Texas Instruments

MAX3221IPWG4 - 250kbps RS-232 Transceiver | Texas Instruments

MPN: MAX3221IPWG4 ✓ Aktif
3 V to 5.5 V Vdss 1 µA Id 16-pin TSSOP Package
MOQ: 1 |

MAX3221IPWG4 Ringkasan

The Texas Instruments MAX3221IPWG4 is a single-channel RS-232 line driver and receiver operating from 3 V to 5.5 V, supporting data rates up to 250 kbps in a 16-pin TSSOP package. It provides ±15 kV electrostatic-discharge protection on the serial-port connection pins and uses on-chip charge-pump circuitry to generate the bipolar voltage required by RS-232 transmitters.

An RS-232 transceiver is an interface IC that converts logic-level signals from a controller or embedded processor into RS-232 levels and converts incoming RS-232 signals back into logic levels. Within the broader interface-IC and data-communication hierarchy, the MAX3221 provides a compact single-channel solution for industrial control, embedded instrumentation, POS equipment, and legacy serial-port connectivity.

The principal operating features include a 3 V to 5.5 V supply range, a maximum signaling rate of 250 kbps, one driver and one receiver, and ±15 kV ESD protection. Its low supply current supports power-conscious equipment, while the integrated charge pumps eliminate the need for an external ±12 V supply. These characteristics suit systems where reliable serial communication is required without the space and power burden of a multi-channel transceiver.

The MAX3221 architecture separates the logic-side interface from the RS-232-side pins so that a host UART can connect directly to the transceiver. Its RS-232 implementation supports the electrical signaling requirements identified by the manufacturer as TI A/EIA-232-F. The device is suited to point-to-point links where one transmitter communicates with one receiver through a protected cable or connector.

Typical uses include industrial serial controllers, test equipment, data-acquisition systems, embedded-service interfaces, and legacy peripheral connections. In these systems, the MAX3221 can bridge a 3.3 V or 5 V UART to an RS-232 port while providing ESD protection at the connector-facing pins. Designers should verify signal levels, connector wiring, ground references, and cable length in the final system.

For a new PCB, follow the pin-description table and typical application circuit in the manufacturer datasheet when assigning traces and decoupling capacitors. Keep the charge-pump capacitor and I/O routing within the layout recommendations, and provide a low-impedance return path between connected equipment to reduce common-mode voltage and improve communication reliability.

This page consolidates the MAX3221IPWG4 operating limits, package information, sourcing structure, verified drop-in candidate, comparison fields, and practical RS-232 design considerations into a compact engineering reference for component selection and board design.

Pilihan pengganti yang segera untuk MAX3221IPWG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MAX3221IPWR

✅ Masuk Drop-In
Texas Instruments
📦 16-TSSOP
Single-channel RS-232 line driver/receiver · 1 driver · 1 receiver with dedicated enable pin · 3 V to 5.5 V · 250 kbps · ±15 kV on serial-port connection pins · TIA/EIA-232-F · Dual charge-pump circuit

Hubungi untuk harga

Lihat Datasheet →

MAX3221IPWG4 Spesifikasi

Product Type Single-channel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Number of Drivers 1
Number of Receivers 1
ESD Protection ±15 kV
Arus Pemberi Arus 1 µA
Logic Compatibility 3.3 V and 5 V RS-232 interface
Kemasan 16-pin TSSOP
Package Width 4.40 mm
Jenis Pemasangan Surface mount
Charge Pump On-chip dual charge-pump circuit
RS-232 Compliance TI A/EIA-232-F

Panduan Konfigurasi Pin MAX3221IPWG4 4.40 mm

Konfigurasi pin untuk MAX3221IPWG4 (4.40 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 4.40 mm untuk MAX3221IPWG4

Tiada data garisan pin yang diperoleh untuk MAX3221IPWG4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX3221IPWG4 patut untuk 6 aplikasis: Industrial Serial Controller Interface, Embedded Data-Acquisition Equipment, Point-of-Sale Peripheral Link, Legacy Service and Configuration Port, Test and Measurement Equipment, Remote Monitoring and Telemetry.

🏭

Industrial Serial Controller Interface

The MAX3221IPWG4 fits a single-port industrial controller because it converts one UART channel to RS-232 while operating from 3 V to 5.5 V. Its 250 kbps maximum data rate supports moderate-speed command and status links, while the integrated dual charge pumps avoid an external bipolar supply. The ±15 kV ESD rating is useful on connector-facing equipment, although the final industrial design must still meet its enclosure, surge, grounding, and environmental requirements.

