable logic, registers, and dedicated resources for compact, high-speed control and interface designs. A complex programmable logic device, or CPLD, is a programmable digital semiconductor that sits between fixed-function logic and an FPGA in the design hierarchy. A CPLD combines a programmable AND-array with a programmable OR-array, providing deterministic routing, nonvolatile configuration storage, and fast logic implementation without an external configuration device. The ispMACH 4000B architecture places 64 macrocells in four logic array blocks for designs requiring moderate logic density and high pin-to-pin performance. Key characteristics include 64 macrocells, four logic array blocks, a 7.5 ns speed grade, and 2.5 V operation. The 44-TQFP surface-mount package provides 44 external connections for power, configuration, clock, and user I/O. In-system programming allows the device to be configured through its programming interface without removing it from the circuit, supporting production programming, field updates, and prototype reconfiguration. The LC4064B-75T44I is suited to designs where predictable propagation delay and compact implementation are more important than very high logic density. Its macrocell-based architecture supports combinational and registered logic, state machines, bus arbitration, address decoding, interface control, and low-latency glue logic. Device configuration is retained in nonvolatile memory, so the implemented logic remains available after power is removed and re-applied. Typical uses include industrial control modules, peripheral controllers, data-acquisition front ends, communication equipment, and embedded system support logic. The 7.5 ns grade is appropriate for synchronous control paths and moderately clocked interfaces, while the 64-macrocell capacity provides room for decoding, handshake logic, and state-machine implementations. Its industrial-temperature ordering option also suits equipment designed for extended environmental duty. Designers should confirm the exact supply-voltage range, pin-level I/O limits, configuration timing, and unused-pin requirements in the Lattice Semiconductor datasheet and package drawing. PCB layout should provide a short, continuous ground plane, decouple each supply rail locally, and route configuration and clock signals away from noisy switching nodes. Use the ispMACH implementation flow and timing constraints to validate every registered path before programming hardware. This page combines the verified device identity, package information, architecture details, replacement candidates, comparison parameters, and practical design guidance in one engineering-focused reference. It also highlights where engineers must consult the original manufacturer documentation for exact pin assignments, timing tables, and power specifications.

RFC Hubungi kami
LC4064B-75T48C - 64-Macro, 7.5 ns CPLD | Lattice Semiconductor
LC4064B-75T48C

LC4064B-75T48C - 64-Macro, 7.5 ns CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064B-75T48C is a 64-macro-cell complex programmable logic device with a 7.5 ns speed designation, supplied in a 48-pin TQFP package. It belongs to the Super Fast High Density PLD family and provides in-system programmable logic for consolidating multiple fixed-function digital functions into one configurable device. A complex programmable logic device, or CPLD, is a user-programmable semiconductor placed in the hierarchy between simple programmable logic devices and larger FPGAs. Its internal macro cells are organized into programmable logic blocks connected through a fixed interconnect structure. This architecture is useful when a design needs combinatorial and sequential logic, flexible pin assignment, and in-system reconfiguration without the resource cost of a much larger FPGA. The LC4064B-75T48C is identified by three principal ordering characteristics: 64 macro cells, a 7.5 ns device speed designation, and a 48-pin TQFP package. The 7.5 ns designation represents the device’s speed class within the LC4064B family and should be considered alongside the complete timing specifications when designing synchronous interfaces. The TQFP package provides a surface-mount format suitable for compact PCB assemblies and automated production. The Super Fast High Density PLD architecture is intended for glue-logic, control, decoding, interface adaptation, and embedded control applications. Its fixed internal interconnect can provide predictable routing for registered state machines, address decoding, bus control, and peripheral bridging. Because programming is nonvolatile and in-system programmable, the same PCB can support configuration changes without replacing the component. Typical uses include industrial control logic, data-acquisition systems, communication-interface conditioning, legacy peripheral emulation, and compact embedded-control boards. The 48-pin package is particularly useful when a design needs moderate I/O capacity and a conventional fine-pitch surface-mount footprint without moving to a larger ball-grid-array package. Existing LC4064 architectures can also be migrated among compatible speed grades after timing, power, and temperature requirements are checked. A primary design consideration is timing closure. Engineers should use the manufacturer’s device data and pin-description tables to establish clock, setup, hold, and propagation limits rather than treating the 7.5 ns ordering code as a complete timing specification. PCB layout should preserve short clock paths, provide clean return paths for supply and ground, and route sensitive signals away from noisy switching nodes. This product record combines the exact ordering information, package identity, family descriptions, sourcing references, and cross-reference findings for LC4064B-75T48C. It also identifies device-family alternatives and separates confirmed replacement candidates from variants that require design-specific validation.

