Produk (44,000+)

MAX3221EEAE+TG1Z - 250kbps RS-232 Transceiver | Analog Devices
MAX3221EEAE+TG1Z

MAX3221EEAE+TG1Z - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EEAE+TG1Z is a single-supply EIA/TIA-232 RS-232 transceiver with one driver and one receiver, operating from 3.0V to 5.5V, supporting data rates up to 250kbps, and featuring enhanced electrostatic discharge protection rated at plus or minus 15kV. The device is packaged in a 16-pin SSOP package and includes automatic shutdown and wake-up features. An RS-232 transceiver is an interface IC that translates logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic levels. It belongs to the broader hierarchy of interface ICs, serial transceivers, communication interfaces, and semiconductor devices. The MAX3221EEAE+TG1Z is intended for equipment that needs one serial channel with low supply voltage, automatic power management, and stronger ESD protection than a basic RS-232 interface. The principal features include a 3.0V to 5.5V operating supply range, operation at up to 250kbps, a 1uA shutdown current, plus or minus 15kV ESD protection, and automatic shutdown and wake-up. These characteristics suit compact industrial controls, test equipment, point-of-sale terminals, and embedded serial ports. The single driver and single receiver arrangement also makes the MAX3221 a compact choice when one RS-232 link is sufficient. MAX3221E-family devices use charge-pump circuitry to generate the positive and negative voltage levels required by RS-232, allowing operation from a single low-voltage supply. The automatic shutdown function reduces supply current when the interface is inactive, while wake-up support helps the system recover without continuous high-power operation. The 16-pin SSOP outline supports conventional surface-mount assembly and compact board layouts. Typical applications include industrial serial adapters, programmable-logic-controller communication, barcode and point-of-sale equipment, instrumentation, and embedded control systems. For designs using a 3.3V or 5V logic supply, the MAX3221EEAE+TG1Z can provide a protected RS-232 connection without a separate negative power rail. Its one-channel architecture should be selected when the system does not require multiple RS-232 drivers or receivers. The main design consideration is ensuring that the external charge-pump capacitors, transceiver signal lines, and logic-side connections follow the pin-description and application-circuit guidance in the manufacturer datasheet. Place the charge-pump capacitors close to their specified pins and preserve the recommended protection-network arrangement on external RS-232 connectors. Confirm that the selected logic levels and supply voltage match the host controller. This page combines the manufacturer product information, package details, verified comparison candidates, and practical interface-design guidance. It also identifies where detailed pin assignments, environmental ratings, and lifecycle-specific technical parameters should be confirmed in the official MAX3221 documentation.

RFC Hubungi kami
MAX3221EEAE-T - 250kbps RS-232 Transceiver | Analog Devices
MAX3221EEAE-T

MAX3221EEAE-T - 250kbps RS-232 Transceiver | Analog Devices

Analog Devices MAX3221EEAE-T is a 3.0V to 5.5V powered RS-232 transceiver with one driver, one receiver, automatic shutdown and wakeup, and ±15kV ESD protection in a 16-pin SSOP package. It supports data rates up to 250kbps and is packaged for tape-and-reel production handling. An RS-232 transceiver is an interface IC that converts logic-level serial signals between a host or controller and the voltage-defined RS-232 bus. The MAX3221EEAE-T belongs to the RS-232 interface hierarchy, where a transceiver combines a transmitter for outbound data with a receiver for inbound data. Its single-driver, single-receiver arrangement is intended for point-to-point serial links and portable equipment requiring compact implementation. The MAX3221EEAE-T operates from 3.0V to 5.5V, supports signaling rates through 250kbps, and provides ±15kV ESD protection. AutoShutdown reduces supply current to 1µA when no valid receiver signal is detected, while automatic wakeup reactivates the interface when valid data returns. These characteristics make the device useful where serial connectivity must coexist with strict power-consumption limits. Internally, the device combines its RS-232 driver and receiver functions with on-board charge-pump support, enabling operation from a single 3.0V to 5.5V supply rather than a bipolar ±5V source. The enhanced ESD protection is intended to improve tolerance to electrostatic discharge encountered during cable connection, removal, and industrial or commercial handling. Typical uses include industrial serial adapters, data-acquisition equipment, POS terminals, barcode scanners, test instruments, and embedded systems that exchange data with RS-232 peripherals. The 250kbps capability suits moderate-speed command and control links, while the low-power shutdown behavior benefits portable or intermittently connected systems. PCB design should account for the 16-pin SSOP footprint, place the charge-pump capacitors as close as practical to their designated pins, and keep the RS-232 driver outputs and receiver inputs away from sensitive high-speed traces. Confirm the capacitor values, supply bypassing, and charge-pump layout against the manufacturer datasheet before releasing the PCB. This product page combines the manufacturer family specifications, exact ordering information, structured alternatives, package details, and practical interface-design guidance to support component selection and board-layout planning.

RFC Hubungi kami
MAX3221EEAE/GG8 - 250kbps RS-232 Transceiver | Analog Devices
MAX3221EEAE/GG8

MAX3221EEAE/GG8 - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EEAE/GG8 is a 3.0V to 5.5V powered, single-transmitter/single-receiver RS-232 transceiver with automatic shutdown and wake-up, 250kbps data-rate capability, and ±15kV ESD protection in a 16-pin SSOP package. It is designed for low-power serial-interface systems requiring EIA/TIA-232 and V.28/V.24-compatible signal levels. An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 differential voltage levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX3221E family combines one transmit channel and one receive channel with low-power 3V operation, making it suitable for embedded equipment, industrial controllers, point-of-sale terminals, and other systems that exchange data over short-distance serial links. The device operates from a 3.0V to 5.5V supply, supports data rates up to 250kbps, and includes enhanced electrostatic-discharge protection of ±15kV. Automatic shutdown and wake-up functions reduce supply current when the interface is inactive, while transmitter and receiver enable pins support controlled power management in systems with multiple peripheral connections. MAX3221EEAE/GG8 uses the MAX3221E single-channel architecture, providing one RS-232 transmitter and one receiver rather than the multiple-channel arrangement used by some larger transceivers. Its 16-pin SSOP package supports compact PCB layouts, and the industrial-temperature ordering option is identified by the GG8 package and temperature suffix. Typical applications include serial adapters, test equipment, industrial control interfaces, barcode scanners, embedded data-collection systems, and communication links between a host controller and an external RS-232 peripheral. The 250kbps capability is appropriate for legacy serial protocols and control traffic that do not require modern high-speed differential interfaces. When designing the circuit, place the charge-pump capacitors and interface-protection components close to the device and route the RS-232 connector signals away from sensitive analog and digital signal paths. Confirm the supply voltage, logic levels, connector pinout, and charge-pump capacitor values against the manufacturer datasheet before releasing the PCB layout. This page combines the device specifications, package information, application guidance, design considerations, and drop-in alternatives into a practical engineering reference for selecting and implementing the MAX3221EEAE/GG8.

