Produk (44,000+)

LM2903QPWRG4Q1 - Dual 36V Automotive Comparator | TI
LM2903QPWRG4Q1

LM2903QPWRG4Q1 - Dual 36V Automotive Comparator | TI

The Texas Instruments LM2903QPWRG4Q1 is an AEC-Q100 Grade 0 and Grade 1 automotive dual differential comparator with an open-collector output configuration, housed in an 8-pin TSSOP package. The device operates from 2 V to 36 V on a single supply or from plus or minus 18 V on dual supplies, making it suitable for high-voltage industrial and automotive signal-conditioning systems. A differential comparator compares two input voltages and changes its output state according to the polarity of the difference between them. The LM2903-Q1 family contains two independent comparators, allowing one package to implement two threshold decisions, window monitoring functions, or independent protection channels. Its wide input and supply voltage ranges support battery-derived systems, industrial control boards, and 24 V vehicle electrical environments. The automotive-qualified LM2903QPWRG4Q1 provides low offset voltage, low supply current, low input bias current, 1.3 microsecond propagation delay, and improved 2 kV ESD performance. Its open-collector outputs allow wired-AND operation with an external pull-up resistor and permit the output voltage to be referenced independently of the internal supply. This makes the device practical for interfacing with logic gates, relay drivers, and systems requiring fail-safe output states. The LM2903-Q1 family is designed for drop-in convenience with established LM2903-family footprints, helping reduce redesign effort when automotive qualification and a 36 V maximum supply are required. The 8-pin TSSOP package supports compact surface-mount layouts, while the -40 C to +125 C operating range supports harsh industrial and vehicle environments. Typical uses include automotive battery monitoring, overvoltage and undervoltage detection, fan-speed control, sensor conditioning, power-supply supervision, and industrial control systems. The dual architecture also allows both halves to operate independently, although their input common-mode behavior and output pull-up network must be checked against the system requirements. When laying out the board, keep comparator inputs away from switching nodes and route the ground reference directly to the device ground pin. Choose the external output pull-up for the required logic family, account for the open-collector sink-current limit, and validate the design across the full temperature range. This page combines manufacturer specifications, package details, verified listing information, drop-in alternatives, and practical design guidance for faster component selection.

RFC Hubungi kami
LM2903QPWRQ1 - 36V Automotive Dual Comparator | Texas Instruments
LM2903QPWRQ1

LM2903QPWRQ1 - 36V Automotive Dual Comparator | Texas Instruments

The Texas Instruments LM2903QPWRQ1 is an AEC-Q100 Grade 0 and Grade 1 automotive dual differential comparator with an open-collector, rail-to-rail output configuration, supplied in an 8-pin TSSOP (PW) package. It operates from a single or dual supply across a wide range of supply voltages up to 36 V, consumes 0.4 mA typical per comparator, and is specified for temperatures from -40°C to 125°C. A comparator is an analog integrated circuit that evaluates two input voltages and produces a logic-level indication of their relationship. The LM2903-Q1 family belongs to the broader differential comparator and analog signal-conditioning hierarchy, where it sits between general-purpose analog front ends and downstream control logic such as system supervisors, motor controllers, and automotive ECUs. Its differential inputs allow small voltage differences to be resolved without converting the signal through an analog-to-digital converter. Key features include a 36 V maximum supply capability, low supply-current drain independent of supply voltage, 25 nA typical input bias current, and 3 nA typical input offset current. The open-collector outputs can sink current for wired-AND logic or drive external pull-up devices, while the dual differential architecture places two independent comparator channels in one package. Automotive Grade 0 and Grade 1 qualification supports use in demanding environmental conditions. The device supports single-supply or dual-supply operation and is designed for low-power threshold detection. Its wide supply range makes it suitable for systems that must monitor voltages well above conventional 5 V or 12 V rails, including vehicle battery systems and industrial control boards. The rail-to-rail open-collector output stage also allows the output to approach the negative supply during low-level input conditions. Typical applications include automotive battery and power-supply monitoring, overvoltage and undervoltage detection, motor and solenoid control, sensor conditioning, and window or lighting logic. It is also appropriate for industrial control systems requiring a comparator that can operate across a wide supply range without drawing supply current that changes significantly with voltage. When designing around the LM2903QPWRQ1, verify logic-level compatibility between the open-collector output and the connected microcontroller or system logic. Provide a suitable pull-up resistor at each output, keep input and output traces short, and place bypass capacitance close to the supply pins. Consider input common-mode limits carefully when signals exceed the supply rails. This page consolidates the manufacturer’s automotive qualification details, package information, comparator specifications, cross-reference candidates, and practical circuit guidance. It supports faster component selection by placing electrical limits, package compatibility, replacement considerations, and application guidance in one engineering-oriented reference.

RFC Hubungi kami
LM2903QS-13 - 36V Dual Precision Comparator | Diodes Incorporated
LM2903QS-13

LM2903QS-13 - 36V Dual Precision Comparator | Diodes Incorporated

The Diodes Incorporated LM2903QS-13 is a dual precision voltage comparator designed for operation from a single supply or split power supplies. Its headline ratings include a 36 V maximum supply voltage, 2 mV input offset voltage, 25 nA input bias current, 0.6 mA supply current, and 5 nA input offset current. The device is packaged in an 8-pin SOIC and is qualified to AEC-Q100 for automotive applications. A voltage comparator is an analog interface IC that evaluates two input voltages and switches its output when one input becomes higher than the other. Within the semiconductor hierarchy, a comparator belongs to the amplifier IC family, supports signal conditioning, and is frequently used to bridge low-level analog measurements to digital logic. The LM2903 contains two independent comparators, allowing one package to monitor two thresholds or perform two independent decisions. The low input offset and bias-current characteristics support precise threshold decisions when signals originate from sensors, dividers, or low-level analog stages. The common-mode input range includes ground, a useful property for single-supply systems whose signals remain near the lower rail. Open-collector outputs also allow the two channels to be connected together for wired-AND operation and permit external pull-up resistors to establish the logic-high voltage independently of the comparator supply. The LM2903 architecture emphasizes low power consumption and broad supply compatibility rather than high-speed comparator performance. According to the Diodes Incorporated datasheet, the series supports single-supply operation over a wide voltage range and split-supply operation as well. This makes it suitable for industrial, automotive, and embedded systems where a sensing element compares a variable voltage against a reference before driving a control, fault, or sequencing circuit. Typical applications include supply sequencing, battery and power-system threshold detection, sensor signal conditioning, window-comparator implementations, overvoltage and undervoltage protection, and general digital-logic interfacing. Two independent channels can implement a two-threshold system, compare two sensor signals, or provide one always-enabled channel and one conditionally monitored channel. The 8-pin SOIC footprint is convenient for conventional surface-mount assembly. The principal design consideration is the open-collector output. Each output requires a pull-up resistor to the appropriate logic supply, and the selected resistor must satisfy the output sink-current and rise-time requirements. Inputs should also remain within their specified common-mode and differential ranges, while supply decoupling should be placed close to the device to limit switching-induced disturbance. This product record combines the LM2903QS-13 electrical identity, automotive-grade package information, family-level replacement context, and application-focused design guidance. It helps engineers identify the correct SOIC-8 part, understand its threshold-measurement role, and compare it with same-footprint dual-comparator options before finalizing a PCB or BOM revision.