RFC Hubungi kami
LC4064B-75T48I - 64-Macrocell 7.5ns CPLD | Lattice
LC4064B-75T48I

LC4064B-75T48I - 64-Macrocell 7.5ns CPLD | Lattice

The Lattice Semiconductor LC4064B-75T48I is a 64-macrocell complex programmable logic device with a 7.5 ns maximum delay and in-system programmability, housed in a 48-pin TQFP package. It supports 1.8 V, 2.5 V, and 3.3 V operation, making it a programmable logic option for compact digital control, interface, and signal-routing designs. A complex programmable logic device, commonly called a CPLD, combines programmable AND/OR logic structures with a non-volatile configuration architecture. Within the broader semiconductor hierarchy, a CPLD sits between simple programmable logic arrays and larger FPGAs. It is used where deterministic timing, compact implementation, and non-volatile logic configuration are more important than the very high logic density available in an FPGA. The LC4064B-75T48I provides 64 macrocells, a 7.5 ns speed designation, and in-system programming. Its 1.8 V, 2.5 V, and 3.3 V core-voltage choices allow the device to be integrated with systems using more than one common logic-voltage range. The 48-pin TQFP package also provides a conventional surface-mount format for automated assembly and prototype-board construction. The -75 suffix identifies the 7.5 ns speed grade, while the -48I ordering code corresponds to the 48-pin industrial-temperature option. The I designation identifies the extended industrial temperature range. For timing-critical designs, engineers should treat the 7.5 ns value as the device speed designation and use the manufacturer datasheet for individual path-delay, setup, hold, and AC-parameter limits rather than assuming that every signal path has identical delay. Typical uses include industrial control logic, peripheral interface decoding, data-routing networks, embedded control glue logic, and legacy system upgrades. The device is especially relevant when a design requires a non-volatile programmable logic solution with moderate density, predictable package availability, and in-system configuration capability. PCB design should preserve the device's required power, ground, configuration, clock, and I/O routing according to the manufacturer datasheet. Because the LC4064B is an older programmable-logic family, engineers should verify tool support, JEDEC programming-file compatibility, and the availability of a suitable design compiler before committing new production hardware. This page combines the core device identity, operating options, drop-in replacement candidates, comparison parameters, and implementation guidance. It also highlights the practical checks needed when programming files, industrial-temperature requirements, package fit, and replacement timing ratings must all be evaluated together.

RFC Hubungi kami
LC4064C-10T44I - 64-Macro 10ns In-System CPLD | Lattice
LC4064C-10T44I

