ADM203JN vs MAX232D Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ADM203JN disebabkan oleh Analog Devices dan MAX232D disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | ADM203JN | MAX232D |
|---|---|---|
| Merek | Analog Devices | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | High-speed CMOS RS-232 driver/receiver | — |
| Tegangan Pemberi Arus | 5 V | — |
| Transmission Rate | 120 kB/s | — |
| Driver Count | 2 | — |
| Receiver Count | 2 | — |
| Interface Standard | EIA-232-E and V.28 | — |
| External Charge-Pump Capacitors | Not required for ADM203 | — |
| DC-DC Converter | Onboard | — |
| Nominal DC-DC Output | 9 V | — |
| Logic Supply Type | Single 5 V supply | — |
| Kemasan | DIP-20 | SOIC-16 (D) |
| Terminal Count | 20 | — |
| Jenis Pemasangan | Through-hole | Surface Mount |
| Temperature Grade | Commercial | — |
| Cable Length Support | Extended cable lengths supported by high-drive-current outputs | — |
| Document Page Count | 6 pages | — |
| Datasheet File Size | 120 kB | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Operating Voltage Tolerance | [DATA_NEEDED: operating voltage tolerance] | — |
| Output Voltage Levels | [DATA_NEEDED: RS-232 output voltage levels] | — |
| Receiver Input Range | [DATA_NEEDED: receiver input voltage range] | — |
| Arus Dalam Tentera | [DATA_NEEDED: quiescent current] | — |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict Minerals Status | [DATA_NEEDED: conflict-minerals status] | — |
| Fungsi | — | Dual RS-232 line driver/receiver (2/2 transceiver, full) |
| Kadar Data | — | 120 kbps |
| Supply Voltage (Vcc) | — | 4.5 V to 5.5 V |
| Arus Pemberi Arus | — | 8 mA typical |
| Receiver Input Levels | — | +/-30 V tolerant |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Charge Pump Capacitors Required | — | 4 external (typically 1 uF) |
| Generated RS-232 Rails | — | Approx. +/-9 V to +/-10 V from internal charge pump |
| Compliance | — | TIA/EIA-232-F, ITU V.28 |
| ESD Protection (RS-232 pins) | — | [DATA_NEEDED: datasheet ESD figure] |
| Suhu Operasi | — | 0 C to +70 C (commercial grade) |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED: halogen-free] |
| Interchangeable With | — | Maxim MAX232 (industry-standard die) |