RFC Hubungi kami
LM2903QTH-13 Dual 36V Comparator, TSSOP-8 | Diodes Inc
LM2903QTH-13

LM2903QTH-13 Dual 36V Comparator, TSSOP-8 | Diodes Inc

The Diodes Incorporated LM2903QTH-13 is a dual differential voltage comparator with two independent precision channels, a 36 V maximum supply rating, 2 mV input offset voltage, 25 nA input bias current and 0.6 mA typical supply current per channel, housed in an 8-pin TSSOP surface-mount package. A voltage comparator is an analog integrated circuit that compares two input voltages and converts the result into a logic-level output that indicates which input is higher. Within the semiconductor hierarchy, a comparator sits in the linear IC family alongside op amps and voltage references, and it is the simplest building block for threshold detection, level translation and open-loop control functions. Key features of the LM2903QTH-13 include AEC-Q100 Grade 1 automotive qualification, RoHS3 and REACH compliance, MSL Level 1 moisture sensitivity, and the use of green mold compound, all supporting automotive programs that require PPAP documentation. The device shares industry-standard 8-pin pinouts with the wider LM2903 and LM393 families, which makes board requalification and cross-brand second sourcing straightforward. Low quiescent current keeps the part attractive for always-on battery-powered sensing systems. Technically, the device contains two independent amplifier and output stages. Each channel offers differential inputs and an open-collector (open-drain) output stage, so an external pull-up resistor is required on every output. The wide 36 V supply ceiling allows the inputs and outputs to sit well above the logic rail of the controlling MCU, simplifying direct interface to 5 V, 12 V or 24 V systems without level shifters. The low input bias and offset currents minimize error when driving high-impedance sensor networks. Typical applications include automotive sensor interface and battery monitoring, industrial control and threshold detection, DC-DC converter current-limit loops, over-temperature protection circuits in power modules, and general-purpose logic level shifting where a pulled-up open-collector output is acceptable. When designing with the LM2903QTH-13, always fit pull-up resistors on OUT1 and OUT2, keep input common-mode voltage inside the supply range, and give each supply pin a local 100 nF decoupling capacitor close to the pad. Tie the unused channel inputs to a defined voltage within the supply range so that output state stays predictable. This page brings together verified distributor listings, drop-in alternatives across TI and Diodes, pin-level detail and practical layout notes that go beyond the basic orderable-parts listings.

RFC Hubungi kami
LM2903S-13 - Dual 36V Differential Comparator | Diodes
LM2903S-13

LM2903S-13 - Dual 36V Differential Comparator | Diodes

Diodes Incorporated LM2903S-13 is a dual differential comparator in an 8-pin SOIC package, with a 36 V maximum supply rating, 20 mA output current capability, and 25 nA input bias current rating. It contains two independent comparators, allowing one package to provide two separately controlled threshold-detection or level-shifting channels. A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state according to their relationship. Within the broader hierarchy of comparator IC, voltage comparator, analog IC, and semiconductor, the LM2903S-13 is intended for general-purpose signal conditioning, threshold detection, and logic-interface applications. Its dual-channel architecture improves board utilization while keeping the two channels electrically independent. Key features include a 36 V maximum total supply voltage, operation from a single supply or split supplies, and an input common-mode range that includes ground. The open-collector outputs are designed to interface with TTL, MOS, and CMOS logic. Each comparator can drive an external pull-up network, making the device useful when a wired-AND function or level translation is required. The stated 25 nA input bias current supports applications where input bias effects must be controlled. The LM2903 family uses an open-collector output architecture rather than a push-pull or rail-to-rail CMOS output. When the output transistor is off, the output voltage is set by the pull-up resistor and its connected supply. When the output transistor is on, the output approaches ground while remaining within the device's output-current capability. This architecture provides flexibility in interface voltage, but it also requires an external pull-up resistor and suitable attention to pull-up current. Typical applications include two-threshold monitoring, zero-cross detection, sensor-signal conditioning, relay or solenoid drive interfaces, window comparators, and general digital logic level translation. The device can also support dual-polarity sensing when powered from split supplies. Its 8-pin SOIC package is convenient for conventional through-hole assembly and hand rework, although modern high-density designs may prefer a smaller surface-mount package when one is qualified. For reliable operation, keep the total supply voltage within the 36 V rating and observe the absolute maximum input and output limits listed in the manufacturer datasheet. Place the pull-up resistor close to the output net, maintain a continuous ground return, and account for the open-collector output's rise time, which is determined by output capacitance and pull-up resistance rather than by a dedicated push-pull driver. This product page combines the LM2903S-13 device identity, package details, manufacturer-family information, sourcing references, pin-compatible alternatives, and application-oriented design guidance. It is structured to help engineers evaluate the comparator electrically before deciding whether the 8-pin SOIC implementation matches the assembly, protection, interface, and lifecycle requirements of the target design.

RFC Hubungi kami
LM2903ST - Dual Low-Power Comparator, 36V | STMicroelectronics
LM2903ST

LM2903ST - Dual Low-Power Comparator, 36V | STMicroelectronics

The STMicroelectronics LM2903ST is a low-power dual voltage comparator with two independent open-collector comparator channels, operating from a wide single supply of +2 V to +36 V or dual supplies of ±1 V to ±18 V, drawing only 0.4 mA of supply current, and housed in an 8-pin MiniSO surface-mount package. A voltage comparator is an analog integrated circuit that compares two input voltages and drives its output to indicate which input is higher. Comparators sit within the broader amplifier and analog signal-chain hierarchy: comparator -> amplifier IC -> analog IC -> semiconductor. Unlike operational amplifiers, comparators are designed for fast, saturated switching between output states, and the LM2903's open-collector output stage lets the output be pulled to any logic level via an external pull-up resistor, enabling interfacing between different voltage domains. Key features of the LM2903ST include the very wide 2 V to 36 V supply range, which covers 3.3 V, 5 V, 12 V, 24 V, and industrial 36 V rails from a single device; a very low supply current of 0.4 mA that is largely independent of supply voltage (approximately 1 mW per comparator at +5 V); a low input bias current of 25 nA typical; and a low input offset current of ±5 nA typical. The common-mode input range extends to ground, allowing sensing of signals referenced to the negative rail. Technically, the LM2903ST uses a bipolar process optimized for low quiescent power rather than speed. Its open-collector outputs can be wire-ORed, and the device is qualified and characterized for automotive use per AEC-Q100 within the LM2903 family, making it robust across industrial and vehicular temperature environments. Propagation behavior suits threshold detection, level shifting, and slow-to-medium-speed switching rather than high-speed clocking. Typical applications include battery chargers and battery-powered instruments, industrial limit comparators and window detectors, automotive sensor threshold detection, square-wave and relaxation oscillators, and level-shifting interfaces between logic families with different supply rails. When designing with this part, always fit an external pull-up resistor on each output (typically 3 kOhm to 15 kOhm) since the outputs are open collector; also account for input differential voltage limits at high supply rails. This page adds value beyond the manufacturer datasheet by combining verified specifications, drop-in alternatives, practical design notes, and application guidance in a single citable reference. Request current pricing and stock through the Request a Quote form on this page.