LC4064C-10T44I - 64-Macro 10ns In-System CPLD | Lattice

Lattice Semiconductor LC4064C-10T44I is a 64-macro, 10 ns in-system-programmable complex programmable logic device packaged in a 44-pin TQFP. It belongs to the SuperFAST high-density PLD family and supports 3.3 V, 2.5 V, and 1.8 V operation, making it suitable for compact control, interface, glue-logic, and system-support functions. A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic blocks into one integrated device. In the broader hierarchy, a CPLD is a programmable logic device and a semiconductor, sitting between fixed-function logic and larger field-programmable gate arrays. Its principal advantage is nonvolatile configuration retention, allowing a programmed design to operate without a separate configuration controller after power-up. The LC4064C family combines 64 logic macros with a 10 ns speed designation. The macros can be interconnected to implement control logic, address decoding, state machines, data routing, interface adaptation, and other combinational or sequential functions. Because the configuration is stored in the device, the LC4064C-10T44I is useful where fast startup, deterministic operation, and logic integration are more important than the very large logic capacity of an FPGA. The device supports 3.3 V, 2.5 V, and 1.8 V supply arrangements, allowing the same programmable logic platform to be used across multiple board-level voltage environments. Its in-system-programmable characteristic supports configuration or reprogramming within the target system rather than requiring removal for separate programming. The 44-pin TQFP package also provides a surface-mount option for designs constrained by board area. Typical applications include industrial control interfaces, peripheral glue logic, power-management sequencing, communications-interface adaptation, test and measurement control, and embedded system support functions. In these systems, the LC4064C can consolidate fixed logic that would otherwise occupy multiple conventional ICs while preserving a compact, reconfigurable implementation. Design decisions should focus on timing closure, available I/O, supply selection, and the power and pin requirements of the selected package. The 10 ns speed grade indicates a substantially faster operating target than slower-rated members of the family, but exact setup and hold limits must be taken from the manufacturer datasheet for the selected clock, I/O mode, and voltage configuration. This product record combines the confirmed 64-macro, 10 ns, 44-TQFP characteristics with package-aware alternatives and practical implementation guidance. It is intended to help engineers determine whether this CPLD fits a specific control or interface design without confusing a genuine pin-compatible replacement with a device that merely serves a similar logic function.

RFC Hubungi kami
LC4064C-10T48I - 64-Macrocell 125MHz CPLD | Lattice
LC4064C-10T48I

LC4064C-10T48I - 64-Macrocell 125MHz CPLD | Lattice

The Lattice Semiconductor LC4064C-10T48I is an ispMACH 4000C-family CPLD with 64 macrocells, a 125 MHz maximum operating frequency, and 1.8 V operation in a 48-pin TQFP tray package. It is designed for compact, deterministic logic implementations where non-volatile configuration, in-system programmability, and a modest number of I/O resources are required. A complex programmable logic device is a programmable digital logic IC that combines an array of programmable logic and interconnect resources with configuration memory. Within the broader semiconductor hierarchy, the LC4064C belongs to the CPLD class, then to programmable logic devices and digital logic ICs. Unlike a mask-programmed PAL or GAL device, its logic configuration can be loaded or changed by a programmer, making it useful for prototyping, control, glue logic, and compact system integration. The LC4064C-10T48I provides 64 macrocells and a stated 125 MHz maximum operating frequency in the 4000C family. Its in-system-programmable architecture supports 3.3 V, 2.5 V, and 1.8 V device variants identified in the family documentation. The 48-pin TQFP package is a surface-mount format with 0.5 mm pitch, and the exact ordering code denotes tray packaging with an industrial temperature designation. The 4000C architecture combines programmable logic blocks with dedicated input and output structures, global clock resources, and programmable interconnect. This allows several related state machines, decoding functions, counters, and interface control functions to be consolidated in one device. Its deterministic CPLD implementation can also simplify timing analysis compared with a general-purpose microcontroller configuration containing multiple peripherals and interrupt paths. Typical uses include industrial control and factory automation, instrument-panel logic, sensor conditioning, power-system sequencing, communications interface control, and embedded control support. In each case, the device is useful when the logic must be retained non-volatile, the design must boot without executing a firmware image, or a small deterministic controller is needed close to the associated interface circuitry. PCB design should preserve the TQFP-48 land pattern, route programming access signals away from sensitive analog or high-speed nets, and validate all I/O assumptions against the device pin-description table. Because the documented architecture and I/O behavior determine the final system timing and power budget, designers should also check the manufacturer datasheet for electrical limits, clock requirements, and programming recommendations before release to production. This product page consolidates the verified device identity, package information, programming characteristics, lifecycle status, and drop-in candidates into an engineering-focused reference. It also adds practical design notes, parameter comparisons, and sourcing guidance intended to make legacy CPLD evaluation and replacement planning faster.