RFC Hubungi kami
MAX3221EETE+T - 250kbps AutoShutdown RS-232 | Analog Devices
MAX3221EETE+T

MAX3221EETE+T - 250kbps AutoShutdown RS-232 | Analog Devices

The Analog Devices MAX3221EETE+T is a 3.0V to 5.5V RS-232 transceiver with one transmitter and one receiver, 250 kbps operation, and ±15 kV ESD protection in a 16-pin TQFN package with an exposed pad. The MAX3221E family also provides automatic shutdown and wakeup, with supply current reduced to 1 µA when no valid receiver signal is detected. An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar, inverted signaling used by RS-232 equipment. It belongs to the interface IC hierarchy, where it bridges UART, UART-compatible controller, and peripheral circuitry with legacy or industrial communications ports. The MAX3221E supports the EIA/TIA-232 and V.28/V.24 signaling requirements identified for the MAX3221E family. The MAX3221EETE+T combines a 250 kbps data rate with a 3.0V to 5.5V supply range, allowing operation alongside both 3.3V and 5V digital systems. Its AutoShutdown circuit recognizes when connected equipment is powered off or no valid signal appears on a receiver input, then disables the internal charge pump and drivers to reduce power consumption. Automatic wakeup restores operation when a valid signal returns. The enhanced electrostatic-discharge design protects the transmitter outputs and receiver inputs against ±15 kV ESD events. This protection is particularly useful for cables connected to external equipment, where electrostatic discharge can enter through a connector rather than through the protected logic-side pins. The device converts one TTL or CMOS data channel into an RS-232 signal and converts one inbound RS-232 signal back into a logic-level output. Typical uses include industrial serial adapters, test and measurement equipment, point-of-sale terminals, security systems, and embedded systems that retain an RS-232 port. The 250 kbps capability supports substantially faster communication than conventional low-speed RS-232 links, while the small TQFN package suits compact control boards. Systems requiring more than one RS-232 port normally require additional transceiver channels or a multichannel interface family. When laying out the PCB, place the charge-pump capacitors and interface capacitors close to their designated pins, connect the exposed thermal pad to the ground plane, and keep the RS-232 traces away from sensitive clock, sensor, and analog signals. Confirm capacitor values, voltage ratings, and exposed-pad soldering requirements against the manufacturer datasheet before fabrication. This product page combines the manufacturer interface specifications with package, sourcing, application, and replacement guidance. It also highlights practical ESD, layout, power-management, and signal-integrity considerations that engineers can apply when integrating the MAX3221EETE+T into a compact RS-232 circuit.

RFC Hubungi kami
MAX3221EEUE+T - 250kbps RS-232 Transceiver | Analog Devices
MAX3221EEUE+T

MAX3221EEUE+T - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EEUE+T is a single-transceiver RS-232 interface IC with one transmitter and one receiver, a maximum data rate of 250 kbps, and operation from 3.0 V to 5.5 V. It is packaged in a 16-pin TSSOP and includes enhanced electrostatic-discharge protection rated at ±15 kV. The MAX3221E family also provides automatic shutdown and wake-up behavior to reduce supply consumption when the connected RS-232 link is inactive. An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. It belongs to the interface IC hierarchy alongside UART transceivers, line drivers, and level shifters. The MAX3221EEUE+T is designed for equipment that requires one bidirectional RS-232 connection, such as configuration ports, service interfaces, point-of-sale terminals, and industrial control systems. Key operating characteristics include a 3.0 V to 5.5 V supply range, full-duplex operation, and data rates up to 250 kbps. Its enhanced ESD protection helps the interface withstand electrostatic discharge on exposed RS-232 connections. AutoShutdown reduces the supply current to approximately 1 µA when no valid receiver signal is detected, while automatic wake-up returns the device to an active state when a valid signal appears. The MAX3221E/MAX3223E/MAX3243E family supports EIA/TIA-232 and V.28/V.24 communication interfaces. The MAX3221EEUE+T combines one driver and one receiver in a compact 16-pin TSSOP, making it suitable for space-constrained designs that require a single RS-232 port. Its 250 kbps capability supports faster service and data links than conventional low-speed RS-232 implementations. Typical applications include industrial controller service ports, point-of-sale and retail equipment, test systems, security consoles, and embedded control boards. The device is particularly useful when the system must operate from a 3.3 V supply while communicating with a legacy RS-232 peripheral or computer port. PCB design should keep the RS-232 connector and protection network close to the transceiver while maintaining separation from sensitive analog or high-speed digital traces. Follow the manufacturer datasheet for external charge-pump capacitor values, receiver and transmitter connection details, and the complete 16-pin assignment before finalizing the layout. This page combines the exact ordering information, RS-232 operating characteristics, package details, sourcing options, and application guidance needed to evaluate the MAX3221EEUE+T for a new interface design.

RFC Hubungi kami
MAX3221EIDB - 250kbps 3V-5.5V RS-232 Transceiver | TI
MAX3221EIDB

MAX3221EIDB - 250kbps 3V-5.5V RS-232 Transceiver | TI

Texas Instruments MAX3221EIDB is a single-channel RS-232 line driver and receiver operating from a single 3V to 5.5V supply at up to 250kbps, with one transmitter, one receiver, and a 16-pin SSOP package. Its RS-232 connector-side pins provide IEC 61000-4-2 ESD protection, and the device meets TIA/EIA-232-F requirements. An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a serial port. The MAX3221E combines a differential line driver, receiver, dual charge-pump circuit, and automatic signal generation in one package. It occupies the interface ICs level within the broader communications and industrial-control hierarchy, where reliable voltage translation, electrostatic-discharge protection, and economical PCB integration are important. The device provides one full-duplex RS-232 channel with a maximum data rate of 250kbps. Its single 3V to 5.5V supply operation allows use with both 3.3V and 5V systems. The integrated charge pump produces the bipolar voltage levels required by RS-232 while reducing the number of external components to four small capacitors. IEC 61000-4-2 protection on the serial-port connection pins adds protection where cables enter an enclosure. The MAX3221E implements one driver and one receiver with a dedicated receiver-enable function. It provides the electrical interface between an asynchronous communication controller and an RS-232 connector while satisfying TIA/EIA-232-F requirements. This architecture suits point-to-point links that do not require multiple RS-232 channels, such as service-console, configuration-port, industrial-controller, and legacy peripheral connections. Typical applications include single-port RS-232 adapters, programmable logic controller service interfaces, industrial control equipment, test fixtures, and embedded systems that retain a legacy serial connector. The 16-pin SSOP package supports compact, surface-mount PCB construction, while the 250kbps rate is suitable for moderate-speed asynchronous data transfer rather than high-bandwidth protocols. Designers should follow the manufacturer’s recommended capacitor values and placement guidance for the charge-pump circuit. Keep the external capacitors close to their designated pins, route the RS-232 connector-side nets away from sensitive logic, and use a suitable protection network when cables extend beyond the protected board boundary. Verify that the host voltage levels and connector pin assignment match the selected logic family. This product page combines the MAX3221EIDB electrical characteristics, package details, available drop-in alternatives, comparison parameters, and application-specific design guidance. It is intended to accelerate component selection, PCB planning, and RS-232 interface qualification without requiring the reader to reconstruct the design trade-offs from separate listings.