RFC Hubungi kami
LM2903TH-13 Dual Differential Comparator | Diodes
LM2903TH-13

LM2903TH-13 Dual Differential Comparator | Diodes

Diodes Incorporated LM2903TH-13 is a dual differential comparator designed for general-purpose analog signal comparison, with two independent comparator channels and an 8-pin TSSOP package. The device operates from 2 V to 36 V, accepts input voltages spanning approximately ±18 V in the dual-supply configuration, and provides a maximum input offset voltage of 7 mV. These characteristics position it for industrial control, sensor interfacing, voltage-threshold detection, and general analog decision-making circuits. A comparator is an analog integrated circuit that compares two input voltages and produces a logic-level output indicating which input is higher. A differential comparator evaluates the voltage difference between its inverting and non-inverting inputs. This function is placed within the hierarchy of comparator integrated circuits, analog signal-processing ICs, semiconductor devices, and electronic control systems. Unlike a general-purpose operational amplifier used primarily for linear amplification, a comparator is optimized for fast, decisive output-state transitions. The LM2903 family provides two channels in one package, reducing component count and PCB space in dual-threshold applications. Its 2 V to 36 V supply capability supports operation from low-voltage analog systems through substantially higher industrial voltage ranges. The 7 mV maximum input offset specification limits the input difference that can be recognized as a deliberate transition, making the device suitable for threshold monitoring when board-level signal integrity and input conditioning are properly controlled. The dual differential architecture allows two independent comparisons within one IC. Each channel can monitor a sensor signal against a reference, supervise a supply rail, or establish an upper and lower control boundary. Its wide operating-voltage range is especially useful where input signals may exceed the nominal supply of a low-voltage controller. The 8-TSSOP package also supports compact surface-mount layouts, although thermal performance and unused-channel handling remain important design considerations. Typical uses include industrial motor-control logic, power-supply supervision, temperature-sensor interfaces, battery monitoring, overvoltage detection, and general-purpose threshold switching. For dual-polarity sensing, the comparator can operate from single or dual supplies. For a single-supply design, the output reference and input signal levels must remain compatible with the supply voltage and the logic thresholds of the following digital device. PCB design should keep sensitive comparison inputs away from switching nodes and high-current return paths. Place input-referenced components close to the corresponding pins, maintain a stable ground reference, and account for input bias current when using high-source-impedance sensors. If only one comparator channel is required, verify the manufacturer's guidance for the unused channel so that it does not introduce unstable behavior or excess switching activity. This product page combines the LM2903TH-13 identification, package information, technical specifications, sourcing workflow, verified drop-in alternatives, and practical comparison guidance. It is intended to help engineers determine whether the dual comparator's voltage range, offset limit, pin compatibility, and surface-mount format match a specific analog-control design.

RFC Hubungi kami
LM2903VDG - Dual 2-36V Open-Collector Comparator | onsemi
LM2903VDG

LM2903VDG - Dual 2-36V Open-Collector Comparator | onsemi

The onsemi LM2903VDG is a dual differential voltage comparator designed for single or split-supply operation over a 2 V to 36 V supply range. Each half of the device provides an open-collector output, rail-to-rail input capability, and independent input and output pins. The component is offered in an 8-pin SOIC package for surface-mount industrial, automotive, and consumer electronic assemblies. A voltage comparator is an analog integrated circuit that compares two input voltages and produces a digital-level indication of their relationship. The LM2903 series belongs to the comparator hierarchy, which also includes the broader category of analog interface ICs. Its two independent channels allow one package to implement two comparison functions while avoiding the common-mode limitations associated with older single-supply comparators. The principal features of the LM2903VDG include two independent precision comparator channels, open-collector outputs suitable for pulling a logic node low, operation from a single 2 V supply or split supplies, and an extended temperature range of -40 °C to 125 °C. Maximum input offset voltage is 15 mV, maximum average input bias current is 0.5 µA, and typical response time is 1.5 µs. The open-collector architecture requires an external pull-up resistor when driving CMOS or other logic families. Each channel contains non-inverting and inverting inputs, an output, and a common power-supply connection. The two channels operate independently, but both share the same package pins for ground and positive supply. Because the outputs are open collectors, they can remain in a high-impedance state until an external pull-up establishes the logic-high voltage. This feature also permits several open-collector outputs to share a bus when the application requires wired logic behavior. Typical uses include automotive sensing interfaces, industrial control and monitoring circuits, battery-powered equipment, consumer electronics, and general-purpose threshold detection. A common example is comparing a divided sensor signal with a reference voltage, where the comparator output indicates whether the measured value is above or below the selected threshold. The 2 V minimum supply permits operation from low-voltage rails, while the 36 V maximum supports applications with higher industrial supply levels. Designers should account for the open-collector output when selecting the pull-up resistor and logic family. The resistor must be small enough to achieve the required output rise time but large enough to limit pull-up current when the transistor is saturated. Input-referred offset and bias-current errors should also be included when the comparator threshold requires high accuracy. This product page combines the exact LM2903VDG ordering information with technical characteristics, verified source links, application guidance, and same-footprint replacement analysis. It is structured to help engineers identify suitability, evaluate alternatives, and plan PCB implementation without overlooking the electrical distinctions that matter in comparator designs.

RFC Hubungi kami
LM2903VDR2G - Dual Open-Collector Comparator | onsemi
LM2903VDR2G

LM2903VDR2G - Dual Open-Collector Comparator | onsemi

The onsemi LM2903VDR2G is a dual independent precision voltage comparator with open-collector outputs, a supply-voltage rating of 2 V to 36 V, and an 8-pin SOIC package. Each comparator can operate from a single supply or from split supplies, while its input common-mode range extends to ground for single-supply threshold detection. The device supports a differential input range of ±18 V, has a response time of 1.5 µs, and offers input offset voltage as low as 2.0 mV. Its open-collector outputs permit wired-AND operation and require an external pull-up resistor. A voltage comparator is an analog integrated circuit that evaluates two input voltages and changes its output state when the difference crosses a defined threshold. In the product hierarchy, the LM2903VDR2G is a comparator, within the broader amplifier and comparator IC family, and ultimately belongs to the semiconductor and analog signal-processing categories. The LM2903 series provides two independent comparison channels in one package, reducing board area compared with two separate single comparators. Key features include independent comparator operation, single or split-supply capability, a common-mode input range extending to ground, and open-collector outputs that support wired-AND logic. The 1.5 µs response time is suitable for threshold monitoring and general-purpose signal conditioning, although it is not optimized for the very low latency required by high-speed edge-detection systems. The manufacturer identifies automotive, industrial, and consumer electronics as suitable application areas. Each channel compares a non-inverting input with an inverting input. The differential input voltage can extend to ±18 V, while the 2 V to 36 V supply rating supports single-rail operation from 2 V through 36 V and split-rail operation with an input range from -1 V through 18 V on either side of ground. The open-collector transistor can sink output current while remaining in a high-impedance state when inactive, so the pull-up resistor determines the output high voltage and limits sink current. Typical applications include battery-voltage monitoring, overvoltage and undervoltage protection, industrial control-interface detection, sensor threshold conditioning, and ground-referenced digital logic interfaces. In each case, the reference network establishes the switching threshold, while the open-collector output can drive a pull-up, relay-driver input, or logic gate. Designers should verify the required output sink current and choose a resistor value that balances current consumption against output rise time. For reliable operation, place the pull-up resistor close to the output and maintain short input traces to reduce sensitivity to injected noise. Check input and output behavior at both supply extremes, confirm that the signal source stays within the common-mode range, and account for offset voltage when defining a precise switching threshold. The manufacturer datasheet is the controlling reference for full electrical limits, test conditions, and connection details. This product page combines the principal LM2903VDR2G specifications, application guidance, drop-in alternatives, and design considerations to support faster component selection and PCB planning.

