Lattice Semiconductor

LC4064C-10T48I - 64-Macrocell 125MHz CPLD | Lattice

MPN: LC4064C-10T48I ✗ Akhir Hayat
1.8 V Vdss 48-pin TQFP Package 125 MHz Speed
MOQ: 1 |

LC4064C-10T48I Ringkasan

The Lattice Semiconductor LC4064C-10T48I is an ispMACH 4000C-family CPLD with 64 macrocells, a 125 MHz maximum operating frequency, and 1.8 V operation in a 48-pin TQFP tray package. It is designed for compact, deterministic logic implementations where non-volatile configuration, in-system programmability, and a modest number of I/O resources are required.

A complex programmable logic device is a programmable digital logic IC that combines an array of programmable logic and interconnect resources with configuration memory. Within the broader semiconductor hierarchy, the LC4064C belongs to the CPLD class, then to programmable logic devices and digital logic ICs. Unlike a mask-programmed PAL or GAL device, its logic configuration can be loaded or changed by a programmer, making it useful for prototyping, control, glue logic, and compact system integration.

The LC4064C-10T48I provides 64 macrocells and a stated 125 MHz maximum operating frequency in the 4000C family. Its in-system-programmable architecture supports 3.3 V, 2.5 V, and 1.8 V device variants identified in the family documentation. The 48-pin TQFP package is a surface-mount format with 0.5 mm pitch, and the exact ordering code denotes tray packaging with an industrial temperature designation.

The 4000C architecture combines programmable logic blocks with dedicated input and output structures, global clock resources, and programmable interconnect. This allows several related state machines, decoding functions, counters, and interface control functions to be consolidated in one device. Its deterministic CPLD implementation can also simplify timing analysis compared with a general-purpose microcontroller configuration containing multiple peripherals and interrupt paths.

Typical uses include industrial control and factory automation, instrument-panel logic, sensor conditioning, power-system sequencing, communications interface control, and embedded control support. In each case, the device is useful when the logic must be retained non-volatile, the design must boot without executing a firmware image, or a small deterministic controller is needed close to the associated interface circuitry.

PCB design should preserve the TQFP-48 land pattern, route programming access signals away from sensitive analog or high-speed nets, and validate all I/O assumptions against the device pin-description table. Because the documented architecture and I/O behavior determine the final system timing and power budget, designers should also check the manufacturer datasheet for electrical limits, clock requirements, and programming recommendations before release to production.

This product page consolidates the verified device identity, package information, programming characteristics, lifecycle status, and drop-in candidates into an engineering-focused reference. It also adds practical design notes, parameter comparisons, and sourcing guidance intended to make legacy CPLD evaluation and replacement planning faster.

Pilihan pengganti yang segera untuk LC4064C-10T48I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LC4064C-10T48I (sama faktor bentuk dan kaki) — berbeza dalam Device Family, Package Type.

Lattice Semiconductor
Device Family: ispMACH 4000V
Package Type: Tray
Bandingkan Dengan LC4064C-10T48I →

LC4064C-10TN48I

✅ Masuk Drop-In
📦 TQFP-48
Same LC4064C family, 10 speed grade, and 64-macrocell configuration; ordering suffix differs by up to 20% in mechanical or temperature-code interpretation, requiring pin and package verification

📋 Alternatif rujukan (tidak dalam katalog)

LC4064V-10T48I

✅ Masuk Drop-In
Lattice Semiconductor
📦 TQFP-48
Complex Programmable Logic Device (CPLD) · ispMACH 4000V · 64 macrocells · 4 logic blocks · 125 MHz · 10 ns · 3.0 V to 3.6 V · 3.3 V, 2.5 V, and 1.8 V

Hubungi untuk harga

Lihat Datasheet →

LC4064V-10TN48I

✅ Masuk Drop-In
📦 TQFP-48
Same LC4064 name, 10 speed grade, and 48-pin class as the V-generation candidate; suffix differs while generation-specific functionality remains within a 20% migration margin

📋 Alternatif rujukan (tidak dalam katalog)

LC4064ZE-7TN48I

✅ Masuk Drop-In
📦 TQFP-48
The nominal speed code improves from 10 to 7, approximately a 30% timing difference, while retaining the LC4064 name and 48-pin class

📋 Alternatif rujukan (tidak dalam katalog)

LC4064C-10T48I Penilaian maksimum & Ciri-ciri Elektrik

Device Type Complex Programmable Logic Device (CPLD)
Device Family ispMACH 4000C
Macrocell Count 64 macrocells
Maximum Operating Frequency 125 MHz
Nominal Supply Voltage 1.8 V
Supported Family Supply Voltages 1.8 V, 2.5 V, or 3.3 V
Configuration Method In-System Programmable (ISP)
Package Type 48-pin TQFP
Package Pitch 0.5 mm
Jenis Pemasangan Surface Mount
Shipping Format Tray
Temperature Grade Industrial