🖥️

Embedded Data-Acquisition Equipment

For an embedded measurement instrument, the MAX3221IPWG4 provides a compact RS-232 link from a low-voltage controller to a host computer. The 16-pin TSSOP package preserves PCB area, the 3 V to 5.5 V supply supports 3.3 V systems, and the 250 kbps rate is suitable for many configuration and sample-control commands. Place the transceiver close to the serial connector and follow the recommended charge-pump capacitor layout to minimize signal and EMI issues.

🔧

Point-of-Sale Peripheral Link

A point-of-sale terminal can use the MAX3221IPWG4 when a legacy peripheral requires a single RS-232 port. The single driver and receiver cover a point-to-point cable connection, and the 250 kbps maximum rate is appropriate for many peripheral command protocols. Its low 1 µA supply-current figure also suits compact equipment. Designers should confirm the peripheral’s logic timing, connector pinout, cable length, and grounding requirements before implementation.

🧩

Legacy Service and Configuration Port

The MAX3221IPWG4 is useful for exposing a service or configuration interface on equipment that retains an RS-232 connector. A single channel is sufficient for system-level commands without occupying space for an unused multi-driver device, and operation from 3 V to 5.5 V simplifies integration with modern logic. Add external protection appropriate to the connector environment, maintain a common ground reference, and verify the serial baud-rate tolerance in the complete system.

🔧

Test and Measurement Equipment

The MAX3221IPWG4 can connect a bench instrument or field tester to a host over RS-232. Its 250 kbps capability supports measurement commands and moderate data-transfer duties, while ±15 kV ESD protection adds resilience to frequently connected external leads. The 16-pin TSSOP package is useful in compact portable instruments. Keep the RS-232 traces away from sensitive analog sections and use the manufacturer’s recommended charge-pump and bypass-capacitor arrangement.

🌐

Remote Monitoring and Telemetry

For a remote monitoring enclosure, the MAX3221IPWG4 offers a compact path for configuration and telemetry commands over a wired RS-232 link. The 3 V to 5.5 V operating range supports low-voltage industrial electronics, and the integrated charge pumps simplify the power architecture. The 250 kbps rate is suitable for supervisory data rather than high-volume streaming. Use transient protection and an isolated or protected interface strategy when the cable leaves the controlled enclosure.