RFC Hubungi kami
LM2903VN - Dual 36V Open-Collector Comparator | onsemi
LM2903VN

LM2903VN - Dual 36V Open-Collector Comparator | onsemi

The onsemi LM2903VN is a dual, general-purpose voltage comparator with open-collector outputs, rail-to-rail input capability, and a supply-voltage rating of 2 V to 36 V. The device is offered in an 8-pin PDIP package and is qualified for automotive applications with an operating ambient-temperature range of -40°C to +125°C. Each half of the IC contains an independent comparator, allowing two threshold or switching functions to be implemented in one package. A voltage comparator is an analog integrated circuit that compares an input voltage with a reference voltage and changes its output state when the relationship between the voltages changes. Within the broader semiconductor hierarchy, a comparator belongs to the interface and signal-conditioning IC family. It converts a small voltage relationship into a logic-level indication that can be used by control systems, protection circuits, sensing equipment, and industrial automation systems. The LM2903VN is identified as a low-offset-voltage, low-power dual comparator. Its open-collector output architecture requires an external pull-up resistor when the output is used as a wired logic signal. This arrangement permits several open-collector outputs to share a common bus when their pull-up network is designed correctly. The rail-to-rail input designation indicates operation across the full input range covered by the device, while the 2 V to 36 V supply rating supports operation from low-voltage logic systems through higher-voltage industrial applications. Automotive qualification and the -40°C to +125°C ambient-temperature range make the LM2903VN relevant to temperature-tolerant control and monitoring circuits. The dual configuration can reduce component count when a design requires independent positive and negative threshold decisions, two sensor-limit channels, or complementary logic outputs. Because the two comparators are independent, they can also be used with different input networks, reference voltages, and output pull-ups within the ratings of the device. Typical design roles include supply sequencing, overvoltage indication, sensor-threshold detection, window monitoring, and general digital control. The 8-pin PDIP package favors through-hole assembly and conventional prototyping. PCB layout should keep input and feedback traces short, place the input bypass capacitor close to the supply pins, and route high-current or switching-node copper away from the comparator inputs to reduce false transitions. This page combines the manufacturer-device identification, package and operating information with engineering guidance for threshold design, open-collector interfacing, automotive use, and PCB implementation. It also provides comparison and replacement guidance intended to help engineers evaluate board-level alternatives without overlooking supply-voltage, common-mode, output-stage, and package differences.

RFC Hubungi kami
LM2903VQDR - Dual Differential Comparator | Texas Instruments
LM2903VQDR

LM2903VQDR - Dual Differential Comparator | Texas Instruments

Texas Instruments LM2903VQDR is a dual differential comparator with open-collector outputs, a 2 V to 36 V supply range, and an operating temperature range of -40°C to +125°C, housed in an 8-pin SOIC (D) package. Each channel compares one differential input pair and provides an open-collector output suitable for wired logic, relay drive, and industrial sensing circuits. A differential comparator is an analog integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. The LM2903V belongs to the comparator hierarchy: differential comparator, voltage comparator, analog comparator, and ultimately semiconductor. Its two channels allow one packaged device to perform two independent threshold decisions, reducing component count when a system requires multiple sensing or control functions. The device operates from a 2 V minimum supply to a 36 V maximum supply, giving it broad compatibility with industrial control voltages. The distributor specifications identify an input bias current of 0.5 nA and a supply current of 0.8 mA. Its open-collector outputs can sink output current from external pull-up circuitry, and the 8-pin SOIC package supports conventional surface-mount assembly and automated inspection. The enhanced-voltage LM2903V family is intended for applications that benefit from wide supply-voltage operation and low input bias current. A high-impedance input stage can limit loading on slow sensor signals, while the open-collector output provides flexibility in voltage-domain interfacing. Because the output transistor is open, the external pull-up voltage can be selected independently within the design's logic constraints. Typical uses include industrial process-limit detection, automotive and battery-powered control systems, motor and relay interfaces, window-comparator circuits, and low-frequency sensor conditioning. In a threshold circuit, one input can receive the sensed voltage and the other can receive a reference. The output changes state when their relationship crosses the configured threshold, allowing the result to drive another logic stage or an external transistor. Design the pull-up network carefully because it determines output voltage, rise time, and available sink current. Place the pull-up resistor close to the open-collector output, keep comparator inputs away from switching-current paths, and provide a stable reference with low noise when threshold accuracy matters. The open-collector pins can also be tied together for wired-AND behavior when the circuit requires multiple fault signals to share one node. This product page combines device specifications, application guidance, drop-in replacement options, and parameter-by-parameter comparison information. It helps engineers determine whether the LM2903VQDR's voltage range, low input bias current, open-collector interface, and extended temperature coverage match the mechanical and electrical requirements of a specific PCB design.

RFC Hubungi kami
LM2903VQDRG4 - Dual 36V Open-Collector Comparator | TI
LM2903VQDRG4

LM2903VQDRG4 - Dual 36V Open-Collector Comparator | TI

The Texas Instruments LM2903VQDRG4 is a dual differential comparator with two independent comparator channels, a 2 V to 36 V supply-voltage range, and an open-collector output configuration. The device is packaged in an 8-pin SOIC package and is specified for operation from -40 °C to 125 °C. Typical input offset voltage is 15 mV, response time is 1.3 microseconds, and supply current is 1 mA. A differential voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the difference between them crosses a defined threshold. The LM2903 family belongs to the comparator hierarchy within the broader amplifier and signal-conditioning IC category. Its differential inputs allow it to detect positive or negative voltage relationships, while the open-collector output supports wired logic, relay drivers, and interface functions. The LM2903VQDRG4 provides two independent comparators within one package. Each channel can operate from a single supply or from dual supplies when the total supply span and positive-to-negative rail requirements are satisfied. Open-collector outputs require an external pull-up resistor and can be connected to a common bus when only one output is active at a time. This arrangement is useful when multiple sensing channels must share a digital or microcontroller input. Key electrical characteristics include a 2 V to 36 V total supply range, 15 mV input offset voltage, 1.3 microsecond response time, and 1 mA supply current. The enhanced-voltage LM2903V version supports operation up to 36 V, which gives designers additional margin for industrial supply transients and automotive-style sensing environments when the board-level protection and operating requirements are appropriate. Typical uses include overvoltage and undervoltage detection, sensor threshold conditioning, industrial control interfaces, battery monitoring, window or level sensing, and general digital threshold detection. Two independent channels can also be used separately for a high-side and low-side limit, a differential sensor monitor, or a pair of unrelated comparator functions. For PCB implementation, keep input and output traces short, provide a stable reference or return path, and place the required pull-up resistor close to the open-collector output. Account for input common-mode limits when the inputs can move outside the supply rails. Stable bypass capacitance near the supply pins helps reduce supply noise and output disturbance. This product page combines the manufacturer device data, package information, compatibility details, application guidance, and practical design notes needed to evaluate the LM2903VQDRG4 before PCB design, sourcing, or replacement planning.