RFC Hubungi kami
LC4064C-25T44C - 64-Macrocell 2.5ns CPLD | Lattice
LC4064C-25T44C

LC4064C-25T44C - 64-Macrocell 2.5ns CPLD | Lattice

The Lattice Semiconductor LC4064C-25T44C is a 64-macrocell SuperFAST high-density complex programmable logic device with a maximum propagate delay of 2.5 ns, 30 user I/O pins, and support for 3.3 V, 2.5 V, and 1.8 V operation in a 44-pin TQFP surface-mount package. Its in-system programmability allows a board to be configured or reconfigured without removing the device. A complex programmable logic device is a programmable digital IC that combines AND-array logic, OR-array logic, and programmable interconnect in a single non-volatile architecture. Within the broader semiconductor hierarchy, a CPLD sits between fixed-function logic gates and field-programmable gate arrays. It offers deterministic timing, low power consumption, and simple architecture for glue logic, control logic, bus decoding, and interface adaptation. Key features of the LC4064C-25T44C include 64 macrocells, 30 user I/O pins, a 2.5 ns maximum propagate delay, and a 400 MHz device-class speed designation. In-system programmability supports field updates, while the 1.8 V, 2.5 V, and 3.3 V supply options accommodate mixed-voltage system designs. The 44-pin TQFP package provides a manageable pin count for compact control and interface boards. The -25C ordering option identifies the 2.5 ns performance grade, while the -T44C suffix identifies the 44-pin TQFP configuration and commercial temperature designation. Because the device uses a deterministic macrocell structure, timing behavior and routing remain predictable after programming. This makes the LC4064C useful when a design must implement several decoder and control functions while retaining a single, compact integrated package. Typical applications include peripheral bus decoding, address and command register logic, industrial control interfaces, legacy glue logic, and programmable signal conditioning. The 30 user I/O pins are sufficient for multi-bit data buses and control lines, while in-system programmability simplifies board bring-up and field configuration changes. The device can also serve as a companion controller in systems where an FPGA or microcontroller handles the primary processing function. When designing a PCB for this CPLD, assign the power, ground, programming, and user I/O pins directly from the manufacturer pin-description table. Keep the in-system programming interface accessible, follow the recommended bypass-capacitor placement, and confirm signal-scheme compatibility for 1.8 V, 2.5 V, or 3.3 V operation before releasing the layout. This page consolidates device characteristics, family-level alternatives, and practical implementation guidance. It also organizes the information an engineer normally has to piece together from the datasheet, distributor listings, and cross-reference resources when planning a CPLD replacement or control-logic redesign.

RFC Hubungi kami
LC4064C-25T48C - 64-Macrocell 2.5 ns CPLD | Lattice Semiconductor
LC4064C-25T48C