RFC Hubungi kami
MAX3221EIDBG4 - Single-Channel 3V RS-232 Transceiver | Texas Instruments
MAX3221EIDBG4

MAX3221EIDBG4 - Single-Channel 3V RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3221EIDBG4 is a single-channel RS-232 line transceiver with one driver and one receiver, a 3 V to 5.5 V supply range, and operation up to 250 kbps. The device is housed in a 16-pin SSOP package. Its serial-port pins provide ±15 kV ESD protection, and the circuit includes a dual charge-pump supply for compliant RS-232 signal levels. An RS-232 transceiver is an interface IC that translates logic-level signals between a host or controller and a serial connector. The transmitter converts TTL or CMOS logic into bipolar RS-232 levels, while the receiver converts the bipolar signal back into logic-compatible levels. The MAX3221 therefore connects an asynchronous communication controller to a serial port without requiring external RS-232 line drivers or receivers. The MAX3221EIDBG4 offers a flexible 3 V to 5.5 V operating supply and a maximum signaling rate of 250 kbps. According to the manufacturer datasheet, the device meets TIA/EIA-232-F requirements and incorporates a dual charge-pump circuit. Dedicated receiver enable support allows the receiver to be controlled when the serial interface is not active. The E and I ordering designations identify the industrial-temperature version in the SSOP package family, while G4 identifies the tape-and-reel shipping format. The 16-pin SSOP has a stated body width of approximately 5.30 mm and a package width of 0.209 inch. Lead-free status and industrial temperature grade are explicitly listed for this device. Typical uses include industrial serial adapters, point-to-point RS-232 links, embedded data acquisition equipment, maintenance interfaces, and legacy peripheral connections. A single transceiver is appropriate when only one RS-232 channel is needed. Multiport systems generally require additional transceiver channels or a multi-channel interface IC. PCB design should keep charge-pump capacitors and RS-232 connector protection close to the relevant pins. Confirm the complete pin assignment, exposed supply requirements, and recommended capacitor values in the manufacturer datasheet before releasing a layout. External transient protection may still be required when the connector is exposed to severe industrial surge environments. This product page combines the device specifications, package information, application guidance, lifecycle information, and verified cross-reference findings for faster engineering review. It also highlights the limitation that no independently verified, same-package drop-in alternatives could be confirmed without risking an incorrect PCB substitution.

RFC Hubungi kami
MAX3221EIDBR - 250kbps 3V-5.5V RS-232 Transceiver | TI (Tape & Reel)
MAX3221EIDBR

MAX3221EIDBR - 250kbps 3V-5.5V RS-232 Transceiver | TI (Tape & Reel)

Texas Instruments MAX3221EIDBR is a single-channel RS-232 line driver and receiver operating from a single 3V to 5.5V supply at up to 250kbps, with one transmitter, one receiver, and a 16-pin SSOP package. Its RS-232 connector-side pins provide IEC 61000-4-2 ESD protection, and the device meets TIA/EIA-232-F requirements. An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a serial port. The MAX3221E combines a differential line driver, receiver, dual charge-pump circuit, and automatic signal generation in one package. It occupies the interface ICs level within the broader communications and industrial-control hierarchy, where reliable voltage translation, electrostatic-discharge protection, and economical PCB integration are important. The device provides one full-duplex RS-232 channel with a maximum data rate of 250kbps. Its single 3V to 5.5V supply operation allows use with both 3.3V and 5V systems. The integrated charge pump produces the bipolar voltage levels required by RS-232 while reducing the number of external components to four small capacitors. IEC 61000-4-2 protection on the serial-port connection pins adds protection where cables enter an enclosure. The MAX3221E implements one driver and one receiver with a dedicated receiver-enable function. It provides the electrical interface between an asynchronous communication controller and an RS-232 connector while satisfying TIA/EIA-232-F requirements. This architecture suits point-to-point links that do not require multiple RS-232 channels, such as service-console, configuration-port, industrial-controller, and legacy peripheral connections. Typical applications include single-port RS-232 adapters, programmable logic controller service interfaces, industrial control equipment, test fixtures, and embedded systems that retain a legacy serial connector. The 16-pin SSOP package supports compact, surface-mount PCB construction, while the 250kbps rate is suitable for moderate-speed asynchronous data transfer rather than high-bandwidth protocols. Designers should follow the manufacturer’s recommended capacitor values and placement guidance for the charge-pump circuit. Keep the external capacitors close to their designated pins, route the RS-232 connector-side nets away from sensitive logic, and use a suitable protection network when cables extend beyond the protected board boundary. Verify that the host voltage levels and connector pin assignment match the selected logic family. This product page combines the MAX3221EIDBR electrical characteristics, package details, available drop-in alternatives, comparison parameters, and application-specific design guidance. It is intended to accelerate component selection, PCB planning, and RS-232 interface qualification without requiring the reader to reconstruct the design trade-offs from separate listings.

RFC Hubungi kami
MAX3221EIDBRG4 - 3V-5.5V RS-232 Transceiver | Texas Instruments
MAX3221EIDBRG4

MAX3221EIDBRG4 - 3V-5.5V RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221EIDBRG4 is a 3 V to 5.5 V single-channel RS-232 line driver and receiver with a 250 kbps data rate and ±15 kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin SSOP with a 5.30 mm body width and is supplied in the G4 lead-free, tape-and-reel configuration. An RS-232 transceiver is an interface IC that combines a differential line driver with a line receiver. It converts logic-level signals into RS-232-compatible levels and converts incoming RS-232 signals back into logic levels. Within the interface hierarchy, the MAX3221EIDBRG4 belongs to the RS-232 transceiver family of interface ICs and is designed for short-distance point-to-point serial links using the RS-232 protocol. The principal operating features include a 3 V to 5.5 V supply range, one driver and one receiver, and a maximum signaling rate of 250 kbps. The RS-232 pins are protected to ±15 kV under the Human Body Model and to ±8 kV under the IEC 61000-4-2 contact-discharge test. Air-discharge protection reaches ±15 kV, providing a substantial margin for exposed serial ports that may encounter electrostatic discharge. This single-channel architecture is useful when a system requires one bidirectional RS-232 port without allocating space for a multi-channel transceiver. The broad supply-voltage range allows operation from 3.3 V or 5 V system rails, while the integrated line-driver and receiver circuitry reduces the number of external interface components. The SSOP-16 package provides a practical option for compact industrial, instrumentation, and embedded-control equipment. Typical applications include configuration-port links in industrial equipment, serial adapters, point-of-sale terminals, laboratory instruments, maintenance interfaces, and embedded systems that exchange commands or diagnostic data with a host computer. At 250 kbps, the interface is appropriate for moderate-speed command and control traffic rather than high-bandwidth bulk transfer. Designers should use the charge-pump capacitor values and external driver/receiver capacitors specified by the manufacturer datasheet. Keep the RS-232 connector-side traces away from sensitive analog circuitry, provide the required bypass capacitance close to the supply pins, and consider adding connector-side protection where cables extend beyond the enclosure or into industrial environments. This page combines manufacturer specifications, package and ordering information, drop-in replacement guidance, comparison data, and practical interface-design notes. It is intended to help engineers confirm electrical compatibility, package fit, protection level, and application suitability before assigning the MAX3221EIDBRG4 to a PCB or updating an existing BOM.