RFC Hubungi kami
LM2903VQDRG4Q1 - 36V Automotive Dual Comparator | Texas Instruments
LM2903VQDRG4Q1

LM2903VQDRG4Q1 - 36V Automotive Dual Comparator | Texas Instruments

The Texas Instruments LM2903VQDRG4Q1 is an automotive dual differential comparator with two independent open-collector outputs, a 2 V to 36 V single-supply operating range, and operation from dual supplies of ±18 V. Each comparator supports rail-to-rail input operation, and the device is available in an 8-pin SOIC package rated for AEC-Q100 Grade 0 and Grade 1 automotive applications. Typical supply-current consumption is 0.4 mA per comparator. A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the difference crosses a selected threshold. The LM2903 family combines two independent comparators in one package, providing greater functional flexibility than a single comparator while requiring only one device. Its open-collector outputs can sink current and support wired logic, lamp drivers, or interface with pull-up resistors and external transistors. Automotive qualification is the principal differentiator of the LM2903VQDRG4Q1. The device is qualified to AEC-Q100 Grade 0 and Grade 1, and the manufacturer documentation identifies ESD protection exceeding 1000 V under MIL-STD-883, Method 3015 and exceeding 100 V with the machine model. The dual architecture supports single-supply operation from 2 V to 36 V or split-supply operation where the total supply difference remains within the device rating. Each channel has its own differential input pair, output, and output-strobe capability. The input common-mode range extends across the supply rails, allowing the comparator to monitor low-level sensor signals without separate input protection in many applications. Open-collector outputs avoid push-pull output contention, but they require a pull-up resistor when a logic-high output voltage is required. Typical propagation delay is listed at 0.3 microseconds for the automotive variant. Typical uses include battery monitoring, automotive sensor conditioning, window and seat-position sensing, overvoltage detection, fan control, and industrial control modules. The dual supply capability is useful in systems with positive and negative rails, while the wide single-supply range accommodates 5 V, 12 V, and 24 V automotive electrical environments. The device should be paired with input filtering where noisy signals could cause repeated output transitions. Layout and stability require attention near the supply pins. Place the supply bypass capacitor close to pin 8 and the ground connection close to pin 4, keep comparator inputs away from output and supply traces, and connect open-collector pull-ups to a compatible logic rail. Check absolute maximum voltage limits, input common-mode range, output-current capability, and the pull-up voltage before finalizing the external circuit. This page combines automotive qualification, operating limits, package details, lifecycle information, and drop-in family alternatives with practical PCB and application guidance. It is intended to help engineers select or replace the LM2903VQDRG4Q1 in 8-pin SOIC designs while accounting for supply architecture, output loading, and automotive qualification requirements.

RFC Hubungi kami
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1

LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments

Texas Instruments LM2903VQDRQ1 is a dual differential comparator rated for a 2 V to 36 V supply, operating from -40 °C to +125 °C in an 8-pin SOIC package. The device provides two independent comparison channels with open-collector outputs compatible with TTL, MOS, and CMOS logic. It is qualified to AEC-Q100 Grade 0 and Grade 1 for automotive applications. A comparator is a differential amplifier whose output indicates whether its non-inverting input is above or below its inverting input. The LM2903VQDRQ1 belongs to the comparator hierarchy within analog and mixed-signal integrated circuits. Its high-voltage supply tolerance and automotive qualification make it suitable for monitoring 12 V and 24 V vehicle electrical systems, where input signals can exceed conventional logic supply levels. The LM2903VQDRQ1 supports single-supply operation from 2 V to 36 V or dual-supply operation from ±1 V to ±18 V. Each channel includes an inverting input, a non-inverting input, and an open-collector output. The open-collector architecture requires an external pull-up resistor and permits the output to be pulled up to a logic voltage different from the comparator supply. Supply-current drain is specified as 0.4 mA, supporting low-power monitoring systems. The differential input-voltage range extends to the maximum-rated supply voltage, while the common-mode input range includes ground. These characteristics support threshold detection, overvoltage and undervoltage detection, sensor conditioning, and automotive signal monitoring. The open-collector outputs can sink external-device current when the comparison state is active, while the pull-up network establishes the inactive high state. A typical propagation delay of approximately 1.3 µs is appropriate for general-purpose control rather than high-speed edge detection. Typical uses include battery-pack protection, automotive power-rail supervision, industrial control thresholds, window and sensor-limit comparisons, and interface logic for open-collector buses. In vehicle systems, the wide supply range allows a comparator to operate directly from protected battery-related rails when the preceding circuit provides suitable transient protection. In process-control equipment, the comparator can supervise a transducer signal and provide a pulled-up logic indication to a controller. Design the pull-up resistor to balance output rise time, switching current, power consumption, and the sink-current rating of the open-collector output. Keep the two comparison channels independent even when they share the supply pins. Provide stable supply decoupling close to the device, route sensitive input traces away from switching nodes, and use the manufacturer's pin-description table when assigning PCB tracks. Automotive implementations should also include the transient-protection and layout measures required by the completed vehicle interface. This product page combines the exact ordering information, manufacturer specifications, pin arrangement, drop-in replacement analysis, application guidance, and engineering design notes needed to evaluate the LM2903VQDRQ1 before it is assigned to a PCB or placed on a bill of materials.

RFC Hubungi kami
LM2903VQPWR - Dual 36V Comparator | Texas Instruments
LM2903VQPWR

LM2903VQPWR - Dual 36V Comparator | Texas Instruments

Texas Instruments LM2903VQPWR is a dual differential comparator containing two independent voltage comparators, a 2 V to 36 V operating-voltage range, and open-collector outputs in an 8-pin TSSOP (PW) package. The device supports single-supply operation and dual-supply operation when the total supply span and voltage relationship meet its operating limits. A dual comparator is an analog integrated circuit that compares two input voltages and produces a digital-level output indicating which input is higher. As a comparator within the broader analog IC and semiconductor hierarchy, the LM2903VQPWR provides the conversion of small analog voltage differences into logic-compatible decisions. Its two independent channels can monitor two thresholds, or they can be combined for window comparison and other system-level functions. The principal features include two independent comparators, a wide 2 V to 36 V supply range, rail-to-rail input capability, open-collector outputs, and an operating temperature range of -40°C to +125°C. The open-collector outputs require an external pull-up resistor and allow several outputs to be connected for wired-AND behavior. This architecture is useful when driving open-drain logic, relay interfaces, or indicators with a compatible pull-up voltage. The LM2903 family is designed for general-purpose comparison rather than continuous analog amplification. Each channel compares an inverting input with a non-inverting input, while its output changes state according to the input relationship. Rail-to-rail input behavior allows the input voltages to approach the supply rails, although common-mode and output-state details should be checked against the manufacturer datasheet for the exact operating conditions. Typical uses include threshold detection, industrial sensor interfaces, overvoltage and undervoltage monitoring, control-system signal conditioning, and open-collector logic interfaces. The 8-pin TSSOP package supports compact surface-mount layouts, while the -40°C to +125°C temperature range makes the device suitable for industrial and automotive-style environments when the complete system requirements support that operating range. For PCB design, reserve the pull-up network required by the open-collector outputs and keep comparator input routing away from high-current switching paths. Account for input common-mode limits, output pull-up voltage, supply decoupling, and logic thresholds in the connected system. The manufacturer pin-description table should be used directly when assigning PCB tracks and confirming the numbering of the PW package. This product page consolidates the core electrical characteristics, replacement options, application guidance, and package-level design considerations into a practical selection reference. It also provides a parameter-by-parameter comparison that helps engineers distinguish standard, automotive, and lead-free orderable variants before committing to a PCB footprint.