LC4064C-25T48C - 64-Macrocell 2.5 ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064C-25T48C is an ispMACH 4000C complex programmable logic device with 64 macrocells, a 2.5 ns typical propagation delay, 32 user I/O pins, and a 48-pin TQFP package. It belongs to the SuperFAST high-density PLD family and supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable devices. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines nonvolatile configuration memory, programmable logic, and I/O structures. In the broader hierarchy, the LC4064C is a CPLD, a programmable logic device, and a semiconductor. Its nonvolatile configuration allows the implemented control, interface, or glue logic to remain in the circuit without continuous configuration from an external processor after power-up. The LC4064C-25T48C provides 64 macrocells and 32 user I/O pins in a 7 x 7 mm surface-mount package. Its 2.5 ns speed designation is intended for designs requiring faster logic propagation than slower grades in the same device family. In-system programmability also permits configuration updates through the device programming interface, which is useful during manufacturing, prototyping, and field-update workflows. The part is identified by the LC4064C series, a -25 speed grade, and a T48 package code. The listed operating supply options include 3.3 V, 2.5 V, and 1.8 V, while the core supply range is identified as 1.65 V to 1.95 V. These options make the device relevant to mixed-voltage systems in which control logic interfaces with modern low-voltage digital rails. Typical uses include peripheral-interface bridging, bus decoding, industrial control logic, instrumentation, embedded system glue logic, and compact communication-equipment control blocks. The 32 user I/O pins can support interfaces that do not require the larger pin count of an FPGA, while the 64 macrocells provide substantially more logic capacity than small generic array logic devices. Designers should verify the exact I/O voltage, timing, pinout, and power requirements against the manufacturer datasheet before layout. Because a 48-pin TQFP has closely spaced leads, PCB routing should preserve adequate clearances and provide a continuous ground plane. Programming signals and configuration pins must also follow the manufacturer's recommended interface and termination guidance. This page organizes the device's programmable-logic characteristics, pin-compatible alternatives, application guidance, and engineering trade-offs into a practical selection reference. It also distinguishes the -25 speed grade from related device variants so engineers can assess lifecycle, timing, package, and replacement implications before committing a design.

RFC Hubungi kami
LC4064C-5T100C - SuperFAST High-Density CPLD | Lattice
LC4064C-5T100C

LC4064C-5T100C - SuperFAST High-Density CPLD | Lattice

Lattice Semiconductor Corporation LC4064C-5T100C is a SuperFAST high-density complex programmable logic device in a 100-pin TQFP package. It is an in-system programmable PLD designed for multi-voltage digital logic systems and supports 3.3 V, 2.5 V, and 1.8 V supply environments. Its -5 speed designation identifies it as the 5 ns performance grade within the LC4064C family. A complex programmable logic device, or CPLD, is a programmable digital semiconductor that combines multiple programmable logic blocks with a deterministic interconnect structure. The broader hierarchy is CPLD → programmable logic device → programmable logic → semiconductor. Unlike a software-driven processor, a CPLD executes its configured Boolean and sequential logic directly in hardware, providing deterministic response times and allowing design revisions through reprogramming. The LC4064C architecture provides a large platform for integrating control, interface, decoding, and glue-logic functions. Its family is identified as a SuperFAST high-density PLD, while the LC4064C part family supports 3.3 V, 2.5 V, and 1.8 V operation. This multi-voltage capability is useful when the device must interface with logic operating at different supply levels. Programming and configuration details must be implemented using the procedures and device support specified by Lattice Semiconductor. The -5 suffix denotes a nominal 5 ns speed grade. This timing classification is more useful than a generic clock-frequency claim because CPLD propagation and pin timing are specified across multiple operating conditions. System timing closure should therefore use the manufacturer's pin characteristics, AC test conditions, setup requirements, and hold requirements rather than treating the speed suffix as a standalone system-clock limit. Typical applications include industrial control and automation, general-purpose interface logic, data acquisition systems, consumer peripherals, communications equipment, and embedded control subsystems. In each case, the device can consolidate parallel logic, control sequencing, address decoding, state-machine behavior, and board-level interface functions into one programmable component while retaining a fixed pin-compatible hardware design between program revisions. The primary design consideration is exact footprint and timing validation. Confirm the physical TQFP-100 land pattern, pin assignments, supply rails, decoupling requirements, configuration interface, and I/O standards against the manufacturer datasheet before committing a PCB. Although the -5 grade provides strong timing performance, every external interface still requires propagation-delay and timing-margin analysis under the intended voltage, temperature, and load conditions. This product record combines the manufacturer device description, catalog identifiers, lifecycle information, and cross-reference candidates into an engineering-focused selection guide. It also distinguishes true package-compatible replacement candidates from comparisons that may require a different footprint, supply arrangement, programming file, or timing review. That practical distinction helps shorten sourcing and redesign evaluation for obsolete or end-of-life programmable-logic designs.