RFC Hubungi kami
MAX3221EIPW - 250kbps Single RS-232 Transceiver | TI
MAX3221EIPW

MAX3221EIPW - 250kbps Single RS-232 Transceiver | TI

The Texas Instruments MAX3221EIPW is a single-channel RS-232 line driver and receiver rated for 250kbps operation, with a 3V to 5.5V supply range and ±15kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin TSSOP surface-mount package. An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into logic-compatible levels. The MAX3221E belongs to the RS-232 transceiver family within interface ICs and power-management-adjacent signal-conditioning devices. It provides the electrical interface between an asynchronous communication controller and a serial-port connector. The MAX3221E uses a single power supply and an on-chip charge pump with four small external capacitors. Its single driver and single receiver arrangement suits point-to-point serial links, while the enhanced ESD protection helps improve robustness at connector-facing pins. Operation across a 3V to 5.5V supply range supports both 3.3V and 5V system rails. The device meets TIA/EIA-232-F requirements and provides IEC 61000-4-2 ESD protection. These qualifications are important because RS-232 implementations frequently connect through external connectors where cables and ESD events can introduce transient voltage. The MAX3221EIPW is therefore suitable for industrial control links, service interfaces, and embedded equipment requiring a compact single-channel RS-232 solution. Typical uses include configuring a UART port on an embedded controller, upgrading an industrial peripheral that still uses an RS-232 connector, and creating a service or debug link between a host computer and field equipment. Because the interface is single-channel, applications needing multiple simultaneous RS-232 ports generally require additional transceiver channels or separate interface devices. Place the four charge-pump capacitors close to their assigned pins, and route the RS-232 driver and receiver traces as a protected cable-side interface. Keep logic-side UART traces away from connector and charge-pump nodes, provide a stable ground return, and verify the external protection network against the system’s ESD requirements. This page combines the manufacturer’s electrical specifications, package details, qualified substitute analysis, and practical PCB guidance. It also highlights where MAX3221E family alternatives share the same TSSOP-16 footprint and where their shutdown, enable, or ESD characteristics require verification before replacement.

RFC Hubungi kami
MAX3221EIPWG4 - 250kbps Single RS-232 Transceiver | TI
MAX3221EIPWG4

MAX3221EIPWG4 - 250kbps Single RS-232 Transceiver | TI

Texas Instruments MAX3221EIPWG4 is a single-channel RS-232 line transceiver with one driver and one receiver, a 250kbps maximum data rate, and ±15kV ESD protection. It operates from a single 3V to 5.5V supply and is packaged in a 16-pin TSSOP. The MAX3221E series provides the electrical interface between an asynchronous communications controller and an RS-232 connector. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and the voltage-domain signals used by RS-232 equipment. The MAX3221E belongs to the line-driver and receiver hierarchy, converts one transmit and one receive channel, and uses an on-chip charge pump with four external capacitors to generate the bipolar voltage required for RS-232 transmission. The device supports 3V to 5.5V operation and data rates up to 250kbps. Its ±15kV ESD protection applies to the RS-232 pins and helps protect the interface when cables are connected or disconnected. According to the manufacturer product page, the MAX3221 family meets TIA/EIA-232-F requirements, while the MAX3221E description identifies IEC 61000-4-2 ESD protection on the RS-232 pins. Typical uses include industrial serial-port equipment, data acquisition systems, embedded controllers, test and measurement instruments, and service interfaces that communicate through legacy RS-232 links. The single-channel architecture is appropriate when only one physical RS-232 channel is required and board area is more important than multi-channel integration. The 16-pin TSSOP supports compact surface-mount layouts, but its gull-wing leads require adequate spacing between the device and surrounding circuitry. The MAX3221EIPWG4 is marked obsolete and is no longer manufactured. New designs should confirm the lifecycle status of the selected replacement and compare its pinout, supply range, data rate, ESD rating, and charge-pump capacitor requirements before release. The obsolete status also makes obsolete-part sourcing, traceability, and long-term availability important procurement considerations. This page combines the manufacturer’s electrical specifications, lifecycle information, package details, application guidance, and a strict drop-in comparison framework. For a production redesign, verify the complete pin description and capacitor values in the manufacturer datasheet, then confirm supply-chain status using the Request a Quote form on this page before committing the component to a new PCB revision.

RFC Hubungi kami
MAX3221EIPWR - 250kbps Single RS-232 Transceiver | TI (Tape & Reel)
MAX3221EIPWR

MAX3221EIPWR - 250kbps Single RS-232 Transceiver | TI (Tape & Reel)

The Texas Instruments MAX3221EIPWR is a single-channel RS-232 line driver and receiver rated for 250kbps operation, with a 3V to 5.5V supply range and ±15kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin TSSOP surface-mount package. An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into logic-compatible levels. The MAX3221E belongs to the RS-232 transceiver family within interface ICs and power-management-adjacent signal-conditioning devices. It provides the electrical interface between an asynchronous communication controller and a serial-port connector. The MAX3221E uses a single power supply and an on-chip charge pump with four small external capacitors. Its single driver and single receiver arrangement suits point-to-point serial links, while the enhanced ESD protection helps improve robustness at connector-facing pins. Operation across a 3V to 5.5V supply range supports both 3.3V and 5V system rails. The device meets TIA/EIA-232-F requirements and provides IEC 61000-4-2 ESD protection. These qualifications are important because RS-232 implementations frequently connect through external connectors where cables and ESD events can introduce transient voltage. The MAX3221EIPWR is therefore suitable for industrial control links, service interfaces, and embedded equipment requiring a compact single-channel RS-232 solution. Typical uses include configuring a UART port on an embedded controller, upgrading an industrial peripheral that still uses an RS-232 connector, and creating a service or debug link between a host computer and field equipment. Because the interface is single-channel, applications needing multiple simultaneous RS-232 ports generally require additional transceiver channels or separate interface devices. Place the four charge-pump capacitors close to their assigned pins, and route the RS-232 driver and receiver traces as a protected cable-side interface. Keep logic-side UART traces away from connector and charge-pump nodes, provide a stable ground return, and verify the external protection network against the system’s ESD requirements. This page combines the manufacturer’s electrical specifications, package details, qualified substitute analysis, and practical PCB guidance. It also highlights where MAX3221E family alternatives share the same TSSOP-16 footprint and where their shutdown, enable, or ESD characteristics require verification before replacement.