Panduan Konfigurasi Pin LC4064C-10T48I 0.5 mm

Konfigurasi pin untuk LC4064C-10T48I (0.5 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 0.5 mm untuk LC4064C-10T48I

Tiada data garisan pin yang diperoleh untuk LC4064C-10T48I.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LC4064C-10T48I patut untuk 6 aplikasis: Industrial Control and Automation, Instrumentation and Data Acquisition, Power-System Sequencing, Communications Interface Control, Sensor Signal Conditioning, Embedded System Support Logic.

🏭

Industrial Control and Automation

The LC4064C-10T48I is appropriate for deterministic factory-control logic that combines state machines, input decoding, sequencing, and output interlocks within 64 macrocells. Its 125 MHz maximum operating frequency provides ample timing headroom for many machine-control tasks, while in-system programming allows board-level configuration during production or maintenance. The 48-pin TQFP package supports compact surface-mount assemblies. Engineers should still validate every input threshold, output timing path, and supply condition against the device datasheet before connecting field wiring or safety-related circuits.

🔧

Instrumentation and Data Acquisition

In laboratory and process-instrumentation systems, the LC4064C-10T48I can consolidate measurement sequencing, mode control, alarm decoding, and interface timing into one programmable logic device. The 64-macrocell density is suitable for several small state machines without moving the design into a larger FPGA. Its non-volatile configuration also supports repeatable standalone operation after power is restored. Design care is needed for analog grounding, clock distribution, and isolation boundaries, because the CPLD coordinates digital functions but does not replace front-end signal conditioning.

⚡

Power-System Sequencing

The LC4064C-10T48I can implement rail-ordering, enable-control, monitor, and fault-latch logic around a multi-rail power system. Its 125 MHz maximum operating frequency allows rapid sequencing decisions compared with many low-speed supervisory mechanisms, while 64 macrocells can support multiple independent control paths. A real implementation should define fail-safe states, constrain unused outputs, and account for power-up behavior before programming is applied. The CPLD should not be the sole protection element where a hardware fault must be handled independently of programmable logic.

🌐

Communications Interface Control

The LC4064C-10T48I is useful as protocol glue logic between sensors, converters, memories, and host processors. Typical duties include framing, byte assembly, command decoding, parity generation, and programmable timing delays. The 64-macrocell capacity allows these functions to be consolidated while the 125 MHz figure supports reasonably fast control paths. For communication links, engineers must define clock-domain boundaries, metastability treatment, I/O voltage compatibility, and timing margins in the system design rather than treating the CPLD as a protocol controller with fixed standard compliance.

🧩

Sensor Signal Conditioning

The LC4064C-10T48I can coordinate digital filtering, threshold comparison, calibration tables, sampling control, and alarm outputs in a sensor interface. Its programmable architecture allows timing constants and control sequences to be changed without changing the PCB, while the non-volatile configuration preserves selected calibration behavior after power cycling. Performance depends on the external sensors and analog front end because the CPLD processes digital logic rather than directly conditioning precision analog signals. Review I/O thresholds and ground-return paths with the complete analog design.

🖥️

Embedded System Support Logic

The LC4064C-10T48I can serve as deterministic companion logic beside a microcontroller, handling reset coordination, power gating, watchdog supervision, interrupt routing, peripheral chip selection, or bus-cycle decoding. This arrangement preserves firmware flexibility while offloading small, timing-sensitive tasks into non-volatile programmable logic. The 48-pin TQFP footprint is manageable in a mixed-signal board, but designers must define ownership of every signal to prevent contention between the microcontroller and CPLD. Post-reset and brownout behavior should be verified for every cross-device path.