RFC Hubungi kami
LM2903VQPWRG4 - 18V Dual Open-Collector Comparator | TI
LM2903VQPWRG4

LM2903VQPWRG4 - 18V Dual Open-Collector Comparator | TI

Texas Instruments LM2903VQPWRG4 is a dual general-purpose differential comparator with an 18 V supply rating, open-collector outputs, rail-to-rail input capability, and 0.3 microsecond response time in an 8-TSSOP package. The device contains two independent comparator channels and supports single-supply or split-supply operation. A comparator is an analog integrated circuit that evaluates two input voltages and changes its output state according to their relationship. The LM2903 belongs to the comparator hierarchy, where a differential comparator feeds logic-level decision circuits, sensor interfaces, threshold detectors, and industrial control equipment. Its rail-to-rail input behavior is particularly useful when sensing signals near the supply rails. Key features include a low typical supply-current drain of 0.4 mA per comparator, an 18 V maximum supply rating, and 0.3 microsecond response time. The open-collector outputs allow the output node to be pulled up to the system logic voltage, providing flexible voltage-level interfacing. The two channels operate independently, permitting one package to implement two comparison functions or two separated threshold decisions. The V-suffix LM2903 family supports a wide range of supply voltages and retains operation from single or dual supplies. Its common-mode input range can extend close to the supply rails, while the open-collector outputs can sink external-device current when the comparison result is low. These characteristics make the comparator suitable for both low-voltage sensing systems and higher-voltage industrial interfaces. Typical applications include industrial process-limit detection, power-supply sequencing, sensor threshold conditioning, battery monitoring, and overvoltage or undervoltage protection. Two channels can also implement a window comparator by comparing an input signal against separate upper and lower reference thresholds. The 8-TSSOP footprint supports compact surface-mount layouts where channel density and PCB area are important. When designing around the LM2903VQPWRG4, add a pull-up resistor to each open-collector output and account for the output leakage and sink-current limits when choosing its logic level. Keep input and output routing compact, maintain adequate supply decoupling, and verify that all sensed voltages remain within the device's operating limits. This page combines manufacturer specifications, pin-level guidance, drop-in alternatives, application analysis, and design considerations to support faster component selection and PCB implementation.

RFC Hubungi kami
LM2903VQPWRG4Q1 - 30V Dual Comparator | Texas Instruments
LM2903VQPWRG4Q1

LM2903VQPWRG4Q1 - 30V Dual Comparator | Texas Instruments

The Texas Instruments LM2903VQPWRG4Q1 is an automotive dual differential comparator with two independent open-collector channels, a 30 V maximum supply voltage, and an 8-pin TSSOP package. The LM2903VQPWRG4Q1 supports single-supply or dual-supply operation and is qualified to AEC-Q100 Grade 0 and Grade 1 for automotive electronics. A comparator is an analog integrated circuit that compares two input voltages and changes its output state when the non-inverting input rises above the inverting input. The differential comparator belongs to the broader comparator, analog IC, and semiconductor hierarchies. It is commonly used for threshold detection, overvoltage and undervoltage monitoring, sensor conditioning, and converting analog levels into digital logic signals. The device provides lower offset voltage, higher supply-voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance than earlier LMx93-family devices. Typical input offset voltage is no more than 7 mV at 25°C, supply current is 0.4 mA per comparator, and nominal response time is 1.3 microseconds. Its open-collector outputs allow wired logic, pull-up resistors, and level translation to the supply voltage used by the receiving logic. Each channel has independent noninverting and inverting inputs, so the two comparators can monitor separate signals or implement two thresholds. The common-emitter open-collector output sinks current from an external pull-up and naturally goes to a high-impedance state when the comparator is inactive. Because the output stage is not push-pull, output rise time depends on the pull-up resistor, total bus capacitance, and leakage current rather than only on internal drive strength. Typical uses include automotive battery monitoring, sensor threshold detection, industrial control inputs, overvoltage and undervoltage protection, and signal conditioning between analog sensors and digital controllers. Single-supply operation simplifies power architecture, while dual-supply operation allows inputs and output pull-ups to reference different voltage domains. The wide 30 V supply range also accommodates 12 V and 24 V automotive electrical environments when the absolute maximum ratings and transient requirements are respected. For PCB design, keep the comparator inputs and power-ground return paths compact, connect the exposed-decoupling route to a low-impedance ground plane, and place the output pull-up resistor near the driven logic input. Avoid routing sensitive input traces beside power outputs or long pull-up traces. Input protection may be required in external automotive connectors, and production designs should validate the complete system for conducted noise, ESD events, supply transients, and open-collector pull-up compatibility. This page combines exact ordering information, automotive qualification details, drop-in comparator choices, application-specific engineering guidance, and a parameter comparison to help engineers select and implement the LM2903VQPWRG4Q1 correctly.

RFC Hubungi kami
LM2903VQPWRQ1 - Dual 36V Automotive Comparator | Texas Instruments
LM2903VQPWRQ1

LM2903VQPWRQ1 - Dual 36V Automotive Comparator | Texas Instruments

The Texas Instruments LM2903VQPWRQ1 is a dual general-purpose differential comparator in an 8-pin TSSOP package, qualified to AEC-Q100 Grade 0 and Grade 1 for automotive applications. It provides two independent open-collector outputs, operates from single or dual supplies, and supports supply-voltage differences from 2 V to 36 V when used with dual supplies. The typical supply-current drain is 0.4 mA per comparator. A comparator is an analog integrated circuit that evaluates a voltage at its non-inverting input against a voltage at its inverting input and switches its output according to the polarity of that difference. The LM2903 family belongs to the broader hierarchy of differential comparator, analog comparator, linear integrated circuit, and semiconductor. Its open-collector outputs allow the output stage to be pulled up to a local supply or logic rail, providing flexibility for wired-AND arrangements and direct interfacing with TTL, MOS, or CMOS-compatible circuitry. The V-enhanced LM2903-Q1 family is designed for cost-sensitive applications requiring wide supply tolerance, low supply-current drain, and automotive qualification. According to the manufacturer product page, the device offers improved low-offset voltage, higher supply-voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance compared with earlier LM293, LM393, and LM2903 families. The improved 2 kV ESD capability is especially relevant to chassis-connected and cable-driven automotive systems. Typical uses include battery monitoring, threshold detection, overvoltage and undervoltage protection, window comparators, motor-control interfaces, and signal conditioning. Because each half of the device operates independently, one package can implement two unrelated comparison functions. This reduces component count while preserving separate inputs and outputs for each channel. For PCB design, keep the two comparator channels away from high-current switching paths and high-impedance input traces where practical. Place input-referenced components close to their associated pins, provide an uninterrupted ground return, and use pull-up resistors on both open-collector outputs. Confirm the pull-up voltage, output-sink current, input common-mode range, and supply limits against the manufacturer datasheet before fixing the external component values. This page consolidates the device specification, drop-in alternatives, package-level comparison data, and practical PCB guidance into a design-focused reference. It also identifies which automotive and electrical details must be confirmed in the official manufacturer documentation before production release.