RFC Hubungi kami
MAX3221EUE+T - 1/1 RS-232 Transceiver | Analog Devices
MAX3221EUE+T

MAX3221EUE+T - 1/1 RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EUE+T is a single-driver, single-receiver RS-232 transceiver rated for 120 Kbps operation, supplied from a 3.0 V to 5.5 V rail and housed in a 16-pin TSSOP package. It is designed for compact equipment that requires a bidirectional RS-232 connection without the larger channel count and footprint of a multi-driver interface IC. The device supports a 1 A supply current and belongs to the MAX3221 family with automatic shutdown and wake-up functionality. An RS-232 transceiver is an interface IC that translates between logic-level signals and the voltage levels used by RS-232 equipment. The transmitter converts a low-voltage digital signal into the bipolar voltage swing required by the RS-232 standard, while the receiver converts the incoming bipolar signal back into a logic-level output. Within the product hierarchy, the MAX3221EUE+T is an RS-232 transceiver, a serial-interface IC, and a member of the broader interface and semiconductor categories. The principal device characteristics are its 120 Kbps data rate, one transmit channel, one receive channel, 3.0 V to 5.5 V operating supply range, and 16-pin TSSOP package. Analog Devices describes the MAX3221 family as using AutoShutdown to reduce supply current to approximately 1 µA when no valid receiver signal is present. This low-power behavior is useful in battery-operated and intermittently connected systems where a permanently powered interface would otherwise waste energy. The MAX3221 family differs from the larger MAX3223 and MAX3243 devices in channel count and package size. The MAX3221 provides one driver and one receiver in a 16-pin package, making it appropriate for point-to-point links, while the MAX3223 and MAX3243 support multiple channels. AutoShutdown allows the interface to remain attached to a connector while reducing current consumption during inactivity, provided the system uses the shutdown and wake-up control functions as described by the manufacturer. Typical uses include industrial serial adapters, point-of-sale equipment, instrumentation, data acquisition systems, embedded control consoles, and maintenance interfaces. The single-channel arrangement is well suited to a local host port or service connector. For designs using a longer cable or a noisy industrial environment, the circuit should also consider connector grounding, cable length, signal polarity, and the ESD protection requirements of the complete system rather than relying on the transceiver alone. For layout, place the transceiver close to the RS-232 connector and keep the charge-pump, bypass-capacitor, driver, and receiver paths compact. Keep sensitive logic traces away from the switching node of the internal charge pump. Decouple the supply pins locally, use the package pin definitions in the manufacturer datasheet, and confirm external protection requirements for the connector and cable environment. This page consolidates the manufacturer family information, verified distributor listings, package details, compatible interface alternatives, and practical design guidance into one engineering reference. It also distinguishes documented performance from parameters that require confirmation in the complete datasheet before a new PCB is released for production.

RFC Hubungi kami
MAX3221EUE+TG1Z - 3V RS-232 Transceiver | Analog Devices
MAX3221EUE+TG1Z

MAX3221EUE+TG1Z - 3V RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EUE+TG1Z is a single-channel RS-232 transceiver with one transmitter and one receiver, operating from a 3 V to 5.5 V supply in a 16-pin TSSOP package. The device provides a 250 kbps data rate, automatic shutdown and wake-up behavior, and enhanced electrostatic-discharge protection rated at ±15 kV IEC-ESD. Its MAX3221E family architecture combines RS-232 line-driver and receiver functions in one package, making it suitable for compact serial-interface equipment. An RS-232 transceiver is an interface IC that converts logic-level digital signals to RS-232 voltage levels and converts incoming RS-232 signals back to logic levels. The MAX3221E belongs to the broader RS-232 transceiver, line-driver/receiver, communications-interface, and interface-IC hierarchy. Its single-channel arrangement is appropriate when a system needs one serial port rather than multiple RS-232 channels. The main advantages of the MAX3221E family are its low 3 V supply operation, 250 kbps maximum signaling rate, automatic power management, and enhanced ESD protection. AutoShutdown reduces supply consumption when the receiver does not detect a valid signal, while automatic wake-up restores operation when valid data returns. The manufacturer describes the MAX3221, MAX3223, and MAX3243 as achieving 1 uA supply current with this shutdown mechanism. The EUE+TG1Z ordering code identifies the MAX3221E device in a 16-pin TSSOP package, with the industrial temperature option and tape-and-reel production form indicated by the ordering suffix. The MAX3221E family supports 3 V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. Its protected receiver and driver outputs are intended for equipment where the external serial port can be exposed to electrostatic discharge or cable transients. Typical applications include industrial serial consoles, programmable test equipment, point-of-sale terminals, instrument-control links, and embedded systems that retain an RS-232 port. In each case, the transceiver can operate from a 3 V system rail while providing the larger voltage swings required by RS-232. The 250 kbps capability also supports moderately high-speed legacy serial links, although the chosen protocol, cable length, and receiver thresholds remain important system-level constraints. Designers should follow the manufacturer’s recommended charge-pump capacitor and logic-side bypass-capacitor connections, keep the RS-232 trace route away from sensitive analog or high-speed digital nets, and provide the required protection and grounding strategy at an external connector. The device’s automatic shutdown behavior should also be checked against the system’s idle-state and remote-wakeup expectations. This page combines the exact orderable MPN, interface characteristics, package information, practical application guidance, and verified comparison context. It also identifies where detailed pin mapping, lifecycle status, and complete alternative-specific electrical limits must be confirmed in the manufacturer datasheet before design release.

RFC Hubungi kami
MAX3221IDB - 250kbps Single RS-232 Transceiver | TI
MAX3221IDB

MAX3221IDB - 250kbps Single RS-232 Transceiver | TI

The Texas Instruments MAX3221IDB is a single-channel RS-232 line driver and receiver with a 3 V to 5.5 V supply range, data rate up to 250 kbps, and ±15 kV ESD protection in a 16-pin SSOP package. The device provides one driver and one receiver with a dedicated receiver-enable function for serial-port interfaces. An RS-232 transceiver is an interface integrated circuit that converts logic-level UART signals into RS-232 voltage levels and converts returning RS-232 signals back into logic-compatible levels. The MAX3221IDB sits between an asynchronous communication controller and a serial connector, combining a line driver, line receiver, and dual charge-pump circuit in one compact package. Its headline operating specifications are a 3 V to 5.5 V supply range, 250 kbps maximum signaling rate, and ±15 kV pin-to-pin ESD protection. The integrated dual charge-pump circuit generates the positive and negative voltage levels required for RS-232 transmission without requiring an external supply. A dedicated receiver-enable pin supports controlled reception when the host does not need the incoming signal continuously. The device meets the electrical requirements stated for TIA/EIA-232-F and is intended for asynchronous serial communication. Because the MAX3221IDB combines only one transmit channel and one receive channel, it is most appropriate where the system needs a compact point-to-point RS-232 interface rather than multiple channels. Its 16-pin SSOP format also supports conventional surface-mount PCB assembly. Typical uses include industrial serial controllers, point-to-point data links, configuration-port interfaces, test equipment, and embedded systems that communicate with RS-232 equipment. The 250 kbps capability is suitable for common serial-port baud rates while the internal charge pumps simplify implementation compared with a discrete level-shifting circuit. When laying out the circuit, place the charge-pump capacitors and interface protection components close to their associated pins, and route the driver and receiver traces away from sensitive analog circuitry. Confirm connector-level signal integrity with the intended cable, baud rate, grounding arrangement, and ESD environment before production release. This page combines the manufacturer specifications, drop-in replacement information, application guidance, and design considerations needed to evaluate the MAX3221IDB for a single-channel RS-232 interface. Use the Request a Quote form on this page for current commercial availability and lead-time information.