What is the LC4064C-10T48I?
The LC4064C-10T48I is a Lattice Semiconductor ispMACH 4000C-family complex programmable logic device with 64 macrocells and a 125 MHz maximum operating frequency. It is packaged in a 48-pin TQFP and supports in-system programming. According to the Lattice device listing, the device is intended for compact, deterministic programmable-logic applications where non-volatile configuration is required.
What are the key specifications of LC4064C-10T48I?
The LC4064C-10T48I has 64 macrocells, a 125 MHz maximum operating frequency, a nominal 1.8 V supply, and a 48-pin TQFP package. The device belongs to the ispMACH 4000C family and uses in-system programming for logic configuration. Lattice's family documentation identifies support for 3.3 V, 2.5 V, and 1.8 V device variants, although the exact I/O limits must be confirmed in the device datasheet.
Where can I download the LC4064C-10T48I datasheet PDF?
The LC4064C-10T48I datasheet PDF can be reached through the linked Lattice Semiconductor datasheet page, which provides circuit, pin, and technical information for the device. Use the manufacturer's pin-description and electrical-characteristics tables when assigning PCB nets or calculating timing. The Octopart datasheet result provides an additional route to the same manufacturer document.
Where can I find the LC4064C-10T48I pinout?
The LC4064C-10T48I pinout is documented in the Lattice Semiconductor datasheet under the package-pin description and device diagrams. The part uses a 48-pin TQFP footprint with 0.5 mm pitch, so the package drawing and numbering shown in the datasheet must be followed exactly. Assign unassigned or reserved pins according to the datasheet rather than inferring their functions from another 48-pin device.
Where can I buy LC4064C-10T48I online?
The LC4064C-10T48I can be requested through the Request a Quote form on this page, with the exact ordering code entered for traceability. Because the LC4064C family is discontinued, availability may involve legacy inventory rather than a current manufacturer production run. State the required quantity, delivery target, and acceptable packaging conditions when requesting the quotation.
What is the price of LC4064C-10T48I?
Use the Request a Quote form on this page for a current unit-price quotation for the exact LC4064C-10T48I ordering code. The part is from a discontinued family, so pricing can vary with inventory, lot traceability, and order quantity. A quoted response should identify the source condition, delivery terms, and the exact manufacturer part number being supplied.
What is the lead time for LC4064C-10T48I?
The current lead time for LC4064C-10T48I should be confirmed through the Request a Quote form on this page. The LC4064C family has been discontinued, so lead time depends on remaining inventory and whether the offered units are new, factory-sealed, or otherwise traceable. Include the requested delivery date and annual usage in the inquiry to obtain a meaningful commitment.
Is LC4064C-10T48I in stock?
Current LC4064C-10T48I stock status should be checked through the Request a Quote form on this page. No stock quantity should be inferred from the existence of distributor or manufacturer listings, particularly for a discontinued device. Ask the supplier to confirm available quantity, date code, lot traceability, and package condition before treating an inventory offer as production-sustainable.
What is the best drop-in replacement for LC4064C-10T48I?
LC4064C-10TN48I is the closest documented drop-in candidate because it retains the LC4064C device name, 10-speed designation, 64-macrocell configuration, and 48-pin package family. LC4064V-10T48I and LC4064V-10TN48I are additional same-brand 48-pin candidates, but generation and timing differences require design review. Pin compatibility, I/O standards, voltage, timing, and programming must be verified before substitution.
Can LC4064V-10T48I replace LC4064C-10T48I?
LC4064V-10T48I may serve as a legacy replacement candidate because it shares the Lattice LC4064 name, 10 speed designation, and 48-pin TQFP format. However, the C and V generations require verification of architecture, macrocell organization, pin functions, electrical limits, and programming compatibility. Treat it as a review candidate rather than an automatic substitution until the existing design has been recompiled and timing-checked.
When should I choose LC4064C-10T48I over LC4064V-10T48I?
Choose the original LC4064C-10T48I when maintaining an existing 4000C-family design and avoiding any transition between the C and V device generations is more important than pursuing a newer replacement path. The C-family designation identifies the target's architecture, while LC4064V-10T48I belongs to the earlier V designation. Retaining the original ordering code generally reduces the scope of schematic, PCB, and timing requalification.
Is LC4064C-10T48I suitable for industrial control applications?
The LC4064C-10T48I is identified by its ordering code as an industrial-temperature variant and is suitable for industrial control logic when all electrical and timing limits meet the operating environment. Its 64 macrocells support deterministic state-machine, decoding, sequencing, and interface-control functions. The 48-pin TQFP package also supports compact surface-mount PCB layouts, although thermal and signal-integrity margins must be checked.
What is the difference between LC4064C-10T48I and LC4064C-10TN48I?
The primary documented difference is the package-ordering suffix: LC4064C-10T48I is listed in a 48-pin TQFP tray configuration, while LC4064C-10TN48I appears as a separate 48-pin Lattice ordering code in comparison listings. Both retain the 10 speed designation and 64-macrocell 4000C family identity. Confirm the exact mechanical drawings, temperature suffix, and pin assignments before treating them as interchangeable.
What is the best Lattice equivalent for LC4064C-10T48I?
LC4064C-10TN48I is the closest same-brand candidate in the available cross-reference information because it preserves the LC4064C family, 10 speed grade, 64-macrocell configuration, and 48-pin class. LC4064V-10T48I, LC4064V-10TN48I, and LC4064ZE-7TN48I are secondary review candidates. A final replacement decision requires mechanical, electrical, timing, and programming compatibility checks.
Can a microcontroller replace LC4064C-10T48I?
A microcontroller can reproduce many combinational and sequential functions, but it is not a literal drop-in substitute for the 48-pin LC4064C-10T48I. A migration would generally require software development, bootloader and clock redesign, different power and reset handling, and a new PCB footprint. The CPLD remains attractive when deterministic startup, compact logic integration, and non-volatile configuration are more important than software flexibility.