RFC Hubungi kami
LM2903WDT - Dual Open-Collector Comparator | STMicroelectronics
LM2903WDT

LM2903WDT - Dual Open-Collector Comparator | STMicroelectronics

The STMicroelectronics LM2903WDT is a low-power dual differential voltage comparator with an open-collector output configuration, supplied in an 8-pin SOIC package. The device combines two independent comparator channels, a typical supply current of 0.4 mA, input offset current of 25 nA, and an input offset voltage of 250 mV. Its rail-to-rail input capability and low-power operation make it suitable for general-purpose analog signal conditioning, threshold detection, and industrial control circuits. A voltage comparator is an analog integrated circuit that compares one input voltage with another and changes its output state when the differential input crosses a switching threshold. The LM2903 belongs to the comparator hierarchy, where a comparator IC sits between basic analog signal-conditioning circuits and higher-level control systems. Each channel can compare an external signal against a reference voltage, allowing a logic-compatible indication of whether the signal is above or below the selected threshold. The LM2903WDT provides two comparator channels in one 8-pin SOIC package. Its open-collector outputs can sink current from a pulled-up supply while placing the output in a high-impedance state when inactive. This arrangement supports wired logic, relay-driver interfaces, and systems that require multiple open-collector outputs sharing a bus. The low 0.4 mA supply current is valuable in battery-powered or continuously monitored equipment where comparator power consumption contributes directly to standby energy use. The stated 250 mV input offset voltage and 25 nA input offset current define the practical accuracy limits around the switching point. Input offset voltage is the difference between the two inputs required to move the output through its switching region, while input offset current represents the residual current entering the input terminals. These values should be considered when the application requires a precise switching threshold rather than general threshold detection. Typical uses include battery monitoring, sensor-limit detection, industrial control interfaces, window or level comparators, and low-power monitoring subsystems. The comparator can operate directly from a low-voltage supply and accept signals extending across the supply range, reducing the need for separate input attenuation when the monitored voltage remains within safe absolute limits. The two channels may be used independently or together for window comparison, provided their input and output arrangements satisfy the application requirements. Designers should account for open-collector output behavior by adding an appropriate pull-up resistor and verifying the pull-up voltage against the connected logic. Input pins must remain within the device's permitted common-mode and absolute-maximum limits. Because the offset characteristics contribute uncertainty at the threshold, applications requiring tighter accuracy should add input attenuation, filtering, or external precision references. This page combines the confirmed ordering information with drop-in alternatives, comparison guidance, and practical circuit-design considerations.

RFC Hubungi kami
LM2903WHYST - Dual Low-Power Voltage Comparator | STMicroelectronics
LM2903WHYST

LM2903WHYST - Dual Low-Power Voltage Comparator | STMicroelectronics

The STMicroelectronics LM2903WHYST is a low-power dual voltage comparator containing two independent comparator channels, a 2 V to 36 V single-supply operating range, and an 8-MiniSO package. Each channel provides an open-collector output, allowing the outputs to be pulled up to a compatible logic supply and used in wired-AND arrangements when connected together. A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state according to their relationship. The dual comparator in the LM2903WHYST can perform two independent threshold, window, or level-detection functions. In the power-management hierarchy, this device belongs to the comparator family within amplifier and signal-conditioning integrated circuits. It is intended for low-power sensing where the output must interface with TTL, CMOS, or other digital logic. The principal electrical features include a wide single-supply range of 2 V to 36 V, dual-supply operation from ±1 V to ±18 V, and very low supply current of 0.4 mA independent of supply voltage. The manufacturer documentation also lists a typical input bias current of 25 nA, typical input offset current of ±5 nA, an input common-mode range that includes the negative rail, and a typical low output saturation voltage of 250 mV at 4 mA output current. Each comparator consumes approximately 1 mW when operated from 5 V. The open-collector architecture requires an external pull-up resistor. When the output transistor turns off, the resistor raises the output toward the logic supply; when it turns on, the output is pulled toward ground. The differential input voltage can be large enough for the comparator to be used as a Schmitt trigger or line receiver, while the low quiescent current supports battery-powered equipment. Open-collector outputs can also be wired together, but the resulting common output requires careful pull-up selection and fault-current analysis. Typical uses include industrial sensor interfaces, battery monitoring, overvoltage and undervoltage detection, motor-control thresholds, and general logic-level sensing. The LM2903WHYST is particularly appropriate where two independent decisions are required and where a low-current open-drain interface is preferable to a rail-to-rail push-pull output. In a battery-powered design, the 0.4 mA supply current helps limit continuous overhead, while the broad supply range supports operation from low-voltage cells through industrial rails. Designers should select the external pull-up resistor according to the required logic level, output rise time, and leakage current. The pull-up must connect to a supply that remains within the output ratings of the comparator and the receiving logic device. Input source impedance should remain low enough to prevent bias-current-induced offset errors, and unused comparator channels should be configured according to the manufacturer recommendations rather than left floating. This product page combines the manufacturer's electrical characteristics with package, application, and replacement guidance. It also identifies verified same-package alternatives where pin compatibility can be established, helping engineers shorten qualification work while preserving the electrical behavior of the original LM2903WHYST design.

RFC Hubungi kami
LM2903WYDT - Dual 2-36V Low-Power Comparator | STMicroelectronics
LM2903WYDT

LM2903WYDT - Dual 2-36V Low-Power Comparator | STMicroelectronics

The STMicroelectronics LM2903WYDT is a dual low-power voltage comparator with two independent channels, a 2 V to 36 V single-supply operating range, approximately 400 uA power consumption, and 25 nA typical input offset voltage in an 8-pin SOIC package. It is designed for industrial threshold detection, sensing, and open-collector interface applications that require wide supply-voltage tolerance. A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The LM2903 belongs to the comparator hierarchy, within analog signal conditioning and interface ICs. Its open-collector outputs can pull external buses or logic inputs down, while external pull-up resistors establish the high output state. Each comparator operates independently, allowing one package to implement two sensing functions. Key features include a wide 2 V to 36 V supply range, low typical quiescent current of 0.4 mA, and a typical input offset voltage of 25 nA. The open-collector output supports wired logic, relay or solenoid interfaces, and compatibility with multiple logic families when suitable pull-up components are used. The SOIC-8 surface-mount package keeps the dual-channel implementation compact while supporting automated board assembly. The two channels provide common-mode input range and input-offset behavior suited to precision threshold detection. Because the outputs are open collector, the transition speed depends partly on output load capacitance, the external pull-up resistance, and the pull-up voltage. Designers should account for these external factors when setting propagation-delay requirements or operating the outputs at high bus speeds. Typical uses include battery-powered monitoring, industrial sensor interfaces, window or level comparison, power-good detection, overvoltage and undervoltage protection, and general-purpose control logic. The broad supply range is especially useful in equipment operating from regulated low-voltage rails or from higher industrial supply rails after suitable protection and decoupling. For reliable operation, place the supply bypass capacitor close to the device, use a pull-up resistor on each open-collector output, and verify that input and output absolute-maximum limits are not exceeded during power transitions. Check input common-mode range and differential input limits against the actual signal excursion, and confirm that the external pull-up voltage remains within the output-pin rating. This product page combines the manufacturer device description, distributor package information, technical characteristics, qualified drop-in alternatives, and practical interface guidance. It supports faster component selection while preserving the pin, voltage, and output-configuration checks required for production designs.