RFC Hubungi kami
MAX3221IDBE4 - 250kbps Single RS-232 Transceiver | Texas Instruments
MAX3221IDBE4

MAX3221IDBE4 - 250kbps Single RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3221IDBE4 is a single-channel RS-232 line driver and receiver operating from 3 V to 5.5 V, supporting data rates up to 250 kbps with ±15 kV ESD protection. The device is packaged in a 16-pin SSOP. It provides one transmitter and one receiver for compact serial-interface designs where both RS-232 signal conditioning and board-space efficiency are important. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 levels and converts received RS-232 levels back into logic levels. It belongs to the RS-232 transceiver class of interface ICs, with the broader hierarchy progressing from transceiver to interface controller, communication interface, and semiconductor. The MAX3221 integrates a dual charge-pump circuit with the driver and receiver, reducing the external component count required for a working RS-232 port. The 3 V to 5.5 V supply range allows operation in systems powered from 3.3 V or 5 V rails. Its 250 kbps data-rate capability suits legacy serial equipment, industrial control links, configuration ports, and service interfaces. Dedicated enable control can place the driver in a reduced-drive state when the associated receiver is not needed, while the integrated charge pump provides the RS-232 level translation required by the standard interface. The ±15 kV ESD protection rating applies to the RS-232 serial-port connection pins and ground, adding valuable protection for equipment that may be connected to external cabling. ESD resilience is particularly important in industrial and communications equipment where a disconnected or partially installed cable can expose a port to electrostatic discharge. The 16-pin SSOP footprint also supports compact layouts without requiring a large connector-side interface package. Typical uses include single-port RS-232 links in industrial controllers, test equipment, data acquisition systems, configuration and programming ports, and service interfaces for embedded products. The part is most appropriate where one bidirectional serial channel is needed, the data rate is below 250 kbps, and a 3.3 V or 5 V system supply is available. Designs requiring several RS-232 ports normally favor a multichannel transceiver instead. A key implementation consideration is to place charge-pump capacitors, supply bypassing, and the RS-232 connector interface components exactly as shown in the manufacturer’s recommended layout. Keep connector-side traces short, provide a low-impedance ground return, and avoid routing sensitive signals alongside RS-232 outputs. These practices reduce radiated emissions, susceptibility to cable-borne noise, and ESD-related stress concentration. This page combines the key MAX3221IDBE4 operating specifications, verified package information, drop-in replacement guidance, application-focused design guidance, and a parameter comparison for faster engineering selection. It is intended to help engineers determine whether the single-channel architecture, 250 kbps limit, SSOP footprint, and integrated ESD protection fit a particular RS-232 interface.

RFC Hubungi kami
MAX3221IDBG4 - Single RS-232 Transceiver | Texas Instruments
MAX3221IDBG4

MAX3221IDBG4 - Single RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221IDBG4 is a single-channel RS-232 line driver and receiver, or transceiver, designed for asynchronous serial communication. It operates from a 3 V to 5.5 V supply, supports data rates up to 250 kbit/s, and provides ±15 kV human-body-model ESD protection on the serial-port connection pins, including ground. The device is packaged in a 16-pin SSOP. An RS-232 transceiver is an interface IC that converts logic-level signals from a host, controller, or embedded processor into RS-232 voltage levels, while converting incoming RS-232 signals back into CMOS-compatible logic. This device belongs to the interface IC hierarchy, combining a line driver, line receiver, and dual charge-pump voltage-conversion circuitry in one package. It is designed to bridge modern digital electronics with legacy RS-232 equipment. The MAX3221IDBG4 provides one driver and one receiver, making it appropriate for point-to-point serial links, industrial equipment, data-acquisition systems, service interfaces, and embedded control products. Its 3 V to 5.5 V operating range allows operation from both 3.3 V and 5 V systems. The 250 kbit/s data rate supports moderate-speed serial communication while the integrated charge pumps generate the bipolar voltage levels required by RS-232 without requiring a separate negative supply. The ±15 kV ESD rating applies to the human-body model and is intended to improve protection when cables are connected to exposed communication ports. This protection does not eliminate the need for appropriate system-level grounding, shielding, or surge-protection design. The device also uses charge-pump circuitry, so power-supply bypass capacitors and careful layout around the flying-capacitor connections remain important for stable operation. Typical uses include service-console interfaces, industrial control panels, instrumentation, point-of-sale equipment, and systems that retain an RS-232 port while using a modern microcontroller. Its single-channel architecture minimizes board area compared with multi-channel transceivers when only one serial port is required. When selecting this interface, verify the connector's signal polarity, the host-side logic levels, the required data rate, and the grounding arrangement. Place the charge-pump capacitors and supply bypass capacitors close to their specified pins, and observe the recommended connector and cable-routing practices for exposed RS-232 ports. This page combines device specifications, sourcing guidance, compatible alternatives, and practical interface-design notes for engineers evaluating the MAX3221IDBG4.

RFC Hubungi kami
MAX3221IDBR - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221IDBR

MAX3221IDBR - 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221IDBR is a single-channel RS-232 line driver and receiver rated for data rates up to 250 kbps, with a 3 V to 5.5 V supply range and ±15 kV human-body-model ESD protection. The device is packaged in a 16-pin SSOP package. It provides one transmit channel, one receive channel, a receiver-enable control, and an automatic power-down input. An RS-232 transceiver is an interface IC that translates low-voltage logic levels into the bipolar voltage levels used by RS-232 equipment. In the signal-chain hierarchy, the MAX3221IDBR belongs to the RS-232 interface family and converts between a host controller's logic-level UART signals and the ±RS-232 line interface. Its integrated dual charge-pump circuit generates the signal voltages required for transmission without a separate DC supply. The 3 V to 5.5 V operating range supports both 3.3 V and 5 V systems. According to the manufacturer datasheet, the device operates up to 250 kbps, accepts 5 V logic input when powered from 3.3 V, and has a typical low standby current of 1 µA. The receiver-enable function can reduce quiescent consumption when the receive path is not required. The serial-port connection pins, including ground, have pin-to-pin ESD protection rated at ±15 kV using the human-body model. Internally, the MAX3221IDBR combines one RS-232 driver, one RS-232 receiver, and a dual charge-pump circuit. Four external 0.1 µF capacitors support charge-pump operation. The receiver converts the differential RS-232 input to a CMOS-compatible logic output, while the driver converts CMOS-compatible logic input to the bipolar line voltage. The interface is designed for asynchronous communication controllers and conforms to TIA/EIA-232-F and ITU V.28 requirements. Typical uses include industrial serial-port adapters, point-of-sale equipment, instrumentation, data-acquisition systems, embedded console connections, and legacy peripheral upgrades. The 250-kbps capability is suitable for RS-232 links that need more bandwidth than a conventional slow serial port while retaining compatibility with established communication standards. The compact SSOP-16 footprint also helps reduce board area in space-constrained controller modules. When laying out the circuit, place the four 0.1 µF charge-pump capacitors close to their associated pins and route the RS-232 connector interface for minimum noise pickup. Confirm signal levels, grounding, cable length, and the target data rate before release. The receiver-enable and power-down functions should be driven deliberately so that low-power operation does not interfere with system startup or receive-data handling. This page consolidates the manufacturer's electrical characteristics, package information, verified drop-in alternatives, application guidance, and practical layout considerations into one engineering-focused reference for selecting and implementing the MAX3221IDBR.