RFC Hubungi kami
LC4064C-5T100I - 64-Macrocell 1.8V CPLD | Lattice Semiconductor
LC4064C-5T100I

LC4064C-5T100I - 64-Macrocell 1.8V CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064C-5T100I is a discontinued 64-macrocell ispMACH 4000C complex programmable logic device with a 5 ns typical propagation delay, 227 MHz maximum operating frequency, and 1.8 V core supply. It is packaged in a 100-pin TQFP and is intended for industrial-temperature applications requiring nonvolatile, in-system reprogrammable logic. A complex programmable logic device, or CPLD, is a programmable logic semiconductor that combines multiple programmable logic blocks with a defined interconnect architecture. In the hierarchy of digital semiconductors, a CPLD belongs to programmable logic devices alongside FPGAs and PAL/GAL devices. The LC4064C provides deterministic timing, persistent configuration storage, and relatively simple design tools for glue logic, control logic, interface adaptation, and system-support functions. The device provides 64 macrocells and operates from a 1.65 V to 1.95 V internal core supply. Its 5 ns typical propagation delay supports operation up to 227 MHz, making it useful where conventional PAL and GAL logic is too slow. The ispMACH 4000 family supports in-system programming, allowing a board to be configured or updated without removing the device. The 100-pin TQFP package also provides ample external I/O for control, status, and data-path interfaces. The LC4064C family combines programmable logic blocks, programmable interconnect, configuration memories, and input/output structures in a single package. Because the configuration is nonvolatile, the implemented circuit remains present after power is removed and restored. This is valuable in industrial controllers, embedded equipment, communications interfaces, and legacy control systems that require deterministic behavior without continuous FPGA configuration overhead. Typical uses include industrial control and automation, communications-interface conditioning, test and measurement equipment, embedded peripheral control, and legacy system integration. In each case, the 64-macrocell capacity can consolidate multiple PAL-style functions into one device while preserving predictable propagation delays and a stable, reprogrammable design flow. PCB design must follow the manufacturer's pin-assignment and power-decoupling guidance, especially for the 1.8 V core rail, programming interface, clock inputs, and I/O reference requirements. Confirm the industrial-temperature operating limits and signal standards of the exact board before migration. Because this orderable has been discontinued, obsolete-board repair and design-for-migration programs should verify stock, traceability, and the availability of an active successor before committing a production release. This page combines the documented device characteristics, lifecycle status, same-package replacement context, and practical implementation guidance needed to assess the LC4064C-5T100I during legacy CPLD repair, redesign planning, and drop-in compatibility assessment.

RFC Hubungi kami
LC4064C-5T44C - 64-Macrocell 5 ns CPLD | Lattice Semiconductor
LC4064C-5T44C