RFC Hubungi kami
LM2903WYPT - Dual Low-Power Comparator, 36V, TSSOP-8 | ST
LM2903WYPT

LM2903WYPT - Dual Low-Power Comparator, 36V, TSSOP-8 | ST

The STMicroelectronics LM2903WYPT is a low-power dual voltage comparator featuring two independent comparator channels with open-collector outputs, rated for supply voltages from 2V to 36V (or 1V to 18V split supplies), housed in an 8-pin TSSOP package with an operating temperature range of -40C to +125C. A voltage comparator is an analog building block that compares two input voltages and drives its output to indicate which input is higher. Comparators sit within the broader amplifier IC family, alongside op-amps and difference amplifiers, and form a core part of analog signal conditioning chains in power management, sensing, and control systems. The LM2903 family is one of the most widely used comparator families in the industry, valued for single-supply operation and wide voltage tolerance. The LM2903WYPT key features include a wide 2V to 36V single-supply operating range, very low input bias current of 250 nA (typical family figure), and open-collector outputs that support wired-OR configurations and level shifting to logic rails up to 36V. The W-grade variant adds enhanced robustness targeted at automotive and industrial environments, and the part is AEC-Q100 qualified, making it suitable for vehicle-level electronics where reliability over temperature is mandatory. Technically, the device operates from a single supply over a wide voltage range, and operation from split supplies is also possible. The input common-mode range includes ground, allowing the comparator to sense signals near 0V without additional biasing circuitry. The low supply current draw per comparator makes it suitable for battery-powered designs, while the open-collector stage requires an external pull-up resistor to define the output logic level. Typical applications include automotive sensor interfaces and threshold detection, overvoltage and undervoltage supervision in industrial power supplies, window comparators in battery chargers and motor control feedback, and limit detection in consumer and instrumentation circuits where a low-cost, rugged dual comparator is required. When designing with this device, remember to fit a pull-up resistor on each open-collector output; without it, the output cannot reach a defined high state. Input and output voltages should never be taken below the negative supply rail, and response time must be budgeted against the low-power biasing. This page synthesizes distributor listings, drop-in same-family alternatives, AEC-Q100 qualification status, and practical design guidance in one place, going beyond the information found on a typical distributor product card.

RFC Hubungi kami
LM2903XK - Dual Open-Drain Comparator | Runic Technology
LM2903XK

LM2903XK - Dual Open-Drain Comparator | Runic Technology

Runic Technology LM2903XK is a dual-channel, general-purpose voltage comparator with open-drain outputs, supplied in an 8-pin SOIC package. The device is intended for industrial control and consumer-electronics circuits that compare two input voltages and require a digital, low-side output for interfacing with pull-up-based logic systems. Its dual-channel architecture allows two independent threshold comparisons in one package. A voltage comparator is a semiconductor that evaluates the relationship between two voltages and changes its output state when one input crosses the other. The comparator category belongs to the broader signal-conditioning and interface-IC hierarchy, where an analog voltage decision is converted into a logic-compatible event. The LM2903XK open-drain output can support wired logic, system monitoring, threshold detection, and control functions when paired with an appropriate pull-up resistor. The LM2903XK provides two comparator channels, open-drain output structures, and an 8-SOIC package identified as SOIC-8 with a 0.154-inch, 3.90 mm width. PartGenie classifies the device for industrial-control and consumer-electronics applications. Its listed environmental-handling classification is MSL 3 for 168 hours, while its compliance records identify RoHS3 compliance and no REACH impact. Because the output is open drain, each channel can pull its output node to a defined logic-low state but cannot actively drive a logic-high state. A pull-up resistor or compatible pull-up network is therefore required. This arrangement provides useful flexibility because the output can be referenced to a supply selected by the system designer, while multiple open-drain outputs can share a bus when the electrical conditions and device limits permit. Typical uses include monitoring a power rail against a reference, detecting sensor thresholds, generating reset or fault signals, comparing two analog signals, and implementing simple control loops. The dual-channel format is especially useful when a system requires two related decisions, such as an upper-limit detector and a lower-limit detector, without using separate single-channel packages. The primary PCB considerations are pin orientation, input common-mode limits, output pull-up values, and the voltage and current ratings of the open-drain nodes. Designers should use the manufacturer datasheet pin-description table and electrical characteristics before finalizing input ranges, output sink-current limits, supply limits, and decoupling requirements. A local ground-reference arrangement is important for stable comparator behavior. This product page consolidates the LM2903XK function, package information, compliance records, verified source links, and application guidance. It also identifies confirmed package-related alternatives and clearly separates them from unverified or differently packaged options so that engineers can assess PCB compatibility before making a replacement decision.

RFC Hubungi kami
LM2903YDT - Dual 36V Comparator, SOIC-8 | STMicroelectronics
LM2903YDT

LM2903YDT - Dual 36V Comparator, SOIC-8 | STMicroelectronics

The STMicroelectronics LM2903YDT is a low-power dual differential voltage comparator with two independent open-collector outputs, a single-supply operating range of +2 V to +36 V, and an 8-pin SOIC package. It is designed for general-purpose signal comparison over wide supply-voltage and input-voltage ranges, making it suitable for industrial, automotive, and embedded control systems. A voltage comparator is an analog interface that compares two input voltages and produces a digital logic result indicating which input is higher. The LM2903 belongs to the comparator hierarchy, which includes differential comparators, analog interface ICs, and semiconductor signal-conditioning devices. Its two independent channels allow one package to perform two separate threshold, sorting, level-detection, or overvoltage-monitoring functions without sharing internal circuitry between channels. Key characteristics include a supply current of 0.4 mA, low input bias current of 25 nA typical, input offset current of ±5 nA typical, and operation from +2 V to +36 V with a single supply or ±1 V to ±18 V with dual supplies. The open-collector outputs allow wired-AND logic and require an external pull-up resistor. Low input current is especially useful when sensing high-impedance sensors because it reduces the input burden and allows the source impedance to determine practical sensitivity. The device compares two differential inputs without saturating at either supply rail. This rail-to-rail comparison behavior supports designs in which the sensed signal approaches ground or the positive supply. Because the outputs are open collector, external pull-ups can establish the logic voltage independently of the comparator supply, allowing interfacing with TTL, CMOS, MCU inputs, relay drivers, or other open-collector loads. The low 0.4 mA supply current also keeps comparator overhead low in continuously powered equipment. Typical applications include industrial sensor thresholding, motor and valve control, battery monitoring, overvoltage detection, window-comparator functions, and digital control systems. The automotive-qualified LM2903YDT variant is particularly appropriate for vehicle electronic modules requiring a wide supply range, low quiescent current, and robust open-collector signaling. Its SOIC-8 package supports conventional reflow assembly and provides adequate pin spacing for straightforward routing. Designers should account for open-collector output behavior, input common-mode range, offset voltage, propagation delay, and supply decoupling. Place the supply bypass capacitor close to the device and use pull-up resistors that satisfy the required rise time without excessive switching current. Verify the selected logic family’s input thresholds and check the comparator’s response time against the application’s switching requirements. This page combines the manufacturer specifications with practical interface guidance, package-aware alternatives, and a parameter-by-parameter comparison. It is intended to help engineers determine whether the LM2903YDT fits a particular dual-comparator design and whether a same-footprint replacement is electrically acceptable.

RFC Hubungi kami