RFC Hubungi kami
MAX3221IDBRE4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221IDBRE4

MAX3221IDBRE4 - 250kbps RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3221IDBRE4 is a single-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply at speeds up to 250 kbps, with ±15 kV ESD protection and a 16-pin SSOP package. It provides one driver, one receiver, a dual charge-pump circuit, a dedicated receiver enable input, and 5 V-compatible logic inputs when operated from 3.3 V. An RS-232 transceiver is an interface IC that converts between single-ended logic signals and the bipolar voltage levels used by RS-232 equipment. The MAX3221 belongs to the line-driver and receiver hierarchy within interface ICs, where it sits between a host controller and an external serial connector. Its charge-pump circuitry generates the positive and negative voltages required by the RS-232 transmitter without a separate negative supply. Key features include operation from 3 V to 5.5 V, a maximum data rate of 250 kbps, and ±15 kV human-body-model ESD protection on the serial-port connection pins, including ground. The receiver supports a dedicated enable input, while the device maintains a typical 1 µA standby current. Four external 0.1 µF charge-pump capacitors support the internal voltage conversion, and 5 V logic inputs are accepted with a 3.3 V supply. The MAX3221 implements one half-duplex RS-232 channel, combining a transmitter and receiver in a compact package. Its internal dual charge pump produces the bipolar signal levels required by TIA/EIA-232-F and ITU V.28 interfaces. The target MAX3221IDBRE4 ordering code identifies the 16-pin SSOP configuration, allowing placement with surface-mount assembly while preserving a conventional narrow-body footprint. Typical uses include single-port serial diagnostics, point-of-sale equipment, industrial control links, embedded service interfaces, and legacy peripheral connections. The 250 kbps capability supports low- and moderate-speed serial links, while the dual supply range permits operation from both 3.3 V and 5 V systems. The low standby current is useful when equipment must retain a receive path without continuously loading the supply. Circuit design should preserve the charge-pump capacitor connections, place the four 0.1 µF capacitors close to their associated pins, and route the RS-232 connector and protected serial lines away from sensitive analog and high-speed digital traces. Confirm logic thresholds, signal polarity, flow control, and connector grounding before replacing an existing interface design. This product overview combines the manufacturer's electrical characteristics, package information, interface standards, ESD capability, and practical implementation guidance with engineering-focused comparisons for drop-in device selection.

RFC Hubungi kami
MAX3221IDBRG4 - 250kbps Single RS-232 Transceiver | Texas Instruments
MAX3221IDBRG4

MAX3221IDBRG4 - 250kbps Single RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221IDBRG4 is a single-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply at rates up to 250 kbit/s. The device is packaged in a 16-pin SSOP and provides one driver and one receiver with ±15 kV electrostatic-discharge protection on the bus pins. Its dual charge-pump design supports low-voltage digital systems that must communicate through an RS-232 interface. An RS-232 transceiver is an interface IC that converts logic-level transmit and receive signals into RS-232 line levels and back again. It belongs to the transceiver hierarchy within interface ICs and combines a line driver, line receiver, and charge-pump voltage generation in one package. The MAX3221 is intended for point-to-point serial links, industrial equipment, data acquisition systems, and legacy peripheral connections that do not require multiple RS-232 channels. The MAX3221IDBRG4 accepts a 3 V to 5.5 V supply and can operate with a 3.3 V supply even when its digital input signals reach 5 V. Four external 0.1 µF charge-pump capacitors are specified. Typical standby current is only 1 µA, helping conserve power when the interface is inactive. The device also meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28, providing standards-based operation for conventional RS-232 links. Internally, the dual charge-pump circuit develops the positive and negative voltages required by the RS-232 driver. The receiver converts the corresponding differential voltage at its input back into a logic-level signal. This architecture allows the MAX3221 to communicate with systems whose logic supply is lower than the traditional 5 V RS-232 interface level while avoiding a separate negative supply rail in the equipment. Typical applications include industrial serial controllers, test equipment, configuration interfaces, printers, scanners, and embedded systems that expose an RS-232 port. The 250 kbit/s maximum data rate is suitable for moderate-speed control and data-transfer links. Designers should still account for cable length, baud-rate tolerance, grounding, and transceiver enable timing when establishing a reliable connection. The principal design consideration is the charge-pump capacitor network. Place the four 0.1 µF capacitors close to their associated IC pins, follow the polarity shown in the manufacturer datasheet, and keep the high-voltage RS-232 outputs away from sensitive logic traces. The bus pins receive ±15 kV HBM ESD protection, but cable-side transients and secondary protection requirements should be evaluated for the completed system. This product page consolidates the exact electrical ratings, package information, drop-in cross-reference options, interface applications, and PCB-design considerations needed to evaluate and implement the MAX3221IDBRG4. It also distinguishes confirmed same-package replacements from options that require a different footprint, helping prevent redesign errors during sourcing and second-source decisions.

RFC Hubungi kami
MAX3221IPW - 250kbps Single RS-232 Transceiver | Texas Instruments
MAX3221IPW

MAX3221IPW - 250kbps Single RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221IPW is a single-channel RS-232 line driver/receiver with a 3 V to 5.5 V supply, a maximum data rate of 250 kbps, and ±15 kV ESD protection, housed in a 16-pin TSSOP package. It combines one transmit driver, one receive channel with a dedicated enable input, and a dual charge-pump circuit for converting low-voltage logic into RS-232 bipolar levels. An RS-232 transceiver is the interface between a low-voltage digital controller and a serial port using bipolar signal levels. Also called an RS-232 line driver/receiver or interface transceiver, it belongs to the interface IC hierarchy and translates controller-side logic into RS-232 levels while converting an incoming RS-232 signal back to logic. The MAX3221 supports one communications direction, making it suitable for point-to-point serial links, control consoles, industrial equipment, and embedded systems. Key features include operation from a 3 V to 5.5 V supply, support for data rates up to 250 kbps, and ±15 kV ESD protection on the serial-port connection pins, including ground. The device accepts 5 V logic input while operating from a 3.3 V supply. Its dual charge-pump architecture requires only 0.1 µF external capacitors, while low standby current supports power-conscious designs. Technically, the MAX3221 contains one line driver, one line receiver with a dedicated enable pin, and the charge-pump circuitry needed to generate positive and negative RS-232 voltage levels. According to the manufacturer datasheet, the interface meets TIA/EIA-232-F requirements and provides the electrical interface between an asynchronous communication controller and a serial-port connector. This combination allows a modern microcontroller or processor to communicate with legacy RS-232 equipment without implementing discrete level-shifting circuitry. Typical applications include industrial automation and factory equipment, point-to-point serial adapters, test and measurement instruments, security and access-control systems, and embedded diagnostic ports. The dedicated receiver enable provides a way to place the receive path in a controlled state, while the 3.3 V-compatible supply helps simplify interfaces based on modern logic rails. When designing a board around the MAX3221IPW, place the required charge-pump capacitors close to their corresponding pins and route the RS-232 connector interface away from sensitive analog or high-speed digital paths. External protection, grounding, and cable-routing practices remain important because the specified ±15 kV ESD rating applies to the device pins rather than to every possible system-level surge, lift, or cable event. This product record combines verified manufacturer specifications, distributor availability information, same-footprint replacement data, and practical interface-design guidance. It is intended to help engineers identify the correct RS-232 transceiver, verify package and pin compatibility, plan decoupling, and distinguish a genuine drop-in replacement from a merely similar line-driver or receiver.