LC4064C-5T44C - 64-Macrocell 5 ns CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064C-5T44C is a 64-macrocell in-system-programmable CPLD with a 5 ns speed grade, a maximum operating frequency of 227 MHz, and a 1.8 V supply option in a 44-pin TQFP package. It belongs to the ispMACH 4000C family of SuperFast high-density programmable logic devices, combining deterministic combinational logic, programmable output routing, global clock distribution, and in-system programmability in one surface-mount package. A complex programmable logic device is a semiconductor in the FPGA and CPLD family of programmable logic devices. Compared with a mask-programmable PAL or GAL, a CPLD stores its configuration in nonvolatile memory, allowing the logic design to be changed after manufacture. The LC4064C-5T44C supports 1.8 V, 2.5 V, and 3.3 V operation, making it suitable for systems that need flexible logic density without an external configuration PROM. Key features include 64 macrocells, a 5 ns speed designation, a listed maximum operating frequency of 227 MHz, and a listed propagation delay of 2.5 ns. The device provides up to four global clock pins with programmable clock polarity. These features support fast control paths, interface adaptation, bus arbitration, state-machine implementation, and glue logic where deterministic timing is more important than very high programmable-logic capacity. The SuperFAST architecture is intended for high-density logic implementations with predictable routing and dedicated global-clock resources. In-system programmability allows a PCB to be programmed or reprogrammed during production, test, or field updates without a dedicated programming socket or separate memory device. Designers must still verify the exact I/O standards, supported supply combinations, timing constraints, and electrical limits against the manufacturer datasheet before finalizing a PCB. Typical uses include industrial control and automation, communication-interface bridging, data-acquisition conditioning, embedded system control, test-equipment logic, and compact peripheral controllers. Its 64-macrocell capacity is most useful when a design needs several counters, state machines, address decoders, bus arbiters, or protocol converters but does not require the routing flexibility and logic capacity of a large FPGA. For a new design, preserve the 44-pin TQFP footprint and verify signal directions and pin multiplexing against the exact device variant. Account for supply-voltage and I/O-standard compatibility, use the manufacturer's recommended programming and termination practices, and validate timing with the actual external clock, loading, and operating-temperature conditions. The 5 ns speed grade should not be treated as a guarantee that every unregistered signal path meets the same timing. This page combines the verified device identity, package and speed information with practical selection guidance, design notes, and clearly qualified same-family replacement candidates. It also distinguishes confirmed public data from specifications that still require confirmation from the manufacturer datasheet or device-specific qualification records.

RFC Hubungi kami
LC4064C-5T44I - 64-Macrocell 5 ns CPLD | Lattice Semiconductor
LC4064C-5T44I

LC4064C-5T44I - 64-Macrocell 5 ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064C-5T44I is a 64-macrocell in-system-programmable CPLD from the ispMACH 4000C family, specified with a 5 ns propagation delay and housed in a 44-pin TQFP package. It operates with 3.3 V, 2.5 V, and 1.8 V in-system programming support according to the verified product result, while the related component listing identifies 30 I/O pins and an extended junction-temperature range of -40°C to 105°C. The device is intended for designs requiring deterministic programmable logic, compact pin count, and a relatively fast 5 ns speed grade. A CPLD is a programmable-logic device within the broader FPGA and CPLD hierarchy. Its internal macrocells and programmable interconnect are configured to implement combinational and registered logic functions, making it useful for control logic, interface adaptation, glue logic, signal conditioning, and system-level sequencing. Compared with a discrete gate-array implementation, a CPLD allows the logic map, interconnections, and I/O behavior to be changed without changing the PCB layout. The verified LC4064C-5T44I information identifies 64 macrocells, four internal logic blocks, a 5 ns propagation-delay grade, 30 I/O pins, in-system programmability, and a 44-pin TQFP package. The 5 ns speed grade is the principal selection criterion for timing-sensitive control paths. The -40°C to 105°C junction-temperature specification supports industrial temperature-range designs, provided that the package, power dissipation, and system thermal limits are evaluated together. Typical uses include industrial control, communication-interface logic, peripheral bridging, and compact embedded control systems. In these applications, the CPLD can consolidate multiple fixed-function gates into one configurable device, reduce the number of discrete ICs, and provide a hardware upgrade path when interface requirements change. The principal design consideration is timing closure. Designers should use the device's published AC timing data, pin constraints, and power-supply requirements from the manufacturer datasheet rather than relying only on the 5 ns headline number. The PCB must also provide a clean programming interface and adequate routing for the selected I/O standards. This page combines the verified distributor and manufacturer-result specifications with selection guidance, design cautions, and sourcing context. It does not infer undocumented electrical limits, pricing, pin assignments, or lifecycle claims that are absent from the supplied verification data.

RFC Hubungi kami