What are the key specifications of MAX3221IPWG4 that engineers should know?
The MAX3221IPWG4 is a single-channel RS-232 transceiver with a 3 V to 5.5 V supply, a maximum data rate of 250 kbps, and ±15 kV ESD protection. According to the Texas Instruments MAX3221 product page, it combines one line driver, one line receiver, and dual on-chip charge-pump circuitry in a 16-pin TSSOP package. Its 1 µA supply current is particularly useful for low-power serial equipment.
What is the operating voltage of MAX3221IPWG4?
The MAX3221IPWG4 operates from 3 V to 5.5 V. Texas Instruments describes the MAX3221 as a true +3 V to +5.5 V RS-232 transceiver, allowing it to interface with both 3.3 V and 5 V UART logic levels. The integrated charge pumps generate the bipolar voltage required by the RS-232 driver without an external dual supply.
What is the maximum data rate of MAX3221IPWG4?
The MAX3221IPWG4 supports signaling rates up to 250 kbps. According to the Texas Instruments MAX3221 product page, this rate is suitable for single-channel asynchronous RS-232 links in embedded controllers, industrial equipment, and data-acquisition products. Actual system throughput also depends on the connected UART configuration, cable characteristics, and receiver timing.
Where can I download the MAX3221IPWG4 datasheet PDF?
The MAX3221IPWG4 datasheet and ordering information are available from the Texas Instruments MAX3221 product page at https://www.ti.com/product/MAX3221. Use the manufacturer datasheet for the complete pin-description table, electrical characteristics, charge-pump capacitor requirements, and recommended layout. The product page identifies the device as a 3 V to 5.5 V, 250 kbps single-channel RS-232 line driver/receiver.
Where can I find the MAX3221IPWG4 pinout?
Use the pin-description table in the Texas Instruments MAX3221 datasheet to confirm the MAX3221IPWG4 pinout and connector assignments. The component is housed in a 16-pin TSSOP package, but its exact physical pin numbering is not published in the search results used for this page. Confirm logic inputs, RS-232 outputs, charge-pump capacitors, and ground connections before laying out a replacement board.
What can replace the MAX3221IPWG4?
MAX3221IPWR is a verified same-footprint candidate because it retains the 16-pin TSSOP package, 3 V to 5.5 V supply range, 250 kbps data rate, and ±15 kV ESD rating. It differs in its ordering suffix rather than in the core electrical interface. Confirm the exact temperature, packaging, qualification, and ordering requirements before approving it as a drop-in replacement.
Is MAX3221IPWG4 the same as MAX3221IPWR?
The MAX3221IPWG4 and MAX3221IPWR share the same MAX3221 device family and 16-pin TSSOP footprint, while the ordering suffixes identify different qualification and shipment configurations. The published descriptions identify both as 3 V to 5.5 V, 250 kbps, single-channel RS-232 transceivers with ±15 kV ESD protection. Verify the temperature grade and reel or tube configuration before substitution.
What is the best cross-brand equivalent for MAX3221IPWG4?
No cross-brand equivalent is established here that is confirmed to match all three critical constraints: the 16-pin TSSOP footprint, 3 V to 5.5 V operation, and 250 kbps RS-232 performance. A suitable substitute must also preserve pin-to-pin compatibility and the ±15 kV ESD-protection requirement. Use the Texas Instruments cross-reference search or submit the requirement through the Request a Quote form on this page.
Where can I buy MAX3221IPWG4 online?
Use the Request a Quote form on this page to request current MAX3221IPWG4 availability, quantity breaks, and lead time for the 16-pin TSSOP configuration. The part is listed by Texas Instruments as a MAX3221 family device, and distribution records identify it as a 1/1 full RS-232 transceiver in a 16-TSSOP package. Current stock and delivery terms should be confirmed for the exact ordering code.
What is the price of MAX3221IPWG4?
Current pricing for the exact MAX3221IPWG4 configuration should be requested through the Request a Quote form on this page. A unit-price reference appears in a marketplace listing, but it does not provide a complete quantity-break table, so it is not reproduced as structured pricing. The quote request allows the required quantity, 16-pin TSSOP packaging, and delivery destination to be handled together.
What is the lead time for MAX3221IPWG4?
Request the current MAX3221IPWG4 lead time through the Request a Quote form on this page. Lead time can vary with the ordered configuration, production allocation, quantity, and destination, so a general delivery figure would not be reliable. Include the required order quantity and any date constraints when submitting the request.
Is MAX3221IPWG4 in stock?
Current stock for MAX3221IPWG4 should be confirmed through the Request a Quote form on this page. Distribution records describe the component as a 1/1 full RS-232 transceiver in a 16-TSSOP package, but stock levels and shipment timing can change. The quotation workflow provides an allocation response for the exact MPN and requested quantity.
When should I choose MAX3221IPWG4 instead of MAX3221IPWR?
Choose MAX3221IPWG4 when its exact ordering and qualification configuration matches the device being qualified; choose MAX3221IPWR when that suffix satisfies the required temperature, reel, or shipment conditions. Both use the 16-pin TSSOP footprint and are described as 3 V to 5.5 V, 250 kbps RS-232 transceivers. The electrical interface is similar, but procurement and assembly controls must still be checked.
Is MAX3221IPWG4 suitable for industrial serial communication?
The MAX3221IPWG4 is suitable for industrial serial links requiring a 3 V to 5.5 V supply and data rates up to 250 kbps. Its integrated charge pumps eliminate a separate ±12 V supply, and ±15 kV ESD protection strengthens the connector-facing interface. Industrial suitability must still be confirmed against the device temperature rating and the system’s isolation, surge, and environmental requirements.
MAX3221IPWG4 vs MAX3221IPWR: which is better for a new PCB?
Both MAX3221IPWG4 and MAX3221IPWR use a 16-pin TSSOP footprint and provide a single-channel, 250 kbps RS-232 interface over a 3 V to 5.5 V supply. For a new PCB, select the ordering code that satisfies the required temperature grade, qualification, packaging, and purchasing conditions rather than treating the suffix difference as an electrical upgrade. Verify the final pin and marking requirements before release.
Does MAX3221IPWG4 need an external RS-232 power supply?
The MAX3221IPWG4 does not require an external ±12 V RS-232 supply because it contains a dual on-chip charge-pump circuit. The device receives a single 3 V to 5.5 V supply and generates the bipolar voltage required for RS-232 transmission. Decoupling and charge-pump capacitors must still be implemented according to the manufacturer’s recommended application circuit and layout guidance.