RFC Hubungi kami
MAX3221IPWG4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221IPWG4

MAX3221IPWG4 - 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221IPWG4 is a single-channel RS-232 line driver and receiver operating from 3 V to 5.5 V, supporting data rates up to 250 kbps in a 16-pin TSSOP package. It provides ±15 kV electrostatic-discharge protection on the serial-port connection pins and uses on-chip charge-pump circuitry to generate the bipolar voltage required by RS-232 transmitters. An RS-232 transceiver is an interface IC that converts logic-level signals from a controller or embedded processor into RS-232 levels and converts incoming RS-232 signals back into logic levels. Within the broader interface-IC and data-communication hierarchy, the MAX3221 provides a compact single-channel solution for industrial control, embedded instrumentation, POS equipment, and legacy serial-port connectivity. The principal operating features include a 3 V to 5.5 V supply range, a maximum signaling rate of 250 kbps, one driver and one receiver, and ±15 kV ESD protection. Its low supply current supports power-conscious equipment, while the integrated charge pumps eliminate the need for an external ±12 V supply. These characteristics suit systems where reliable serial communication is required without the space and power burden of a multi-channel transceiver. The MAX3221 architecture separates the logic-side interface from the RS-232-side pins so that a host UART can connect directly to the transceiver. Its RS-232 implementation supports the electrical signaling requirements identified by the manufacturer as TI A/EIA-232-F. The device is suited to point-to-point links where one transmitter communicates with one receiver through a protected cable or connector. Typical uses include industrial serial controllers, test equipment, data-acquisition systems, embedded-service interfaces, and legacy peripheral connections. In these systems, the MAX3221 can bridge a 3.3 V or 5 V UART to an RS-232 port while providing ESD protection at the connector-facing pins. Designers should verify signal levels, connector wiring, ground references, and cable length in the final system. For a new PCB, follow the pin-description table and typical application circuit in the manufacturer datasheet when assigning traces and decoupling capacitors. Keep the charge-pump capacitor and I/O routing within the layout recommendations, and provide a low-impedance return path between connected equipment to reduce common-mode voltage and improve communication reliability. This page consolidates the MAX3221IPWG4 operating limits, package information, sourcing structure, verified drop-in candidate, comparison fields, and practical RS-232 design considerations into a compact engineering reference for component selection and board design.

RFC Hubungi kami
MAX3221IPWR - 250kbps Single RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX3221IPWR

MAX3221IPWR - 250kbps Single RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX3221IPWR is a single-channel RS-232 line driver/receiver with a 3 V to 5.5 V supply, a maximum data rate of 250 kbps, and ±15 kV ESD protection, housed in a 16-pin TSSOP package. It combines one transmit driver, one receive channel with a dedicated enable input, and a dual charge-pump circuit for converting low-voltage logic into RS-232 bipolar levels. An RS-232 transceiver is the interface between a low-voltage digital controller and a serial port using bipolar signal levels. Also called an RS-232 line driver/receiver or interface transceiver, it belongs to the interface IC hierarchy and translates controller-side logic into RS-232 levels while converting an incoming RS-232 signal back to logic. The MAX3221 supports one communications direction, making it suitable for point-to-point serial links, control consoles, industrial equipment, and embedded systems. Key features include operation from a 3 V to 5.5 V supply, support for data rates up to 250 kbps, and ±15 kV ESD protection on the serial-port connection pins, including ground. The device accepts 5 V logic input while operating from a 3.3 V supply. Its dual charge-pump architecture requires only 0.1 µF external capacitors, while low standby current supports power-conscious designs. Technically, the MAX3221 contains one line driver, one line receiver with a dedicated enable pin, and the charge-pump circuitry needed to generate positive and negative RS-232 voltage levels. According to the manufacturer datasheet, the interface meets TIA/EIA-232-F requirements and provides the electrical interface between an asynchronous communication controller and a serial-port connector. This combination allows a modern microcontroller or processor to communicate with legacy RS-232 equipment without implementing discrete level-shifting circuitry. Typical applications include industrial automation and factory equipment, point-to-point serial adapters, test and measurement instruments, security and access-control systems, and embedded diagnostic ports. The dedicated receiver enable provides a way to place the receive path in a controlled state, while the 3.3 V-compatible supply helps simplify interfaces based on modern logic rails. When designing a board around the MAX3221IPWR, place the required charge-pump capacitors close to their corresponding pins and route the RS-232 connector interface away from sensitive analog or high-speed digital paths. External protection, grounding, and cable-routing practices remain important because the specified ±15 kV ESD rating applies to the device pins rather than to every possible system-level surge, lift, or cable event. This product record combines verified manufacturer specifications, distributor availability information, same-footprint replacement data, and practical interface-design guidance. It is intended to help engineers identify the correct RS-232 transceiver, verify package and pin compatibility, plan decoupling, and distinguish a genuine drop-in replacement from a merely similar line-driver or receiver.

RFC Hubungi kami
MAX3221IPWRG4 - 250kbps RS-232 IC | Texas Instruments
MAX3221IPWRG4

MAX3221IPWRG4 - 250kbps RS-232 IC | Texas Instruments

Texas Instruments MAX3221IPWRG4 is a single-channel RS-232 line driver and receiver interface IC operating from a 3 V to 5.5 V supply at up to 250 kbps. It provides one driver, one receiver with a dedicated enable pin, a dual charge-pump circuit, and ±15 kV ESD protection on the bus pins. The device is packaged in a 16-pin TSSOP. An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a serial communications link. It belongs to the interface IC hierarchy and combines a line driver, line receiver, voltage conversion, and electrostatic-discharge protection. This integration allows a UART controller operating at 3.3 V or 5 V to communicate with equipment using the TIA/EIA-232-F electrical interface. The MAX3221 supports a 3 V to 5.5 V supply, accepts 5 V logic input with a 3.3 V supply, and operates at data rates up to 250 kbps. Its dual charge-pump circuit supports the positive and negative RS-232 voltage levels using four external 0.1 µF capacitors. Low standby current of 1 µA is useful when the receiver or transmitter must remain powered while conserving system energy. The ±15 kV human-body-model ESD rating applies to the RS-232 bus connections, including ground, and adds protection at the external interface where cables and connectors can expose the circuit to electrostatic discharge. The receiver includes a dedicated enable function, giving the host hardware control over when the received data path is active. The interface meets or exceeds TIA/EIA-232-F and ITU V.28 requirements. Typical uses include single-port RS-232 links in industrial controllers, test equipment, point-of-sale systems, instrumentation, and service interfaces. The device is especially suitable where a compact design needs bidirectional signal translation, low standby consumption, and built-in bus-pin ESD protection without implementing a discrete charge-pump circuit. Design with the four external charge-pump capacitors positioned close to their associated pins. Keep the RS-232 connector-side traces away from sensitive analog or high-speed digital paths, provide a reliable chassis or signal-ground connection, and evaluate additional protection when exposed cables exceed the device's ±15 kV HBM rating. This page combines manufacturer specifications, package details, practical interface-design guidance, and same-footprint replacement options to support component selection, schematic review, PCB layout, and sourcing decisions for the MAX3221IPWRG4.

RFC Hubungi kami