Data referensi kejuruteraan untuk LC4064C-10T48I — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the original LC4064C-10T48I when maintaining a proven ispMACH 4000C design, preserving its 48-pin TQFP layout, and avoiding a generation transition are the primary objectives. LC4064C-10TN48I is the closest same-family review candidate because it retains the 64-macrocell architecture and 10 speed designation, but its suffix still requires exact package, temperature, and pin verification. LC4064V-10T48I and LC4064V-10TN48I are useful when broader legacy sourcing options are needed, provided the C-to-V architecture, timing, I/O, and programming differences are fully requalified. LC4064ZE-7TN48I may be considered when the timing grade and supply configuration are compatible, with its 7-versus-10 speed difference explicitly included in the analysis. None of these legacy substitutions should be treated as automatic replacements until the logic is recompiled, timing is checked, and the PCB mapping is confirmed.

Perbandingan dengan Gantian

Parametr Produk Ini LC4064C-10TN48I LC4064V-10T48I LC4064V-10TN48I LC4064ZE-7TN48I
Package 48-pin TQFP 48-pin package 48-pin TQFP 48-pin package 48-pin package
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Device Family ispMACH 4000C ispMACH 4000C LC4064V LC4064V LC4064ZE
Speed Designator 10 10 10 10 7

Penyeberangsung Jelas

  • Directly preserves the original C-generation device identity (vsLC4064V-10T48I)
  • Provides a documented 125 MHz maximum operating frequency (vsLC4064ZE-7TN48I)
  • Uses the 48-pin TQFP format specified for the original design (vsLC4064C-10TN48I)
  • Combines compact logic density with non-volatile configuration (vsATF16LV8C-10JU)

Catatan Desain

Route the programming interface and clock inputs according to the manufacturer pin-description and recommended-layout sections. Keep programming traces away from switching nodes and sensitive analog inputs, use a continuous ground reference beneath the device where the board stack-up permits, and place decoupling capacitors close to the associated supply pins. Confirm the actual pin assignments in the LC4064C datasheet before releasing artwork.

Do not treat a similar LC4064 suffix as proof of electrical equivalence. Compare device generation, speed code, temperature code, package drawing, I/O standards, supply limits, macrocell allocation, and programming architecture. The four listed candidates are drop-in review candidates, but each legacy substitution should be recompiled and timing-checked against the original design before production use.

Decouple each applicable supply rail locally and validate startup, shutdown, and brownout behavior in the assembled board. The device supports multiple voltage options across the family, so the ordering code and exact datasheet must determine the operating values. Where the CPLD controls sequencing for other circuits, define conservative output states before configuration is loaded and prevent unsafe outputs from being enabled solely through a programmable state machine.

Use the global clock and interconnect resources as directed in the device documentation, and constrain external timing paths according to the actual system clock rather than the 125 MHz maximum operating frequency. That headline figure describes device capability under specified conditions; it does not guarantee the same edge rate for every board-level path. Check setup, hold, skew, and output-load assumptions before assigning a high-speed clock to an external peripheral.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The device is identified as an industrial-temperature LC4064C CPLD, but specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer or lot documentation.

Pencarian Berhubungan

LC4064C-10T48I datasheet LC4064C-10T48I pinout LC4064C-10T48I datasheet pdf LC4064C-10T48I equivalent LC4064C-10T48I replacement LC4064C-10T48I cross reference LC4064C-10T48I footprint LC4064C-10T48I price LC4064C-10T48I stock Lattice LC4064C-10T48I LC4064C 64 macrocell 125MHz LC4064C-10T48I TQFP-48 LC4064C-10T48I vs LC4064V-10T48I LC4064C industrial control CPLD LC4064C in-system programmable logic

Komponen dan Tanda berkaitan

Lattice Semiconductor LC4064C-10T48I LC4064C-10TN48I LC4064V-10T48I LC4064V-10TN48I LC4064ZE-7TN48I ispMACH 4000C CPLD complex programmable logic device programmable logic device digital logic IC semiconductor in-system programming macrocell 125 MHz 1.8 V TQFP-48 TQFP package family surface-mount technology industrial control factory automation instrumentation power sequencing communication interface control sensor signal conditioning
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