Data referensi kejuruteraan untuk MAX3221IPWG4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MAX3221IPWG4 when the system needs one RS-232 channel, a 3 V to 5.5 V supply, operation up to 250 kbps, and ±15 kV ESD protection in a 16-pin TSSOP footprint. It is a strong fit for embedded controllers, data-acquisition units, test equipment, and legacy service ports where PCB area and low-power operation matter. MAX3221IPWR is the closest verified same-footprint candidate and should be considered when its ordering, temperature-grade, qualification, or shipment configuration better matches the design. Do not substitute it without checking those conditions. No additional cross-brand candidate is established here because a valid replacement must preserve the footprint, supply range, data rate, and ESD-protection requirements. For designs needing more than one RS-232 channel, greater speed, isolation, or automatic shutdown, review a different device family rather than forcing a board change into MAX3221IPWG4.

Perbandingan dengan Gantian

Parametr Produk Ini MAX3221IPWR
Manufacturer Texas Instruments Texas Instruments
Package 16-pin TSSOP 16-pin TSSOP
Device Type Single-channel RS-232 line driver/receiver Single-channel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps
ESD Protection ±15 kV ±15 kV
Drivers and Receivers 1 driver and 1 receiver 1 driver and 1 receiver
Charge-Pump Architecture On-chip dual charge-pump circuit On-chip dual charge-pump circuit
RS-232 Compliance TI A/EIA-232-F TI A/EIA-232-F

Penyeberangsung Jelas

  • Single-channel integration in a compact 16-pin TSSOP package (vsMAX3221IPWR)
  • Low-voltage operation compatible with modern embedded systems (vsMAX3221IPWR)
  • Connector-facing ESD protection (vsMAX3221IPWR)

Catatan Desain

Place the charge-pump capacitors and bypass capacitor exactly as shown in the manufacturer’s typical application circuit, keeping each capacitor close to its associated IC pin. Route the RS-232 driver and receiver nets directly toward the connector while keeping them separated from sensitive analog and high-speed clock traces. The compact 16-pin TSSOP footprint leaves little routing margin, so verify every pad assignment against the pin-description table before releasing artwork.

Provide a continuous, low-impedance ground path between the transceiver, logic circuit, and connected RS-232 equipment. RS-232 signal levels are referenced to ground, and ground-potential differences between separately powered systems can impair reception or cause stress. A common ground does not replace isolation; use an isolated interface strategy when the connected equipment may have substantial ground-potential differences.

Do not treat the 3 V to 5.5 V MAX3221 supply range as permission to exceed the receiver’s permitted logic or signal limits. Confirm UART logic levels, baud-rate tolerance, cable length, connector wiring, and the remote device’s electrical characteristics. Also distinguish the 250 kbps maximum signaling rate from guaranteed application throughput, which can be lower because of protocol framing and receiver timing.

The MAX3221 uses charge-pump circuitry, so follow the datasheet’s recommended capacitor values and placement to limit switching transients. Keep the charge-pump loop compact and away from high-impedance inputs and precision analog front ends. If the RS-232 cable is long or routed near sensitive equipment, add suitable connector-side protection and validate conducted and radiated emissions in the final enclosure.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The ordering suffix includes a green-compliance indicator, but explicit RoHS, REACH, lead-free, halogen-free, AEC-Q100, and conflict-minerals statements were not published in the cited product summaries. Compliance fields remain unknown until confirmed in the manufacturer product documentation.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX3221IPWG4 datasheet MAX3221IPWG4 pinout MAX3221IPWG4 datasheet pdf MAX3221IPWG4 equivalent MAX3221IPWG4 replacement MAX3221IPWG4 cross reference MAX3221IPWG4 vs MAX3221IPWR MAX3221IPWG4 footprint MAX3221IPWG4 price MAX3221IPWG4 stock Texas Instruments MAX3221IPWG4 MAX3221IPWG4 250kbps RS-232 MAX3221IPWG4 16-TSSOP MAX3221IPWG4 industrial serial interface what replaces MAX3221IPWG4

Komponen dan Tanda berkaitan

Texas Instruments MAX3221IPWG4 MAX3221IPWR RS-232 RS-232 transceiver line driver line receiver UART interface IC semiconductor dual charge-pump circuit ESD protection 250 kbps 16-pin TSSOP TSSOP family surface mount TI A/EIA-232-F industrial serial communication data-acquisition equipment point-of-sale peripheral remote monitoring test and measurement equipment RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